Wireless Bridge for CCTV ( IP Camera over Wireless Network )

Wireless Bridge for CCTV ( IP Camera over Wireless Network )
👍 Recommended Guides
✅ The Ultimate Security Camera Guide V1
learncctv.com/...
✅ The Ultimate Security Camera Guide V2
learncctv.com/...
✅ The Ultimate Security Camera Guide V3
learncctv.com/...
👍 Recommended Products
SECURITY CAMERA KIT
------------------------------------------
4K 8CH PoE Security Camera System
👉 learncctv.com/...
IP CAMERAS
-------------------------
Wire-Free Pan & Til Camera with Rechargeable Battery
👉 learncctv.com/...
Wi-Fi Rechargeable Camera
👉 learncctv.com/...
🔎 OTHER PRODUCTS
----------------------------------------
Surveillance Internal Hard Drive HDD - 3.5 Inch
👉 amzn.to/2UVYzGz
👉 amzn.to/2JWag9K
Powerline Adapter (IP data over electric wires)
👉 amzn.to/2xgFhmf
CCTV Balun
👉 amzn.to/2XrFFZN
Wi-Fi Extender
👉 amzn.to/3aX21X7
Smart WiFi Router
👉 amzn.to/3aYlTZZ
HDMI Extender Over IP
👉 amzn.to/3eeU1mv
Under $25 Wi-Fi Camera
👉 amzn.to/2VhviF7
This Channel is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. This means that, at no additional cost to you, we may earn a small commission for qualifying purchases made through the links on our site.
#LearnCCTV
#LearnCCTV

[@LearnCCTV]

✅ The Ultimate Security Camera Guide V1 learncctv.com/ug1yt Video Course - Free Trial - learncctv.com/skill-ytc

[@josedhernandez7777]

It would be awesome if you did a video like this one with the actual hardware . I really enjoy all videos ! Thanks Mr Martins

[@RajeshBhulla9905r]

So simple

[@georgekibera4207]

you just brought it in time, i realy wanted to learn how the bridge connection works.

[@LearnCCTV]

Great. I'm glad I could help.

[@RajeshBhulla9905r]

So simple

[@stefanussenjaya1990]

Thanks for your sharing video sir.

[@LearnCCTV]

You are welcome.

[@TheKaffeeKlatsch]

It would be helpful knowing which ports you plug into on the switches and transmitters.

[@julies1134]

This is exactly what I'm trying to set-up. Thank you. My only question is: The NVR has PoE ports for the receiver (bridge) so do I need a PoE switch on the receiver side? Or can I just plug the receiver into the NVR?

[@LearnCCTV]

You need to use the bridge power adapter because it uses a non-standard PoE. The PoE ports from a NVR or switch could damage the bridge. (I saw that happen before).

[@julies1134]

@@LearnCCTV Thanks for the quick reply! What is a bridge power adapter? Your response said the ports from a NVR or switch could damage the bridge. Isn't that what your diagram shows (the receiver plugged into a PoE switch?

[@LearnCCTV]

@@julies1134 Sorry for that. The diagram represents the data (logic) connection. The switch won't power the radio because the cable it's connected to the data port. Just imagine the diagram you see with an extra power adapter that runs from your outlet to the bridge and that's it.

[@julies1134]

@@LearnCCTV Great! Thank you!

[@4davebert]

If there isn’t line of site between the two radios, can you have a second set in between? Like a repeater in the middle, going from point A to B then B to C

[@johnnymichaelconales2226]

Up to how many IP cam can be loaded in one Access Point? say 8MPX IP cam without clogging of data tx from AP tx to AP Rx

[@trikeboyztv7716]

Thank you for the video

[@LearnCCTV]

You ate welcone.

[@stateofmaharlikaphilippine5633]

Can any of those two be a Station and an Access point? Thank you for Your Answer

[@ngenocheruiyot6005]

i want to install a new cctv cameras in two stations A & B. the distance between the two stations is about 10 km apart. advice me on the devices i should use;the type of NVR/DVR, type of cameras, ip/normal, poe switch extender. Every branch should have 6 cameras installed and monitored at one STATION A. Pliz advice

[@LearnCCTV]

Wow, unfortunately, I can't do all of that because that involves a consulting job and I can't help every person individually. Please hire a local CCTV designer to work on a project for you.

[@AladarEdits]

How many receiver we have to install for multiple cameras in 500meter areas

[@LearnCCTV]

That depends on the angle of the installation and the bandwidth used by the cameras (according to the resolution, frame rate,etc) A FullHD câmera (1080) uses around 2.5 Mpbs and the receiver is capable of handling around 100 Mbps in the default configuration with direct line of sight. So, just do the math ;)

[@H.H.0]

The transmitter is access or station????

[@jamessmallwood7448]

can you use ip wireless camera with mac adress to make it only one epmp?

[@luiscalderon9058]

Any latency?

[@JustSamples]

Can i use a Ubiquiti nanobeam as the bridge?

[@LearnCCTV]

Yes.

[@ahmadziaahmadshafai6606]

Hello sir what is the resever or trasmeter name sir?

[@RajeshBhulla9905r]

How can convert analog to IP

[@LearnCCTV]

By using an encoder.

[@ahmadziaahmadshafai6606]

M5 or m2 device? Using

[@vernysguillem3013]

M5

[@ramjet4025]

Sorry, Your video fails to explain the subject heading.

[@LearnCCTV]

Thanks for your opinion, I beg to differ ;)