Woodworking: Woodoworking Mallet

[@lauriemacquanan2141]

Hammer time but I'm 2 yrs late!! I have never heard of Paduc wood so I will look that one up. Thanks for the video!

[@Brads-Woodshed]

Hammer Time!! I love working with walnut and I’d have to say it is my favorite wood. But that padauk is pretty sweet!

[@WolfRidgeWoodworking]

Thank you Brad! - Ed

[@donaldgendron3243]

Uūhammer malet - is fantastic. Walnut please.

[@bronsonguidry1744]

When dealing with oily woods, it's a good idea to use Tannin, if I'm saying that right. Now, I'm no expert, just seen it show up in some videos, not sure of the process, or the intricacies involved, but it's something I will try to keep in mind and research more when I get to using these types of woods. Great job on this build, much gratitude for you sharing this with us.

[@jaredtandle2596]

The flamenco guitar in the background is cool man.

[@user-hd4ef9gp7z]

Yes! I was just writing same thing, I'd love to know the key and actual scale they are playing, beautiful notes

[@milttaylor3898]

Nice job,. I am a new subscriber, really like the fact you use soothing music as a background makes it very easy to watch. I am going to make me a hammer..

[@WolfRidgeWoodworking]

Thank you! - Ed

[@lesliebloomfield6036]

Hi Ed, great hammer. I like the design and the way you made it. I was interested to see your nail gun does the same trick as mine, which is a similar make. Mine also won't fire the nails out sometimes. I found if i spray a little solvent in the head let it dry then use Graphite power on it then works fine. Thanks Les.

[@safirefight25]

Hammer Time!!! Nice work

[@ericklassen742]

Nice end result, Ed. I have a tip for you that may be of interest to you or to your viewers. RE: Securing the handle with wedges... Prior to cutting the kerfs that will take the wedges, drill an 1/8" hole where each kerf will stop. Now, when you drive in the wedges, any stress that might travel down the grain will be relieved by the 1/8" drill hole. Guaranteed!! WARNIING: When you cut the kerf, only cut into the 1/8" hole but do not nick the opposite side of the hole. That nick would encourage the stress to jump the gap and the advantage of the hole would be lost. Btw, I'm interested to know if any of the Paduak mallets are still available. Cheers and blessings to you and your channel viewers. e.k.

[@ConcreteLand]

So your tip is to do exactly what he did at 4:38 in the video? 🤣🤣🤣 you’re funny.

[@fryertuck6496]

Did you even watch the video?

[@andrewwatson9752]

Hammer time. Both mallets look amazing but I am always partial to walnut.

[@WolfRidgeWoodworking]

Thank you Andrew! - Ed

[@TheQuasiRedneck-vc7lh]

Hammer time! Great video!

[@justin_ray]

HammerTime Both hammers are beautiful but if I had to pick it would be the walnut.

[@WolfRidgeWoodworking]

Thank you Justin! - Ed

[@jonathaneglinton5378]

Hammer Time. I don't own anything with padauk in it, so my first choice would be the padauk and maple. Really enjoy the videos.

[@WolfRidgeWoodworking]

Thank you Jonathan! - Ed

[@Ken.norwood2]

I know it was a year ago but I have to try. Hammer time. Walnut.

[@Notforyou201]

HAMMER TIME! PADAUK Gorgeous… absolutely gorgeous. That takes a lot of work from the looks of it

[@timcoleman6403]

HAMMERTIME, new to the channel love what you are doing and the Walnut is the one I would like.

[@WolfRidgeWoodworking]

Thank you Tim! - Ed

[@user-um9yl9ll4u]

Hammer Time Walnut please. Thank you for a great video

[@WolfRidgeWoodworking]

Thank you for watching! - Ed

[@carbajalcustoms]

Very cool hammers. Hammer Time.

[@WolfRidgeWoodworking]

Thank you brother! - Ed

[@dondeere]

hammer time walnut you did a very nice job!!!!

[@WolfRidgeWoodworking]

Thank you! - Ed

[@MrLeugimmm]

Hammer time! The last one is perfect

[@towpathguitars]

Lots of adjustments on that nailer. The main thing is keep it warm, if it gets cold the drive pin won't fire the nail as the tolerances are off.

