Wind Turbine Fail Freewheeling and Brake Switch | Missouri Wind and Solar

Missouri Wind And Solar
WEBSITE: windandsolar.com
EBAY: stores.ebay.com...
AMAZON: www.amazon.com...
FACEBOOK: / missouriwindandsolar
PODCAST: podcast.windan...
INSTAGRAM: / missouriwind
CONTACT US
Via email: [e-mail]
Via phone: [phone]
OUR LOCATION
Missouri Wind and Solar
332 Cobblestone Drive
Seymour, Mo. 65746
Come into the store and see us!

[@wabuminifarm3437]

You have way more cooling built into your turbines than any other company I have seen on E-bay ,, you know that over heat can kill a turbine ,, I have no brake switch on my MW&S turbines YET, I have seen over 100mph wind gusts in my location in winter ,, In my location I have been running 3 MW&S turbines off one affordable MW&S dump load controller and 600watts of dump load resistors I bought from MW&S ,, My setup seems to work good in my area and it lasts along time ,, still going perfect, I haven't messed with my MW&S setup for several years now

[@MissouriWindandSolar]

That's really great to hear Jason. Your one of my oldest customers and i want to say thank you for all the years of support you have given us. I know your wind turbines have been through some pretty powerful wind storms and still going. You have a very nice setup. Might as well tell you first, getting ready to do my next video on our new sealed pmg. Should be on air this weekend.

[@patrickfordyce2958]

I love it how you put out the real world truth about wind turbines and solar systems !! You are the only guy that knows the truth about every situation!! Thanks for showing the real truth about how to do this stuff and why you need to do this stuff the right way !!! You have awesome videos !!!!! Thank you for having this real time Chanel with the real facts !!!

[@jeremyboyce1537]

Hi Jeff , I think you are very Knowledgeable and Straightforward in what you do and without all the Usual KZbin Theatrics , I really Admire You Jeff , I am a Customer as well but just not as Cashy as some of the other Bigger Players but i do what I have to do through my Buyer , thanks for all you do Jeff , take care Sir .

[@Ortodox415]

You guys are the real deal and I always watch your videos I love it number one I believe in this area. Keep posting We love it

[@tdronet]

I am so lucky to live 60 miles from you. I am not employed by them at any time just a customer I bought many things from them and my items are still working as when I bought them. I will still buy from them they are solid Wyatt and Jeff are here for the long run. Service after the purchase is where they stand tall. I will always go back where service is great. You have my business for life. Not every company is perfect and never will be, but this family stands out from the people who do business from a basement. I love walking into a store and able to browse they are close by and have always been helpful in answering my questions. I can drive up and get my questions answer. Great advice comes from people who listens to people who have already been there and done that.

[@MissouriWindandSolar]

Thanks Thomas. Yes it is a family run business and will stay that way for many years to come. Wyatt and my daughter Crystal really love and care about the wind and solar business.

[@gsambolin]

Jeff GREAT VIDEO !!! I have been waiting for a video like this like you cannot imagine. Not because I was concerned about the PMG heating up but for another project I am working on where I am planning to use your PMG indoors. Like your electric motor mine is about 900 RPM's. I would have love to of know what the PMG was generating in the form of voltage... Not sure what you meant when you were quoting "OPEN VOLTS". What exactly were you referring to? Jeff is busy so if anyone has the answer I would like to know. EDIT: Ok at 3:05 into the video Jeff says that he is at 1000 RPM's and has 105 open volts. Does that mean that there is 105 volts at the rectifiers?

[@bunamasidibeh3446]

No load connect to the output supply voltage

[@towerjokey]

Thanks Jeff

[@MissouriWindandSolar]

Your welcome

[@lesthompson5907]

is their a reason why we can't switch to a emergency battery bank that is dedicated to Hating hot water tank. IT time to ues the hi. energy. fed to provide a second battery bank that is dedicated to feeding one water tank heating elements ? wuld that work just as well

[@GallatinCountyNews]

Thank you for covering two things I was going to add, your motors wasn’t aligned and you had no wind flowing through or around the motors. Excellent video!

