Wood Burning Kits to Avoid

There are a lot of options on amazon for buying a beginners wood burning kit. Here are a couple to avoid. The kits that offer 50+ or 80+ pieces are usually cheap and filled with stuff you don’t need. I’m going show you two of those kits in this video and exactly what’s inside.
In my opinion, you’re better off getting a high quality kit from brands that care about the end user even though there may be fewer pieces.
----------------
Join me for exclusive content on Creative Fabrica! fans.creativefabrica.com/crea...
----------------
Affiliate Links:
Chandler Burner
amzn.to/34NsbIY
Walnut Hollow Versa Tool:
amzn.to/31BThAt
TRUArt Wood Burner:
truart.co/?ref=4
----------------
Wood Burning Projects for Beginners - 19 Easy to Burn Step-by-Step Guide
amzn.to/36E7bnR
More Videos to Watch:
Learn How to Wood Burn in 5 Minutes • Learn How to Wood Burn...
Walnut Hollow Versa Tool • Wood Burned Projects ...
TRUArt Wood Burning Kit • Wood Burning for Begin...
Online Wood Burning Classes?
Imagine being able to make the perfect sign to put over your fireplace. Or being able to make a unique and thoughtful gift for that person who is impossible to buy for. Get Started Today!
www.pyrocrafters.com/wood-bur...
Want more Pyrocrafters Videos? Check out these playlists:
Tutorials: • Best Woods for Wood Bu...
Wood Burning Compilation: • Wood Burning Compilati...
Wood Burning Art Experiments: • Wood Burning Technique...
Catch our Podcast, Dare To Make It: www.daretomakeit.com
Follow Pyrocrafters:
Instagram: pyrocrafter...
Facebook: / pyrocrafters
Pinterest: / woodburn
Website: www.pyrocrafters.com/
Need Pyrography Supplies? Check out my amazon product page filled with all the products I use: www.amazon.com/shop/pyrocrafters
-------------
#woodburning #pyrography #pyrocrafters
Get the Pyrocrafters Set Gear!
Blue Yeti Microphone: amzn.to/37m5oHR
Lapel Mic: amzn.to/3oWxG1u
Studio Lights: amzn.to/2K7pkFs
Tripod: amzn.to/3qTMhwi
Overhead Tripod: amzn.to/3nn3Liz
Want 15% OFF Starbond Glue? Yes, Please!
Starbond Website www.starbond.com/?rfsn=480858...
PROMO CODE: PYROCRAFTERS15
Affiliate:
I’m required to state that I'm a part of affiliate programs for Truart, Amazon and Starbond - AKA - I make a bit of $$ when you click on those links in my video descriptions. It costs you nothing, and helps me create more art. :) #pyrocrafters #woodburning

[@DeboraExum]

I received my super cheap wood burner as a Christmas gift. The number of items (there were a lot) in the package didn't matter, and with no knowledge of wood burners at all, it was a good way to at least find out if I had any interest in the hobby. Mine is like the one you showed with a plastic dial. It gets hot and it burns just fine. I won't be surprised if it stops working or if the tips break. I'm okay with that. It was enough to be able to try it and find out that I LOVE wood burning. It is so much fun! Had I (or the person who gave me the gift) known who the players were in the community, I would have definitely bought from them and will share that should anyone ask me about burning. I'm sure I will upgrade to something better in the future, but for now my no name, cheaply made, mass produced wood burner is serving its purpose in introducing me to the joy of burning.

[@AliWade1971]

#Truth I also asked for one of the cheap Amazon kits for my birthday, and my elder sister bought me one. It is great. No, I don't use a lot of the contents, but have enjoyed experimenting with a few different projects. I would like to upgrade this year, but for now it is fun to use. (BTW - mine does have a brand name on it, and is better made than the one you are using, ie the dial works well.)

[@Pyrocrafters]

It definitely works for a beginner to try burning. And it’s not the end of the world to start with one of these kits. This video was meant to inform those researching what to purchase so they know what they are getting. Several people have messaged me for my opinion on these, so I put together a video about them. For a beginner, it’s enticing to get all those pieces, but there are better kits to buy.

