C'est juste merveilleux ce que tu fait. Quel talent ! Wow ! Merci du partage 🙏🙏🙏👌😘
@mikegriffin63454 жыл бұрын
I really enjoy your carvings and your technique you use to cause your creations to have expression especially around the eyes, but everywhere else as well. Thanks for sharing your talent!!!
@carvingandsuch4 жыл бұрын
Thank you I glad you like 👍
@chrisisnowliftingstuff32484 жыл бұрын
Just bought my first Dremel drill this week and started carving today. I have a looooong way to go but it's so engrossing and fun to do. I'd like to do some Christmas ornaments and a walking stick for a buddy that had his stolen from his front porch. He used it for morel hunting. Anyway I think this is fantastic!
@carvingandsuch4 жыл бұрын
That’s awesome to hear. Don’t forget wear dust mask all time and safety glass. You don’t want that high speed bits in your eye. Good luck happy carving👍
@ookie41792 жыл бұрын
I think you’re fantastic 😦
@sofaking87542 жыл бұрын
He would be so happy and proud to have you as a friend for sure. I think the wizard / tree man, would keep with the magical fun and spirit that goes with mushroom hunting. You should post som pics of your first time with a dremel. It looks so fun and relaxing
@sovietgeb38882 жыл бұрын
real question is, who the hell steals walking sticks 😭
@irakas23 Жыл бұрын
I'm new to Dremels, but this thing has been great. kzbin.infoUgkxfPgcZ5_Cl0HDUKkMJAKde11YKQZVgMoR The variable speed is awesome and the cordless aspect makes it so easy to work with. I am constantly finding uses for it that make tasks easier. Recently I put in a new deadbolt on one of our doors. I knew I had to enlarge the hold where the deadbolt goes into the door frame. At first I thought I would have to get a big router and figure out how to use it for that, but then I rermembered we have the dremel. I was able to enlarge the hole almost as easy as if I was drawing with a pen. It's also great for grinding our dog's nails done and so many other household tasks.
@carvingandsuch Жыл бұрын
I think so too 👍
@cleonesoncabreirasoares87884 ай бұрын
qual tipo de fresa v.c usou pra fazer esse desenho au
@kenyork11073 жыл бұрын
Got me a Dremel today , found your video . It was great , gonna try my hand at it tomarrow . Keep them videos coming . Thanks from Trenton ,Georgia .
@carvingandsuch3 жыл бұрын
Glad you like it. Go for it and keep the dust flying 👍😁
@ReviewWingsDSP29 күн бұрын
Need to upgrade my dremel. Mines only good to do post knife stuff. Know where my next check is going.
@carvingandsuch15 күн бұрын
😁
@dannyarrowheadstalker30542 жыл бұрын
I've got an older model Dremel which isn't easy to use for a long time. You make it look like childs play. Masterful work!
@goatsinker3473 жыл бұрын
Very awesome. His pupils might look more intriguing with shiny black beads pressed in the holes.
@killslay4 жыл бұрын
All right, you've convinced me. I'm getting a Dremel
@carvingandsuch4 жыл бұрын
Go for it you won’t regret and they cost not that much. All the bits I using in the description just in case👍
@ptm35793 жыл бұрын
Takes talent cheers mate!!
@umutcangunel14473 жыл бұрын
@@carvingandsuch It's expensive here unfortunately :(
@carlospenate80633 жыл бұрын
Damn right boi I'm ordering right now
@isaiahbraddock3 жыл бұрын
@@carvingandsuch do the bits work with other brands that are not Dremel? I have one that has been lying in my basement for a while because none of its attachments work well.
@StevesOutdoorCameraAdventures02 жыл бұрын
fantastic work, what bur bit did you use for the nose please
@carvingandsuch2 жыл бұрын
Taper Kutzall bit. Is that what you mean?Thank you. kutzall.com/products/taper-burr-1-8-shaft
@glennaadams84123 жыл бұрын
You not only do amazing work, but I love all the music on all your videos.