[@WolfRidgeWoodworking]

Thank you for watching! - Ed

[@ashleyreid8942]

Hammer time those look great if I could the padok hammer would be great

[@WolfRidgeWoodworking]

Thank you Ashley! - Ed

[@paulwaldrop]

Hammertime. Great job on these. Would like padouk, if I win. Love your channel.

[@WolfRidgeWoodworking]

Thank you Paul! - Ed

[@WARinMYhead1]

beautiful work!

[@marklineberry233]

Padauk! Both are awesome going to try make one!

[@WolfRidgeWoodworking]

Thank you! - Ed

[@lucasalati369]

Love the way you show working without being affected by the likes hunger. Thumb up for sure!

[@WolfRidgeWoodworking]

Thank you! - Ed

[@Highway69RusticDesigns]

Hammer Time! Like the design

[@WolfRidgeWoodworking]

Thank you John! - Ed

[@jimrosson6702]

Hammer time Walnut all the way. First time seeing one of your videos great job definitely going to check out more.🙏🏻🙏🏻🙏🏻 the mallets turned out amazing great job

[@TheWoodWerker]

🎶🎵Stop!...Hammer Time! I’ve never won anything before so EITHER would be a SURPRISE and a BLESSING!....but I DO like the Padauk one better Tho 🤩 Have A Super Week!.....Gus

[@WolfRidgeWoodworking]

Thank you Gus! - Ed

[@timsparks2688]

Really nice work,ur a good person

[@johngaskins582]

Best Mallett I've seen .... "Very well done", wood working brother.

[@WolfRidgeWoodworking]

Thank you very much John! - Ed

[@1960fusion]

Hammer time...walnut. great job, thanks for sharing!

[@donaldrobinson8892]

Awesome build!!

[@rickpouley2857]

Loving the walnut and maple... The Odies oil sure makes these mallets stand out and shine!

[@WolfRidgeWoodworking]

Thank you Rick and it makes them smell nice....for a little bit! - Ed

[@Tony-tp3zw]

Excellent mallet making, very good fit and finish, great job. Simple and elegant.

[@bloushark]

Well done I like the padouk

[@WolfRidgeWoodworking]

Thank you! - Ed

[@billhaga8710]

Hammertime! Love them both! Walnut is one of my favorite woods!

[@WolfRidgeWoodworking]

Thank you! - Ed

[@wf4516]

Hammer Time! They look fantastic but I have to say Walnut always stands out to me.

[@WolfRidgeWoodworking]

Thank you! - Ed

[@jasicjulien]

i want one!!! from Montreal!

[@user-lh3pz9dx4v]

I enjoy both videos

[@WolfRidgeWoodworking]

Thank you! - Ed

[@imb3rr]

Hammertime!! Walnut all the way!!

[@WolfRidgeWoodworking]

Thank you! - Ed

[@harryfarmer5477]

Hammer Time!! I think the walnut one would fit the decor of my shop the best, but either would be nice. Thank you!

[@WolfRidgeWoodworking]

Thank you Harry! - Ed

[@WoodenItBeNice]

Hi Ed, They both look amazing. Great video. I won't be entering as I have one that Andy from Andy's Cornish Creation made for me. Good luck to everyone who does enter. Take care mate. Cheers, Huw

[@WolfRidgeWoodworking]

Thank you so much Huw! I hope all is well with you. - Ed

[@christopherhurray6115]

Honestly, dear Ed, I have watched the first ten minutes in fast forward mode, because I am awake for more than 30 hours now and could fall asleep every minute. But I cannot sleep before having seen the final result of your newest Hammer Time and Hammertime and HammerTime project! Both look awesome, I cannot decide which one I like more. Please keep up the awesome work and I wish you a wonderful start into the week!

[@WolfRidgeWoodworking]

Thank you Christopher! - Ed

[@kevinwilson5363]

Hammer Time!!! Paduke is amazing looking.

[@WolfRidgeWoodworking]

Thank you! - Ed

[@coincollector1920]

Lovely! ....Hammer Time! ....both gorgeous but walnut ...just 👍

[@WolfRidgeWoodworking]

Thank you! - Ed

[@jasonmillette3134]

Hammer time. 😂. Just wanted to say that. Hell if it’s still an option Id be all over that walnut mallet. Nice work. Wouldn’t mind a mallet from another woodworker. Currently I make mine with the striking head 1 solid piece of wood by chiseling the mortis for the handle an adding the pretty face after. I enjoyed watching.

