WILL MY DIY REBUILT M3 ENGINE START??

[@PerformanceRebuilds]

FOLLOW US ON INSTAGRAM instagram.com/performancerebuilds/

[@kevghhhlee414]

Fggg

[@peace4360]

Hello May I please inquire what's wrong with my e46 m3 if I start it and then the oil pressure is around 70 it shows a oil light red in Colour after I rev the light dissappears

[@The_journeyy]

Imagine rebuilding an engine and then driving it around, it must be so emotional knowing you did the work that made that possible 😍

[@abetuna2707]

i know that feeling :)

[@North441]

Is that worth to rebuild engine? And how much its usually cost

[@dmtoozer]

@@North441 most of an engine rebuild cost probably the labour so if u can do it yourself in house you can save alot of £££

[@Roseland8]

Doing this type of quality work without a lift or pit is very hard . Fair play lads great work

[@ratataran]

I'm sure these guys could afford a lift but find it gets in the way or something

[@AAShah24]

Marshallah, It’s awesome to see it running well and driving! Well done!

[@Braveheart7914-idfl]

Professionally done guys excellent in-depth work filmed to perfection you work hard and deserve to continue to prosper keep up the great work gives an on-site to what it takes to rebuild and save these iconic cars stay safe fellas 👍🏻

[@robswanson1040]

Great effort lads, there was a massive amount of work that's gone into this! Look forward to seeing it pop on the channel again in the Summer!

[@sohailjaned]

Zee is a bad man 👍🏼

[@smallmick6586]

How you remember where everything goes blows my mind !!

[@ShedLifeUK]

Found you guys a couple weeks ago and have been watching the engine build. From an E46 nut, absolutely cracking job! Nice to see an M3 be saved.

[@Elst07896]

Absolutely superb: Sounds like The Bat Mobile! Guys, respect is due - you're right when you say the engine sounds sweet. An excellent rebuild. 👍❤

[@COWKS]

You guys smashed it man, i had no doubt you would make it work. Special shout out to Zee, that guy is only young but so knowledgeable MashaAllah. I see big things for him InshaAllah

[@oren5889]

This channel is worthy of a million subs easy. Good camera work, not too much talking and “hey guys”

[@neogigo]

Great job gentlemen, I can’t wait until truly finish it with a paint job and interior detail cleaning inside

[@yhshah21]

Smashed it lads!!!! Man like Zee! Knows his stuff.

[@brucewayne2397]

You guys make it look so easy when actually its a mission and a half, well done

[@Mralism]

Ideal viewing for a Sunday evening...

[@simonmitchell7666]

That’s amazing. Such hard work and dedication. Think it’s time you put a lift in the workshop. Can’t wait to see what you do with this. Shame it’s going on hold but looking forward to whatever is next. Would love more regular stuff as love what you do. Keep up the good work guys.

[@johntheaccountant5594]

Really nicely presented vlog of the engine / gearbox being put back into that car and all the auxillaries connected up.

[@MrNwapp]

Result! Well done lads, and the videos are really excellent now. Bring on the next one!👍

[@danpricop6670]

...very hard and nice job,and best car ever,bmw e46 m3.

[@BrianRoediger]

This was such a great series. Very well shot, edited, narrated. You all are absolute pros. Very much wish we had a shop like you near me in the states. Keep up the great content.

[@liamhanmore8355]

Well done guys another beautiful bmw m3 saved👍🏻can’t wait for the new paint job!

[@mike69papa]

best engine project ever seen..good job guys...👍👍👌👌

[@German-Whip-V8]

Maximum respect for your hard work and knowledge. If I ever get one of these I will seek you guys out 💪

[@silvermane9370]

Great car waiting to be reborn! Well done on the engine work.

[@abdulhaffezghafoor]

MashAllah excellent I got weirdly nervous when you cranked and it didn't initially start but then when I fired up I was delighted. Keep it up guys.

[@claireparkinson2044]

Could watch this all day! Great work lads👍👍

[@BrucePierson]

Nice work on the engine rebuild. I fully expected it to start and run with no issues after seeing it go back together.

[@davidneighbors9933]

Absolutely Phenomenal Job! I Love The E46 M3! Way To Go 👍

[@seanoconnor5737]

Well done chaps, Done a good job.

