Williams Mobile Clutch Service. Week 06/03/23. Video Log.

07376369067
www.williamsmo...
Support the channel:
www.paypal.com...

[@WMCS]

www.williamsmobileclutch.co.uk 🇬🇧 Contact us for your clutch replacements. Thanks to our KZbin customers this week for the repairs. A big thank you to all our subscribers and viewers of the show. 🎉

[@Anam.Hussain]

Hi William, i am trying to reach you but the number keeps going to voicemail

[@koszynek]

You are my inspiration, 30 years ago I also repaired cars in this way, often lying on the ground during frost or rain. Greetings from Poland.

[@williamtelford1]

You are such a hard working professional Kevin. Not to mention your attention to detail is admirable. Keep up the good work.

[@WMCS]

Thank you very much for the feedback. Much appreciated

[@Onehostgetlive]

Only a professional like you can do this job in such unusual conditions. Great job))

[@WMCS]

Thank you., feedback means a lot. Really appreciate the support

[@giuseppecodella9476]

Number one... It's a pleasure to watch you work😂😂😂😊😊😊👍👍👍 Greetings from Italy

[@johneturbo]

Very impressive working outside. One of my first big jobs was changing the clutch on a mk3 escort van I was only 18 back then! I did it on a busy road! That hydraulic lift looks really handy and safe. Have you ever thought about having a pop-up gazebo for when it's raining. Keep up the good work💪

[@garylenton8359]

Wanted to thank you kevin for the bmw clutch replacement on Thursday. The car now drives a dream thank you I also highly recommend you to friends if they need a clutch replacement

[@WMCS]

Hi Gary. Thanks for the feedback very much appreciated. .

[@barry5138]

Kevin, your efficiency is beyond words. Excellent work

[@WMCS]

Thanks for the feedback Barry. Much appreciated.

[@aretuseosr1]

Complimenti per i lavori svolti. Non è facile lavorare in strada senza ponte sollevatore. Impressionante come alzi il cambio con le braccia e le ginocchia.bravo Saluti dall' italia ti seguo sempre da meccanico a meccanico.

[@daniyalhabibchaudhry]

You are such a competent mechanic. I could only imagine how difficult it would be to be working as a mechanic and also producing such a high quality content. Keep up the good work mate

[@nervion57]

Buen trabajo como siempre 💪🏼

[@marcorav5080]

I'm about to change out the slave cylinder for a clutch on a 2008 Focus, because it's filling the housing up with brake fluid... Thanks for the video mate.

[@markt5426]

Hi Kevin, I see that you had a busy week and the weather was not helping you. But as always, you managed to sort your work out even in the snow. Keep the videos coming in and thank you, once again for sharing. 👍

[@WMCS]

I really appreciate the support and feedback. It means a lot the words of encouragement.. thank you.

[@2strokecherry]

Best KZbin mechanic on KZbin No talking just getting the job done

[@WMCS]

Thanks for the feedback. Much appreciated.

[@nachocm4870]

Fantástico trabajo. Enhorabuena!!!

[@WMCS]

Thank you.

[@rodgiles9353]

Hi Kevin You are amazing ….the skill and speed you replace any cars gear box………..I am not a mechanic but I have done G/B replacement to my own car……took me ages. You gotta be fit to do what you do day in day out…..well done. I was thinking while watching you working I see you have a diesel heater…..great idea. As a suggestion you could use a pop up gazebo to keep your tools and gear dry also keep the rain off your ground mats. Take care pal and keep your video’s coming. When my clutch needs replacing in future……..your the Man….great work.

[@WMCS]

Thank you for a generous feedback. Only thing with pop up gazebo is the risk of the metal legs scratching the vehicle is almost guaranteed that’s the main reason I’ve opted not to use it. But great suggestion otherwise

[@rodgiles9353]

@@WMCS Hi Kevin.. yes you are right about scratching customers cars……definitely a No No. What I did with my pop up gazebo is I bought foam pipe lagging from B&Q ……wrapped them around the legs and taped them on. Have you seen foam pipe lagging…….it has a spit along the length of it. This works fine for it’s purpose. They will slide down the leg when folded….and looking at your van tool layout it looks plenty big enough to lay it on top of your tool box. Just a suggestion as getting wet or soaked when working is miserable but they are easy and quick to erect and fold down. I know it is one more item to prepare but well worth it.

