Dang dude you got a patent on that guiding mechanism?
@chrisvaughn4399 Жыл бұрын
Looking good. Consider a cheap hand crank winch. Attach the winch cable to vice grips to clamp the stripped wire tip. Curl the tip for better grip. Run the wire through a cheap funnel (the same type for adding vehicle fluids) securely attached to the board. No kinks = no hassles. Larger channel in the board with easily removable sheet tin used as a filler to accommodate smaller wire. Wind the bare wire on to different diameter spools with a missing tabletop edge. Slide it all in to a 5 gallon bucket. Huge space saver! Turbo mode engaged.
@Oneminutetofixit Жыл бұрын
I like the constructive advice. There is always was to improve and advance a system. I will employ them if I can.
@kleonfrmdeadpresidents3333 Жыл бұрын
How much more do you get if its stripped??
@matthewdarwin1148 Жыл бұрын
This is awesome! Been stripping wire like a caveman for a while so imma have to steal this!😂😂😂
@Oneminutetofixit Жыл бұрын
It's helped me so much. Keeps the wire contained while pulling it. It's easy once dialed in. Just turn in a 5 gallon bucket of wire for $295. Just do it when I find extra wire 🤷♂️😆
@matthewdarwin1148 Жыл бұрын
@@Oneminutetofixit thats great! Hope it works just as well for me!
@DirectCurrent4u29 күн бұрын
I have been doing this for over 40 years! But I use a machine. It will do 500 MCM down to 24 AWG. Much faster then by hand!💯👍
@justgzo Жыл бұрын
Pretty smart set up, trying to do something similar
@Oneminutetofixit Жыл бұрын
I works great!
@erics25062 жыл бұрын
Does it not dig into the copper wire a snag seems you are using the flat part of the razor instead of just the pointy tip? I have tied and both processes snag a lot
@Oneminutetofixit2 жыл бұрын
The angle of the blade has to be perfect that's why I hold it by hand while pulling it through. I know everything what you talk about. When the wire is very fine that is more of a problem. The thicker the wire the easier it is.
@assassinlexx19938 ай бұрын
If you use a pipe cutter wheel and a spring in that v groove. It self adjusts
@TX_b Жыл бұрын
Nice. I’d like to see it in action
@jasonbacues29992 жыл бұрын
Can we see the process in action?
@Jordan520307 ай бұрын
I have so much copper. Would I lose a lot of money not stripping it all?
@Oneminutetofixit7 ай бұрын
Cut your profit by half
@kilianschneider653217 күн бұрын
But where do you get so many from cooper?
@Oneminutetofixit17 күн бұрын
@@kilianschneider6532 I pick it from trash and do some rewiring of panels.
@kilianschneider653217 күн бұрын
@@Oneminutetofixit ok thx
@b2b_ww_champs7 ай бұрын
Thieving Lineman or Narrow Back?
@Oneminutetofixit7 ай бұрын
🤣neither. Backhoe copper mining 😂
@b2b_ww_champs7 ай бұрын
@@Oneminutetofixit haha
@williambowfishing11 ай бұрын
Dude thats a good idea!!
@Oneminutetofixit11 ай бұрын
It's made me hundreds and cost me pennies👍
@harryl9yearsago7882 жыл бұрын
How do u dispose of all you plastic sheath? Thanks 👍✌
@Oneminutetofixit2 жыл бұрын
I put it in the residential recycling pick up .
@xyzabc4178 Жыл бұрын
@@Oneminutetofixit it’s not actually recyclable. Please put in the normal rubbish/garbage
@Oneminutetofixit Жыл бұрын
@@xyzabc4178 I thought some was. I guess the recycling program must struggle with people putting non recyclable good in all the time, hell I can't get my wife to stop putting mylar potato chip bags In recycling 🙄🤣
@newboysgeneration6198 Жыл бұрын
@@Oneminutetofixit 😆😆
@williamstamper442 Жыл бұрын
Recycling is a huge scam. Cities are paying contractors huge money to collect "recyclables" and in the end it all goes into the regular trash anyway. This is a rabbit hole if anyone cares to go down it.
@williamstamper442 Жыл бұрын
Way to not show your genius blade mechanism. I don't see anybody stealing your patent. Why didn't you just show us the rig in action?
@Oneminutetofixit Жыл бұрын
When I started making videos, I didn't have a tripod.
@michaelclouse314711 ай бұрын
I have a wire striper 3 phase can strpe 2 spools at 2 1/2 tons apiece in 2 days 1/1/2 it can stripe 4 inche wire!
@Oneminutetofixit11 ай бұрын
Cost money to run those, makes big money when it runs.
@nicejunk666 Жыл бұрын
Great tip
@Oneminutetofixit Жыл бұрын
Simple, easy, and makes money.
@banksgold5 ай бұрын
I believe melt the copper and two bars Heaven certified put in the vault. Get the value of copper up for one ton $2 million Is a longshot it’s worth it
@dutchvanderlein64985 ай бұрын
Nice man!
@Oneminutetofixit5 ай бұрын
Works great on any wire.
