Williams Mobile Clutch Service. Week 27/11/23. Video Log.

07376369067
www.williamsmo...
Support the channel:
www.paypal.com...

[@WMCS]

www.williamsmobileclutch.co.uk 🇬🇧 Submit enquiry for a clutch replacement price. 0:09 2014 Volkswagen Golf 1.6L Diesel. 28:50 2018 Mini Hatch Twin Turbo 1.5L Petrol. 1:04:12 2007 Honda Civic Type R 2.0L GT petrol. 1:38:16 2008 Suzuki Swift GLX 1.5L VVTS Petrol. 2:10:17 2010 Ford Galaxy 2.0L Titanium X Diesel.

[@mancavemusician]

As an ex mechanic I can attest to the fact that (a) Its hard working in cold weather (b) Its even harder working on the floor (you have to be super fit to do this! (c) KAW is a superb mechanic (d) These videos must be difficult to make (think of the fact that he has to set up every shot / angle) and most of all (e) He's making something very difficult look easy, trust me when I say, a clutch job is not easy on a modern car. To remember the order or disassembly / reassembly is an art in itself. If Haynes Manuals were done in video form, then KAW would be the man for that job!

[@WMCS]

Thank you very much. It’s a very factual feedback almost precise to the T. Especially with the weather factor that can’t be explained., unless previously experienced.. especially working with metals in sub zero temp .. really appreciate the feedback once again. 🍻🍻🍻

[@xxxxx2147]

You know it’s cold when Kev has got the heater going take extra care in winter season. God bless you

[@WMCS]

Bone chilling cold … thank you for the blessing. Well received and very much appreciated. It means a lot…

[@mrjuergensie]

When I was a young man I did repairs as well. Today, at 60, that is no longer possible. Today the car has to be on the lift so I can work on it. God grant that your body will remain flexible for a long time. Your videos are inspiring and remind me of when I was young myself. Thank you for that 👍 and God bless you

[@Swimding]

Tradesman crafting his work, never dull.

[@kerbsiderecycling2694]

The king of clutches is at it again top quality work mate well done ,, i contact you january as need my van doing 👍👍

[@scotspie501douglas7]

once again Kevin a superb video and great to see the VW golf with no dual mass flywheel how you motivate your self in the rain great work

[@WMCS]

A few of them nowadays are reverting back to solid flywheel.. it’s not nice in rain ., but I always know this too shall pass.

[@mattsilver8519]

Hi Kevin hope your having a relaxing weekend I've just finished watching your upload as always I really appreciate it thank you 👍

[@Samwiseganja]

You are a legend, making these videos must take some real dedication

[@Galaxy2Galaxy313]

Thanks Kevin for a superb job on my Galaxy in freezing conditions. The whole process from quote to job end was very professional with great communication with Sally and yourself. Did a gentle 200 mile round trip the day after your work and everything is perfect. It was a pleasure to meet you and I'm recommending your services to anyone who needs a new clutch. Thanks again 🙏

[@WMCS]

Thanks for a great review. Kind regards. K-A.

[@MaroonPazymino]

Saludos bendiciones excelente semana a delante siempre con la bendicion de Dios

[@WMCS]

Thank you 🙏🏽..

[@TheLucozade1984]

Great job, im really impressed how can you change clutch on the street. Respect

[@oscarmontero5724]

Great work! As usual! Time has passed since I was able to watch your videos again. New things I have discovered are that you do not need to separate the front end in Minis. That saves time, I suppose. Thanks for the video!

[@WMCS]

Oscar ..!!! 😁, the older ones yes. But in a more efficient manner. But no more partially dropping the subframe.. Thanks for popping by to see the kids 🎄

[@oscarmontero5724]

@@WMCS I will stick to your channel the following 4-5 weeks, if I am lucky 😉

[@longnguyen-zu1qe]

❤ God bless you what you do for living in this condition 😊. We used to do the same things but with a gas portable heat in Canada. Minus 20c.

[@gerome64]

J'adore ton style de mécanicien d'embrayage

[@WMCS]

Merci … 🍻🍻🍻

[@markahad6583]

As always, great job, great video, Kevin-Albert. I have yet to see similar videos on KZbin like yours. One has to be almost super human to pull it off. Stay safe brother. 👏👍

[@WMCS]

Thank you Mark .. thanks again for the words of encouragement.. means a lot.

[@lasseystad3266]

Thank you Kevin. Cold week, hope your weekend will be warm and cosy. Regards from a very cold snowy Sweden.

[@WMCS]

Definitely tucked In and keeping warm .. hope all good your end and gearing up for a nice Christmas 🎄

[@lasseystad3266]

@@WMCS Working on it.