[@vwwrenchie314]

be glad for you when Spring arrives....not just on the calendar.. Adventures of the Clutch Ninja continue......😎🇨🇦👍🍺

[@SlimTortoise]

Excellent work and in such s*** weather too.

[@stevesmith4596]

Kevin, you are awesome!!!! You should be a WRC rally mechanic, the speed and accuracy you work is incredible!!! Stay safe fella!!

[@WMCS]

Thanks for the feedback

[@cbozz7063]

btw you deserved my sub. youre a very hard worker. I work on my own cars at home. I can sort of relate esp when its raining and freezing outside! Stay healthy and keep warm and dry! great content

[@WMCS]

Thankyou

[@classicmechanic9824]

Always a plesure to see how skilled you are. Keep up the good work :) .

[@WMCS]

Thank you for the feedback

[@eddieMurphy11111]

the back of the car being on a bit of a ramp it this was the case gave you some more room to work keep warm and keep safe . thanks for the video

[@WMCS]

A very fresh week. Nothing like some very cold rain ☔️ 😁.. thanks for the feedback always 🍻🍻

[@peterarries7879]

First time I've seen you with a cuppa, well done to the owner and great work as always

[@WMCS]

It definitely was a nice little gesture from the customer.

[@damian4556]

In a sport that involved wrestling people on the floor I don't think you would ever lose a fight lol

[@WMCS]

😁🤭🍻🍻

[@mattsilver8519]

Thanks Kevin as always for your upload have a great weekend buddy 👍

[@WMCS]

Really appreciate it Matt ..🍻🍻🍻

[@raitshots]

💪😎👍

[@raitshots]

Well don work season Willian . Hold on 👍😎

[@tomypinard-v5w]

force a toi , tu ai très impressionnant , un bon courage venant de France , ne lache rien !!!!!!!!!

[@WMCS]

Merci beaucoup

[@carlosnavarroroldan1872]

Gran profesional !!! 👏👏

[@zulugula6030]

Hello master! I can see that this job is your passion. I also go to people and repair agricultural machinery. Unfortunately, I don't have time to record and publish videos. I really like the recordings from the tour. Your country is beautiful. Best regards from Poland.

[@WMCS]

Thank you 🍻🍻🍻

[@zulugula6030]

@@WMCS 🤝🍻🍻🍻👋

[@adamap2796]

Brilliant mate, a grafter.

[@liviano9942]

You're always the best!!

[@WMCS]

Thank you. It means a lot.

[@garyr9185]

Hi Kevin Love your work I noticed you don’t ever lube where the throw out bearing slides on the shaft ? Is there any reason for that ? Keep up the great work, very inspirational ..

[@WMCS]

It doesn’t require lubing. It moves freely already. If anything it’ll be pushing the grease into the clutch

[@pablo123b]

mate you work so hard fair play....glad you got a heater! great work buddy

[@kris-english]

I'm thinking you should grab one of those lumbar supports (if you haven't already). I buggered my back doing work on cars and it's been 10 years ago that happened now. Still work but sheesh!

[@WMCS]

Kris I had one from a previous suggestion. It caused me an instant injury 😆🍻.. The side of the belt dug into my back muscle with all sorts of problems. I suppose it’s good when standing up. But thanks for the feedback. Much appreciated 🍻🍻🍻

[@tamiyafrog3220]

Awesome work 👌

[@WMCS]

Thanks much appreciated

[@kris-english]

That M18 is still truckin like a brand new one

[@WMCS]

Still going strong

[@kerbsiderecycling2694]

Top work as always 👍👍👍

[@WMCS]

Thanks for the words of encouragement. Much appreciated

[@senanfoutchedjev2401]

You are professional. I have positively commented on all your videos. Here you could have cleaned a bit the base before you put the new pressure plate and disk. OK. I can see that is cold out, that might be the reason why you are in a hurry. We should note that. Thanks.

[@WMCS]

Thank you for the feedback. I’m curious to know ., can you give me the time frame in the video pls. 🍻

[@senanfoutchedjev2401]

@@WMCS It was on the 2 car, the Ford, just before you put the new pressure plate, the base was heavy with surface dust, but now that I look at it. You might have cleaned it, just you stopped the camera and then continued with the video, it did look clean now, when I view it again. Thanks.