[@konstantinostselios1129]

Awesome 👌 nice work 👍

[@RR-fv2uu]

wow the engine sounds nice and new

[@DSM2009]

Well-done guys that was an epic engine build 👏🏾👏🏾👏🏾

[@alainloup5720]

Best video youtube of all time

[@moshazza5684]

Zee has no limit to his skill

[@coultas99]

Great car..great engine...great vid lads

[@navg2735]

These guys do the repairs so clean and professionally, like factory. Well impressed 👍🏼

[@deekokeegan5990]

Want wait to watch this being restored lads 👌🏼👍🏻😎

[@eddieflores2852]

Outstanding job brothers!!!

[@harrysmyth1618]

Grt job on the rebuild ladz. Brilliant 👍🏼

[@LiamTaaffe]

8:02 Yes!!! Go on you good thing!!! This video made my weekend - 🤣

[@keeptraining3]

Guys absolutely unbelievable achievement, respect ✊🏾

[@G4RY1159]

Always a nervous moment Thanks again lads

[@AdeReeves]

Top work guys...another enjoyable series...

[@fizz8534]

Personally think the e46 m3 is the best one!!! So good to see another one back on the road! Good job guys 👌

[@dannyauto5901]

Well done lads , brilliant rebuild, enjoyed it very much, bring it back quick, can't wait to see it finished 👌👌

[@peterjohn5493]

Well done guys

[@uknomad1308]

Man been waiting for this! Excellent job once again!! Superb videoing music & editing always amazed! And working out of a humble garage... Seriously amazing work!!

[@jetstarsuk2364]

Amazing talent. Well done.

[@peterjohn5493]

Really interesting

[@volkanaksoy8927]

Great work

[@bluevanmani]

Fantastic job real professionally👍

[@OneNastyNinja]

Very well done

[@zunaids32]

Legends in the game 🙌🙌

[@steven907]

Brilliant job boys simply Brilliant

[@tna--]

nice work 👍 great rebuild 👍

[@saib8235]

Alahoemabarek.nice job guys.respect

[@thewhiteastra]

Well done lads

[@Nerojan]

Zee is a master of engine rebuilds! 🔥

[@최주원-r9c]

손재주가 좋다. 성공적. 대단하다.

[@MrSnooze]

Great work there. If there's no bore wear I've had excellent success with a good honing and re-ring. Sounds very nice with no unwanted noises. Fantastic result 👍

[@superk6487]

Quality lads 👏👏 Let’s hope all is well over the next few 1000 miles

[@carclub123]

great video

[@jamesgreen5899]

Well done guys awesome work

[@santiagoperulero440]

Good brot..👍👍👍

[@JuanPerez-tr9yn]

Andddd that’s why bmw don’t do good here in FL everything is damn near made out of plastic just dry rots with all the heat.. great jobs guys I just subbed! 👍🏽💪🏽

[@essbee8028]

Phenomenal job Keep it up lads

[@jambacardi2474]

Great engine work guys

[@vntagek3ys]

That sound ❤️😌🇩🇪German beast

[@PerformanceLifestyles]

Alhamdulillah a successful rebuild. You made it look fairly easy....I may try one too....NOT 🤣 Good work and content as always 👍

[@HollyBerryDOOG]

Great build, more difficult than most will realise 👍

[@_Kela]

Come on lads 👍🔥

[@Gamer84211]

Was waiting for the upload 👍

[@Drewmk-sc9zv]

well done guys,tbh i thought this one was gonna sting you in parts .sounds sweet 😀

[@craigbould7224]

Another great job guys, leaves me wondering if there’s anything you guys can’t turn your hands to

[@ricknorville2324]

I have to say lads well done 👍 you guys are amazing how do you remember what nuts and bolts goes were 👍 I cd Never remember what bolts go were and what to take off and put back 😂 enjoyed your videos keep up the good work you guys are definitely "Top Guys"👍👍👍👍 🤠

[@dgiroir6344]

Anyone got a extra heater you can send to these guys. They always look so freakin cold! Awesome fkin job. You guys know your shet! ✌

[@dappa311]

Yo you dudes are DOPE!

[@markbennett9043]

Another good video. Thought you might have runnit up before the full front end panelled up? You boys must be getting enough coin for a ramp. Now?

[@TheCatoLee]

Awsome filmimng guys ! Whats your setup?

[@smm6526]

Damn, epic...

[@colinalawi210]

guys please do youtube full time. it will pay more then your day jobs. you guys are so good to watch. you deserve more subs and promo from big companies.

[@noone9043]

Agree 100%

[@colinalawi210]

the M3 engine rebuild is porn on youtube! wow. great work. cant wait for the updates

[@vampalan]

Rear sub frame issues on the E46's, did you remember to check that?