@carvingandsuch3 жыл бұрын
Glad you saying that thx
@johnnysarsett19694 жыл бұрын
incredible woodwork, congratulations !!!
@carvingandsuch4 жыл бұрын
Glad you like it!
@j.r.r.toking3 жыл бұрын
Amazing art and craftmanship
@regisdematos888Ай бұрын
what is the name of the power tool you are using by the way nice work.
@carvingandsuchАй бұрын
Dremel 4000 and Foredom tx. Thanks a lot 🙏
@Woodturningchannel-wtc17 ай бұрын
Wow, you are a freaking genius. Everything is amazing.
@carvingandsuch7 ай бұрын
Wow, thank you! 🙏
@dragonshoarddesign30942 жыл бұрын
I am a goldsmith is use micromotors and flexshafts daily for years today I had a rotory blade on my foredom and it caught on the block and walked its way around and took chunk out of the end of my left index finger almost took the tip off. Amazing work my guy but seeing what we do after nearly choppin the end of my finger off sigh.... we walk a razors edge I didn't realize til today.
@carvingandsuch2 жыл бұрын
I think it’s pretty safe, what I recommend staying away of the extreme bits. If those bits jumps the fingers get hurt. The corse bits jumped several times but did no damage.
@Bigjohn91812 жыл бұрын
Thank you so much for showing me how to carve the awesome wood spirits ❤️😎👍😁
@carvingandsuch2 жыл бұрын
Glad you enjoyed it!
@Gene-XL2 жыл бұрын
What is the music? I love it!
@davcarps88073 жыл бұрын
Great power carving skills...soothing too!
@sternwartevach Жыл бұрын
Wow! What a wonderful piece of art! 😍
@carvingandsuch Жыл бұрын
Thank you so much 😀
@83delgado3 жыл бұрын
That would be an awesome bong
@DM...4 жыл бұрын
Just incredible. Can you show us which gringers you used?
@carvingandsuch4 жыл бұрын
Foredom tx and dremel 3000 thx
@DM...4 жыл бұрын
@@carvingandsuch i mean the heads that you change in the top.
@AdventureBon992 жыл бұрын
This is amazing trying now but o need to know what head to use. Any suggestions? Best wishes
@carvingandsuch2 жыл бұрын
Hey check out the description. I believe it’s all there. Hope this helps. Thx 👍
@AdventureBon992 жыл бұрын
@@carvingandsuch yeah okay I didn’t realise there was all this I’m still old man on this. Even though me 30. Safe my bro
@BuildDadBuild3 жыл бұрын
Very cool. Nice work. Cheers
@kiarinis6912 ай бұрын
AMAIZING !!!😍😄😄😍
@carvingandsuch2 ай бұрын
Thanks 🙏
@AyaAya-hr9qd4 жыл бұрын
A beautiful and nice work . Please the name of the tree or wood .
@zborzlsbenni69543 жыл бұрын
Not 100% sure but i believe it's birch
@leksey78704 жыл бұрын
It turns out beautifully! Good luck to the master!
@carvingandsuch4 жыл бұрын
Thank you so much!
@thedjkay2 жыл бұрын
I see you using the Dremel and also the air Compressor multi craft is there a technique difference for keep switching between them?
@carvingandsuch2 жыл бұрын
The other one is like the Dremel called Foredom. Electric and pretty powerful. Easy to remove woods because it’s stronger than Dremel. Thx
@alexerolski4 жыл бұрын
Amazing! And now a simple stick is alive! ))))) Bravo Master!
@carvingandsuch4 жыл бұрын
He’s lucky not landed into a fire pit 😊😉
@hypnoraythompson58245 жыл бұрын
you made that look easy, nice piece mate.
@carvingandsuch5 жыл бұрын
hypnoray thompson Thank You 👍
@gemonkselemchannel28845 жыл бұрын
Visit my channel for suport thanks🙏🙏
@clementbarthelemy76892 жыл бұрын
Hello ! Your work is amazing. I'd like to try woodcarving. Can I ask you the references of your dremel tool if possible ?...