[@scotspie501douglas7]

wow wow no better man that can work in the snow and the rain

[@WMCS]

That’s it. 😁🍻

[@nutzyiron5318]

Very impressive i have no clue about how did you take the gearbox out without taking out the transmission... Good job!

[@WMCS]

Thanks. 😀

[@andy2297]

the weather is bad and the job is very good. Take care greetings! 🤜🤛 🙂

[@WMCS]

Thanks for taking Ito leave a feedback. Much appreciated

[@blvkbevrd]

Hi Kevin ! Please can you make an Amazon shop list with all the tools you’re using ? I’m interested to buy some of them, specially the floor mats

[@WMCS]

Sealey Pro.

[@marksutherland774]

The master at work.

[@WMCS]

Thanks for the review Mark. Always appreciated

[@ciprianionutapetroaie7314]

sall, it's hard for you to change the clutch putty on a car because you work alone, I appreciate what you do, approximately how long it takes to change the clutch putty on a car, with respect and esteem

[@WMCS]

Thanks for the feedback. Just to mention I really like replacing them putty 🍻

[@mikeyboy420bro]

something id shit my pants over, this man did it like a buddhist monk

[@WMCS]

Thanks for the feedback. Much appreciated

[@cbozz7063]

what is your longest time you had to work on 1 car? and if you could pick your top 3 hardest cars to work on which would they be?

[@WMCS]

1. Mini r50 supercharged. 2.Audi A4,5,6,8 3.Any car with a Citroen/Peugeot badge flowed closely by FIAT/Alfa Romeo. Longest repair is 8hrs straight nonstop Mini R50 supercharged.

[@РоманМюнхаузен]

Golden hands

[@WMCS]

You think .. or hard earned skills 🍻

[@РоманМюнхаузен]

@@WMCS These are not only labor skills, but also a working head

[@TheMasterRPG7]

Awesome work as usual, how do you go about taking the bell housing bolt out next to DPF on those 1.6 HDI engines? I do clutches on these at work and they are a pain! Lol

[@WMCS]

I’ve got full repair videos on the channel that I document them. Even on the Ford engines which shares the same engine/ gearbox 🍻🍻

[@TheMasterRPG7]

@@WMCS I find that the Ford 1.6's are much easier, gearbox in and out within a few hours on those ones!

[@maxthecaddy8451]

and that is a bitter cold weather 🥶thumbs up from me buddy 👍

[@WMCS]

Honestly Mike. At one point my prized diesel heater wasn’t standing up to the occasion.

[@maxthecaddy8451]

@@WMCS mate, i can believe that.

[@adamb9135]

Even with the last car the sun shone on you. Regards, Adam

[@WMCS]

That was a little blessing from above. To finish off the week. Sun finally came through in the last hour.

[@Shepster15]

just curios never see you drain/refill the gear box or bleed the slave? do you doo all of this im assuming

[@WMCS]

Subscribe and access full repair videos.

[@mariankopka1318]

nice work, im from poland and need reperain my seat alhambra 2004 1.9 :) on my country no normal mechanics :D hehe

[@WMCS]

Thank you. 🍻🍻

[@jeffgodon1335]

Hi Kevin You should have a big letter S on your T shirt,Your Superman.

[@WMCS]

Thanks for the support and words of encouragement.. means a lot.

[@petitdavid7691]

Hello Kévin, I am a home mechanic and I follow you regularly on your KZbin channel. I just have a question..when I work I lift my customers' vehicles using the reinforcements under the rocker panels that are more or less solid..and I see that you take yourself under the car! You are leaning on the side rails right? Never had any particular problem? Thanks for your feedback. David

[@WMCS]

Hi David. I use chassis for the main load bearing axle stands. Side sills are used for safety stands. But some vehicles have reinforced seal for the purpose of lifting the vehicle. Usually marked by a rectangle imprinted on the seal.

[@petitdavid7691]

@@WMCS thanks for your message! I will see the next time

[@bernardkress7758]

Bon travail 👍👍

[@WMCS]

Merci beaucoup ..

[@Gummets]

Love the channel. I considered asking you to do mine, but your site says no semi automatics. What's the reason?

[@WMCS]

Thank you. We can do the mechanical side of the work. But all semi autos are dictated by the module which needs software calibration and relearning after the repair is completed for it to run. And we just don’t have software for all the different manufacturers as they all charge a premium

[@mikelolaizola8770]

que pena que no trabajes en españa te contrataria sin dudarlo por lo eficiente que eres...