[@N.K.N.503]

Way to say what we are all thinking! And it's #1! You said it a lot nicer by far.

[@thesun-N-moon8885]

So did you upgrade and if so to what burning kit?!

[@DeboraExum]

@@thesun-N-moon8885 Yes, I have a Colwood Super Pro II. It took some time to get to know it, and now that I do, I love it.

[@joshballard2802]

I'm buying my wife a wood burner for Christmas and I am SO GLAD I WATCHED THIS!!! Extremely helpful! You saved me the agony of buying a cheapo Amazon kit with a lot of pieces I don't need. Going with the Chandler. THANK YOU!

[@Pyrocrafters]

You bet Josh!! I hope she enjoys burning! And if she really gets into it and wants to upgrade to a faster wire tip kit later, I've got a lot of equipment reviews here on the channel. Thanks for watching!

[@kreativemom387]

I am a newbie and I've been looking at these kits for awhile now, glad I found your video before I make a purchase I may have regretted. Thanks

[@Pyrocrafters]

You bet!

[@samuelmorrow4259]

I'm really glad you made this video I was just getting ready to buy a new kit off of Amazon now I know what to look for. Thank you

[@Pyrocrafters]

Yes! I’m so glad it was helpful!

[@crow9669]

Thank you for this! I've been looking at those kits - so glad I didn't waste my money!

[@Pyrocrafters]

You’re very welcome!

[@ritamcclure1601]

Thank you I am just starting out mainly wanting to do jewlery and small stuff but I learned alot from you and I thank you.

[@Pyrocrafters]

You are so welcome!

[@Early100]

Hi, great info, buyer beware I say - I’m in the U.K. I started out using a cheapo wood burner a couple of months ago, it wasn’t a “kit” as such although it does have a few different tips and stamps included, these burners are ok to have a go to see if it’s something that you’ll enjoy but honestly the wire tip machine that I just bought (2 days ago) is far superior, it’s so much smoother and lighter to use, I always found the “soldering style burners” are heavy to use and you need to press down into the wood (depends on what wood you use I suppose) even though I’m very new to wood burning the results I’ve had so far using the “Peter childs pyrography machine” have been much better quality than my original attempts - invest in a better machine guys, they’re so much fun.

[@louis-anthonymcdaniel946]

One of the first ones that I purchased earlier this year, was actually a soldering iron that had pyrography capabilities(got it from Lowe's). I did some fairly decent line art stuff with it. My next purchase was a $75(after tax) unbranded one that had a nice collection of mid thickness, wire, screw in nibs. Downside, NO info on what the nibs were called or even what they were used for. Thanks to a couple of your uploads(and some balsam wood that came with the kit), I figured it out. I'm actually still using it. I plan to upgrade to a Burn Master or something in that arena(probably the Burn Master, if just for the name only...🤣).

[@ginandbill1]

I’m very new beginner and was lucky enough to learn my lesson quick. Thanks

[@Pyrocrafters]

Glad it was helpful!

[@PatChilly65]

Thank you for this video. I only found this after I had made a purchase of one of these kits. I will invest in a better one as have some ideas for gifts.

[@Pyrocrafters]

And it’s not a total loss to have one of these. I have three! Lol! You’ll still be able to burn for a while, get practice and learn about burning. When you get ready to upgrade, take a look at the wire tip kits. It will really speed up the wood burning process.

[@tunguskalumberjack9987]

Thanks so much for the info- I got my first tool today from Michael’s craft and art store, and (luckily) it’s a Walnut Hollow one. It’s a very basic kit, with four tips, a decent metal stand, and a tool with the cord and on/off switch. It was about $16, and looked like exactly what I wanted. I plan on not using any premade stencils, as I draw my own and intend to freehand as much as I can. I make medieval/Viking style axes, spears, etc, and I decorate the wooden handles using a Dremel type tool and then painting into the grooves, sealing it with epoxy or superglue. Takes forever! I saw someone use a woodburner and it got the same effect so quickly and nicely, that I had to try it. I’m giving it a go tomorrow, and decided to check KZbin to see if the tool I got was any good, so I’m glad I found your channel! I’m going to subscribe and use your videos as I progress in my hobbying. Thanks again!