[@rickchapman3051]

Hammer time loved the paduk

[@WolfRidgeWoodworking]

Thank you Rick! - Ed

[@skategemz]

Hammer time! Walnut

[@WolfRidgeWoodworking]

Thank you for watching! - Ed

[@chrislewin19]

Mallet time..great video, love the Padauk wood. Very well done!

[@mikebraden9756]

Hammer Time! Both mallets are beautiful, the walnut is my favorite

[@WolfRidgeWoodworking]

Thank you Mike! - Ed

[@user-dj1io8li7o]

Gamer time padauk. Awesome video

[@boxtruckjerm8509]

Hammer Time

[@timfry4379]

They look great! It’s Hammer Time! The paduke is my favorite color one.

[@WolfRidgeWoodworking]

Thank you Tim! Congratulations on being picked as the winner. Please email me your address and I'll get this shipped out to you. - Ed

[@walshjp17]

Well done, Ed. Hammer time. Prefer Padauk.

[@WolfRidgeWoodworking]

Thank you John! - Ed

[@ernestoeide6384]

Hammer time...any of them lol I know it's late but i love this video.

[@philipcrawford68]

Nice job. I like the handle layout. I’m thinking of using the method for my handle tops, I have a job site table saw and was trying to figure out a way to cut “shoulders” for the mallet head to joint together.

[@WolfRidgeWoodworking]

Thank you! - Ed

[@rageshraghav1094]

Supper work👍👍

[@teomanoruc1078]

Hammer Time. They both look awesome but my favorite is walnut.

[@WolfRidgeWoodworking]

Thank you! - Ed

[@MrEddiewheeler]

Hammer time! Great job sir. Padauk is my favorite but would take either.

[@jarmstrong2843]

Nice mallets, Ed! Great Hammer Time give away. I’d be happy with either one.

[@WolfRidgeWoodworking]

Thank you John! - Ed

[@edwardlukasek32]

Hammer time. You are a born teacher who did awesome job with your video. Both hammers are beautiful. Thanks for the time you took to help us wood workers

[@CurlysCruisers]

I think MC Hammer wouild have loved to have one of these when he was performing ""Hammer Time". Especially the Paduk one.

[@WolfRidgeWoodworking]

Ha ha....Thank you so much! - Ed

[@dominicrusso6758]

Hammer time!! Paduak is beautiful! Great video!

[@JordanWoodwerx]

Beautiful mallets Ed, well done video as always brother! I like the padauk one! “It’s hammer time”! 👍🏻👍🏻

[@WolfRidgeWoodworking]

Thank you Bruce! - Ed

[@AndysCornishCreations]

Hi Ed... Really beautiful mallets and well made... I like them both but as we can't get Walnut easily in the UK. Then that would be my choice... Hammer Time ... !! Entertaining video as always... Take care...All the best.....Andy

[@WolfRidgeWoodworking]

Thank you Andy! - Ed

[@LittleCabin]

Nice looking! Thanks for the video -- thinking of using some scrap red oak I have to make one. Just subscribed!

[@WolfRidgeWoodworking]

Thank you and welcome aboard! - Ed

[@jeffwebb7423]

Hammer time walnut awesome work sir

[@stevelackscheide8307]

Another nice video, Ed! Been watching you for a long time, haven't seen one I've not enjoyed. I believe it is Hammer Time. Thanks.

[@WolfRidgeWoodworking]

Thank you Steve! - Ed

[@iteotwawkiaiff8948]

Wow! Very nice!

[@WolfRidgeWoodworking]

Thank you! - Ed

[@dtork47]

Hammer time for sure. I like the Padua although both very nicely done!

[@WolfRidgeWoodworking]

Thank you! - Ed

[@AnthonySchelin]

A very fun Hammer Time , that Padauk is beautiful

[@WolfRidgeWoodworking]

Thank you Anthony! - Ed

[@bobcade1002]

Hammer Time! Walnut! Nice job, good video. Thanks.

[@WolfRidgeWoodworking]

Thank you Bob! - Ed

[@williamellis8993]

Those both look great, Ed. And now it's HAMMER TIME! I'm torn which one I like best but I think I prefer the walnut. Take care. Bill

[@WolfRidgeWoodworking]

Thank you Bill! - Ed

[@gloriacostello8553]

Hammer time! Love them both.

[@WolfRidgeWoodworking]

Thank you! - Ed

[@jackthompson5092]

Beautiful mallets.

