Winterizing a 25 Hp E-tec Tiller

  Рет қаралды 25,484

Regina Marine

Regina Marine

Күн бұрын

Пікірлер: 41
@quaileggsvermont
@quaileggsvermont Жыл бұрын
I have to watch your video each year to do this!
@dianetrottier3280
@dianetrottier3280 2 жыл бұрын
Very good tutorrial. Super well done.
@ayhankucukozer1478
@ayhankucukozer1478 Жыл бұрын
I have a 30 hp evinrude e teceh marine engine, I start the engine, the engine runs at idle, but the engine lights do not turn off. When I put it into gear, the engine stops.
@quaileggsvermont
@quaileggsvermont 4 ай бұрын
Ok what is the tape for on the water intet????
@klaamaxi988
@klaamaxi988 Жыл бұрын
When transported on his side you need to prime the oil pump, that is the same procedure right? Can you start it up and run it right after this procedure?
@anthonysupplee858
@anthonysupplee858 Жыл бұрын
I use a large plastic trash can to run my motors over for water. Should I use the muffs when winterizing or is my “tank” ok?
@martinnovakosky8041
@martinnovakosky8041 11 ай бұрын
Excellent video ! what about after winterize procedure ? when running the engine again. any tips? or just use it as normal.
@tiz9126
@tiz9126 5 жыл бұрын
What repairs did you do to the motor if the small holes on each side of the gearcase were not applied.
@RaztechPowersports
@RaztechPowersports Жыл бұрын
Have you ever had an issues with the shift linkage falling off?
@1yanny1
@1yanny1 Жыл бұрын
Nope
@brianjohnston6907
@brianjohnston6907 Жыл бұрын
I had a bushing go bad on mine. it cracked. Bushing was held on shaft with small o-ring at the end.
@ism6507
@ism6507 4 жыл бұрын
thanks for video, worked like a charm.
@spiropana4549
@spiropana4549 2 жыл бұрын
When spring time comes around what do you do to start it back up? After this process
@1yanny1
@1yanny1 2 жыл бұрын
Just pull the rope or hit the start button. The regular start up routine does not change at all.
@rickybrown8201
@rickybrown8201 3 жыл бұрын
Can you winterize at the lake/river with the motor in water without tapping them holes thanks?
@1yanny1
@1yanny1 3 жыл бұрын
Yes. The holes are only taped when using a flushing attachment. The holes cannot be blocked when running the engine in the lake.
@bobtomlinson8247
@bobtomlinson8247 Жыл бұрын
I have a 50 hp....do I need to do the tape step?
@1yanny1
@1yanny1 Жыл бұрын
No. The venting holes are unique to the 15 H.O, 25 Hp, and 30 hp engines.
@1minutetomidnight432
@1minutetomidnight432 3 жыл бұрын
I think we accidentally fogged the 25 hp e-tec on the River. Do you have any videos on how to start the motor and run it after we fogged the motor?
@1yanny1
@1yanny1 3 жыл бұрын
Just fire it up and start driving. It will smoke a bit.
@1minutetomidnight432
@1minutetomidnight432 3 жыл бұрын
@@1yanny1 we did that and it did smoke, but to come and find out that the water pump needs to be replaced.the sensor would keep shutting it down. Thank you for your response
@alexandriaauctionservice7404
@alexandriaauctionservice7404 Жыл бұрын
Thank you..Great info
@craiggraham2383
@craiggraham2383 4 жыл бұрын
Do you also have to plug those holes if you are using the hose directly screwed in, not the muffs?
@1yanny1
@1yanny1 4 жыл бұрын
WE DO NOT RECOMMEND SCREWING THE HOSE IN TO THE BACK OF THE ENGINE. YOU ARE FORCING THE WATER THROUGH THE SYSTEM BACKWARDS AND THE WATER PUMP IS TRYING TO PUSH IT BACK AGAINST THE FLOW. USE A FLUSHING ATTACHMENT
@m4bassin398
@m4bassin398 4 жыл бұрын
I don’t get what the tape is doing
@1yanny1
@1yanny1 4 жыл бұрын
It is plugging off some holes. If you don't do this, the water pump sucks air, loses prime, runs dry, and melts. You don't necessarily need to know what it is doing but YOU MUST DO IT!!!
@catoublabla9795
@catoublabla9795 3 жыл бұрын