@carvingandsuch2 жыл бұрын
I using Dremel 3000 with lex shaft. I think that’s perfect to start with. Thx
@clementbarthelemy76892 жыл бұрын
@@carvingandsuch Thank you very much for your answer!
@Dicadocheiroso Жыл бұрын
Hey guys. Can anyone tell me what wood this is? Sensational! Very good to work!
@carvingandsuch Жыл бұрын
This one is driftwood probably willow from the river bank nearby. Thx
@kfam362 жыл бұрын
Hi, great video! I'd like to buy a tool for my dad, what is the name of the silver one that you use at the start of the video please? In the middle of the video it's a dremel and my dad has that but I'm interested to know what the silver one is, please?
@carvingandsuch2 жыл бұрын
Hi that’s a foredom tx. Super powerful power carver. Thx
@vbonzo2 жыл бұрын
Your work is inspiring BUT, you make it look so easy!! I want one of these in my backyard on a dead tree that's just begging for it! Thank you for this demo.
@levinskraba13193 жыл бұрын
WOW, that's is so cool. LEGENDARY WOOD CARVING
@teckzusferalupus53824 жыл бұрын
Oh! I have a Dremel sitting here. Great to see i can do such work with available tools. Amazing job!
@carvingandsuch4 жыл бұрын
Go for it , make some dust 😎👍
@nicolebrokkeduce16934 жыл бұрын
Lovely! Can I do this with just with a Dremel 2050 Stylo ?
@carvingandsuch4 жыл бұрын
Sorry I don’t know. Never used Stylo. Thx
@emdee8840 Жыл бұрын
Wow. Amazing. Thank you for sharing your process.
@carvingandsuch Жыл бұрын
Thanks for watching! I have many more videos to watch 😉
@Grambo19464 жыл бұрын
What kind of wood did you use please, you are fasinating to watch.
@carvingandsuch4 жыл бұрын
Hi Glad you like it. This piece came from the piece river, I really not sure what kind
@verumfabula55714 жыл бұрын
This branch is very soft for carving by dremel. What kind of tree it is?
@theartist8374 жыл бұрын
What kind of wood? Great work
@carvingandsuch4 жыл бұрын
Collected from there kzbin.info/www/bejne/a5abdWeFi7KNjKs
@bengaleses3 жыл бұрын
WOW wow wow, se nota los años de práctica que tienes. Esas brocas no aparecen en Amazon?.
@JohnMarstonRDR23 жыл бұрын
Entra en amazon y buscalo XD
@bengaleses3 жыл бұрын
@@JohnMarstonRDR2 Jaja LITERAL.
@everythingisvibration5 жыл бұрын
Wow Jordy,, you are blowing up !!! Glad to see that,, for those wondering he was using all Kutzall coarse burs here I believe. Highly suggest them. My fav. The extreme & coarse cone, the long Extreme & coarse & the sphere Extreme
@carvingandsuch5 жыл бұрын
Hi Thanks but I am not Jordy. Anyway Kutzall are the best. Cheers.
@leeetchells6093 жыл бұрын
Great. You really brought that log to life. What type of wood do you use ?
@samir18433 жыл бұрын
I want to get started to wood carving, any recommendations for tools?
@carvingandsuch3 жыл бұрын
Dremel with a flex shaft. And 2 or 3 Kutzall bits. start from there and you will see what’s you need after
@samir18433 жыл бұрын
@@carvingandsuch thank you so much!
