🚁WLtoys V950 Collective Pitch RTF Helicopter

[@robertz5958]

Thanks for the excellent video and double thanks for sharing your knowledge of this cool and certainly capable low cost helicopter! It's folks like you who freely give their time, that help less experienced people, (such as myself), get into these hobbies without endless frustration and broken models! You're a champion! Cheers!

[@jerryarpaio]

That’s honestly the best rc video I’ve ever seen. Thank you so much! Subscribed.

[@chumpolprasongphol9144]

Very understand good detail ... Make me confident... 😄from Thailand

[@johncgibson4720]

I just ordered the v950 main shaft as a substitute shaft for my 250 gram 200 sized FPV helicopter. I notice that Ohio model and Logo and Horizon are trying to converge their 200 sized heli using direct drive main motor, getting rid of the main gear and using the exact same diameter(4mm) and length(90mm) main shaft. I hope the v950 main shaft also is 4mm in diameter, and soon everyone will fly 200 sized heli FPV because it has extreme endurance as most helis do. Mine flies for 35 minutes per charge.

[@sisterstate7216]

Excellent video. Thanks!!!

[@electroumit]

Thank you for this wonderful video.

[@RC-Experimentalist]

Hi. I have Blade 230s but thinking about getting this heli. Do you know how it compares to Blade 230s? Similar in size and performance?

[@leonbroekharst4724]

Super video

[@TheBigHoneyBear]

Very good video, thanks. I bought that "ready to fly" model some time ago, but it is not "ready to fly" at all. Like in your video at exact 9:22, the heli tends to tilt to the left side, right before the lift off. I tried to use the digital trimming on the radio, but it did not really change a lot. Will the digital trimming me memorized or do I have to do this each time? When the heli is in the air, it is impossible to hoover on the spot. The linkages at the rotor are all set (the swash plate is 100% horizontal/neutral). Any idea what I can do? Has anyone done some trimming on this model? I am not very experienced, but the user manual is in "Chinenglish" language - impossible to understand.

[@jerryarpaio]

Just make the correction when you get off the ground. In my experience every helicopter does this no matter how you set it. It always starts off pulling to one side or another but quickly straightens out once it’s in the air. It may have to do with weight balance.

[@TheBigHoneyBear]

@@jerryarpaio Thanks for your reply. I am aware that you have to get off the ground, because of turbulences, etc. However, I would expect that it hoovers pretty straight on the spot once it is in the air. I guess my expectations have been way too high towards a product of this price level. I will give it a couple more tries, but eventually sell it on ebay, if the performance can't be fine tuned any better.

[@Spectrical]

Hey there which should I get for 3D this or XK K110 Which one is easier

[@fyresg]

XK K110 is easier than this.

[@muttbone01]

I have to ask, were all the outdoor test performed on the same battery? (It seems like they might have been), this could absolutely affect how the bird flies going from one rate to another, pirouetting an tail stability, what with a brushed tail motor.

[@fyresg]

It was done such a long time ago that I can't say for sure, but I think it was done with the same battery. And yes, its tolerance for poor collective management become lower as the battery weakens.

[@shawnomack45]

I bought one of these last year and when I tryd it for the first time the tail rotor wouldn't work.

[@stevemanson9635]

looking good ....so sensible upgrade from a 977 ??

[@fyresg]

This one flies ok but definitely not awesome. If you just want a larger version of V977, then yes. If you want a more capable heli than V977, then no, it's not much better.

[@MrDVCHITTer]

If you want a heli this size just get a blade 230s. Better quality and better vendor / aftermarket support.

[@mrpalandeng]

Steve Manson yeah and much more expensive. i think for beginners this is a good heli

[@darexg]

Hey Fyre! Could you please tell me what is the cheapest heli model with brushless tail motor?

[@fyresg]

I haven't been paying attention to helicopters. The last time I checked, HiSKY HCP100S is a dual brushless micro helicopter. I don't think there is a larger tail-brushless heli in the market.

[@darexg]

Fyre SG missed this one. Thank you!

[@ArcherAC3]

Mate, I just got my V950 from Banggood and it's missing the bloody battery charger with the wall output and this adapter. Instead, it came with a cheap USB lipo charger that I'm not even sure where to plug it into - I don't think I'm supposed to charge the battery on my PC USB Port, right?

[@fyresg]

I won't dismiss that USB charger as a wrong one. There are legit USB 2S chargers. Does it look like it accepts the balance plug?

