Wise old man wood spirit carving with Foredom and Dremel

kutzall.com/?aff=37
USE CODE: CARVINGAS to save 5% on burs and disks
Extreme bit: kutzall.com/collections/burrs...
Taper-burr: kutzall.com/collections/burrs...
Taper-burr: kutzall.com/collections/burrs...
Taper-burr: kutzall.com/collections/burrs...
Sphere-burr: kutzall.com/collections/burrs...
Cylinder-burr: kutzall.com/collections/burrs...
BenQ LED Desk Lamp with Swing Arm: amzn.to/2NwLySP
Diamond bit set https: amzn.to/3fy4USn
amzn.to/2WXwMZS
Rz Dust mask:kutzall.com/collections/gear/...
Keyless Chuck for Dremel: amzn.to/3Cekj45
Dremel Flex Shaft amzn.to/2DmcFKQ
Dremel 3000: amzn.to/357n5tW
Dremel 4000: amzn.to/3rXpgZS
Foredom tx: amzn.to/3bxVMdh
Foredom Speed controll: amzn.to/2GnaPLl
Handpiece, No.28, Tapered, w/ 1/8in. & 3/32in. Collets - H-28: amzn.to/3qKmAOI
Central Machinery 2 HP Industrial 5 Micron Dust Collector: amzn.to/2DwfRnT
Dremel High Speed Steel Cutter : amzn.to/3veVSQE
Carbide Burr Set : amzn.to/38bqPfm
Abrasive 4 Roll Multi Pack : amzn.to/3b7EoxL
Painting Brushes, 20pcs : amzn.to/392Zb32
Watco Rust-Oleum Danish Oil Wood Finish: amzn.to/35gWY2J
Watco Danish Oil Wood Finish Black Walnut: amzn.to/38lQK3S
Undrilled Imitated Pearl Acrylic Beads: amzn.to/3s2Iopk
Minwax Tung Oil: amzn.to/3tuq2OY
Rit DyeMore Liquid Dye, Racing Red: amzn.to/3rVDuKb
Colwood Woodburner: amzn.to/2P3EhXU
Wood: Cedar
#CarvingandSuch
If You Like To Support My Channel. 👇
www.paypal.com/donate?busines...
Contact: [e-mail]

[@bobbeyette3227]

Great job , love the detailing u put into this one. Thanks for sharing your talent

[@carvingandsuch]

Bob Beyette Thank’s 👍

[@MultiTom1956]

Absolutely beautifully done !! Love it😊

[@carvingandsuch]

Mahendra Tiwari Thx 😊

[@Matt-uj6jm]

Excellent instructional video as always 👍🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@johnburgos1967]

Nice carving like always..the finishing touches amazing👍.....

[@carvingandsuch]

Thank you 👋

[@user-ci9xv6kx8y]

Thank you for the video. As always, great job !!!

[@mountainviewturning5319]

Great looking carving

[@ronaldvanveen4930]

Very nice carving, wish i could carve like that

[@norik122]

Да, как всегда замечательная работа, благодарю за мастер-класс!

[@carvingandsuch]

Александр Новиков От скуки на все руки Thank you very much sir 👋

[@cornflakeusa]

Nice job, you make it look easy.

[@carvingandsuch]

Davy Stephens Thank you

[@JoseOrtiz-qv3qc]

Excelente Maestro!! Gracias por sus vídeos, aprendo mucho de Usted. Saludos!!

[@carvingandsuch]

Thank you 🙏

[@francoforleo4971]

Excellent!!!

[@markrhine5116]

awesome video . thank you for sharing the bits . that helps me.

[@carvingandsuch]

Mark Rhine If you have any questions let me know and if I able I answer 👍

[@markrhine5116]

i appreciate you showing me the bits your using and ok .

[@michaelrioux7696]

Amazing work i love wood spirits

[@carvingandsuch]

Glad you like it 😊

[@elainebendall1198]

Awesome 👍

Very skilled man u are amazing u all are

[@RUBAKA-]

Потрясающая работа 👍👍👍👍👍👍👍👏👏👏👏👏👏👏👏

[@ivanmunoz9018]

Maestro!!!.

[@georgeshover34]

Great job On the wizzed

[@ineszepeda239]

Soy fans de este gran escultor....bellisimos sus trabajos ..no me canso de ver lo que hace .....felicidades

[@carvingandsuch]

Thank you

[@oldwoodenman7262]

amazing work. thanks for making wooden people like me :)

[@carvingandsuch]

You’re welcome

[@SP4Parks]

I struggle with eye's & you make it look so easy , I keep watching. What is the long shank w/ small burr head you use around the eye's /

[@carvingandsuch]

Hey Eyes not easy I still struggling with them. What i use is a diamond bit and I bought it like a set from amazon. Really easy to find. Keep up doing eyes and all 👋

[@robertcolon647]

I want to start carving which wood is the one you use.Thank you for the videos

[@gypsywolf58]

Beautiful carving!! Is that cottonwood?? Love it! Thx for sharing!!

[@hertycounselor511]

What are the names of the Dremel tips you are using? What speed?

[@osvaldosanchez8417]

desde ARGENTINA lo saludo muy buenos trabajos GRACIAS por subir los videos

[@carvingandsuch]

osvaldo sanchez Hello from Florida 👋

[@user-jx4yw4mr5n]

у мастера руки золотые!!!