[@Zed_Zone]

Nice work... Was anything done to the vanos which is a known problem on the E46? Looking forward to the next project In sha Allah.

[@trading-university.]

Good work lads. Whats the next project in the doors...Salvage prices are wild at the minute it seems, on the hunt myself and some silly prices

[@kenmcintosh3705]

What happens to the cars once you have finished them? Eg the blue 3 series and the C63 from wey back.

[@PerformanceRebuilds]

3 series is parked away until summer time and c63 is sold.

[@bobbob2659]

👍❤️👍❤️👍❤️

[@dating4564]

Nice job and you do clean work. Time for a car lift?

[@SvN8SiX]

Do you guys only work on your own cars or customer cars too as I've got an E46 330ci with a lack of power

[@philipp.o4892]

Today i tried to but my n55 Engine back in my 135i but i couldnt get it back in because the Engine and transmission is leaned to the Right. Do you have any tips for me to install the Engine back in? Never did That before

[@mr.nobody4553]

Really nice work ! But you could've installed a lighter flywheel instead of the stock one and use less the impact gun because you're overtourqueing the bolts and will cause problems in the future, but overall looks great 👏👍

[@PerformanceRebuilds]

We will be changing the flywheel but wanted to make sure the engines OK before we start buying new replacement parts.

[@mr.nobody4553]

@@PerformanceRebuilds It'a piece of art! Really Incredible job guys! Keep up the good work! And good luck of future projekts ✌👍

[@ratataran]

The trans on these cars is fairly easy to remove

[@dirtyleeds1458]

Great video guys editing is getting flashy 😂

[@Ali-raad-]

🤚👌👌👌

[@Marbella.187]

Good work respekt from Kosovos

[@Wristshot]

Respect due… how do you know where each nut and bolt goes!

[@Vgk36]

Fresh engine needs break in oil. CSL air box would be super sick!

[@mosezkhan2570]

Successful operation. 😂😂😂

[@darylmorse]

Nice to see the car back together. You guys are skilled mechanics, but you should not be working on cars like this without referring to the factory shop manual (TIS). If you did that, you would know that the bolts on the front axle reinforcement plate are single use and are supposed to be torqued to angle. As I said in the previous video, I will be shocked if this engine doesn't use oil, due to the DIY hone job on the worn cylinder bores. I look forward to seeing an update.

[@colinalawi210]

come to the rear world buddy. did you know that munufacturers reccommend changing the cars entire airbag system every 10 years? do you have this done? zee is an experienced mechanic. he knows what he's doing

[@darylmorse]

@@colinalawi210 The reinforcement plate is structural. The bolts are not designed to be torqued more than once. Same for the connecting rod bolts. Single use bolts are not that common on these cars. Do you really think BMW would say a bolt was single use if they didn't have a reason? Not saying he isn't an experienced mechanic, but he cut a lot of corners in the engine rebuild, like when he used the crappy DIY hone on the tapered cylinders. If you haven't worked on these cars, you won't understand. I own one and I've done a lot work on it, including rebuilding the VANOS, another step that was skipped in the engine rebuild. Failure of the exhaust camshaft hub (which drives the VANOS pump) can take out the entire engine with no warning. The VANOS is the single biggest ticking time bomb in the S54 engine. The rod bearings are the second biggest problem with the engine. Rod bolts are always supposed to be replaced along with rod bearings. My car got recalled a second time after the first rod bearing recall to replace the rod bolts, along with another set of rod bearings, because BMW downgraded the original rod bolt specification from multiple use to single use. Do you seriously think BMW would recall the car a second time to change rod bolts at their cost if they didn't think it was necessary? If a connecting rod bolt breaks, it's the end of the engine, as you saw on the original engine, with a broken connecting rod. Speaking of airbags, you must know about the airbag recall. On my car, the first recall was for the driver side airbag. The second recall was for the passenger side airbag. It came in twice for the passenger side. Once to replace the original airbag with the same part number and a second time to replace it with a new part number. Again, BMW would not do this for no reason. (Regarding routinely replacing airbags, I've never been told by BMW or Mercedes Benz that an airbag should be replaced on any of my cars only because it's 10 years old and I've owned several of each.)

[@hassenbeattie1339]

mate they say one time use but its a load of shit. I've had mine on and off that many times and re used the bolts and its been fine for the 5 years I've owned the car had no issues whatsoever. youre a fool if ur gonna spend 50 bux on new bolts every time u drop the Reinforcement plate 🤣

[@Mralism]

Soothing noises...