In this episonde we try to fit the fibreglass metro 6R4 bodykit to the body swapped/chassis swapped porsche boxster conversion project. Now titled Metro CarreR4
Пікірлер: 440
@geordie139922 күн бұрын
Loving this project,no drawings,no cad,no expensive fabrication or out sourcing. Just a man with a grinder and a dream.
@pedenconceptz21 күн бұрын
Thanks, it takes the METABO grinder for this sort of action. But yes, there is no high budget to be spent here… unfortunately! Lol
@andylewis736021 күн бұрын
@@pedenconceptz Just goes to show what can be done with a couple of unwanted old motors and a healthy helping of ingenuity! 😊👍🏻
@PracticalRecycling10121 күн бұрын
A man. A grinder and a dream. I like that turn of phrase.
@RetroYamaha21 күн бұрын
@@pedenconceptz one bit at a time until you see the bigger picture
@trevorkee14546 күн бұрын
Can anyone tell me where to buy this 6r4 kit?, Thinking about trying something like this but only if a can get all sourced first Thanks
@adamhaycroft561022 күн бұрын
Gearbox sticking a bit out the back is a full on no #### given racecar look, love it! Actually just in general love this project!
@pedenconceptz21 күн бұрын
Thanks, yes, I don’t mind the look…. Just that’s out far enough for my tastes
@alexjones829622 күн бұрын
Absolutely loving this. When I first started watching this (with my mouth agape) I couldn’t see how the hell you would marry these 2 together. Absolutely hats off to you, your vision, your skills and your ingenuity 👏👏👏
@pedenconceptz22 күн бұрын
Thanks, I wasn’t sure on a few things myself but it’s coming together!
@z-trip545717 күн бұрын
It's videotitles like this that get me excited. What a breath of fresh air compared to "EBAY COILS ON THE Z?!!! POPS N BANGS!"
@pedenconceptz16 күн бұрын
Thanks, yes it’s a pretty involved one, but hopefully should progress at a decent rate.
@purple-porker22 күн бұрын
I'm rooting for you mate, you have some serious talent and vision. My first car was a 1.0 Metro and one of my current cars is a 986 Boxster. I'm fascinated!
@pedenconceptz22 күн бұрын
I have vision anyway… not sure about the rest! Lol
@dermotmcloughlin960922 күн бұрын
The Petro is really looking well now! Some amount of work, thans for showing us the build. 👍
@endeavour212722 күн бұрын
I must admit I thought it wouldn't work but I'm now a believer!!😊, 💪
@pedenconceptz22 күн бұрын
I wasn’t sure myself until recently. I think the sills came in well that the skirts cover them
@daxxr253222 күн бұрын
Roll cage inside the pillars would be a good idea
@pedenconceptz22 күн бұрын
Yes, that would be the plan, although 35mm is an uncommon pipe size, and the one guy I’ve found who can do it, I might have to wait a few weeks on. But plenty else to do
@_autoverse22 күн бұрын
Even in this mocking up stage it looks spot on. Great progress with this episode.
@pedenconceptz22 күн бұрын
Thanks. 👍
@RichardAnderson-zt8mq3 күн бұрын
Jeez - this is a project and a half. Really admire you - this is excellent work! Thanks for sharing this, and Hi to all of our good friends throughout the island of Ireland - so many good memories!
@brocks55521 күн бұрын
Twisted genius! Loving the progress and whole thought processes involved! Great video
@pedenconceptz21 күн бұрын
Thanks, hard to know how much info to put in a video
@brocks55521 күн бұрын
@@pedenconceptz all of it! This sorta build brings out my inner nerd… 6R4 is iconic to many folk so interest in a road going version should be really high… plus the way you’re going about it is nuts!! In a good way! 😎👍
@josephpressinger152522 күн бұрын
The progress in one video is amazing! loving the build so far :)
@ColinSpencer21 күн бұрын
Coming on well. I do like your problem solving. Looking forward to your next video.
