Wood burning stove installation, detailed How to.

How to install a wood burning stove. more detail at www.idostuff.co.uk . A stove installation, in detail, answering many of the questions that get asked. For other answers try the link in the top comment, I've found the info in the Stovefitter's Manual very useful over the years.

[@idostuffcouk]

I've been getting many more questions in the comments, sorry I can't answer them all BUT, I can highly recommend the guides for self installers available at www.stovefitterswarehouse.co.uk. Go to the "Quick Guides & FAQ" section where there is loads of useful information including the "Stove fitter's Manual". If you are in the UK they also supply flue products and stoves that have been chosen/tested for quality and value, I'll be buying from them for my next install. I couldn't put together all the info they have compiled, it really is a valuable resource, well worth a look.

[@chriskoch9829]

At least you answer.

[@matthewwarrington6006]

Do you need to put in a liner? Or can you just use the chimney as is?

[@idostuffcouk]

@@matthewwarrington6006 You can fit a stove directly to a chimney if it is in good condition but you would need a metal register plate with access for sweeping. However a modern stove works much more efficiently with a liner, the extra draw you get with warmer flue gasses can make a big difference to how well the works.

[@jamesjeffery6139]

Bloody brilliant video, no fuss, no life story, just the facts, info and tips.

[@jacktrubshaw4576]

My friend enjoyed this so much that he watched it over 7 times in one sitting! Crazy times.

[@calparton637]

Wow, that sounds like it took a whole working day

[@jacktrubshaw4576]

@@calparton6372 hours actually

[@calparton637]

That's mental, Surely he must have been installing one himself?

[@jacktrubshaw4576]

@@calparton637 I don’t know, it was just reported to me that he’d watched it for 2 hours.

[@idostuffcouk]

@@jacktrubshaw4576 Hopefully he'll enjoy the prequel, kzbin.info/www/bejne/iJS5qX6noMh2g8Usi=j9TdRZJSQcTM2JnT, just as much. 😁

[@floydpitt7590]

From what I have found out (UK); ''Whenever you have a woodburning stove installed in a fireplace, you will have a plate above the stove blocking off the bottom of the chimney. The plate must be made of solid, non-combustible material. You may hear this plate referred to as a “Closure” or “Register” plate. Although these terms are often used interchangeably by some people, there is an important difference between them. A Register Plate should always be fitted whenever a stove vents DIRECTLY into the chimney (ie if the chimney is sound and there is NO flue liner connected directly to the stove or stove pipe). The purpose of this register plate is to ensure no fumes, especially Carbon Monoxide, escapes back into the room. The Register Plate must therefore be sealed around the edges and around the stove pipe. The Register Plate must also have an access hatch to enable the chimney to be swept. CLOSURE PLATE performs a different purpose. It is essentially cosmetic and can also reduce heat loss into a chimney which is lined with, for example, a stainless steel flexible flue liner. Because the stove is directly connected to the flue liner, the Closure Plate is not required to be tightly sealed in the same way as a Register Plate; it also does not need an access hatch for sweeping as this will take place either through the stove or, where fitted, through a removable sweeping plate on the stove pipe. If your chimney has been thoroughly swept before the flue liner was installed, there should be minimal soot deposits collected over time on the top of it''.

[@seiseragaki5777]

This fire pit is one of a few covered pits that is on the list kzbin.infoUgkxAU9pOCSV9Y5JprooHvfxTpOrt4hx8uRM of approved products for Disney Fort Wilderness. The product served its purpose well and provided excellent fires throughout the evening. We were able to open the door and do s'mores, but I had to be careful because the handle was a bit hot on occasions. Additionally, I wish they had replaced some of the standard nuts with lock nuts in some places. We lost the door handle after just a couple of days of usage. Not a deal breaker, just a recommendation. I still give it 5 stars.

[@drummonddrew]

For 16 minutes long you kept my attention, mate. Best how to do vid I have seen on You Tube!