[@MissouriWindandSolar]

Your welcome. Just disputing bad info put out there.

[@HitchHiker4Freedom]

I need to build an emergency rope launcher. My confederate turbine is 70 feet in the air 😂

[@MissouriWindandSolar]

Rope cannon is what you'll need, lol

[@HitchHiker4Freedom]

Would it need to be a soft cannon? 😂 On a serious note these people need to go learn electrical theory before they speak. Your video doesn't an excellent job of proving no load = no heat

[@MissouriWindandSolar]

It was just another attempt from them to mislead people about us selling brake switches stating that a brake switch will destroy your wind turbine. I wished they would just dry up and blow away.

[@ian57812]

Just out of interest how high does the open voltage reach in your wind tunnel.great test

[@MissouriWindandSolar]

Good question Ian, i don't remember to tell ya the truth.

[@ian57812]

yes if I had waited to the end of your video you both got into mph in the wind tunnel. Lesson always wait to the end before engaging brain and making a comment.

[@MissouriWindandSolar]

Sorry it was so long a video

[@ChristophersVanLife]

I was told by them their wind tunnel tops off at 125mph

[@josephjohn907]

Mr Jeff. Nice one!

[@MissouriWindandSolar]

Thanks Joseph

[@lasttrain5033]

i;am so glad you are putting the nay sayers in there place

[@MissouriWindandSolar]

Real tests are the only way to go.

[@valeriewaite1929]

Do you travel to other states? I'm seeking a wind/solar power system for a commercial Aquaponics farm. Maybe you have a contact in NE Texas? I appreciate any help or advice you can offer. Blessings~

[@orvillehorner4326]

Question 1 1000 Rpm is how much wind. Is that 10 miles hr or is that 100 miles hr. Question 2 if you're not home and a 60 miles hr wind comes up and it is under a load you have 10 batteries that are Taking a charge.???. Not a fair test??? Are wind's last all day 90 mile hr gusts. 115 . 120 in the shade. You don't have to worry about people leaning on your car. We cook eggs on the sidewalk before 9am. I am interested in one of those. There's so many to choose between. How much. How many rpms does this take to work say a minimum amount rpms???.. 🤔 we have lots of wind out here. You can proof test it out here . Make a commercial. Idea 💡. I'm looking for one right now. Seen this show. To go with solar panels. Thank you for your time

[@tompage6662]

tom page if you have no current flowing in windings there is no heating .

[@pdan62]

I trust you, to heck with nay sayers, you may serve diyers but I've visited your shop, very professional.

[@MissouriWindandSolar]

Thanks Daniel.

[@ChristophersVanLife]

You can't break quality and MWANDS is quality

[@MissouriWindandSolar]

Thank you!

[@t12goby2]

Maybe were the climate was a part in play

[@555Superd]

I would have been impressed if you would have placed a black piece of tape on the case of the PMA. Emissivity on a shiny surface not to good.

[@MrSeebobski]

You lost audio a quarter way through. 3/4 of it no sound

[@pulesjet]

I really can't see the thing getting up to 1000 RPM swinging Blades Free Wheel.

[@brianoneill350]

A nonsense test. Motor not in case. Bearings not under load from turbine blades. Common sense would tell you that with very high speed it will thrash bearings and heat inside case.

[@auctionadonline9292]

Obvious the guy doesn't understand electrical. No load equals no work being done. No work no heat. As heat is a by product of load. Open circuit means there is no path for the electricity to go. He had to have a short someplace. Also free wheeling a wind generator could destroy the blades. If you dont want it spinning turn it off with a brake switch. It will still turn slow but not fast enough to be an issue. Good luck getting your point across Jeff.

[@MissouriWindandSolar]

Thanks buddy.

[@anthonystephan5884]

AuctionAdOnline It’s a free wheel test with no load. What Jeff is demonstrating is right on....

[@alainpieri4650]

Hi Jeff, love your videos, I send an email to Ben, could you look at it and get back to me?

[@MissouriWindandSolar]

I will take a look at it Alain