Winch Install on a 2022 Toyota Tundra TRD Pro...Zeak 13k Platinum Winch!...Wireless Remote Included

[@moez1774]

I cannot believe how detailed this video is! You have good video editing skills. Amazing!

[@NitroZ18Fishing]

Thanks man, I appreciate that!!

[@IndependenceOverland]

Hey man, I am curious now that this has been on your truck a while how the hybrid system handles it? When winching, do you experience the blower fans slowing down or any lights dimming? I would assume the hybrid motor system/battery is more than capable of producing the high amperage required for a 12v winching setup, but Toyota must have limited it to some extent. With a winch sometimes having up to a 500amp draw under maximum load, I am very curious how the truck handles it. Thank you!

[@g2theb584]

Well happy birthday man! I too will be 42 in April this year and luckily no senior moments........yet 😆. Winch is a nice accessory to have and finishes off that new bumper nicely.

[@NitroZ18Fishing]

Hahaha...thanks buddy!...I appreciate it!...and unfortunately I have more than I'd like to admit! 🤣

[@moundman16]

Great job. I'm expecting my Tacoma Trailhunter next month and was wondering how to do this. Hopefully it'll be about the same for them.

[@VicHmr06]

Love your videos. Very detailed and when I get my Tundra next month, I’m putting some of your instructions into practice. I was glad to see that you had no trouble accessing the clutch on the winch from behind the grill. I had wondered if that would require access from the grill and didn’t see how that would work. Mine will have the factory 3” lift, so hopefully I can reach a winch without a booster. 😂

[@NitroZ18Fishing]

Thanks man, I appreciate that!! Yea plenty of room to reach down in there to access winch, if the lift isn’t too high 🤣. Lemme know if I can ever help with anything!

[@stevefoltz3838]

Love your channel. I am not quite this confodent to tackle your projects but its fun to watch.

[@NitroZ18Fishing]

Thanks man, I appreciate the support!… If I can ever help with anything just say the word!

[@luny_mrg8868]

Since your disconnect switch is so far away from the battery I recommend adding an inline fuse near the battery as any wire between the switch and battery is “hot”. Also you could of use any ground location in the engine bay or even frame where the bumper attaches instead of running them all the way to the battery.

[@NitroZ18Fishing]

Not a bad idea with the fuse, I actually thought it was weird it didn't come with one!...may be a stupid question, but would grounding it like that be ok with the winch???...I've grounded other accessories like you mentioned but I've never seen anyone ground a winch like that...and the instructions specifically say to connect both positive and negative directly to battery...thanks man!

[@luny_mrg8868]

@@NitroZ18Fishing I believe those instructions are like that to ensure a complete circuit as alot of applications use an independent battery that are not grounded to the frame IE on trailers. Since your battery is already grounded to the frame, grounding the winch to the frame would complete the circuit. Just ensure it’s a clean connection and not covered with paint.

[@carlosq1177]

Love your videos brotha. Don't own my own tundra yet but one day I will and will come back to your videos for guidance. Love your truck. 💪🏽👌🏼👊🏽

[@NitroZ18Fishing]

Thanks man, I appreciate that!!...let me know if I can ever help with anything!

[@benmac1395]

Awesome video. I have the covert bumper on my SR5 TRD Off-road and I really liked it. I’m switching it out for an SSO slimline front bumper because I keep hitting the plastic on both sides of the covert bumper. You’ve sold me on the Zeak! Keep the videos coming. They’re great.

[@NitroZ18Fishing]

Thanks man, I appreciate it!!...definitely recommend this Zeak, I've used it a couple times now and it's a beast!

[@gerrybaker1422]

You keep hitting the plastic? What do you mean? Pulling into places you bump the front?

[@markgraybill4260]

Amazing - thanks for sharing! It looks like you had to remove the air shutter to fit the winch - how did you get by the error codes / check engine light?

[@NitroZ18Fishing]

Thanks man, I appreciate it!…no error codes at all, working flawlessly!