@ShiroiYuki.18 күн бұрын
This looks absolutely mad! I wish you major luck in getting that kit fitting well!
@superblackbirdrider21 күн бұрын
Ok, I'll admit I was sceptical about this (see my comment on the previous episode) but this is looking "doable" now. Hats off to you 👏
@pedenconceptz21 күн бұрын
Yea, I am really impressed with the boxster chassis, discarding it to build something out of the metro I think would have been a downgrade… unless your planing on building a completion car like Rover did
@IanClarke-hl4ud22 күн бұрын
Loving your work and vision mate. I can't wait for the next video
@danielcgomez21 күн бұрын
Great progress! ...It's looking very much like the 6r4! ...keep it up!
@TiSwAs7322 күн бұрын
great vision with this build and amazing progress keep content coming and good luck!
@nickpace388821 күн бұрын
Absolutely brilliant series, you both the vision and the ability I am so impressed
@pedenconceptz21 күн бұрын
Vision yes, ability… debatable!
@SilliArt21 күн бұрын
Love the way this is going. Really like your methodical approach and the way you explain everything. Top project, keep it up.👌
@pedenconceptz21 күн бұрын
Thanks, it’s difficult to know what to include, fine line between info and making it boring, I think anyway
@TheElcustard22 күн бұрын
Loving the project. You've made great progress.
@moskaski22 күн бұрын
She's taking shape! Good job
@markburns254521 күн бұрын
Actually looking like a 6.r.4...massive respect 🙏, brov, your doing a top job....respect....the metro's .we're dog doo dar....back in the day.....the re build will give it a true sense of meaning...keep doin what you do.....shabba...😊😊😊
@andylewis736022 күн бұрын
Just started watching this project series. Loving the way you’re rising to the challenge and looking forward to seeing how things progress. Thanks for explaining your thinking at every stage. It makes it all the more interesting. Good on ya!
@pedenconceptz21 күн бұрын
Thanks. It’s hard to know. In the last video I had people say there was too much talking and others that liked that part.
@andylewis736021 күн бұрын
@@pedenconceptz Don’t try too hard to please people, mate. You’ll end up pleasing nobody and lose the essential charm of the channel. They should think themselves lucky you give ‘em time lapses! 😁 Just do what feels right, enjoy the positive interaction and ignore the negative Nancys - I doubt they’d ever have the guts to lay into a Porsche with an angle grinder! 🤣 I’m not sure I heard you mention what you’re going to do with the car once you’re done. Are you planning to do rallies or will she be a road car? Keep up the good work! 😊👍🏻
@pedenconceptz20 күн бұрын
Thanks, it’s going to be a road car but I fancy the idea of a track day in it!
@andylewis736020 күн бұрын
@@pedenconceptz Sounds great! I remember seeing a few 6R4’s in tarmac spec hammering it around a few stages and the odd circuit. Your project should have a lower COG too! Have you put any thought into whether you’ll get the motor “breathed on” or are you planning to keep it stock?
@ChopsGarage21 күн бұрын
Loving this project, making cracking progress
@waymanbarneyawesomecardude956122 күн бұрын
Love the progress you've made, it's going to be awesome
@chriscordray857217 күн бұрын
Nice work Thomas, 👏 the fruits of ur labors will soon ripen.
@richardtye337021 күн бұрын
Totally awesome project and video! I doff my cap to you and your talent......old school proper engineering talent. Looking forward to more videos
@pedenconceptz21 күн бұрын
I wouldn’t mind a bit of modern talent though. I might have to invest in a few new tools and such
@meandcolin22 күн бұрын
Looks fantastic, loving this build.
@RZRBLAZ14 күн бұрын
I instantly subscribed after seeing your thumbnail. Good job and good luck! Look forward to more vids from you!
