Рет қаралды 9,583
Hello and welcome to my latest tutorial.
To make this pendant you will need -
• 0.8mm wire (20g), 5 x 11" (28cm)
• 0.315mm weaving wire (28g) 300cm (I wind mine onto a bobbin, but you can cut lengths as you go if you prefer)
• Beads, 2 x 3mm, 2 x 4mm, 1 x 8mm
• Jump ring, 8mm outside measurement (or whatever size you have handy)
I no longer put links to tools on here.
The tools I use are:
• Tronex needle nose pliers
• Tronex short round nose pliers
• Tronex razor flush cutters
• Beadsmith flat nose nylon jaw pliers
• Occasionally I use tronex bent nose pliers
• Occasionally I use heavy-duty wire cutters
• Occasionally I use xuron needle nose pliers
• Bobeeze bobbins (medium size with no extra weights)
Facebook - Kelly J Jewellery
IG - kellyjjewellery
My Etsy store - (where you can see my tutorials and jewellery for sale)
www.kellyjones...
Thanks for watching x
Music: Chill
Musician: LiQWYD