[@WMCS]

Thank you.

[@castrolgtx5064]

What a week you had there weather wise 🥶

[@WMCS]

Tell me about it. The diesel heater just about made a little difference .. but helped

[@vincent5525]

That 1 series looks like a pleasure to work on compared to the MINI.

[@WMCS]

Oh yeh definitely. It’s the sort of job I’d do everyday in my 70’s 🍻😁

[@jeanmarcparfaite64]

SUPER CHAMPION

[@240sxkid521]

Yo I just want to say I love your videos man I'm from the United States New York City got a big fan base over here as well love watching you love your skills that you have when you're changing he's clutches and everything else that you do keep up the great work

[@WMCS]

Thanks for the feedback and words of encouragement much appreciated., New York New York 🍻🍻

[@ovidiubuta4557]

Hi Kevin I saw in your video that the BMW 1 Series is very clean gearbox. I have a BMW 316d F30 2014 and the gearbox is the same but the gasket from the shaft for oil loses oil and needs to be replaced. Do you think it's normal or is there some malfunction inside the box? Thanks

[@WMCS]

It might be normal ..,

[@ovidiubuta4557]

@@WMCS Thank you

[@robblount1299]

Hi Kev(stig), have you thought about bringing merchandise out, work gloves, t shirts, hats etc with some kind of advertising/catchy slogan? If you do and make a few bob can i have some commission for the idea£££🚘👍🏼

[@WMCS]

Hi Rob. Drop me an email and we can take it from there. www.williamsmobileclutch.co.uk

[@bigdeal87]

just curious why you use the hydraulic ramp by the baby bmws ?

[@WMCS]

That’s correct. Only BMW’s

[@bigdeal87]

@@WMCS but why?

[@maverick507]

🧘it's the weekend you have to think of yourself 🛀💅

[@WMCS]

🤭🍻😂.. love it… I’m gonna include the head massage ..

[@maverick507]

​@@WMCS 💆

[@c_ibrahim_yildirim_c6737]

👍

[@BelzoGraphics]

What kind of hammer is that you are using nice boots btw

[@WMCS]

That is the hammer of THOR

[@BelzoGraphics]

@@WMCS Mjölnir?? Hahah Nah what one is it I’m needing a decent one

[@jamesporter4749]

Are you going to keep on doing the job you are doing until it is not possible (health issues/ too old) or going to retire early in the future?

[@WMCS]

Exactly that James. Until I cannot physically do it. Then I will drive around and back just because I love the travel to and fro as much as I enjoy repairing the vehicles.

[@bikesmart5279]

Top work as always👌 how many clutches do u normally do a week or day.

[@WMCS]

Just one a day now. But I used to do 2 a day. Sort of semi retired now.

[@radifumi3447]

Apparently the quality of Luk clutches has deteriorated, do you have any complaints from customers?

[@WMCS]

I can’t vouch for that hearsay. But one thing to note is there’s 3 line of LUK. The original which is Schaeffler ., which we use that is bought from a part shop. Then the budget which are re- manufactured and boxed as LUK the ones which you can buy off eBay or Amazon. I suppose you have to choose you sacrifice and live with it.

[@brunoklein4632]

you have to have respect, for taking that gearbox alone from a BMW.👍

[@WMCS]

Thanks Bruno 🍻🍻🍻

[@ghulamraza1700]

I got Skoda Octavia 2016 needs clutch replacement how much pls

[@alexanderturan6646]

It is like watching champions league football

[@fordbridgeautocentre65]

hi mate, what is the red lube you are using? thanks

[@WMCS]

Rubber grease.

[@tmicor7092]

Kewin 👍👍👍 !!!

[@WMCS]

Thank you

[@callumlazenby5544]

What’s the ramp called

[@WMCS]

Quick Jack

[@ferreiramiguel2910]

william one teacher

[@WMCS]

Hola hola 👋

[@adivarso8175]

hey

[@airbornerat]

still no1 💓

[@WMCS]

Thankyou.

[@rashidnaga]

no one can't lifting gearbox by hand.😱

[@markomikic6394]

Why you dont have big umbrela for rain days?

[@WMCS]

Mostly because it’ll be flying it like a kite 🪁