[@SeriouslySinigang]

As always, great video! You are sooo descriptive and informative when you give tutorials! Question - if I don't have the Hybrid Tundra, do I just connect the winch terminals to the regular battery in the engine bay?

[@NitroZ18Fishing]

Thanks man, I appreciate it!...yes sir, just direct to battery in engine bay!

[@SeriouslySinigang]

@@NitroZ18Fishing thanks boss man! Looking forward to your next video!

[@mohammadalavai8220]

Brilliant instruction, obviously your Tundra is still under manufacturing warranty. I wonder how your warranty is affected since you put this winch on your own? Was there any manufacturing recommendatons? specifications?

[@steviesjr8183]

badland apex rebranded. Great video

[@NitroZ18Fishing]

Thank you sir!

[@Texans_tundra]

Can you show how the electrical connections were made at the battery? I also noticed on your battery has a box on top, never seen that on battery before. Thanks for all your content!

[@NitroZ18Fishing]

Absolutely! The connections were made with just your standard ring terminals, nothing special. Obviously had to get the correct size to go with the large gauge wiring, but pretty straight forward! That box on top of my battery was from my Rough Country switch panel I was using at that time. I do have an install on the channel going over that as well. Hope that helps, thanks for watching!

[@johnmeeboer6044]

Maybe Toyota did it right by no tow hooks. This way the after market business gets business and it would be better than any auto brand can make.

[@kenmorgan316]

Nope, they are not that smart 😀

[@NitroZ18Fishing]

As disappointing as it was to not have em, I couldn't be happier with this setup I'm runnin now!

[@bigkevo4x4]

Haha lame I hate not having tow hooks in the front in the tundra smh 🤦🏻‍♂️

[@mitch3448]

Mine was 82 after taxes.... they could have put some damn recovery points

[@doctimw]

Where did you purchase the "Flatlink" ? Did it come from Zeak or Great America Shakles?

[@r32gtr10]

Great work as always man! Always look forward to your videos. I did hear something about the active aero no longer working after installing the CBI bumper. Is this true? Thank you sir

[@NitroZ18Fishing]

Thanks man, I appreciate it!...and that's correct, I believe they make a kit to work around it if I'm not mistaken...thankfully the Pro doesn't have it so I didn't have to worry about it...let me know if I can help at all!

[@vtmn215]

Instead of running the negative all the way to the battery, couldn't you have terminated the ground onto the chassis to eliminate a 2 large gauge wire run?

[@doctimw]

Where did you remount your license plate?

[@SHOOT_NDX]

That looks very,very similar to a BADLANDS 12k

[@NitroZ18Fishing]

Basically similar product, rebranded

[@101Saia]

Just out of curiosity how did you connect the wires to the batterie? My batterie has a quick connect on the negative terminal and the batterie slots seem to be completely full I thought about getting a splitter or getting some vampire connectors to attach to the existing wirers. I plan on running 1/0 to a buss bar I'm going to install in the engine bay.

[@mohammadalavai8220]

Can it be installed if the truck is equipped with a front spoiler?

[@nehemiaslabrador2288]

You happen to have dimensions on this winch?

[@MikeFalk-e6j]

I finished my install and was able to clock the winch (RUGCEL 13.5K) which aloud me to use the lower grill support bracket. Where did you purchase the battery cable extensions?????

[@mictuning]

would you like to review some free wheel lights

[@NitroZ18Fishing]

Send me an email and we can talk!...my channel email is nitroz18fishing at gmail...thanks!

[@3charliewright]

I can’t Find any ZEAK winch online ? How’s the customer support?

[@NitroZ18Fishing]

Not sure about support, I haven't had any problems yet! (Thankfully)...but these sell out almost instantly...if I see em in stock on Amazon I'll let ya know, but keep an eye out!...they're sold out a lot of the time!