[@Pyrocrafters]

Thanks! Walnut hollow makes some great products! I’m glad you enjoyed the video and the channel. Can’t wait to see what you make.

[@flowerflower4587]

I got one from walnut hollow. It's same trash as all others. I think nits more for little kids. Does horrible job and also heats up

[@appleoneill5135]

This was very helpful. Thank you for the info x

[@Pyrocrafters]

Glad it was helpful!

[@shannonpeavoy135]

I got a chep one from Walmart it was $20 but for people just starting kits like these are really good I didn't want a super high inn one before I knew I was going to like it.

[@daphnehinds5581]

Hello neighbor. I saw you live in Pratville. We live in Jacksonville. I just bought my first wood burner. I am so glad I came across your channel. New subscriber!

[@Pyrocrafters]

Hey Daphne! That awesome! Congrats on getting a new burner and getting started with pyrography. :)

[@daphnehinds5581]

@@Pyrocrafters thank you so much! Loving your videos!

[@colleenmulrooney]

Really helpful and answered my questions a loud those million point packs!

[@Pyrocrafters]

Thanks Colleen! I"m glad it was helpful.

[@jeffreyschwarz3699]

I just bought a Weller 60-watt iron from a hardware store. I know the company from years ago and it had a good reputation. I just Googled the optimal wattage and Google responded 30 to 60 watts for wood burning while 60 is optimal. I'll try it out and see if it will stand up, hopefully.

[@DavidAlvarez-xy3mj]

Good advice 👍. Thanks

[@amandagoos1310]

I bought one kind of like that one but had a digital temperature control built in. I used it for a while, until I saw Amazon had the walnut hollow wood burner. I did not like the first one I got at all. The whole set up would not stay tight, the stencils were pretty crappy... I used it to practice and start to get better. I love my walnut hollow burner.

[@Pyrocrafters]

I agree. Walnut Hollow is much better. I think these would be okay for lite soldering, but it's terrible for wood burning. Thanks for watching!

[@floydspears5877]

Good info for new people, hopefully they see this before they buy.

[@Pyrocrafters]

Agreed. :)

[@mariashields6711]

I saw your video by accident. I'm a newbie and yes I confess I bought this same kit. I did try to use it but it got so hot that I couldn't hold the handle not even with a glove on. Thank God I saw your video because I still have time to return it and get my money back. I will be ordering the correct one. Live and learn. I normally always depend on the reviews.

[@Pyrocrafters]

That’s awesome!! Walnut Hollow, Truart or Chandler Tool are great options for the same price.

[@mariashields6711]

I received my new kit I can't wait to try it out.

[@mariashields6711]

I forgot to mention the one you recommended cost almost half price less in comparison to the nockoff brand I bought. 😅

[@dawnatherton5515]

Brilliant advice, thanks!

[@Pyrocrafters]

Thanks Dawn!

[@rhondalamkey1346]

I have the orange one that you showed. I have never down wood or I g before and. It going f to put money into something I may not like or be good at doing. So I thought I would start with a cheap kit. Tips how to use them for beginners would be helpful and think of us that can’t afford a good set to start off with

[@Steveorino123]

I think I figured these type of kits out. They are actually kits for soldering electronics overseas. My personal opinion is that there are numerous people that are “subcontractors” and do certain electronics assembly at home. They bring in the finished project where it’s checked over and then they are paid by the piece. It dawned on someone that the soldering iron supplies could be sold as wood burning tools. They package them up with various other items and sell them as hobby kits. That’s my two cents worth on the subject.

[@Pyrocrafters]

I agree!! When Amazon started letting overseas manufacturers sell directly to consumers, these types of products started popping up. It’s attractive because there are so many pieces for a small price. And it will get you by for wood burning, especially when you’re just getting started and want to see what it’s all about. There are a ton of hobby kits that are repurposed and sold like this now.