[@ArcherAC3]

@@fyresg Apparently, yes. But I've been using it plugged into a mobile phone charger. I was checking the voltage during the charging, and it climbed from 11.4 to 11.8 volts (it's a 3 cells battery), so it is charging, but I'm not sure if at the adequate rate. Also, the manual doesn't say if the charger's red light will blink, turn off or stay on when the battery is charged - it only says "after the charging is complete the red light," and the sentence ends lol. Thanks for the reply!

[@BrGoBu]

Do you know if the wltoys v931 transmitter will work with this heli?

[@DBOBK]

yes

[@WildCaptures]

Great flying this Heli has my interest👍

[@brettmccafferty7510]

I bought one unfortunately. One of the servos stripped on the 1st flight causing a crash 2 feet off the ground. Bent the main rotor shaft and rotor links. Fixed it. Now the tail turns slowly in one direction and can't be trimmed out. I also have a blade helli I have crashed a few times and no problems. Spend the extra money on a quality helli like blade or align.

[@donaldtrump2078]

The weight and power definitely makes this a fly, crash and fix helicopter, better have some spare parts on hand!

[@ArcherAC3]

Don't crash

[@kanarimentos7056]

mr sg i do have problem with my heli 950 keep lean to the left and then crash its sitting 1 year on shelf

[@fyresg]

You need to do a complete check. There are many steps but I will just briefly highlight a few: check that the swashplate is level at 50% collective. Check that blades are not damage, not causing vibrations. Check that the swashplate moves correctly according to your cyclic commands.

[@vandamnjaunclode9813]

in your video means i have to adjust linkage after i opened from box

[@fyresg]

You should check yours to see if it needed adjustments. Mine needed, so I did it.

[@vandamnjaunclode9813]

Fyre SG mine some time i canot control.t its drift to left side and hit the ground

[@itch4travel]

Will the V977 controller work with this V950? I intend to order just the BNF if it will work. Thanks.

[@fyresg]

Sorry, I don't know. Please ask the seller.

[@sookaiqing]

can bind with v977 control?

[@fyresg]

Yes.

[@JuanSpeedAudio1]

Exelente video 👍

[@MicroRCFiend]

Interesting heli from WLtoys, they must have been scared I would thrash it too hard to send me one :) Winter is coming , I see dark rainy nights hibernating on the sim gain real soon. Do you use Phoenix online?

[@fyresg]

I'm pretty sure you'll get one. This thing is very new, so give it some time. I used to fly Phoenix RC5 but nowadays, I'm just too busy. That's why I messed up my V950! I need more stick time with helis...

[@MicroRCFiend]

I'm hoping XK release a 180 size CP that flies as well as their K110/K120. I found heli vids don't get even close to the interest as quad videos but I still prefer flying them

[@erichiles9568]

What the little button for on receiver on v950

[@fyresg]

Bind button.

[@erichiles9568]

Thanks on bind button

[@erichiles9568]

Better off taking out of box a replacing servos rite off rip

[@klasiversen1916]

The hvoer button on the remote TAP IT 3 TIMES FAST then you see the blades on the helli start to blinking in the screen, hover the helli... test it out, it vorks.

[@fyresg]

Thanks for sharing. I'll try that when I have the time. What's the benefit of this function? I'm trying to understand why anyone would need that. Instead of moving the throttle stick up to lift off, we press the button 3 times. The hover button feature sounds worse to me.

[@creativename2697]

@@fyresg hover debugging

[@mrpalandeng]

so if im correct, 6g mode u cant 3d. and idle up only when u in 3d mode? so 3d mode idle up and 6g mode idle switch off

[@fyresg]

You can't do 3D in 6G mode, but you can Idle-Up in 6G mode. Idle-Up means to use a different set of throttle and pitch curves, which are independent on the selected stabilization system (6G vs 3D).

[@mrpalandeng]

on 6g is it better to use idle up or normal? thnx for ur reply!

[@fyresg]

Always use Idle-Up for any flight modes. But you must learn not to reduce throttle to 0%, especially during a crash; use throttle hold instead.

[@mrpalandeng]

Fyre SG okey, but when i land turn idle up off? cuz of the negative pitch? i ordered my heli so i didnt fly it yet. thats why al the noob questions ;)

[@fyresg]

You don't have to turn Idle-Up off. Just be aware of negative pitch, and know to do the right things. You should know why Idle-Up is so good. It is good because throttle is almost constant and you control the helicopter with collective and cyclic pitch. This means it is very responsive to your commands (no lag).

[@Thailand-Servant-111]

Thanks for good review !