Hi. Do you have to plug these two holes even when you flush the engine or just when you winterize it? And can you use the hose directly screwed in at the back of the engine when you want to flush without the engine running? Thanks for all.
@1yanny1
@1yanny1 3 жыл бұрын
I live on the prairies in Canada, no salt water around here so I may not be the best one to answer your question. My understanding is the port on the back of the engine is for flushing out the salt water. The engine doesn't need to be running. I have had a number of customers hook a hose up to the flush port on the back of the engine and run the engine. It did result in damage to the water pump. Would this have happened if the holes were plugged down low on the gear case? I'm not sure. I do not think forcing water backwards through the system down to the water pump (which is trying to force it back up to the power head) is a very good idea. Best to do it like the video I posted.
@catoublabla9795
@catoublabla9795 3 жыл бұрын
@@1yanny1 OK I'll do as in this video, I think it's better for the engine. I've got another question, may I have pictures of the starter connection because I have an electric starter but it is not connected or an electric plan? Thanks.
@1yanny1
@1yanny1 3 жыл бұрын
@@catoublabla9795 sorry, the motor is in storage. We still have snow on the ground.
@grantdochnahl1419
@grantdochnahl1419 4 жыл бұрын
Why didn’t you use bigger flushett ?
@1yanny1
@1yanny1 4 жыл бұрын
a bigger flushett won't help. Look at where the holes are and you will understand.
@EndyRosarioEstevez-y2i
@EndyRosarioEstevez-y2i Жыл бұрын
Tengo ese mismo motor nuevo y al prenderlo prende de una vez pero solo aselera como lo ases ese en el video no aserera mas que devo aseele
@bobtomlinson8247
@bobtomlinson8247 Жыл бұрын
Thanks
@1yanny1
@1yanny1 5 жыл бұрын
The water pump will need to be inspected and likely replaced.
@alibrown2804
@alibrown2804 2 жыл бұрын
How the fuck does the top come off
@1yanny1
@1yanny1 2 жыл бұрын
Hi Ali Brown, there is a latch on the back of the engine's cowling. Pull it towards you then rotate it down. Lift firmly on the back of the cowl to break the seal. Once it moves you have to lift the cowl up and forward at the same time. I hope this helps.
@golfish8589
@golfish8589 Жыл бұрын
Why will the motor over heat in the spring if the 4 holes are not covered?
@r.seaboats6666
@r.seaboats6666 Жыл бұрын
You don't need to winterize a motor if you start it up once 3 weeks for a min or two
@1yanny1
@1yanny1 Жыл бұрын
You must live in a much warmer climate. We have freezing temperatures up to 6 months a year. We've been ice fishing since November and there is currently 36" of ice on our lakes. We won't be able to put a boat in the water until May LOL.
@r.seaboats6666
@r.seaboats6666 Жыл бұрын
@@1yanny1 true and if you have a garage it's different as well I usually pull my motor off and keep it inside
How to Winterize an Etec Tiller
3:11
Team Jesus Outdoors
Рет қаралды 8 М.
2010 25 hp Evinrude Etec Outboard
5:19
Make It Better
Рет қаралды 30 М.
OCCUPIED #shortssprintbrasil
0:37
Natan por Aí
Рет қаралды 131 МЛН
«Жат бауыр» телехикаясы І 26-бөлім
52:18
Qazaqstan TV / Қазақстан Ұлттық Арнасы
Рет қаралды 434 М.
GIANT Gummy Worm #shorts
0:42
Mr DegrEE
Рет қаралды 152 МЛН
How to Winterize Your Evinrude E-TEC!
3:10
Musky Mastery
Рет қаралды 85 М.
Evinrude E-Tec 25hp impeller replacement
12:08
Fish Man ROLY
Рет қаралды 22 М.
Evinrude E-TEC 25 H.P.  Engine Tests - By BoatTest.com
3:33
BoatTEST.com
Рет қаралды 281 М.
Evinrude E-tec 50hp outboard motor. Fuel Pump Repair.
11:44
Om Fishing
Рет қаралды 37 М.
Are Yamaha Outboards Tough?
11:14
ThatBoatGuy
Рет қаралды 2,7 МЛН
Evinrude E-TEC 25 H.P. Engine Features Reviews - By BoatTest.com
3:24
E TEC telltale trouble
1:56
Dangar Marine
Рет қаралды 259 М.
Johnson / Evinrude primer solenoid
12:58
Dangar Marine
Рет қаралды 624 М.
OCCUPIED #shortssprintbrasil
0:37
Natan por Aí
Рет қаралды 131 МЛН