@robwright384511 күн бұрын
Wish i lived clise to your area because if i did i would be on my knees begging you to let me help with this amazing project, simply because ive always loved the look of the 6R4. I owned a metro once which i purchased from my sister for £50 when i was around 14 i beleive (im now 41 so a few moons ago😂) and my intentions were to put it in the garage, get the 6R4 kit and make a ptoject out of it, unfortunately it never happened and it ended up at the scrap yard after sub frame snapping among other things. Wish i was there with you man because as i said this is a awesome project and cant waith to see it finished, i wish you all the luck in world my friend
@ClassicMinishorts22 күн бұрын
I'm extremely impressed with your vision and ability to see where you can cut to make this feasible. And also nothing seems to phase you, good luck with it🤞
@pedenconceptz21 күн бұрын
Well as somebody told me once it’s only metal, so in ‘most’ cases it’s possible to undo your mistake if you make one…. Just more work
@ClassicMinishorts21 күн бұрын
@@pedenconceptz yes for sure it's all about confidence, and also welding skills!
@Mickyrst433 күн бұрын
1st video I've seen from you,just subscribed,great project!
@conkinnear726922 күн бұрын
When I built my replica I fibre glassed the tailgate skin onto the original steel tailgate, worked perfectly. Had to adapt the door light recess's slightly and welded and welded some sheet metal onto the bottom of the door for added strength behind the number plate section.
@pedenconceptz21 күн бұрын
Excellent, I think I have my tailgate from the same place as yours, so at least I know that will work. Although I do have the later tailgate to start with
@andrewjohnson989620 күн бұрын
Wonderful video, looking forward to seeing the rest of the build.
@pedenconceptz20 күн бұрын
Thanks, trying to get a little better with each video!
@stevenharpervw18 күн бұрын
Fantastic project. It’s amazing how it looked really like a metro once you cut the front and rear overhangs off
@pedenconceptz18 күн бұрын
That’s why I couldn’t look at the overhangs any longer, really was questionable about the front fitting until I seen the old bit cut off.
@soggybawsmoto22 күн бұрын
Taking shape, great video 👍
@denisbassom17214 күн бұрын
What a totally insane idea, congratulations sir.
@TheNorthernmunky21 күн бұрын
Brilliant work mate, I’d love to do something like this, might give it a go now!! Thank you
@DanielBall13 күн бұрын
Great build so far, keep up the good work! Subbed!
@danielleekirkpatrick857922 күн бұрын
That sill will be fine like that. 👍🏻. Loving the build 😎🤙🏻👌🏻
@pedenconceptz21 күн бұрын
Yes, I’m inclined to think so. You can tell even when you jack it up, it’s very sturdy… plus it will have a roof
@williamh664222 күн бұрын
its looking bang on already mate fingers crossed you can sort out all the little bits and bobs and getting fitting even better 👍
@russellhammond43739 күн бұрын
Good luck. It is a project I could never dream of doing.
@telecomwiz200421 күн бұрын
I love everything about this project.
@leeevernden20 күн бұрын
Wow! what a project, looks awesome already. Well done!
@pedenconceptz20 күн бұрын
Thanks! It’s starting to look like something!
@Mk2fSaloon22 күн бұрын
😂🤣😂 The international tool of arch measurement 🫳🏻
@pedenconceptz21 күн бұрын
Never seen a tradesman use a tape measure yet… it’s number of fingers
@GUY911518 күн бұрын
Well done, and what a project……. Just awesome
@dannyconway261222 күн бұрын
Great video, great content, I'm loving following this build, cant wait for the next one. 😊
@pedenconceptz22 күн бұрын
Thanks very much, appreciated!
@01bogwoppit21 күн бұрын
Love this build , love your enthusiasm. Keep it up 👍
@pedenconceptz21 күн бұрын
Il tell my wife you said I was enthusiastic, she might not agree! Lol
@superseven794722 күн бұрын
Looking forward to following this build! Going to be pretty nice especially with flat 6 note from the boxster engine. Owned a 987 2.7 manual some years back and was a good car, enough power and nicely balanced for handling. Never imagined someone would pop a metro body on one😊👍
@pedenconceptz22 күн бұрын
And this should be a good bit lighter, I did enjoy driving it before I chipped it up.