@baz94872 жыл бұрын
New to your channel and loving your vids. Thank you. I really want to start this. Whats best and worst wood for this kind of thing? Thanks
@carvingandsuch2 жыл бұрын
Glad you like it. Good to start with cottonwood bark , poplar or cedar. Stay away from pine , basswood /too fuzzy/ , oak .Try different wood species yourself and you will find your favorite 👍 thanks
@baz94872 жыл бұрын
@@carvingandsuch Thanks. Will start next week and see how it goes :)
@ΚωνσταντίνοςΚάτσινος4 жыл бұрын
Very nice!! I am using chisels and knifes in my carving, but i would like to try powercarving too. Can you provide me some information about the rotary tools you use and the bits? Does cheap rotary tools do the work?
@carvingandsuch4 жыл бұрын
I did the opposite used first power carver and now i practicing with knifes. I using Foredom tx and dremel 3000. The Dremel lot cheaper but not that powerful. The bits are mostly Kutzall and diamonds for details. I never used any other rotary tools so i cant tell about much.
@JonathanArriaga-x2c11 ай бұрын
Dónde consiguiste tu Dremel amigo se ve muy potente me encanto
@carvingandsuch11 ай бұрын
Amazon or local stores like Lowes. Thx
@fabienlamour36444 жыл бұрын
Have one since many years... Always speak to him.
@CallMeDiis2 жыл бұрын
Dude you helpd alot Showing us this tools!! so greatfull!
@carvingandsuch2 жыл бұрын
Glad you like it. Thx for watching my videos 👍
@RoysTimberArtTechniques-mv6gt9 ай бұрын
I need to keep practicing but don’t think I will ever be able to do what you do
@michaelarmstrong55864 жыл бұрын
it looks great and a like the way you do your eyes
@sickboy12763 жыл бұрын
Hello very impresse by your job !!! could you tell me what kind of wood it is ? Pehraps you already did an answer but i m french it s easier to ask you. Merci
@carvingandsuch3 жыл бұрын
I believe it’s willow.
@RiganoBuilding3 жыл бұрын
Simple and nice. Great job. Subscribed and belled! Thanks!
@carvingandsuch3 жыл бұрын
Thank you 🙏 👍
@germanramos33192 жыл бұрын
Buen video una pregunta que tipo de madera y fresas se utilizan para talla en madera?
@carvingandsuch2 жыл бұрын
Dremel 3000 ,I use drift wood ,poplar, cedar basswood and cottonwood bark. Thx
@miluskasantacruz57054 жыл бұрын
Wow!! Did you use dremel stylo?? dremel micro???
@carvingandsuch4 жыл бұрын
Dremel 3000 but for Christmas I will upgrade to a 4000.
@natilion29694 жыл бұрын
I LOVED IT. BUT WHAT IS IT CALLED THE TOOL YOU ARE USING?
@carvingandsuch4 жыл бұрын
Foredom tx and Dremel 3000 thx
@ianwood82233 жыл бұрын
I really enjoyed the video and I intend to use this method you’ve used .i haven’t started yet I’m waiting for some burrs to arrive could you tell me what sort of cheese no I mean wood you use thanks and keep them coming Ian in the Uk
@carvingandsuch3 жыл бұрын
The cheese one called willow. I was lucky with this one there was no holes on it 😁😉 great way to kill time and take your mind away of what happening around us. Good luck 👍
@vanleric2 жыл бұрын
Bonjour 👋 quel est le bois que tu utilise ? Merci à toi
@carvingandsuch2 жыл бұрын
This one willow drift wood. I use cottonwood bark,poplar,cedar,and some furniture legs Sometimes. Thx
@donniechappelle55303 жыл бұрын
This is so inspiring. Great work !!
@carvingandsuch3 жыл бұрын
Glad you like it. Great way to relax for me 👍
@dgheaa75352 жыл бұрын
Could ya list the bits you are using plz
@carvingandsuch2 жыл бұрын
The bits and the links in the description 👍
@dgheaa75352 жыл бұрын
Ok ty
@burtgraham36893 жыл бұрын
nice job curious to know what the name of the burr you used to do most of the carving
@carvingandsuch3 жыл бұрын
You can find them in the description 👍👋 thx
@hugocunha75423 жыл бұрын
Wow! Amazing! Would you have any advice for a carving tool to buy for a beginner? Would A dremel be good enough for this? Or would I need some other type of model?