[@antn8387]

Hello, Sir Kevin-Albert. I just wanted to comment that your videos really inspire me to be a better DIY mechanic. I just swapped out my clutch on my car by myself after watching your videos & wouldn't have been able to if you didn't make these videos, though I took over a week! Anyways, I hope you have a nice holiday. Take care.

[@WMCS]

Glad to hear that

[@1daleym]

You are one smooth operator fair play! Making a difficult job look easy 👍

[@stevehamann9624]

I'm always amazed how he remembers every bolt. ….😱

[@train4905]

Please keep warm,and please be carefull bud,godbless

[@juanlopezmaldonado7934]

Este hombre si que es un profesional. Para mi gusto le faltaria una carpa para montar y tener el coche debajo en dias lluvioso

[@train4905]

Kev awsome work sir,as allways.😊

[@maxthecaddy8451]

its mad how the mini gearbox cooked it self like that kevin . 👍

[@WMCS]

It must have over revved so much it melted the pressure pin and cooked the fork ..

[@topfloorflat502]

Very very very very very good mechanic

[@WMCS]

😁🍻🍻

[@topfloorflat502]

@@WMCS 😊😊😊😊😊😊

[@aaronfrith5436]

Top respect great job on my VW 🙌🙌

[@WMCS]

😁.. there it is.. was just talking about your car🍻

[@aaronfrith5436]

Could sell it to you 🤷heard it’s got a good clutch in it ;)

[@cone6052]

You knows the job. Well done.

[@chrislowe2293]

Fair play mate doing this in that weather 👏 👍

[@tunnel7]

Wow that Milwaukee long handled power ratchet is brilliant AS ARE YOU get your gazebo up you will be ill when you get older trust me I know thanks and good luck in all you do TOP BLOKE.

[@WMCS]

It sure a nice bit of kit .. thanks for the advice 🍻🍻

[@mickyb4796]

Great video again, I have a quote from you for a insignia,I’m just waiting for it to start slipping so I can have it changed 😂 do you do other work ie drive belts and water pumps? Thanks

[@WMCS]

Thank you for that. We really appreciate the work you put our way. .. at the moment we only do clutches.

[@automaticosdovale-cambioautoma]

Lugar para chover e fazer frio hem!!

[@seanmcdonnell8437]

Good job as always 👍

[@WMCS]

Thank you.

[@xxxxx2147]

The mini has changed it’s design you must be so glad as no more front end to remove like headlights, bumper and move slam panel forward

[@WMCS]

I’m really liking this new design … it’s only the 2nd time I’ve done one. But definitely a massive improvement from previous generations

[@ancho6772]

Hi great videos I have been watching you since last year and like what you do it's very inspiring but also a great way to earn for your self. Where did u get the floor pads that u lay on the floor. They look really thick and comfy. It's better than waht I use 😂 cardboard

[@WMCS]

Oh noo. Not on cardboard. Interlocking mats off Amazon or eBay. If you’re in UK at Halfords.

[@ancho6772]

@@WMCS thank you. Yes carbaord is not ideal but I love the way your very neat and clean around the work you do

[@rene5257]

toujours imprionne de se que tu fait je fait pas toujours de commentaire mais je regarde j est fait un avc cerebral et sa tomber sur un oeil donc un peu misere a ecrit !! j espere que je vais rerrouver la vue sur mon oeil gauche bravo pour se que tu fait

[@WMCS]

Hope you’re fully recovered soon… You still managed to take time to show some support for the channel. That means a lot

[@pullman5250]

I admire you working outside in the cold rain …I’ve been mobile for 50 years outside in all weather and keep saying to myself there must be an easier way of earning a living . It’s hard on your body and clutches are very difficult to do on your back. Why ever didn’t they continue with that Vauxhall idea clutch change without removing the gearbox took me 30 minutes to do a clutch on one. Actually Vauxhall didn’t pioneer that idea it was Datsun now Nissan . Now I’m showing my age lol.. good luck and best wishes to you .

[@WMCS]

It is very hard work .. I suppose that’s why very very very few of us does it outside .. thanks for the feedback. Very much appreciated.

[@martinneale9797]

Legend

[@kamar317]

Super

[@robertluft7599]

Уважаю хорошая работа!!!🙂

[@Francisco-sx7th]

Hi, great job! You are extremely quick and efficient. Can you share the reference for your Milwaukee ratchet? Also your moving sockets are great. Same brand? Thanks.

[@WMCS]

They’re both fuel high torque specs.

[@Francisco-sx7th]

Great, thanks for your response!

[@ErgeanGe]

Un abonat vechi sunt ,te urmaresc de pe la început ,la tot ce postezi , sunt din România , noroc !