[@3charliewright]

@@NitroZ18Fishing I’ll keep trying - the reviews on the ZEAK winch are outstanding. I have time as I don’t have my CBI front bumper yet. I plan to go to Idaho Falls in person to check it out. We have a second home in Sun Valley ID…. I just got my Colorado seat covers and 22” amber light bar. Unfortunately I missed out on your recommendation on the floor mats by a week as I ordered the Husky two weeks ago. I now have notifications turned on 👍

[@NitroZ18Fishing]

That's awesome, thanks for all the support!...this winch is definitely a steal, can't beat it at the price point...just as good as some twice the cost!...hopefully you'll get your hands on one, every time I've looked recently they're sold out again...let me know how ya make out!

[@simarsandhu461]

whats the mpg with 35s

[@boxingcorn]

Dude, it's time to open your own shop so I can bring by truck for you to work on!

[@NitroZ18Fishing]

Man I would love to!…I’ve actually had a few viewers ask if they can come to me, but they were a little too far away to make it work…I thoroughly enjoy working on these trucks, I’m not against helping any of my viewers out if the timing/location works!…if I can help, let me know!

[@doctimw]

Nevermind my question below....I found the flatline is a product made by Factor 55.

[@fafo-faroundandfindout1752]

How did you retain the TRD skid plate? Did you run a lift?

[@NitroZ18Fishing]

No lift as of right now, I'm still on the factory TRD Pro suspension… No problems fitting the skid plate at all, no modifications needed… Hope that helps!

[@r32gtr10]

What flatlink did you go with?

[@NitroZ18Fishing]

Factor 55 Flatlink E....definitely nicer than the original, it has a bigger opening allowing for more ways to link up! amzn.to/3Z96Fu2

[@r32gtr10]

@@NitroZ18Fishing Thank you very much!

[@NitroZ18Fishing]

No prob!

[@ab872009]

How has the winch been pulling lately? Smittybilt and an Engineer at Baja Designs told me to swap the stock wiring for 0g since we’re extending the run on a 12k. I’m wondering how necessary it is?

[@NitroZ18Fishing]

No issues at all, works great!…I’ve only used it a handful of times but it has worked flawlessly

[@iggysworldvideos]

Wow what a good walk through very much specific thanks man for this.

[@NitroZ18Fishing]

Thanks man, I appreciate that!...happy to help!

[@kbussche]

The front active spoiler needs to be removed with this bumper right?

[@NitroZ18Fishing]

I believe so, I know they make a kit to delete the air damn...the Pro doesn't come with that so I didn't have to worry about it but I know the front air damn is not compatible with the bumper...hope that helps!

[@danh.461]

I just purchased mine thanks for all the instructions did you end up using all 25' of 2 awg wire? looking forward to own adventure installing it, Thanks!!

[@NitroZ18Fishing]

Hey Dan!...so I ended up using about 15' of wiring to make sure it wasn't pulled super tight anywhere and had plenty of "wiggle room"...I should have mentioned that in the video, I'm sorry!...thanks for watching, if ya need anything let me know!

[@danh.461]

@@NitroZ18Fishing Thanks yeah 15', that's a huge savings on price too. I did look around about grounded to the frame and it's not recommended, will cause the winch to run too hot and could possibly damage other electronics.

[@NitroZ18Fishing]

Yea I dont think I've ever seen a winch grounded to anything but direct to battery...the peace of mind is worth it for me!...let me know how your install goes!

[@LilTaco777]

You’re lucky you got that color

[@NitroZ18Fishing]

Absolutely, I'm shocked they took it away from the 2023 Pro!

[@e954rr2]

Need nitro videos

[@NitroZ18Fishing]

Season is almost here!...gettin her ready now, can't wait to hit the water!

[@e954rr2]

@@NitroZ18Fishing awesome I have a 23 z19 love it

[@NitroZ18Fishing]

@@e954rr2 nice!...they're solid boats for sure!

[@joseperezpaz9986]

Now people that want Tow hooks can stop crying lol

[@NitroZ18Fishing]

Hahaha...I couldn't be happier with how this turned out!

[@dethtour]

It should have came factory and the winch should have been an option. Toyota dropped the ball on this one.