[@michaelguida448]

I carve wooden spoons and want to write names on the handles. Is it possible to wood burn names small enough to fit on the handle of a wooden spoon? If so what do you recommend for this. Thanks for any help with this and I just started watching your videos and find them very informative

[@Pyrocrafters]

Thanks Michael! And yes, if you have a fine point tip, it would be a great way to add some small details. Brass tip kits usually come with some type of fine point tip, but you may have to order a special one for the wire tips depending on which one you have. I recommend prepping your handles by sanding, then transferring a template to the handle and then using your fine point to burn it. Keep the heat low and go slow to get nice crisp edges. Thanks for watching!

[@SkitchBean_aka_Christine_E]

Thanks for the information. ❤❤❤

[@Pyrocrafters]

Any time!

[@cherylwilson8743]

Here in New Zealand we don't get much choice. The couple you showed are basically what we have available. I'm trying to find a wire tip but it's very difficult.

[@Pyrocrafters]

Yes, that’s such a bummer. I’ve talked to a few others from New Zealand with the same problem. Have you reached out to Colwood? I know they ship internationally.

[@cherylwilson8743]

@@Pyrocrafters No I haven't but I will, thanks.

[@dad_designer4949]

Should have found your video first before I purchased but probably I will use them just to get familiar with pyrography as newbie! And purchase hood one later

[@Pyrocrafters]

No worries. You can absolutely get started and get a good feel for burning. These kits aren't the end of the world horrible, it's just that there are better options, but you'll get a lot of use out of these. If you ever get ready to upgrade, a wire tip is a good option.

[@UR_Right24]

Can you use any old soldering iron and tip to wood burn or do you have to have a special kind? I have a soldering iron I use for soldering electronics like potentiometers for electric guitars. Will that work fine?

[@Pyrocrafters]

I'd have to see it to be sure, but it will probably work. Most of the kits like this will burn wood, they just don't last long because it's not made for it.

[@humberto5631]

Thank you for your video you did it great.

[@Pyrocrafters]

Thanks!

[@corystuard6251]

Just starting burning a few days ago. Go with colewood, I went with super pro 2 I think, should last a real long time.

[@Pyrocrafters]

Good choice!

[@thebosh7801]

can i ask, what's a "sodder" kit. new to wood burning and never heard of this.

[@cuppy3874]

I wanna get a relatively cheap one so I can try out wood burning and see if I like it (not terribly cheap) I don't want to spend a lot of money just to find out I hate wood burning. Maybe if I got really really into it or when I have more money I would get a better one. I'm new to this stuff and am trying to learn before I invest.

[@Pyrocrafters]

Sounds like a good plan! Thanks for watching.

[@user-rl4od9et7s]

Hi. Enjoyed your video. I am a begginer...so please tell me, is it safe (or doable) after burning, and spreading mineral oil, to use that wood as a boutcher for hot food ( meat)?

[@Pyrocrafters]

You can use a food safe oil or conditioner for butcher blocks, but I'm not sure about hot meat/food. I would read the label directions of any food safe oil you use and see what they recommend.

[@user-rl4od9et7s]

@@Pyrocrafters thank u very much

[@tonyaj713]

Newbie...ordered a 141 PC kit the other day, i like it to find out if it is something I want to pursue. Will the tips work with other burners should I upgrade later?

[@Pyrocrafters]

It depends on the wand type. The screw in tips will likely fit into another screw in tip kit, but they won’t fit into the wire tip wands.

[@tonyaj713]

@@Pyrocrafters thank you!!! I look forward to learning about pyrography and using a dremel.

[@rcgkreations]

Great tips

[@Pyrocrafters]

Glad you like them!

[@mrs.nostalgicrpg895]

Thank you for the suggestions! Just ordered the Walnut Hollow Wood Burner. 🪵

[@Pyrocrafters]

Good choice!

[@jeccap1]

I had to look through a lot of other kits because they said “soldering”. I figured if it was saying it was both they weren’t going to work well for what I want to do.

[@marcoantoniosalazarmatamor3014]

Is a Walnut Hollow Creative Versa-Tool a good tool? I got mine at a Hobby Lobby, was just itching to try and begin with this kind of art (at the moment I am writing calling myself a “beginner” is an insult to beginners).