[@jackthompson5092]

Hammer time.

[@WolfRidgeWoodworking]

Thank you Jack! - Ed

[@night2beupzip]

Ed, Hammer time. I love both hammers. These hammers are as beautiful as they are functional. However, I plan to turn the handle on my lathe with groves for improved grip, while using your same attachment method at the hammer. Thanks!

[@WolfRidgeWoodworking]

Thank you! Turning on the lathe is a great idea. Check out my latest video where I make a carving mallet out of left over resin. I also turn the handle on the lathe. - Ed

[@eddiebourquin8467]

12/24/2023 Hammer Time.. Love the walnut and learned a lot from your video. Thank you

[@WolfRidgeWoodworking]

Thank you! - Ed

[@cwradio4571]

If you plan in making another set of hammers , I would like to purchase one.

[@WolfRidgeWoodworking]

Thank you for watching! I'm actually working on a hammer that I can make with the CNC. I want to show an alternative way to build them. Keep an eye on my website as I will sell them there. - Ed

[@gregoranda4220]

Hammertime! I like them both, but paduke is 1 of my favorite Woods.

[@WolfRidgeWoodworking]

Thank you Gregor! - Ed

[@agapitoramos-cx8zq]

Hi ed,hts one beautiful mallet. Gret job, im going to try to make one, but i doubt tha t it come out s nice as yours

[@ACKSWOODPASTE]

As far as finishes, you could also use Acks wood paste wax with carnuba for a little harder finish then just oils, Nice looking mallets. I would like to buy one for myself.

[@WolfRidgeWoodworking]

Thank you Tom! - Ed

[@dennisrood1469]

Those mallets are gorgeous outstanding work. Either one would be an honor

[@WolfRidgeWoodworking]

Thank you Dennis! - Ed

[@littledreamer468]

Hammer time! Walnut please. Great detail, great video!

[@WolfRidgeWoodworking]

Thank you for watching! - Ed

[@dennishuston320]

Very Nice Work. "Hammer Time". I enjoy watching all of your videos. I would prefer the padauk, but both are beautiful. Thanks Ed!

[@WolfRidgeWoodworking]

Thank you Dennis! - Ed

[@kunkprime6980]

Good Work !

[@scotthergert8877]

Hammer time. I like the paduk. I might take a swing at my own. Pun intended.

[@WolfRidgeWoodworking]

Thank you Scott! They are a lot of fun to make. - Ed

[@jasonmontgomery8180]

"Hammer Time" I like them both, but Padauk/Maple would be my pick. Great video.

[@WolfRidgeWoodworking]

Thank you! - Ed

[@Matt34677]

Hammertime! I'd take either but the Walnut would be my first pick. Really enjoyed the video! I've been looking at making one of these myself. Thanks for the work!

[@WolfRidgeWoodworking]

Thank you! - Ed

[@vernsteinbrecker3759]

Nice job, they look great. Look to nice to use. Hammer Time, either one, they both look awesome

[@WolfRidgeWoodworking]

Thank you Vern! - Ed

[@dondeere]

hammer time walnut great job

[@bloushark]

Hammer time

[@petermckeown1446]

Cool mallets brilliant video

[@user-ce5hz9ox1t]

Great video, all new to me. I liked your choice of wood I like walnut and use it in my projects.

[@RajendraKumar-uw1uh]

Nice BgM, I got lot of lesson from you. Thank you.

[@lawrencelunsford6028]

Nice mallets Ed, it's definitely Hammer Time! Good wood choices, I'd be honored to have either one. I enjoy your videos.

[@WolfRidgeWoodworking]

Thank you Lawrence! - Ed

[@thomasboard2836]

Hammer Time ,, Great looking work you do my friend . Would be proud to have either one in my shop . Keep up the good work , ED .

[@WolfRidgeWoodworking]

Thank you Thomas! - Ed

[@trueitbycjtruitt9546]

Hammer Time 🎉 they are both beautiful I like the P/M one 😊 you did a Amazing job 👊😁🤙

[@WolfRidgeWoodworking]

Thank you very much! - Ed

[@sandynorman700]

Hammer Time I Would like to win one of those Mallets I liked the second the best. They are beautiful!!!!

[@daveporter2555]

Hey Ed, both look great. Either one would make a great addition to anyone's shop. Hammer time. 👍.

[@WolfRidgeWoodworking]

Thank you Dave! - Ed