@halguy5745 Жыл бұрын
if it works it works
@Oneminutetofixit Жыл бұрын
Last 5 gallon bucket of copper paid me 296. I just slowly collect it over a year, like a piggy bank.😆👍
@ThatsRightRecycling5 ай бұрын
#mocoppermomoney
@yoshi2tvmes Жыл бұрын
Nice demonstration 👏👏👏🤦🏽♂️
@Oneminutetofixit Жыл бұрын
Yeah I know it hard to imagine how to hold the blade and pull the wire 🤦♂️
@yoshi2tvmes Жыл бұрын
@@Oneminutetofixit Yea it's real hard to imagine 🤦🏽♂️ It's not about that 🫏 It's about how efficiently it works 🤡
@joestalin237510 ай бұрын
@@Oneminutetofixit Can we bolt the knife or just the blade instead of holding it ? Bravo for the initiative pal!
@Oneminutetofixit10 ай бұрын
@joestalin2375 I found that with different wires and coating thickness, it's easier to hold, so the angle can be changed to shave it properly 👍👍
@joestalin237510 ай бұрын
@@Oneminutetofixit I understand . maybe a rig for each different size wire,and pull them with a motor ?
@Real_ATF2 жыл бұрын
Why not recycle the plastic? I mean I’m sure it would be like 10 cents for like a trillion pounds. The way things are going in the country right now money is money.
@Oneminutetofixit2 жыл бұрын
It gets recycled when it hits the trash processing center. The companies have to go through everything before it gets to the fill.
@wszechmocnieuzdolniony11 ай бұрын
👏👏👏👍👍👍
@ChowMien1234 ай бұрын
Copper prices here $5.50 per lb
@Oneminutetofixit4 ай бұрын
WOW!!! At the time of the video, it was 2.85🤦♂️
@kenjihimura88872 ай бұрын
May manananso din pa lang porener..
@nabajojak8734 Жыл бұрын
💡! 😃🎉
@СынКрестьянский-х1щ5 ай бұрын
Медяху везде любят 😊
@jasonbacues2999 Жыл бұрын
Thomas Edison would be proud
@brosephinoemporium9613 Жыл бұрын
You have of video of it in use?
@hugoniggletz.55492 жыл бұрын
Afro engineering right here
@Oneminutetofixit2 жыл бұрын
With a last name Niggeltz, and the Afro reference idk what to think 🤣. I'll tell you I've stripped hundreds of dollars of copper this way. It works great 👍
@StonemanRocks Жыл бұрын
@@Oneminutetofixit hundreds of dollars? Ok thats gotta be a record! Whats that about 20 ft because i mean ya im bored so whynot flame the guy with some plywood scraps a cpl screws and a utility knife blade! Lol!
@Oneminutetofixit Жыл бұрын
@@StonemanRocks that's like saying a pencil never figured out the most complicated expensive problems known to man. Doesn't have to be a thousand to make a thousand 🤡
@Oneminutetofixit Жыл бұрын
@@StonemanRocksand BTW you must be really unable if you can't tell that is a 2x4 not plywood 🤪
@StonemanRocks Жыл бұрын
@@Oneminutetofixit i stand corrected! I mixed you up with that other guy who is equally as talented with his wood much like yourself! Keep it up! Lol if it works dont fix it .
@manueldejesuscastillomanja400614 күн бұрын
Nunca dijo como poner la Navajo o como ponerla dejen de hacer videos si no los van a hacer bien
@TECHNICUSChannel Жыл бұрын
Interesting
@mickh41244 ай бұрын
I would love to see it in action
@edubolton2908 Жыл бұрын
😂😂😂
@zuzuzaza62112 жыл бұрын
😂
@guymann4016 Жыл бұрын
Yeah boy! Meth doesn’t pay for itself, get to it!
@Oneminutetofixit Жыл бұрын
Is that what you spend your money on? To bad that's all you think about, find some help.
@bwma Жыл бұрын
Every channel has to have a local looser...
@jamesosborne41327 ай бұрын
Pathetic - waste of Filming if you can’t be bothered to actually show it in use.
@Oneminutetofixit7 ай бұрын
You must be one of those who constantly needs hand holding and diaper changes 🤣🤣🤣
@StonemanRocks Жыл бұрын
Lmao ! What a hack!
@Oneminutetofixit Жыл бұрын
The cheap things that make me hundreds are the best. Go buy a thousand dollar machine and start out in the hole. Lmao
@StonemanRocks Жыл бұрын
@@Oneminutetofixit ok cowboy talk to me in 20 yrs!
@jasonbacues2999 Жыл бұрын
He won’t have time to. He’ll be busy counting all his money he made and saved.
@Oneminutetofixit Жыл бұрын
@@StonemanRocks no I didn't want to talk to you in the first place 🤣
@Man-in-da-shed Жыл бұрын
If it works for you then why not . COPPAH
@Oneminutetofixit Жыл бұрын
Exactly my point. Very cheap and renders pounds for me. All told I've done a few thousand feet of wire and it only cost me a pice of scrap wood and a filler wire.