Windshield Wiper Hitting or Striking Window Pillar! | Noisy Wiper

[@startrekkindelta]

My car does thissssss. Thank you for the easy fix! ❤️

[@coolman138]

Dude just wanna show off his used Audi lol! No need fancy tools. Just used a 9 1/8 nut wrench to loosen it up and wiggle the arm a bit until it’s at precise position, lock it back down tight and voila!

[@grand_vacation]

Dude just wanted to write a useless comment

[@cuteus51]

​@@grand_vacationnot useless if it keeps people from buying unneeded stuff! And, I also listened to the guy who wrote to lift the wiper as if changing the blade and it comes off easy. No need for another tool. A useless comment would be one that is only written to label another, useless.

[@SanTino876]

My does the opposite of this lol. Its not covering the whole windshield so I just wanted to know how to adjust it. Thanks a lot! 🙏🏽

[@EddieRiff]

Hi, how about fault finding this: when I lift my Bonnet/hood the elbow of the wiper arm catches on the lip of the bonnet. And yes I have done the Hokey Cokey with it and it still happens. It's not the spring either.

[@robertd10481]

Great video!

[@righteous6996]

Great helpful video.

[@jeremykuehn]

If you pull the wiper off the windshield as if to change the wiper blade you don’t need a tool to remove the wiper arm with a tool.

[@cuteus51]

Thank you! I just did that yesterday and it worked beautifully. My guess is that your tip will work on the majority of wipers and only a few are hard to remove

[@jeremykuehn]

@@cuteus51 I’ve been doing my own mechanic work my entire adult life and I’ve yet to find a situation where that did not work.

[@alijashahi7731]

can you please explain this in more detail? i tried to follow your comment but my windscreens are still smacking against the pillar

[@juanmontanez1874]

How did you turn the notch?

[@ygbodybuilder3023]

I just change the wipers on the Honda pilot 2013 and now it's hitting the window trim why is this happening

[@rawo5756]

nice one feller :)

[@barrythomas6429]

Have the same issue with my 06XT Forester.. Although it spends most of its life under cover.

[@Carlostype]

I've just replaced the linkage on my car and now the sweep on the driver wiper is a bit too long, my wiper hits the a piller and the lower seal. The linkage is straight so I think the aftermarket part is a bit long and I don't think the sweep can be adjusted, can it?

[@hakimzenian]

Thanks dude

[@publicmail2]

Of course it was installers fault, blade sat too high when parked and slapped side...But good fix.

[@icristi-naDIY]

Hallo lieber Freund, ich mag deine Videos sehr. Ich würde mich freuen, wenn du dir einige meiner Videos ansehen könntest, vielen Dank! Ich warte auf eine Meinung und ein Like!😀