[@Pyrocrafters]

It’s a good place to start, just know going in that it doesn’t get as hot as wire tips, so it’s a bit slow going. However, it will give you insight into the workings Pyrography. If you love it and want to upgrade, there are a lot of great wire tip options out there.

[@mdray3976]

What kit do you suggest?

[@aliengranpa]

Literally the first one you opened is the one I have!😂

[@Blueboy9055]

Very sound advice that will be so helpful for anyone starting out. 👍👍

[@Pyrocrafters]

Thanks BlueBoy!

[@Blueboy9055]

@@Pyrocrafters 👍

[@Iran-1955]

Thank you

[@Pyrocrafters]

At the end of the video, I show two kits in the same price that are good quality. The chandler kit and the walnut hollow kit. You can find links for both in the description below. Thanks!

[@davidtaylor4912]

I have the same one you are using, but the tips won't burn. How do I get it to burn?

[@Pyrocrafters]

Hey David, I’m not sure why it isn’t working for you. Are the tips screwed in all the way? Sometimes that will keep the tips from getting hot.

[@amybleile7736]

Hey there! I asked about burning on cherry wood a while back and you were sweet enough to email me a reply. Course I can't find the email now... It turned out great, even using the EXACT kit to avoid 😂 Your channel is so helpful! I have some spots to clean up but you have a vid for that too! Keep up the great work and thanks for the confidence boosts! I'll emai a shot to your reply

[@Pyrocrafters]

Yes! I'm so glad the vids were helpful. I can't wait to see your piece! And thank you, thank you, thank you for sending it to me :)

[@amybleile7736]

@@Pyrocrafters can I attach a picture here?

[@carving_knives]

What is the piece you grab at 14:30 ?

[@Pyrocrafters]

I have no idea what it is. 🤣🤣 I’ve seen that part in a few of these kits. These are really soldering irons that are marketed as wood burning kits, so my best guess is that piece is related to soldering. I’m not familiar with soldering at all, so I can’t be sure what it’s purpose is. But I do know it’s not for wood burning.

[@sapphireblu2910]

My first kit I brought from eBay a d it literally blew up in my hand and when I contacted the seller they wanted me to prove that it blew up by taking a video of it blowing up in my hand. The kit was very similar to the first one you showed

[@Pyrocrafters]

That really sucks!! And that’s why I tell people to avoid these things….and the sellers don’t care. I hope you’re okay!

[@briankadams66]

I am just starting out with my $10 kit, I'll invest a little more once I get more experience.

[@SewWhittle]

What about the Tekchic brand?

[@Pyrocrafters]

I would skip the Tekchic and get a Truart. I’ve never personally used Tekchic, but I’ve heard a LOT of complaints.

[@bernicehall5635]

How to join the member ship

[@Pyrocrafters]

Hey Bernice! Just go to this link and click "Become a Fan" Thanks! fans.creativefabrica.com/creators/aney-carver/

[@TheNibNerd]

I bought one of those Amazon kits and was so frustrated. I bought an Optima and haven't looked back.

[@Pyrocrafters]

Right! It's a waste. I finally got an Optima. Yay! I'll be doing a review soon. :)

[@dazzlingextremes389]

WISH SO BAD I HAD SEEN THIS BEFORE I ORDERED MINE... MINE IS JUST LIKE YOU SHOWED ON HERE ITS CHEAP THE TIPS WOBBLE SO BAD ONCE HOT AND THE HANDLE BURNS THE MESS OUT OF MY HAND!!! HATE IT!

[@medawson01]

I bought a kit from Amazon two days ago. I used it yesterday, and within 1/2 hour one of the tips broke off inside the heated barrel. I was attempting to unscrew it. Very disappointing.

[@Pyrocrafters]

Yes, that's why I don't recommend these kits. They may work for a while and get you by, but I've heard story after story after story about these types of wands breaking.

[@sofya4555]

I have purchased walnut versa tool from Amazon, it only worked 1 time Only Then it’s bot heating any more , where could be the problem please 🥺💔💔💔💔

[@sofya4555]

Not heating *

[@Pyrocrafters]

Hey Sofy, I would reach out to Walnut Hollow and see about a refund/warranty or if they can help troubleshoot.