[@etopsflight]

I'm a V911 and V977 owner. Love the 977 but it's a little on the small side. V950 appeals to me very much but 2 points that have put me off. Firstly its not available as copter alone, don't really want another of these transmitters. Secondly, prefer to stick a 3s 2200mah lipo without modding the gear assy. Love the XK K120 and K124, possibly should have gone with the K120 over the V977 as that the heli is a little bigger and the transmitter is sweet. My friend bought the V950, plastic looks quite cheap and he broke one of the header forks that guide the pitch rods. I too am looking to see if XK brings out a competitor for the V950.

[@airpic5253]

Bangood has a BNF, but with no battery and no charger, check out link below. www.banggood.com/WLtoys-V950-2_4G-6CH-3D6G-System-Brushless-Flybarless-RC-Helicopter-BNF-p-1119984.html?rmmds=search

[@etopsflight]

Airpic Thanks for the reply but recently too busy flying my Mavic Pro and with some 250 and mini brushed quad builds in the pipeline, help flying is on the back-burner for now. Still awaiting a more robust XK version!

[@airpic5253]

I have not built one yet myself because of the time factor, I will one day as I have the tools but enjoy flying them too much.

[@airpic5253]

If I do build one I am thinking of a V tail Quad which looks like a Tricopter but with an extra rear arm run with a KK2 controller.

[@leonbroekharst4724]

Super video. I have 1

[@mssippijim]

Not trying to be negative, because it looks very nice for the price, but here are a couple of things I see. If you can't at least adjust the pitch on the 3G modes (like the V977) a lot of people in this price market are going to have trouble controlling it in anything but 6G. I have a 977 and it is a great little helicopter, but the pitch rates and expo on even low rates 3G mode are very difficult. It's great for cruising around in 6G, which this looks like it would be as well. It's really too bad it isn't compatible with the XK X6 transmitter. This actually looks very similar the the Walkera Master CP. Some of the other small WLToys / XK models also look very similar...I wonder if WLtoys have negotiated some kind of deal, or just copied the designs. The tail motor on this looks just like the setup on the Master CP. If it is a copied Master CP with a brushless main motor, it should be great...but still needs programmable curves. It would probably be very nice if it can be run with the Deviation transmitter.

[@fyresg]

I think it is important to point out all the problems. :) If I'm not mistakened, certain versions of V977 allows pitch range to be adjusted. You can find videos of that on KZbin. I would guess that V950 supports this feature too. WLtoys and XK Innovations are rumored to belong to the same boss; WLtoys may have been too "toyish" so they spawned a new company, XK Innovations, to ditch the toy-grade image. I'm pretty sure they are trying to clone the Master CP but they aren't gonna do a complete clone because they want to keep the price low. Certain expensive features (programmable TX) have to go. Go to their high-end sister company, XK Innovations, for their Futaba-based rendition of V950. Time will tell.......

[@mssippijim]

Looks a lot like the old Walkera Master CP

[@marcoaurelioxaviermoreira4631]

Yes...I agree with you ! It is a great old project.....I own a 4 years old still flying Master CP.....Of course I've been replacing a lot of tail brushed motors. Tcheers

[@mssippijim]

I have one too. Mine needs a main shaft...vibrates a bit.

[@williamwilley7035]

Looks sweet

[@danielmoore7179]

Mine would take off for some reason all it did was tultand break

[@muttbone01]

Trainer/Intermediate helis have come a long way in the last 3-5 years, but it seems that "dual purpose" machines like this, an so many others, seem to try to build an inexpensive 3D machine, then add onto that with some sort of "beginner 6-axis" mechanism. Don't get me wrong, this is a great thing! But it seems like they have it backwards. I.e., if you have a poor trainer, but a decent 3 Axis machine, bad habits can occur. Should be that the "trainer/6-axis" part of a bird should be rock solid to give a proper foundation first an foremost. Always fundamentals first!

[@fyresg]

I don't think this is supposed to be a 3D heli. It has 3D mode, but that does not mean it is a capable 3D helicopter. This is good for beginners to try out acro mode (i.e., 3D mode) as it has the ability to toggle to 6G mode - useful for beginners to "bail out" in case of emergency. Supporting acro mode does not mean it is a good 3D heli. This thing needs good collective management. If not, the tail will not hold, and the beginner will pay for his mistake. Repairing this toy-grade heli is a pain.

[@sebydocky5080]

Harg XT30 connector :)

[@fyresg]

V950? No, it uses XT60.

[@petertothRC-FPV]

it is surely borken.waiting for xk model.i have the v977-v1 & v2 very good to learn with.same tx 931,966,977.

[@allame3659]

from whir yuo bue it

[@fungusfoong9080]

It's a fragile heli. Even minor crash will result in parts needing replacement, especially the rotor assembly and linkages. Better order parts if u want this heli.