[@WMCS]

That means a lot. Sometime I do check the very early subscribers and try to reach out to say thank you… in this instance I’ll thanks for the continued support. 🍻🍻

[@MrCarhead]

Hi Kevin got a question I have a hyundai 120 2017 plate it does have clutch judder have u done many clutch replacement and flywheel if so are thay modified do u know?I'm a mechanic but just asking the question I have been thinking about changing it iv been told it's a common fault cheers Kevin love your work

[@WMCS]

Have done one or two clutches and DMF .. not sure what the question is. The i20 is a solid flywheel. I that case a judder will be down to a weak pressure plate ., not squeezing the clutch against the flywheel enough and it’s slipping under low gears. (Load ). And should be ok when cruising. Hope that helps.

[@adamr6780]

that looked close at the end lol new Land Rover discovery it looked like coming down blind bend at speed causing you to stop

[@WMCS]

I thought he was gonna go over in the ditch to be honest after he swerved me. I think you’re only one that noticed that 😁🍻🍻🎄

[@adamr6780]

@@WMCS haha yes I fully watch your vids right to the end as I like watching the different areas you go scenery etc as im all the way up in Bradford West Yorkshire 🙂

[@leecaddick8502]

Stay warm kevin. #legend

[@MBJeep]

TOP👌🖖

[@MrCarhead]

Still loving the vids what's the worst clutch u hate doing?I'm a mechanic myself and I don't like doing clutches even doing these on your back some of these boxes are heavy and u make it look fairly easy respect tho

[@WMCS]

Probably a mini r50 supercharged 5 speed box.

[@benkr5870]

Hey, do you always change the dual mass flywheel if the car has one if you need to change a clutch ?

[@csiszlakbela1958]

👍👍👍👍👍

[@gavTFSi]

Are there any gearboxes you don’t drain the oil from when doing a clutch change?

[@adamb9135]

Hello, is there any program that can be used to check whether the clutch is equipped with a dual-mass flywheel using the VIN number? Regards, Adam

[@WMCS]

The software I use does that for me .. I’m subscribed to most dealership software for parts.

[@droopy-R]

i need a electric ratchet too

[@Lui-893]

How in the hell does this magician do this in all weathers he is totally unique 😮

[@WMCS]

Stop it 😁🍻🍻🍻

[@Lui-893]

👍🥂

[@Tom74FFV]

Respekt....colega

[@WMCS]

Thank you .. 🍻🍻

[@joelawoyomi9102]

Is there any reason why you were covering your nose when working on clutches in the past but not anymore, are you now immune from clutch related health hazards?

[@WMCS]

What you don’t see is me covering up before disassembling the clutch and removal of the flywheel.. but I’m full covered up and would highly recommend it to anyone .. breathing that dust has zero health benefits to date.

[@damoblake6000]

Do you not show bleeding the clutch?

[@mdfkowoak-mo5mh]

😂😂ich bewundere dich du machst das mit geschlossenen Augen jeder schraube weiss genau wo sie steckt das ist unglaublich 😂😂 hast du nicht Rücken und Nacken schmerzen immer im liegen und angespannt?? Klasse Mechaniker der schnellste und beste kuplung profi😂

[@WMCS]

Thanks for the feedback. No muscle pain as of yet .. I’m usually not there during the process. I’m back after repair is done .. 😁

[@tmanda323]

Do u have to work in the rain? Watch your helth sir.

[@cirkin2876]

🙋‍♂️🙋‍♂️

[@l.aalberto586]

How much to replace clutch for fn2 type r civic live near in Bridgnorth

[@WMCS]

www.williamsmobileclutch.co.uk

[@PetePhantom]

👌🏻👌🏻🥶🤴🏼

[@maverick507]

Hey hello buddy No snow where you live?🥶

[@WMCS]

Heheh… not yet. But soon come 😁

[@smurfsmurf2295]

All weather Kev don’t how he does it we’ll done mucca

[@jimbojombo4464]

How many clutches do you fit in one day?

[@WMCS]

Just one .. and that one gets all my attention..

[@gnk9685]

Honda crv 2.2???

[@WMCS]

.

[@gnk9685]

Video change clutch Honda crv 2.2

[@TCB_gaming93]

One clutch by day ?

[@WMCS]

Keeps the doctor away

[@santigomez2105]

Hacer distribuciones tambien

[@WMCS]

What’s that

[@santigomez2105]

@@WMCS timing belts or timing belt

[@raffe65]

🫡👍🇸🇪

[@mdfkowoak-mo5mh]

Neue kuplung 😂😂

[@Bol-t]

Молодець. Я в захваті🇺🇦

[@WMCS]

Thank you 🍻🍻

[@kevinansell9341]

Do you see considerably more work in the cold months or just a slight upturn I wonder, Great work ethic as usual....

[@WMCS]

That’s correct. It’s usually a lot more work in the cold months and Han summer time.

[@VandungNguyen-c3h]

👍👍👍.