Hi Winston, just finished pulling getting the old one out. Definitely need to turn the steering rack to the left so the whole unit can be taken out. Installed the new one this morning which was very easy. Again thanks so much for your video/instructions! Must have watched it 5 times already!
@winstonbuzon7 жыл бұрын
Iole Aguero you're very welcome, I am glad this video helped :)
@bratman997 жыл бұрын
Hey man thanks so much for posting this it saved me a ton of heartache. That steering wheel all the way to the left was genius. Thanks
@ioleaguero12987 жыл бұрын
thanks for your great documentation! Going to pull mine out tomorrow and install the new one. Video gives me confidence.
@winstonbuzon7 жыл бұрын
Iole Aguero Thank you and good luck :)
@JodBronson3 жыл бұрын
THANK YOU for some of the tips !!!
@LuisSanchez-eo7od9 жыл бұрын
thanks alot Winston i need to do this work to my 92!;)
@silveriocastillo97057 жыл бұрын
great video thank you I will do my job tomorrow my van needs a new rack and pinion Job.
@jaylingard29898 жыл бұрын
Subscribing!! You just saved me so much money! Lmao! $350+ parts and labor. Thanks a lot!
@winstonbuzon8 жыл бұрын
Awesome! Thank you :D
@jaylingard29898 жыл бұрын
+Winston Buzon (DubEezy) Always on the look out for good videos like this. DYIs are way better than going to a shop! I'll learn before I spend money lol.
@winstonbuzon8 жыл бұрын
That's awesome! I agree with that!
@danielvega40763 жыл бұрын
My h22 cb7 had a powersteering delete and im gonna attempt to give it powersteering again but all it has is a leaky rack and pinion what are the 4 to 5 lines that connect to the rack and pinion? I already got a reservoir, pump, bracket, pulley, high pressure line, some random fat return lines what else do i need?
@mazdapro5diy1539 жыл бұрын
awesome job man! I live in Chula vista think I saw you at harbor freight once.
@winstonbuzon9 жыл бұрын
Thanks! Yeah, I go to that location whenever I need tools on the cheap
@mazdapro5diy1539 жыл бұрын
We should have a garage cb7 weekend lol
@winstonbuzon9 жыл бұрын
I might hold a meet somewhere in SD but deciding where is the main issue...
@mazdapro5diy1539 жыл бұрын
True it be cool to have a place where cb7 peeps can hang chill and work on their cars or start a cb7 SD club that'd be sweet
@tinocb75 жыл бұрын
I changed to my accord the pressure line the pump and the rack an pinion but it is still buzzing and I take the air out and any advice remains the same
@stephenrasch47345 жыл бұрын
Yeah that castle nut on the tie rod end should be torqued down otherwise you're going to Wobble the whole out where it's secured. Mines and 1988 CRX
@wipphalo15732 жыл бұрын
Hi Winston which lines on the rack did you have to place the o rings
@winstonbuzon2 жыл бұрын
Sorry, but I don't remember
@bigboyg2099 жыл бұрын
My steering wheel did not align right after installation of rack and pinion, is there anything I can do without taking the hole thing out and redoing it? It's about 1/4th off
@winstonbuzon9 жыл бұрын
+bigboyg209 kzbin.info/www/bejne/bZLaao1_hJV9fK8
@mazdapro5diy1539 жыл бұрын
what brand is the rack n pinion? or where did you buy it from?
@winstonbuzon9 жыл бұрын
From a local auto parts store. I can't name them specifically because they don't sponsor me...yet, I hope
@mazdapro5diy1539 жыл бұрын
Lol Hey maybe one day..
@abtransport134 жыл бұрын
Would removing the sway bar and sway bar links allow me to tuck the lines back to male rack install easier?
@winstonbuzon4 жыл бұрын
Possibly, but I wouldn't know because I haven't tried
@abtransport134 жыл бұрын
@@winstonbuzon Is there a torque spec for the lines? Installed by hand then began to tighten. Does it need to bottom out with connector or how tight do I go?
@winstonbuzon4 жыл бұрын
@@abtransport13 I don't know exactly. I honestly wouldn't want to give you info that's not correct. I would refer to the Haynes manual
@abtransport134 жыл бұрын
Winston Buzon Thank you, I got the rack in and pretty much all that’s left is installing lines and outer tie rods. How tight do I have to tighten the lines?
@winstonbuzon4 жыл бұрын
@@abtransport13 do you have a torque wrench? It would help a lot
@daniij79078 жыл бұрын
I have 1990 Accord and steering locks to the right automatically. once I start the car the steering turns right after a few minutes. Any suggestion?
@winstonbuzon8 жыл бұрын
Did you turn your steering wheel and rack all the way?
@daniij79078 жыл бұрын
+Winston Buzon (DubEezy) I haven't pulled apart the rack and pinion as yet. I noticed a leak( power steering fluid) under the car for a while now but I'm wondering if the leak could be causing my steering to turn on its own.
@winstonbuzon8 жыл бұрын
+Danii J Its a definite possibility, especially since the fluid is what helps keep the power steering control your steering in place
@daniij79078 жыл бұрын
+Winston Buzon (DubEezy) I'll definitely try to get it sorted out. Thanks for replying and I'll subscribe.
@winstonbuzon8 жыл бұрын
+Danii J Thank you! I definitely appreciate it :)
@AngelHernandez-rq1nw3 жыл бұрын
Did you drop the subframe?
@winstonbuzon3 жыл бұрын
No, just what you see
@AngelHernandez-rq1nw3 жыл бұрын
There we definitely parts that were cut out that’s why I was asking but thanks! Going to be attempting this on my 92.
@abtransport134 жыл бұрын
Does it need to be Honda power steering fluid or can it be any brand?
@winstonbuzon4 жыл бұрын
The oil was temporary. Ended up draining and filling with Honda Brand Fluid
@abtransport134 жыл бұрын
Winston Buzon thank you, do you know how many bottles I will need?
@winstonbuzon4 жыл бұрын
@@abtransport13 Do you have old fluid in the tranny? Keep in mind that if you're changing the fliud is that you only drain about 2 of the 6 quarts in the transmission (67% of the fluid is still old). To get more of the old fluid out, drain & refill, then drive around the block, drain & fill again (this leaves about 44% of the old fluid), repeat again (about 28% of the old fluid.) A shop can tap into the cooler lines to make a more complete change all at once
@abtransport134 жыл бұрын
Winston Buzon Ohh, I see, thank you. Yes, currently still have old fluid in the tranny
@winstonbuzon4 жыл бұрын
@@abtransport13 you're welcome 😁👍
@andressalinas72166 жыл бұрын
is this the same for a 1992 acura integra?
@951phantom4 жыл бұрын
Yeah same thing... 90-93 Accord and Integra are basically the same...
@pineapplegod44224 жыл бұрын
Directions confusing, broke my face and am now omish