@erikpetermans15 күн бұрын
Just found out about this project. I love it excited for more!
@37skyway22 күн бұрын
Cracking project love the whole process 👍
@jamierobertson973321 күн бұрын
Yeah agree with lots of the comments...Great build, loving the updates, keep them coming. You dont seem to be phased by any part of this project!!
@nathanchalecki484221 күн бұрын
Great work man, looks amazing
@mrwhite293021 күн бұрын
Love it mate thanks for taking your time to film it all
@pedenconceptz21 күн бұрын
No problem! Makes it a bit more interesting for me!
@mattmarshall74722 күн бұрын
That looks awesome. Love it. Great work 👏
@ste187219 күн бұрын
Wow its going to look awesome when all done I'm new to your channel and looking forward to watching more episodes 👍🏻
@pedenconceptz19 күн бұрын
Thanks for watching, yea, I really do hope it turns into something quite nice!
@paultk7712 күн бұрын
Hat off to you ! 👍🏻 loving your build 👍🏻
@stephenr642720 күн бұрын
Thank you to the algorithm for this video what a great project and what great work you are doing thanks for sharing it with us
@pedenconceptz20 күн бұрын
Thanks very much, I’m glad you found your way here! 👍
@SuperLuckyCat712 күн бұрын
TMIUATGA; They Make It Up As They Go Along. Ol' School Hot Rodding. Impressive and inspiring 🏆
@jtyoung70615 күн бұрын
This looks like it's going to be a fun driver!
@calhun156721 күн бұрын
Quality bud! Looking forward to seeing your build progress!
@davidcooks526515 күн бұрын
This looks a job and a half! Be good to see it finished 👍
@_marcus_does_22 күн бұрын
Love it. Keep trimming away. Gonna be wild
@phillcampbell550122 күн бұрын
Hi. Great to see another northern Ireland car nut! Lol I done something similar a few years ago, dropping a puma body over a shortened sierra xr4x4 floorpan. Worked out really well. Love the petro! I did notice something about the a piller/door ideas. If you move the hindge point towards the centre of the door, that will mean the door skin has to clear further into the a pillers when the door opens. If it was my project, i would keep the doors standard and modify the piller/sill areas to suit. You have to do this anyway so why make more work for yourself. Plus, if you are going to fit a 35mm cage and hide it in the a piller/roof pillers, that will put plenty of strength back into the pillers. Looking forward to the next video.
@pedenconceptz22 күн бұрын
There is a box section with boron steel in it behind the pillar, if I cut it I’m not sure if I can weld it. I’d rather leave it be, put it like that. I am aware of the pivot point, I’m intending to get different hinges or alter the ones I have.
@KipppopotamusJR22 күн бұрын
Enjoying how fast these videos are coming in
@pedenconceptz22 күн бұрын
Well needing to do the videos helps push the project on I find
@nuclearmedicineman627017 күн бұрын
This is one of the weirdest body swaps I've seen. I love it.
@pedenconceptz16 күн бұрын
Thanks, hopefully the result will be pretty good though!
@Mr_guernsey_explorer1809 күн бұрын
That one kind of a build that love it your own man hours doing it be watching more
@21JaRNo21 күн бұрын
That is one cool looking portro!!
@TheOrgonaut20 күн бұрын
much respect for this project !!!
@bwhaggis19921 күн бұрын
This video just showed up on my home page looking forward to see how you progress and i have subscribed so good luck dude
@pedenconceptz20 күн бұрын
Thanks very much for watching!