@carvingandsuch3 жыл бұрын
I using Dremel also model 3000. Still running strong. I believe for starting that’s a good choice 3000 or 4000 is up to you.
@jayc31104 жыл бұрын
A beautiful work.... And so quick! - Thank you for showing us your methods. - Could you please do a video on how your dust collection system works?... Thanks again.
@carvingandsuch4 жыл бұрын
Jay C Working on it thx👍👋
@jayc31104 жыл бұрын
@@carvingandsuch - Oh, glad to hear that, thank you! I am looking forward to seeing your system (i hope it is a simple and compact one!)
@joanndewitt81934 жыл бұрын
@@carvingandsuch bi bi
@3_E_E_E4 жыл бұрын
Hi ! Can u plz guide me which tool kit should i buy ?
@carvingandsuch4 жыл бұрын
Dremel 4000 , Kutzall bits, and some diamond bits too.
@tamilselviagatheswaran58714 жыл бұрын
Kindly tell were the carving machine you are using is available
@carvingandsuch4 жыл бұрын
Try EBay or amazon. 👋
@badalphurailatpam89654 жыл бұрын
Great work...Can i get the information of the tool you are using
@carvingandsuch4 жыл бұрын
Hi Foredom tx and dremel 3000 and the bits most of them Kutzall and those in the description too 👍👋
@badalphurailatpam89654 жыл бұрын
@@carvingandsuch thank you. You had a amazing skill want to see more..
@carvingandsuch4 жыл бұрын
will do more 😉
@brianconley17324 жыл бұрын
How do I start to make a saw dust collector or is there a premade table top model I could attach my vacuum to???
@carvingandsuch4 жыл бұрын
I built mine. Not difficult at all. Just built a box you decide how big but not too thick. Bottom there is a hole to connect my dust collector hose. Top as you see a pegboard. I sealed all the joints and done ✅ 😉
@johnwayne12414 жыл бұрын
Amazing work sir! Would it be possible to know the type of bits you're using on your mini tool?
@carvingandsuch4 жыл бұрын
Hi check this out hope you can find answers. kzbin.info/www/bejne/fYbVkGWLnZVpgLM
@johnwayne12414 жыл бұрын
@@carvingandsuch thanks very much for the quick reply
@franckirior34282 жыл бұрын
Bonjour que fau t'il pour sculpter du bois s'il vous plai
@anoopachaiahanoopachaiahas64222 жыл бұрын
What is the cost and from where I can get it please let me know I need it
@carvingandsuch2 жыл бұрын
What do you need?
@guyshred39493 жыл бұрын
great carving skillz! thanks for showing some techniques, ive tried them now and find it easier to carve faces.
@carvingandsuch3 жыл бұрын
Great 👍 thx for watching 👋
@NJY3412 жыл бұрын
Travail de pro félicitations à l'artiste bravo
@carvingandsuch2 жыл бұрын
Thank you so much
@miguelangelnunez23453 жыл бұрын
Hello! Great job!! Can you please tell us what kind of burs you have used for this job? And where can us buy them
@carvingandsuch3 жыл бұрын
In the description you can find all. Thx 🙏
@pinoygoldtv98962 жыл бұрын
Nice work/ HOw much you sell it?
5 жыл бұрын
Hello and best regards. Very beautiful woodwork. What wood are these sculptures made of? Where can I buy the cutters you use and such a Dremel?
@carvingandsuch5 жыл бұрын
Jacek Miżejewski Hi This one is a cubal laurel oak. You can able to buy burrs from amazon or eBay 👋
@waltermaggiori6383 жыл бұрын
What wood is this? Thank you.
@MJFAN6663 жыл бұрын
How many years does it take to do something like this in 10 minutes?