[@Bubblestheghost]

I spent all day with a cheap amazon kit, and I am returning it tomorrow. Glad I watched this after the fact. 😂😂 Jk, great video!

[@mrslimz4148]

I just orderd this kit in morning

[@Pyrocrafters]

It will help you get started and if you like it, rock it! And if you want to upgrade in the future, wire tip kits are a good way to go.

[@mrslimz4148]

@@Pyrocrafters cheers dear and its my first time so didnt want to spend alot of money on it till i gwt familiar with it

[@casper1240]

Bought one of those awful cheap chinese ones it burnt out first time i used it ,im in the UK and now use a Peter Child's woodburner brilliant piece of kit

[@Pyrocrafters]

I've always wanted to test a Peter Child's burner, but I can't find one. I've heard great things.

[@casper1240]

there a bit more expensive now i paid £95 for mine

[@bigfoot4455]

I agree they suck for wood burning. But they do work for other things. For example I make stuff with a 3d pen they melt 3d Filament very good.

[@Pyrocrafters]

I agree, and such a great idea. I hadn't thought about 3D filament. I think it would be fine for melting stuff and even soldering, but it can't handle wood burning long term. Thanks for watching!

[@reneem9353]

Im confused because as a beginner, I think these are perfect to find out if you like it or are even good at it. As someone who has been burning even for a short period, I don't think you would be looking at these kits. I guess what Im saying is that I see this video as a total knock on buying a kit. I would much rather you do a video on telling me WHICH kits as a beginner to buy that doesnt cost anywhere near a hundred bucks because I personally don't want to spend that much on something I don't even know if I'll enjoy.

[@Pyrocrafters]

And that’s why I suggest good quality kits that are in the same price range (and sometimes less expensive) at the end of the video. Chandler and Walnut Hollow offer good quality machines at the same price. They also offer customer support. Many, many people have reached out to me and asked my opinion on these amazon kits, so here it is. They aren’t worth the money in my opinion. If a beginner has purchased one of these kits, it’s not the end of the world. It will still help them learn, but there are better alternatives for the same price.

[@reneem9353]

@@Pyrocrafters I see. Sorry I didn't make it thru to the end. I agree it's a good thing to have customer service and be able to get parts (for anything you buy). Those two points alone I find many people won't think about. I appreciate your reply so quickly!

[@user-mw7wm3br2h]

What about artskills

[@roseanngeib5550]

I'm pretty sure the brass are for burning and the others are soldering

[@TurbulentMystic]

The Walnut Hollow tool has been horrible for me. I bought it at JoAnn Fabric craft store. Pretty much was useless from the beginning. Barely burns wood.

[@celestialblade]

This is almost exactly like the one I got for Christmas😭😭

[@Pyrocrafters]

It’s all good. It will help you get started and pick up the basics. And if you decide to upgrade in the future, there are a lot of options out there.

[@frogsoda]

I've just looked at about a dozen of these kits On Amazon. And every single one of them was made in China. I didn't see a single written review on any of them. They were all checklist of review of build quality and different features. But nothing written.

[@whatworkedforme]

apart from your view that a branded kit, and the brands respecting the woodburning community, is the only way to go I didn't see anything wrong with the actual kit in use.. you actually said it burned fine????? I'm ok with brand loyalty if that's what people want but I'd like to see why they are no good. i.e. Do not keep a constant temp or do not get to temp quickly etc etc. i can see you do not like that temp dial as you fiddled with it mostly all the time but does it set the temp or not? As regards breaking the tips; how hard are you going to press down on these tips!!! I got a similar kit but with a n LCD display and 1 degree variability. it is still going strong as both a burner and soldering iron. Yes opinion matters but I want to see the reason for the opinions. I'd say get a cheap one (no real loss in monetary terms) and see if woodburning is for you; then buy a brand if it doesn't last.