[@stevew4822]

Great and inspirational carving to a newbie carver like me. What wood donyo prefer to carve? Many thanks

[@carvingandsuch]

Hi there I using locally found driftwood of all kinds. Some of them soft some harder. I started with harder ones its slower but harder to make mistakes. Soft ones the bits goes into so fast if you not control the hand piece it firewood.

[@giuseppeciancio3484]

Bellissimo

[@carlosmariohernandezmunoz8906]

Hermoso trabajo, gracias por compartir, podría indicarme la referencia de las diferentes puntas que utiliza para desvastar y detallar, gracias

[@edwill62]

what sort of dust collector are you using ? spectacular carving..I use to do wood work , crafts, furniture, odds and ends...and then tried carving, but as I aged the wood smell and dust really got to me.....could not do it anymore.

[@carvingandsuch]

Ed Will I made that table what you see on the video. That’s a box with pegboard on top and 4 “ tube on the bottom. I attached my dust collector to it and the dust goes out of the other side of my shed. I wearing dust mask all the time. www.harborfreight.com/13-gallon-industrial-portable-dust-collector-31810.html

[@FirstLast-gk6lg]

advice on dealing with dust? my workshop is in an unfinished basement, havent started carving with a dremel yet but id imagine the dust would be extreme

[@carvingandsuch]

First Last Don’t start without dust collector even if you wear dust mask. I have this and totally worth it no dust around me. www.harborfreight.com/2-hp-industrial-5-micron-dust-collector-97869.html?ccdenc=eyJjb2RlIjoiMjE4NTExNDUiLCJza3UiOiI5Nzg2OSIsImlzIjoiMTc5Ljk5IiwicHJvZHVjdF9p%0D%0AZCI6IjM4OTEifQ%3D%3D%0D%0A

[@fabryrockfishing1979]

*hello😉 you are really very good🔝 Compliments👍🏼*

[@carvingandsuch]

Fabrizio Melishow Thanks a lot. By the way Very nice fishes !! I like to fish too 😁

[@fabryrockfishing1979]

@@carvingandsuch * Your compliments are worth like gold😉 I also do odd jobs with wood, but I'm scarce😁You are a phenomenon🔝*

[@eugenesoreng4016]

Give the link to buy

[@eugenesoreng4016]

From where to buy it

[@timlist4173]

So, basically, you cut away everything that doesn't look like a wood spirit. J/k, job well done.

[@jeaninewilliams4000]

Hi, are all the burs you are using after the Kutzall, diamond burs?

[@carvingandsuch]

Yes

[@macadamparty]

hi I wanted to know what brand is your machine sculpted?

[@carvingandsuch]

macadamparty Hi The first i using is the Foredom tx and after Dremel 3000

[@macadamparty]

@@carvingandsuch merçi a toi

[@eugenesoreng4016]

What is the machine's model name

[@aeviwright7846]

Is this based on the old native tales of the wise old man, or simply a wise old man in general? My great grandfathers tribe claims he came to them and showed them a cave to hide in months before. "a great sky fire destroyed the land" A cave they still live near to this day, despite geological evidence suggesting that the last meteor impact of such magnitude was around 12,000-13,000 years ago. Either way it's an impressive and beautiful piece of art yet again, especially if based on an entity known to speak through wood-crafts and those open to creation and kindness.

[@carvingandsuch]

I named this one. Thats a really interesting tale. I going to print out and always remember this tale. Thanks for sharing.

[@aeviwright7846]

@@carvingandsuch I'm glad you appreciate it, Other tales claim he drifts on the wind helping those in dire need and inspiring works of art. He is said to be partial to the forests of north america but I have also heard tales of him guiding Inuit tribes to safety. I like to think he's behind all the interesting discolorations I find while cutting up fallen branches. A prime example today I found a spot that looks like a spade coming from the core. If it posted I treated the surface with superglue to prevent splitting and to make the sycamore more durable. cdn.discordapp.com/attachments/287926107205009410/651631851760386049/IMG_20191203_195125.jpg

[@diditwahyupermadi1183]

What is in under the table? Exhaust?

[@carvingandsuch]

Didit Wahyu Permadi yes and that leads to my dust collector 👍

[@Poordirtfarmer]

What tip are you using

[@carvingandsuch]

Most of them are Kutzall you can find them here kutzall.com?aff=37

[@fernandohonoratodasilva6020]

Qual valor comercial dessa obra?

[@walterjosedasilva8460]

what's the name of this wood?

[@carvingandsuch]

walter José da Silva Driftwood hard to tell what three was originally . Sometimes I just find and use roots too

[@user-pp5jl3mi9l]

ياسلام 💋💋

[@junebingham4213]

it says he is using driftwood up in his post under more

[@Poordirtfarmer]

Cool 😎 cool 😎👍👍 om trying to learn mine are ugly face walking sticks

[@carvingandsuch]

Keep on trying you gonna be better and better every time 👍👍

[@zhihanxaliawox5944]

Krenn

[@nusberg9300]

🐎and🐆?????

[@curlybutton8982]

Hey follow him on Instagram

[@curlybutton8982]

It’s Carving and such