[@togimeow]

that's true for every heli that is this size or bigger though. most of us flying bigger helis spend lots of time practicing in simulators to avoid crashes :)

[@scottfirman]

You are getting ground effect from both directions, up and down. I wouldnt call it a fair evaluation at all. Its too BIG for indoor flying unless you have 30 foot ceilings. It is bigger than the 250 series and smaller than a 913. I may buy this as a beginner before flying my 450 Align. What do you think? I think its a much better choice than some other models.

[@fyresg]

Nope. I know how ground effect feels like, and it's out of it. I never fly within ground effect because it flies unstably. Experienced pilots will always get out of it asap, and only rely on it for landing. What did I evaluated and why was that unfair? A heli is only "too big" i.e. limited by space, if the pilot's skills are limited. Have you seen Nick Maxwell fly insane 3D inside his garage? Nobody would tell him his heli is too big for his garage. He clearly looked relaxed doing those crazy stunts in his tiny garage. If you are a beginner then you should skip this toy. It is fragile, and without skills, you will crash this thing and spend lots of time and money repairing it. As compared to my 450, V950 is definitely less stable. You are better off learning directly on your 450, or fire up your simulator. TBH, simulator was a huge help for me when I learn basics, as well as 3D moves.

[@scottfirman]

Fyre SG So you are saying that the ceiling doesnt affect the performance of a helicopter? Have you never stuck a drone to the ceiling in your house? Yes I have seen The garage performance. As far as flying the Align ,Figures you would say that, its not yours. I love it when guys goad their friends into smashing their RC all to hell, then laugh knowing its not theirs. Ok, I am not 12 years old, I wasnt born yesterday, and I am not stupid. Not everyone has the skill set to fly a heli in a garage without smacking something. Just because someone has that ability, doesnt mean everyone of us does. Clearly you must be an Ace flyer. Good for you. I think I will go at my own pace and avoid garages and parking structures. Have fun! Its a fun hobby, enjoy!

[@fyresg]

The ceiling sucking phenomenon only occurs when the model is very near the ceiling. The gap between the ceiling and the rotor is definitely much smaller than the gap between the ground and the rotor. Most importantly, that phenomenon is not called ground effect, because... it is the ceiling and not the ground. You simply don't redefine ground effect as "from both directions, up and down". Why are you harping on smashing helis and goading friends to smash their helis? Are you crazy? I have never advocated anyone to fly indoors, you made all that up! All that with just a clip of me flying indoors; seriously? I could do it safely and confidently, and you're telling me that my simple video implies I am encouraging people to follow? Seriously? Just in case you still don't get it - I'll put it in real simple terms for you: I do what I like. I do all that safely and confidently. I don't tell people what they should do. I never said you must fly indoors. If you don't wanna fly indoors, of course that is your call, but why can't I fly indoors and have fun? If you have the time, read your first comment again, and you'll understand why I am annoyed.

[@laurieclark577]

Hilarious to still see "borken" instead of "broken" on the blades - a spelling mistake that has persisted over a number of years on WLToys helis!

[@robertgaudet7407]

They fixed corter at least! :)

[@Youkoullele]

put fpv on it haha

[@fyresg]

Haha, no, I will crash! :)

[@weirdscience8341]

Youkoullele do it keep it in angle and don't try and land fpv should be fine I've done a few and always had fly aways due to non diversity fpv set ups and cheapo helos like v912 edit and my own fault for flying out of range of course

[@69gobain]

This heli seems to be hit and miss. 250 size heli with brushed tail, heavy lipo and like Fyre SG mentioned larger version of V977. V977 is not so good.I like XK K110 far better than V977. I better buy T-rex 250 FBL clone instead of V950.T-rex 250 clone has large parts availability and direct belt driven tail.

[@dunc5946]

I On

[@fananbeat7350]

Me in china

[@vandamnjaunclode9813]

i regred because i buy this heli new just keep drift if u have low power you will destroy the heli wltoys not good for heli only cars and quad

[@fyresg]

WLtoys did produce very good CP helicopters! For example, V922 and V977.

[@vandamnjaunclode9813]

Fyre SG maybe

[@fyresg]

Cool!

[@vandamnjaunclode9813]

Fyre SG thanks

[@serressnakehunterofgreece5133]

A very bad helicopter nobody must buy it !!! very cheep servos and slow reaction from Transmitter to Helicopter !!! 131.00 euros I have payed for this bad Heli !!!..It worked only 8 minutes and crashed allone witout order !!!