[@idostuffcouk]

Thanks

[@eadigwe]

second that!

[@spurii4334]

I totally agree. Exceptionally brilliant! Loved every minute of it.

[@andrewcorry2251]

Just to say if a brick did fall on steel it would leave a massive dent as it doesn't need to be any thicker than 2mm . Most use the lighter stuff anyways. Cement board is just as good

[@FastEddieQ]

Excellent video, keep up the good work and cheers from Waukesha Wisconsin USA

[@jonathanleach4077]

I'm not alone here by saying you have a fantastic style and pace to your video. Top marks top marks. 👌🏼 Thank you Jono

[@jamesryan6392]

Hi, first time I have felt the need to leave a comment on youtube! I found this really helpful and appreciate the time put into it, thanks, Jimmy

[@idostuffcouk]

Thanks Jimmy.

[@tanisbabe1]

My husband is fitting his now, your video was of immense use, he's a builder, and has built many a fireplace in the past, and he watched it all the way through, even telling me to shush, which i may add is pretty significan,t, , as you answered a few questions , ie, the register plate, and the tip on cutting the pipe, and also , to fianly the use of silicone as a filler , he was most impressed. Would reccomend anyone to watch your video, extremely helpful, many thanks.

[@idostuffcouk]

+lindy cole . Thanks, It's good to know people are findng it useful.

[@Barouche]

It's been really nice to watch someone who's confident about what he is doing. Thank you for an excellent and swift demonstration.

[@Gabion6]

Here watching myself and I agree 👍

[@omugz9444]

2.17am UK time, the best enjoyable video i have watched in a long time, commentary was awesome, as another comment posted, you also kept me intrigued the entire video. I shall have a look at your other videos, well made video, no nonsense, yet brilliant camera work, very educational and formative. Thank you for your efforts.

[@donjack6924]

I loved your laid back narration! excellent and very informative video, thank you.

[@brendanmctaggart8038]

Just like to say thanks for putting video up. This saved me a small fortune as people wanted to charge the earth to do it for me. Took me a few hours but got it done. Thanks again. 👍

[@T3mporayVi3w]

Agreed. Best how to on KZbin. The headcam helped, as it gave us a 'fitters-eye-view' of the process, with all the 'boring' bits chopped out. KZbinrs could learn a lot from this. 5 Star video as it gives me a lot of confidence to fit my own.

[@davidfalat4377]

I watch alot of videos on KZbin , very rare I comment. This guy deserves one.. great video mate.

[@calvancandy8384]

A brilliant video. You explained exactly how to do it effectively in a very clean way. Thanks for the tutorial I appreciate this.

[@bottletree33]

iDoStuff, I've been using your videos to help me install my own stove. I've had to learn bricklaying and plaster-boarding along the way also. I used the hardie backer for the inside of the fireplace and also used it for the closure plate as many of my bricks were untidy. Will get the local building regs to sign it off. Thanks for a thoroughly enjoyable video and helpful hints. You gave me the confidence to start this project.

[@idostuffcouk]

Cheers Shane

[@keithmitchelson1887]

Just brilliant. I'm just about to connect up the flue liner and thought I'd check it out on You Tube. Really confident now. That idea to use a cement board instead of a metal plate is something I'll use in future.Thanks

[@tablighibayans]

Fantastic vid. Great sense of humour and a lovely laid back, easy going approach. God bless ya mate

[@YouTubeIsAssHo]

Excellent tutorial! I have no intention of attempting this myself (being shit at DIY) but it's nice to see how it's done for when I get in a professional. Thanks for sharing.

[@59kabb]

Agreed the best no BS no special effects just straight forward advice. No sales pitch crap

[@MrMagsimus]

What a fantastic no nonsense video , thanks pal you are a diamond 💎, thanks for sharing all your information, you have given many diy ers confidence 👍

[@maggie642]

Excellent instructions,clear & knowlegable. Thank-you !

