Рет қаралды 4,833
Hello and welcome to my latest tutorial.
To make this pendant you will need ...
• 0.8mm wire (20g), 3 x 6" (15cm).
• 0.315mm weaving wire (28g) 200cm (I wind mine onto a bobbin, but you can cut lengths as you go if you prefer).
• Large bead or drilled cabochon, mine is 20mm by 15mm.
• Small beads, 5 x 2mm
• Jump ring, 9mm outside measurement (or whatever size you have handy)
I no longer put links to tools on here.
The tools I use are:
• Tronex needle nose pliers
• Tronex short round nose pliers
• Tronex razor flush cutters
• Beadsmith flat nose nylon jaw pliers
• Occasionally I use tronex bent nose pliers
• Occasionally I use heavy-duty wire cutters
• Occasionally I use xuron needle nose pliers
• Bobeeze bobbins (medium size with no extra weights)
My Etsy shop - www.etsy.com/u...
Facebook - / kellyjjewellery
IG - kellyjjewellery
Thanks for watching x
Music is free from youtube;
Invisible Beauty - Aakask Gandhi
©2023 Kelly Jones Jewellery All Rights Reserved
Please do not copy, re-create or share this content in any format!
This content is created by me, for me (Kelly Jones Jewellery) as a means to promote my tutorials.
Thank you!