Рет қаралды 11,462
Hello and welcome to my latest tutorial.
To make this pendant you will need -
• 0.8mm wire (20g), 2 x 11" (28cm) 1 x 8" (20cm)
• 0.315mm weaving wire (28g) 200cm (I wind mine onto a bobbin, but you can cut lengths as you go if you prefer)
• Heart-shaped Cabochon, mine is 25mm by 30mm (you can use a different size, just remember to adjust wire length and weave repeats accordingly)
I no longer put links to tools on here.
The tools I use are:
• Tronex needle nose pliers
• Tronex short round nose pliers
• Tronex razor flush cutters
• Beadsmith flat nose nylon jaw pliers
• Occasionally I use tronex bent nose pliers
• Occasionally I use heavy-duty wire cutters
• Occasionally I use xuron needle nose pliers
• Bobeeze bobbins (medium size with no extra weights)
How I oxidize my bare copper - • Oxidising copper jewel...
Facebook - / kellyjoneswirejewellery
IG jones_kel
My Etsy store - (where you can see my tutorials and jewellery for sale)
www.kellyjones...
Thanks for watching x