@roguetrooper100021 күн бұрын
Awesome build. Love it 😊
@3sheds21 күн бұрын
Dare I say it, could you move the shell back again about 3-4mm? It would help that front arch centre over the wheel and reduce the gap from the arch to the door hinge point, AND bring more of the gearbox back under the rear of the body, but at the cost of the rear wheel being less centred in the arch? (Then add some plastic back into the rear arch and re-centre/cut the hole?) Lots of work now, but worth sorting so that you dont stare at the bits you dont like when its completed.
@pedenconceptz21 күн бұрын
If I move it back the front arch gets worse. If I move it forward the gearbox gets worse. I think this is the spot for it, a little fibreglass work to the front wing and it will be fine…. I think. Either way I won’t be staring at it’s wrong, if it’s not right it will get re done
@DaDa-David3 күн бұрын
Fella this is just awesome, lovin it!
@155Ringman21 күн бұрын
Coming along nicely, getting the main dimensions properly sorted now will pay you back later with less fettling of the bodykit and alteration of the lines. Love the plan to put the rollgage inside the pillars like the original 6R4 too, in reality, you need all the room you can get and it's no bad thing to use the same solution.
@pedenconceptz21 күн бұрын
Yes, I don’t think I’m too far away now. Maybe up/down at the back or front, I don’t think il bring it any further forwards, it’s starting to get more complicated the further I go
@timfaulkner85215 күн бұрын
Top build, started watching shine autos start an xr2 shell on a audi TT, build went on hold many moonz ago now, gona follow this fella, some great fab wrk, 👍 💭 thinkin outside the box 👌
@pedenconceptz14 күн бұрын
Shine automotive, yes I was watching that myself
@timfaulkner85214 күн бұрын
@@pedenconceptz good lads but they've taken on other big jobs, itl never get finished now 😢
@arghjayem8 сағат бұрын
Lol this build kinda reminds me of the KZbinrs who took an old mini and whacked a massive engine in it whilst rebuilding it!
@pedenconceptz8 сағат бұрын
That’s project binky, it’s a very famous project, they put a celica gt4 engine in it, I believe it’s nearly finished but they did start it 10 years ago
@Kanjo_Retired19 күн бұрын
absolutely loving this build. being a fan of the 6r4 for many years, only ever owning an '86 mg metro im loving this coming together! in regards to reference id recommend looking for the 'real vs rep' 6r4 video for getting gaps and lines and other things that may help as it gets in depth regarding a few things. All the best!
@pedenconceptz18 күн бұрын
I’ve watched all the 6r4 videos including that one. Yea, they sort of are what they are, but I intend to just adapt it whatever way I need to for it to look the way I want.
@kieranjamieson18 күн бұрын
This is looking great, the lack of gaps between the shell and floorpan at the rear is very impressive.
@pedenconceptz18 күн бұрын
If the rest of it fitted like that it would be great but if course the rest will take some work. But ultimately I want it fitting together like that everywhere, eventually
@kieranjamieson18 күн бұрын
@@pedenconceptz Keep doing what you're doing, if you can keep this work rate up "eventually" wont be that far away! I just noticed how many views your last two videos have got, congratulations, you deserve it.
@pedenconceptz18 күн бұрын
Thanks, I really wasn’t expecting the views that it got, I had thought I’d have got some experience making the videos better quality before any real number of people watched them, but I certainly can’t complain.
@sibarnby3821 сағат бұрын
Awesome project, love a 6r4. Would be interesting to see the kit without the block on the door, just front arch and rear arch
@pedenconceptz8 сағат бұрын
I’ve seen some like that, it doesn’t look as good in my opinion
@Rich77UK16 күн бұрын
This is proving to be an epic build. My favourite and arguably the most bonkers group B rally car replica built on arguably the best small(ish) sportscar of the last 30 years.
@pedenconceptz16 күн бұрын
Yep, that was my thoughts, hopefully when I get it all out together nothing is lost in translation.
