DIY How to Replace Steering Rack & Pinion on 1990 - 1991 Honda Accord CB7 - Winston Buzon

** BEST VIEWED IN HD! **
This is a two-part series on how I replaced & installed my new sterring rack & pinion. I hope this video is a good enough guiding tool for you folks if you should decide to embark on this journey of how-to do-it-yourself. Enjoy! :)

[@joserebollar8718]

yea buddy finally a good video on how to remove this damn part. I need to change mine keep up the good work winston ! stay safe and hope the family is doing well

[@winstonbuzon]

Thank you and yes they're doing great! :)

[@juicyjamepr]

Thanks for this video Winston. I’m currently needing to replace the steering rack and pinion on my 91 CB7 and I had no clue where or how to start.

[@bri9479]

Hey Winston , I’m currently needing to replace this on my car and I clicked on the first video I seen on google and it was you! I’ve been watching you for months now since I’ve bought this car and haven’t watched your videos in a while so I’m glad this was suggested to me

[@josemeza0418]

Watched this a long time ago. Now revisiting to do it on my own cb... thanks for the help winston!

[@winstonbuzon]

Jose Meza You're welcome, my friend :)

[@Sk8orDieWorldWide]

Winston is a life (and budget) saver! I jist got done performing this on my CB9. This video along with others out there. Thank you!!!

[@winstonbuzon]

Wow, I appreciate you for allowing my channel to be your source 😁👍

[@Sk8orDieWorldWide]

@@winstonbuzon Your the 1st person i think of when i need help for my CB. 4 years ago i didn't know how to change my own oil. Your channel, along with others, have been conducive to my accumulation of mechanical knowledge. I have saved a $h!t ton of money learning fron yaal. infinite blessings!!!

[@kevinmanning4880]

Always appreciate your videos! Thanks again!

[@crispin2686]

great work, thanks man for this video . I need to change mine and this will help me.

[@FranciscoSanchez-et9vo]

Winston you’re the man!

[@StrugglaREP]

Finally a video ! :D Awesome man !

[@winstonbuzon]

+StrugglaRep Lol, thanks! I know, right? :)

[@henloy]

gd video man gna have to replace my axle on my cb7 soon. Definitely gonna buy me a impact gun.

[@MrOnlinmrine]

You the best Winston!

[@billybob5171]

Huge help much thanks

[@joancarbajal976]

Whats that little pipe coming from the fender near the power steering fluid bottle in the engine bay do ? Of the driver side is it just a draining pipe or something ?

[@johnnyvasquez2481]

do I have to replace the steering rack as well when replacing only rack and pinion?

[@Xtremechaser69]

How and where do I remove the exhaust pipe in the way on a 91 accord

[@BryanBeast13]

Thank you.

[@winstonbuzon]

+BryanBeast13 You're welcome :)

[@lejonbishop5823]

How did you get the steering rack out? You skipped rhat part

[@petermfinanga5708]

nice job

[@winstonbuzon]

Peter Mfinanga Thank you :)

[@Xtremechaser69]

How did you remove the exhaust pipe 17:39

[@minombremiapellido8248]

Thanks for the video. it is very helpful. I followed your instructions, but I'm stuck. I can not remove the Exhaust pipe nuts, are very stuck. I put them w40 but it still stuck. Should I call a mechanic to finish the job? If I can remove the pipe, I know I can finish the job myself. What do you recommend me to do? (sorry for my english, is not very good).

[@winstonbuzon]

+minombre miapellido If you have access to a propane torch, heat the bolts just a bit (don't melt them off). This allows the metal to become a bit softer and malleable.

[@minombremiapellido8248]

+Winston Buzon (DubEezy) My cousin has one of those, I'll call him to help me with that. Thanks for your prompt response. good job. keep going!

[@MidnightClubsSR]

Kool bro

[@Soulja13]

Hi winston. I watch your videos and I need your opinion. Which steering hack and pinion do you recommend, Ac Delco our A1 Cardone - accord Cb7?

[@winstonbuzon]

Du Soulja I went to my nearest auto parts store. Just for the fact that it will have a warranty in case something is wrong with it and can get a replacement for free

[@Soulja13]

Yes. I need to change my steering rack and pinion and I hear good talk about these two brands. I am from Brazil and have cb7 trasmission manual F22 JP. Congratulations on the videos Winston Buzon

[@abtransport13]

Wheel is very tough to turn all the way to left when the car is parked and while driving the wheel will not stay centered and car seems okay when turning right but difficult when turning left and will not turn all the way. Do you think it’s a steering rack?

[@winstonbuzon]

It's possible, but I can't confirm to be sure

[@abtransport13]

Thank you, going to get someone to take a look at it to confirm

[@danielbelmontes4085]

Do you turn the wheel all the way left before removing the rack and pinion?

[@winstonbuzon]

Yes

[@pecosa6234]

My car is leaking at the presure line that goes to the rack and pinion. Does it need an oil ring in there?

[@winstonbuzon]

No, it just needs to be properly seated before you wrench it in. In other words, it must screw in well before you tighten it. Otherwise, you could strip the threads and cause a leak

[@treydaypnw]

S*** Winston it looks like I'm watching a movie with this video you made, other than that Great video!

[@theoverstraete263]

where did you get your steering rack from?

[@winstonbuzon]

Local auto parts store

[@anthonysolares3944]

Hey man! Where’d you get the new rack?

[@winstonbuzon]

Refurb from Autozone

[@bradleyrivelli8499]

Why is it you do not show the only 15 minutes I need?

[@crooksonestopshop]

hey great video what size is those bolts @ 16:47

[@winstonbuzon]

I think they're 14mms. I would have to double check when I work on my next project

[@crooksonestopshop]

@@winstonbuzon i figure what the issue was the bolt thats inside the subframe is gone I can push the bolt all the way up so I'm thinking of adding a rivnut hopefully that will work.

[@smileyrod11]

IS THIS STEERING RACK THE SAME AS THE ONE ON A 1991 HONDA ACCORD LX LET ME KNOW THANKS BRO

[@winstonbuzon]

All CB7 share the same steering rack

[@smileyrod11]

THANKS WINSTON

[@winstonbuzon]

You're welcome. :)

[@MichaelAllenPortland]

What was the problem with the old rack?

[@winstonbuzon]

Leaked a lot

[@amasoak47]

+Winston Buzon (DubEezy) did you get the steering wheel shake and front vibration at freeway speed?

[@winstonbuzon]

No, but I just didn't like how my driveway looked from all the leaking, no matter what else I've tried

[@951phantom]

How long did this take Bro? I'm going to do it next week 🤦‍♂️

[@winstonbuzon]

About 2 hours

[@951phantom]

@@winstonbuzon oh OK that's not too bad... Thanks for the reply Bro!

[@winstonbuzon]

@@951phantom good luck with your project 😁👍

[@morganatkinson2318]

This job would be a lot easier if it could actually fall on your face when you unbolt it!

[@80s90sfan]

U still didn't show or explain how u got this out...I think that's what we want to know

[@unebonnevie]

Thanks for the vid. But I think the very FIRST step to do is to drain all the power steering fluid. Then jack up the car and start the real work.

[@winstonbuzon]

I will definitely take this into consideration because I have the rack and pinion to do on my Honda Odyssey

[@AJFresh69]

13.5K views and 72 likes? come on people