[@Pyrocrafters]

Hey Alan, my main reason for not liking these kits is that they are bait for getting people to purchase unnecessary junk. 100 piece wood burning kit for $40 sounds like a good deal, but they are filled with crap that isn’t needed in wood burning. You can buy a better quality kit for the same price with more actual wood burning pieces in them that perform better long term. !!!!!!!! As for the functionality, it will get you by if you want an intro to wood burning. It’s not a huge loss when it breaks. My opinion on the low quality comes from message after message after message from people that have purchased these, had them break and want to know what else to buy as a replacement. This video is a direct response to those questions. Don’t buy this kit. Spend the exact same amount of money on a higher quality item. !!!!!!!! I’m not pressing down on these tips. I don’t use this product. I have better ones. This again is in response to others that have had issues with theirs breaking. !!!!!!!!! The point I’m making about the brand is a small one, but still worth mentioning. These are mass produced and sold direct from the manufacturer. As a consumer if you have one product that is poorly made, includes extra junk just to get a sale, and is sold by a company that won’t give you any support vs a product that is higher quality, offers customer support and has more tip options at the same price, wouldn’t you get the second option? !!!!!!!! My advice is and will always be to recommend a Walnut Hollow, Truart or Chandler tool over these. They cost the same. Having or using one these cheap Amazon kits isn’t the end of the world. We’re not talking about life altering choices here. But when someone asks what I think about these, my opinion remains the same. Skip it and buy a brand that actually thinks about the end user. !!!!!!!!! If you enjoy your tool and it works for you, then why does it matter what I think? I don’t like these and I’ll never recommend them, but I don’t need to prove anything to you, especially on your terms. I have my experiences and you have your experiences. If our perspectives don’t align, I’m 100% okay with that. !!!!!!!!

[@whatworkedforme]

@@Pyrocrafters I think my simple comment asking for specifics on why the one you had here didn't' work, has upset you if you felt the need to put 8 exclamation marks in 6 times. I'm sorry if I offended you. I'll leave it at that

[@MrBobWareham]

That is just a cheep China soldering iron with extra bits it cost about £5.00 and they are crap

[@SpeedFreak62]

What are you talking about...One has a brand name the other does not. they all do the same, the result comes from the user. what do you expect for so little money what I think is bad about all word burningssets is the rest that comes with it.

[@Pyrocrafters]

You’re entitled to your opinion as am I. These amazon kits are click bait; they offer tons of useless pieces for a low price just to get the sell. It’s better to spend the same amount of money on a brand that actually put some thought into the product. Which is why the brand names are higher quality in my eyes. The amazon kits will get you by for sure, and it’s not the end of the world if you have one; it still burns and it’s not a huge investment. But why waste money on a bunch of junk no one needs, when you can get a better quality machine with better pieces. And I’ve had soooo many people message me after their amazon burner breaks asking me which kit should they buy instead. This is my way of telling people that haven’t made a purchase yet, to just skip the amazon kits all together and go right to the better quality unit. That’s what I’m talking about.

[@mildredmassenberg8680]

Dollar tree

[@marcopell7821]

It was a cheap barrier to entry and they do list which parts they intend for soldering so it didnt bother me too much

[@Pyrocrafters]

Glad it worked for you

[@doitynoid2790]

Meh. Still works for me.

[@calebsmith2131]

The first burner is junk. Avoid it! The tip threads will become faulty.

[@charlenemock333]

A lot of people are disabled like me and on a fixed income, so we have to buy what we can afford.

[@Pyrocrafters]

Absolutely, and that’s why I suggested good quality kits in the same price range. Thanks for watching!

[@charlenemock333]

@@Pyrocrafters I didn't know they was in the same price range. I apologize for that.

[@Pyrocrafters]

No worries. Walnut hollow offers kits that range from $11-60 on Amazon. This is a good kit that cost the same as the ones in the video. amzn.to/3cybQgs And it’s not the end of the world to have one of these amazon kits. It will work long enough to get someone started in wood burning. But I hate to see people waste their money on these when there’s something better for the same price. Happy Burning!

[@charlenemock333]

@@Pyrocrafters thank you. 👍

[@charlenemock333]

@@Pyrocrafters thank you so much. 😁👍

[@jaepicaso]

So basically made in china

[@chrisevansgardenservicesjo8093]

Lol just buy a wire tip kit