[@eds.farm_life8772]

wow was not sure to begin with if it was going to be useful but answered all my questions and now i can install my fire no problem . thanks for a great video

[@Jake13080]

As we seem to be late to the party, as in having a log burner in the house, what a great video. , thank you

[@idostuffcouk]

No worries!

[@davidshaw9047]

A really good video. Down to earth no frills explanation. Well done and thanks

[@murphyslaw580]

What a show buddy! Clear instruction, via explanation & demonstration. Just what I'm used to from my time in the services. Thanks very much!! God bless you and keep up the good work.

[@privacy3116]

This is so clear and informative. You held my attention, the video is spot on. We'll done,thanks a million, great job @

[@davidriley8590]

Excellent tuition sir, easy to understand and enjoyable. thank you.

[@m1geo]

Great video! Clear and concise, well presented, through, and a professional finish. 10 out of 10.

[@davidnoelwinder8368]

I agree What a refreshing change to hear an English voice that’s easy on the ear

[@frenchiedekent8572]

Very interesting, nice job. I am totally in love with my log burner. I can cook with, keeps me warm, better than a tv and doesn't argue 😆

[@tigertruckerman]

Another self centred woman, whatever next

[@captainkirk3612]

What a very good, informative video, you have given me the confidence to tackle the job on my own.

[@euangreer]

Absolutely fantastic video he talks to you not like a smartass and shows how it is achievable for anyone

[@RaNdOm-GrAmMaR]

Hayup just bought a standard sized Potbelly stove from machine mart for mi shed and what you put in your vid has helped tons thank you!😁

[@susanhouston4605]

brilliant video, really easy to understand, covered everything we needed to know

[@Jmf1190]

Great job, that is not an easy install!! I’ve been learning the trade for a year now and I’m loving it. I like to watch these videos as everyone has their own little ways of doing things. Nice to get a few tips thank you

[@steveindorset]

What a great video. I was thinking about getting it fitted but I'm now thinking I'm going to do it myself if it's that easy! Nice one "Cheers"

[@mchgyle]

This is simply the best and most through video of any diy project effort I've ever seen. I am currently in the process of converting/renovation a whole 3 bed house on my own, Well done you and thanks.

[@andrewwilliamson5467]

mchgyle . Me too. Can’t believe how long it’s taking. Soul destroying on your own. 😩 Great video it’s on my list of jobs to do. 👍

[@francisbarnett]

Looks a decent job. Love your work.

[@idostuffcouk]

Francis Barnett Thanks Francis, I had a quick look at your channel, some fascinating stuff you get up to. I think I'll be back for more of the timber framing at some point.

[@timmah4476]

This is a brilliant how to video! Really helpful for me starting out on this project!! Thanks for creating and sharing ✨👌🏼✨

[@adamridsdale1392]

Very informative and helpful. Will be referring to this when I install mine.

[@leecifur1]

It's been a big help, thanks for posting this

[@cemmusabak]

It is clear and concise. Very useful. Many thanks.

[@rosendo3523]

Really great vid - I feel ready and confident to have a go! Thanks

[@TheEmadia]

Well-made and informative video. Thank you very much!

[@petef7323]

Absolutely brilliant no nonsense tutorial. 👏 👏👏

[@jamesmurphy1389]

Terrific stuff. very helpful. Great workmanship, Thanks.

[@StevenWJRichards]

Good how-to video, very clear instruction. Thank you.

[@chrismcandrew1041]

This video is very well executed. Good camera work and narrative. Calm as a cucumber. 11/10

[@idostuffcouk]

Cheers Chris

[@gtgodbear6320]

That's a great idea using the existing system on so many levels. If I can find me a nice old-fashioned wood burner I would get one.

[@garynash7197]

An excellent informative and interesting video, thanks it answered many of my questions....