@bobbyrosa465218 күн бұрын
i think this build is a brave undertaking. I have one consideration. moving the pivot point on the doors will mean that the skin of the door forward of the pivot will make contact with the body by virtue of the throw of the door. im sure you can resolve it by removing the a pillar to the unibody bottom & use the metro a pillar structure and weld that on to the boxter frame. Either way I wish you massive success! Its a wicked ride!
@pedenconceptz18 күн бұрын
Thanks, I had talked about the hinge and perhaps the need for a new one in an earlier video, possibly the second one although I hadn’t elaborated on why. But yes you are indeed correct and I ‘think’ I have a solution, but that will be when I tackle the doors. Thanks for watching!
@DavesDiscoveriesChannel22 күн бұрын
Great progress 👌
@jakemallory423922 күн бұрын
Loving the build. As for the door i would just tig a strip of metal to extend the door skin forward. then use a scribe to mark a 1/2" gap then cut it. saves having to move the door forward. unless you are willing to spend hundreds of hours on the roof, widening is crazy. even done super well the flex causes it to show back up in a year or 2.
@pedenconceptz21 күн бұрын
The size of the door I don’t plans to change, but rather the wing as the fit of it needs work anyway. And fibreglass can be easy to work with in that respect… although difficult in others
@itzandylee439715 күн бұрын
Just subbed This works it's going to be insane 👌
@TheDIYTuners19 күн бұрын
Nice work. Everyone needs to stop overtaking my 6r4 project 😂
@pedenconceptz19 күн бұрын
I had been watching it!👍 You need to get back on it!!!
@TheDIYTuners19 күн бұрын
@@pedenconceptz I've just been away with work for 2 months hopefully get back to making some videos and progress 👌
@KGBCUSTOMAIRBRUSH16 күн бұрын
Ladies and gentlemen. We have just found the creator of Frankenstein 😊. You my friend are a absolute genius. Love this build
@pedenconceptz16 күн бұрын
Frankenstein yes, genius no, but il certainly take the compliment! Thanks
@Wippit-vxr15 күн бұрын
Frankenstein is the name of Matt greens 6r4 build 🤣 he’s built one of these in his garage on a Subaru 4x4 chassi 👌
@michaelhutin545122 күн бұрын
You've made amazing progress. Loving the Range Rovers in the background.
@pedenconceptz22 күн бұрын
We do like a Range Rover round here to be fair!
@adrianncharles43620 күн бұрын
Enjoying this project
@cloudninephoto22 күн бұрын
Big thumbs up from me. We love our motor sports here in Ireland/N.Ireland. NW200 this week 😊.
@pedenconceptz22 күн бұрын
I can’t see me getting to it, il be in the garage I’d say! Lol
@-Astro--21 күн бұрын
Nice project 👍 I've subbed
@karter535121 күн бұрын
Great stuff. There is a lot to overcome with regard to those door shuts and pillars, but I sure you'll crack it
@pedenconceptz20 күн бұрын
Provided I can get the hinges/new hinges to work I think it might not be too bad.
@user-ux3kf1iw3v22 күн бұрын
Nicely done
@ronnieteulon19 күн бұрын
Love the way this is going
@davorhamzic522316 күн бұрын
killer content loving it keep it up
@nekton992820 күн бұрын
Man I hope with every bit of what I have that you will see this project through. Earned a subscriber with this one!
@pedenconceptz20 күн бұрын
Thanks, I’ve spent all my money on it so Il have to see it through
@ZafiraSteve22 күн бұрын
I have no suggestions as you are doing a cracking job already buddy
@pedenconceptz22 күн бұрын
Thanks very much
@balforitown427419 күн бұрын
Great job following with interest, Since I first saw a 6r4 in Cirencester Park on RAC rally in 85 or 86 can’t remember which ,But it’s allways been my dream car despite mates saying 6r4 was shit I’ve loved it and still do, But now at 60 I think I’m going to miss out owning one,Never the less keep up the great work.
@pedenconceptz19 күн бұрын
That’s why I have to make one, there’s just no other way I’d get close to a real one now, but it will be close enough for me! Thanks