@11-edrean474 жыл бұрын
Hello, thanks to machinerey People can acomplis this, whitout almost Nobody wood try this, you can tell you already made a lot off this woodspirits, with that tool, do you have the patience to do one without this tool, a wonder.... Nice style
@Vika79285 ай бұрын
Шикарно и без лишних слов. Тоже хочу начать. Надеюсь, хоть что-нибудь получится
@carvingandsuch5 ай бұрын
Thank you so much 🙏
@rushz38694 жыл бұрын
Wow ftom where can i buy that drill machine ??
@darrylthehorntoadpiper4 жыл бұрын
Wow just outstanding 👍 what type of wood were you carving??
@carvingandsuch4 жыл бұрын
Some kind of driftwood hard to tell because it’s really old and dry.
@ШамильБаруевО5 Жыл бұрын
Привет брат из России город Ярославль. Учусь по вашим видео! Огромное спасибо тебе брат!
@timleo2291 Жыл бұрын
What brand of rotary tool are you using. Pls advise
@carvingandsuch Жыл бұрын
I have 3 kinds Dremel 3000 and 4000. Also I have a foredom tx. Foredom have a lot of torque and powerful, dremels got the speed.
@MultiTom19565 жыл бұрын
Absolutely beautifully done jordy . Thank you
@carvingandsuch5 жыл бұрын
Mahendra Tiwari Hi I think you mistake me with someone else. I am not Jordy but thank you.
@MultiTom19565 жыл бұрын
@@carvingandsuch oh I'm so, so sorry ! Got mixed up with names 😊please forgive me .
@carvingandsuch5 жыл бұрын
Mahendra Tiwari No worries 😉
@igorraskolnikov112 Жыл бұрын
Que modelo de dremel utilizo para realizar esa artesania?
@carvingandsuch Жыл бұрын
Dremel 3000
@javierascencio91054 жыл бұрын
Que accesorios dremel usó?
@fishraviolli43734 жыл бұрын
What Dremel did you used? I noticed that you only mentioned the flex shaft in the description
@carvingandsuch4 жыл бұрын
3000
@fishraviolli43734 жыл бұрын
CarvingandSuch Thanks!
@alegzander19713 жыл бұрын
Hello. What's the speed of the big rotary tool? I have bought a Wolfcraft flexible shaft for drilling machine, maximum rotation speed 3500 rot/min. But it seems to be too slow, does not carve good. Can not be compared to Dremel or a high speed die grinder. Is yours a faster one?
@raymondojones38303 жыл бұрын
ShT tool are you using for carving this wizard? Thanks
@carvingandsuch3 жыл бұрын
Dremel 3000 and Foredom tx. Thank you
@notyah24115 жыл бұрын
Please can you tell me what make and size of bits you use around the eyes.
@edmundodelahoz47033 жыл бұрын
Que tipo de fresa es la que esta en el video?
@mariahidalgo43634 жыл бұрын
Como se llama la herramienta que usaste y en que tipo de madera.
@baiwangwanghumwanghum95874 жыл бұрын
Your work is amazing, and I also love background music too. can you pls tell me the song?
@carvingandsuch4 жыл бұрын
I trying to find it for you thx
@baiwangwanghumwanghum95874 жыл бұрын
@@carvingandsuch thanks for your kindness. M waiting
@carvingandsuch4 жыл бұрын
no1:The_Day_Is_Close no2:Wide_Awake
@baiwangwanghumwanghum95874 жыл бұрын
@@carvingandsuch i found the title and the song dffrnt my friend. (No.1)
@scott54562 жыл бұрын
Can you suggest a bit kit for me, manufacturer and type please? Thank you, S.
@carvingandsuch2 жыл бұрын
Hi You can check the description for links I believe what I using it’s all there. Few Kutzall bits to start and a carbide set for details. You can add some later. Hope this helps let me know if you have more question 👋
@scott54562 жыл бұрын
@@carvingandsuch thank you.
@RoysTimberArtTechniques-mv6gt6 ай бұрын
This is wonderful I also make wood spirit but turn them in to bird houses ❤