[@wfcwfc1]

Great video I am now going to give it a go myself thanks to you,very helpful

[@alangranaghan9418]

thankyou for a great video i have just become a registered hetas fitter for multifuel and log burning appliances and love learning tricks of the trade cheers

[@MrSmoothasf]

This looks easier fair play good video. I want to Install one in my garage and this has helped loads

[@wilsoncloukey4485]

Sir you are a true professional!

[@meganvallejo18]

Super super helpful ! thanks so much the husband and I are looking into getting a wood fire in out first home

[@shirleyporter9025]

Excellent!!! everything I need to know to do it myself, thanks!!

[@damp6789]

Great video, held my attention all the way.👍

[@martinjeffrey8364]

Great advice installed it on my own after watching this video.👍

[@JohnMartin-oh6bf]

What an easy going man.superb instructional.

[@idostuffcouk]

Thanks

[@phill3144]

Loved the video, learnt something from the comment section to, you don't have and support installed like in your damage test, the board will fail if a brick hit from high enough with no support to dampen to impact. Still a good video 😉

[@duffgen62]

That was great. I am about to tackle 2 chimneys in my home. Just hope I can complete it as well as you. Thanks.

[@peterfitzpatrick7032]

I have this job coming up soon so this vid is a great tutorial... thanks , man !! 😎👍☘🍺

[@stevenmacgregor5506]

Kept me glued very helpful thanks .🏴󠁧󠁢󠁥󠁮󠁧󠁿

[@aerialskyservices6991]

Fantastic informative video I am installing one of these myself at home and all your tips are fantastic

[@theunvaccinator]

what a great video well explained with some great advice Thank you

[@brendanmcdaid8514]

Great video so well explained. Gonna give it go myself and save a small fortune 😊

[@cliffordmcdonagh6458]

thanks having a go at fitting one myself. video very helpful

[@rebeccahalbeisen6681]

Excellent video, very informative. Thanks very much.

[@joe23.]

very good video , top class and well done 10 out of 10 , learned a few things also 👍🏻

[@bigb147]

Superb video. Easy to follow and had my full attention........ 👌🏻👍🏻

[@vazza7504]

Great video buddy. Very professional job. 😊

[@petermainwaringsx]

Excellent video. Thank you.

[@wallingtonfilming]

Very good video mate one of the best I’ve seen mate🕯☕️🚬

[@davidjensen4976]

Very good and instructive video. Thank you mate

[@ljd8520]

Great video, very well presented. cheers

[@camofpv]

Can’t thank you enough. Cheers for that. Great video.

[@smilekite]

thanks, great video. I definitely have more of an idea of what to do!

[@spurii4334]

You sound like the guy from "Dead man's shoes"! Thought you were gonna waste some bad guys in your video! Awesome tutorial! 👊🏻🙂

[@albahereandnow]

😂😂😂

[@wezgil]

Craig Cash does stove fitting now!! 😂 Excellent video mate, I put the liner in yesterday, off out to get some cement board today.

[@chessfun]

great video, thanks for the upload

[@samanthab5149]

I just watched this whole video just because I like listening to you talk! Haha

[@pinocchiomediam5055]

Thank you . Very professional

[@thekitchenpro]

Top Vid, saved me money and time

[@bambam-cm8we]

I have just oped a fireplace up fo a customer, purely for aesthetics. Chatting with customer while we were doing it and the log burner was a possibility they would look into in the future. The drilling was also tricky, as you mentioned in the video. The specification for the opening made the drilling, let's say entertaining 🤣....you see the customer wants the aperture flush front to back on the sides and head (register plate), without the recessed area and.......set up in a way that it can be plastered in, and when the fire gets installed in a few years it can be done with no damage or mess. We constructed an aluminium support frame using 40mm x 40mm, x 3mm angle profile, sounds simple 😆 we had a laser level set up 10mm below the concrete lintel, pre drilled 1.2m length of angle section, 1st piece was the back and was easy and then the front piece lol, ah drill won't fit.....no worries ill swap the sds and use the combi drill on hammer action which is not as big..... nope, same problem 😆, right there is a short masonry bit in the tool box, with the combi drill...problem solved........🤣 .... nope, right thats it... time to embrace the caveman in me, grab the grinder, attach a slitting disc and proceed to whip off the shank that is round and designed for a Jacobs chuck all the way to the spiral and "encourage" the trusty combi to hold said doctored bit while spinning true and not wheebling and wobbling.....holes need to be drilled 15mm the lintels edge, no pressure 😂......hey Presto it fits, sorted 👌........NOPE 🤦 I mentioned previously the laser level line was set 10mm below lintel, this is where it started to resembled a chuckle brothers episode 🤣 I'm sat in the chimney facing into the room, my colleague is holding the angle in place, I cant see the line at all and when he is holding it he blocks the laser completely 🤣, and to top it all off...the drill bit i butchered to fit only made a witness scratch on the concrete before the chuck bottomed out ot the angle....this was hilarious and traumatic at the same time, with 6 holes in total to drill 🤣 we had to mark each hole and check level, remove angle and drill holes to depth, hold angle in place again, checking the laser level on each fixing because the holes were angled up slightly and pull the angle out of level.....smooth sailing after that, rivit angle struts between the rails and screw cement board to frame. The centre of board has a 6" square frame and pre cut panel secured in and can be cut out in the future for the flue installation.......well thats the plan atleast. I know I rambled on and commend you for getting this far 👍 hope you also get a chuckle out it, we certainly did 😉 😄

[@idostuffcouk]

Sounds like fun, you got there in the end with a bit of creativity. Hope your quote covered all the extra work. Could do with an angle drill with hammer action.

[@aqa321]

Great video. Really clear. Thanks

[@GB-ud5xp]

Best how to video on KZbin

[@petersimpson633]

Just in case you still keeping eye on this -thanks for very useful video

[@idostuffcouk]

Cheers, knocking on for 10 yrs but it's still relevant.

[@ridemgis]

Nicely done!

[@aquabilly]

hi, thanks for the vid. spot on and well presented.

[@cooking.with.rob.official]

Excellent video. Thank you

[@eoinmurphy1589]

i found that very helpful, thank you

[@garrystokoe2743]

Eoin Murphy

[@jordanbriatte9078]

Thanks for the video buddy, good work

[@jillianhorsley5985]

Excellent info, cheers.

[@tommurray3974]

Good instructive video. I did a very similar installation of a multifuel stove but find, from time to time, that I get some SO2 fumes when burning smokeless 'ovals'. I've tested for leaks using smoke bombs and also tried smoke around the air vent and air-wash vent when the fire is lit - the smoke was sucked into the stove therefore I assume I have some flue draft. The problem is, do I have enough? Meters to measure flue draft are expensive (especially if you're only going to use it once) and the method that seems to be used by 'professionals' in my area is to light some newspaper in the stove and if the flames go up the chimney then "that's O.K." A little SO2 goes a long way and I guess that a stove is not 100% gas tight but I'd still like to know how much draw I have from my flue.

[@spymo]

Great video cheers.

[@gordonmillar998]

Andy, Great video! no time wasting. You must be using that head Cam again. Works well. Your cottage must be nearly finished now.

[@idostuffcouk]

Gordon Millar HI Gordon. Yes I've updated now to Sony action camera, still getting used to pointing my head in the right direction not just my eyes. The cottage is at the final stages now. I've got loads of material to post, if only I didn't have a day job.

[@gordonmillar998]

iDoStuff Ah yes the day job is a bit of a pain :-))

[@colingraham2367]

Excellent tutorial 👌

[@leeyo5494]

very good video im off to find more of your stuff now, thanks

[@Im.in.ur.walls.xx22]

Cracking vid. Thank you