Wood Carving - Power Carving/ Engraving Demonstration

See how easy it is to engrave or carve just about anything. This demonstration is on how to carve a leaf pattern onto a wooden coin using power carving, high speed engraving equipment. We simply copy our pattern onto mylar stencil film, place the pattern onto the surface of our engraving project, then trace the lines right through the pattern paper. With high speed, power carving equipment, you won't even know the stencil film is there, See how you can engrave or carve almost any surface - by Profitable Hobbies.

[@LifeofBangladesh]

অনেক সুন্দর ডিজাইন হয়েছে।

[@adolfogomez5556]

Been doing woodwork for many years, enjoyed your artistry and to me if looks just like maple.

[@LaserGadgets]

Couldnt find a German video....darn shame, the land of handwork and tech of all kind. Thanks for the upload!

[@101_furniture]

this tool is so good ..i want to have one ..hope that is available in the market and not so expensive

[@henleyb56]

Could you provide a link to where we could buy template sheets and the tool?

[@lloydbannister8062]

Great carving the Mylar that you use do you have a link to it I found Mylar but I’m not sure if it’s the same stuff thank again keep make videos their awsome

[@rosaspepe]

Thank you for sharing...I really like our video but i think it was too close cause you can see the pixels!...also I have a dremel tool, would that be the same? I would like to show my son, who is 16, so that he help me do stuff over the summer vacations....thank you again...keep up with more videos

[@Sarahsvintagekitchen]

You can carve with a dremel but the maximum speed is about 1/10th of the tool used in the video. I've only just got mine so I haven't used it for a lot of picture engraving yet.

[@YouLaToya]

Have no idea how I ended up here and why. I have no interest whatsoever in wood carving nor do I think I ever will yet, I sat and watched the entire video... The things youtube leads you into. Good work regardless!

[@SLICKRICKDESIGNS]

Is the rotary tool that you are using faster than a dremel or about the same? I know the history of the dremel but is a dremel tool now a days just as fast as the one you are using? Your rotary tool sounds like it has a faster rpm.

[@fedrickharkrang6317]

wow beautiful work.so can u give us the website or shop to online these materials n especially electric mini drill for wood carving.

[@haraldpettersen3649]

Nice tool and nice video .

[@zahnyisrael1835]

Lovely. I am just attempting to learn this. Want to make a walking stick for my grandson and want to write his name and a few other things, like decorations, on the cane. I have a Dremel. I see that this is not a Dremel. Will the Dremel work. As a senior, my income is limited and do not think I can afford to purchase more tools. Thanks for this though. Best I have seen.

[@headlesmouse]

anywhere from 40-90 dollars depending on how many bits and accessories come with it. if you want a cordless one it will be 28-100 dollars depending on the bits and voltage. you can buy them at Sears, Home Depot, Lowes, Ace Hardware, and pretty much anywhere else that sells drills and tools.

[@tracydavis1688]

a huge branch just fell down in front of my house and some people came to cut the remainder of the tree. what they cut was left out front and there are hugh chunks of wood lol what way to make the best of this wood, than to create engravings? thank you for the channel!

[@mkuhnactual]

Which you can remedy with the flex attachment for the dremel. Gives you a wand for small detail work.

[@eastendbillythekid802]

Out standing work man very good video.

[@BlueLineofthesky]

I really enjoy this video. Can you please tell me what engraving bit are you using? Thank you.

[@JohnHumkey]

Great video (IMO), makes it look easy enough that even in my mechanically dis-inclined state . . . I could do it. One question, can you give a brand/type of the film? "Mylar stencil film" that is both printable and self adhesive . . . can't quite find any. (I've found adhesive and too thick, or non-adhesive and just right.) Or do you just print, then wet the back and it self adheres? Either way, thanks for the video.

[@RenzorTheRed]

I was trying to figure out how to do some artistic relief carving on a shotgun stock. Now I know. Thanks!

[@e9s42tv69mo]

WOW! I love how you brought that 3D image out of the wood surface. Great lines depicting leave texture and exceptional shaping of wood to indicate shadows. I would like to carve in this fashion, have a Dremel 300 but have not actually started yet; your video helps a lot as far as how to approach the wood shaping process. I do draw a lot and think it was pure visual poetry to see how your "lines" cutting into the wood, created this great little image! Thanks for this instructional info!

[@SimonMiriamfan]

This is also of interest to me but again - I need one for use in Britain. Do you have a model that will work here? Also - Price? video's great but what's he carving with????

[@bernardocaca8479]

Very nice 👍🏼

[@febbymerdias5475]

nice job 👍

[@sonjaschaeche7760]

Amazing to watch a leaf come to life

[@maaganm]

Hi mr. Russ Larsen . This is beautiful way for carving . Where do you get this stickers ? Can you tell me please . Thank you

[@critterlover4278]

I like your sense of humor : )

[@jenn5260]

I do crafts and looking for something to carve wood. Is that a Dremel tool you are carving with?

[@juztmayTv]

nice work.what brand and model of the engraver that ur using?tnku

[@KiKiJahDore]

Which one is he using in the video and what does a compressor do?

[@randomz4519]

Awesome vid

[@AbdulAziz-lu8fw]

Dr lew Thanks a lot. i appreciate that efforts👌☺🙏💝 Thanks again Aziz - Saudi Arabia☺

[@savagelife50]

what kind of machine is that and do I need to know about the different types of wood to use for jewelry

[@eduardoraulcabrera3867]

quisiera saber que marca es el equipo grabador y donde se consigue . Atte. los saluda Eduardo

[@Pentazemin]

Seguramente sea una dremel, y lo que usa es un accesorio llamado eje flexible, que se conecta a la dremel y transmite la fuerza a una especie de "lápiz" con el que poder trabajar con este tipo de trabajos que requieren mucha precisión.

[@Scorpion85629]

Nice coaster

[@josueguzman602]

Thats cool where can i buy one

[@deborahwheeler1776]

I have a SCM 400 which turns 400,000 RPM's. I have many burs but do not know what each one will do. I would like to have something that would help me know which bit to use on a particular cut.

[@guytribuzio119]

What kind of power carver do you have? And were can a get a decent one fora decent price?

[@SteffenFleck]

for this kind of detailed work a higher video resolution would be much more educational Pretty work !

[@haraldpettersen3649]

You should be there youself 👍

[@andrewdavid9597]

Russ Larsen i was just wondering if you know can the Dremel Engraver 290-1 can have the bits changed also i just received this today and first time using one ever and if so what shank size are these things i cannot find anything on the Dremel Engraver 290-1. Thanks in advanced. Nice job as well man...

[@lifewithmejessiemarie2570]

Ive never tried wood burning..really want to try it now!

[@seggammalavika9168]

what is the names of machiche that is in your hand.plzzz tell me..annd what is cost

[@jenierainey5401]

Is this a dental drill or a power carver

[@ryleefletschock5187]

You can't see it very good but that is super good!!!!!!

[@rosaspepe]

oh regarding my question...can I use my dremel tool? Please reply...thank you. I see some of those tips that you use to do the cutting, I have some of those and was wondering what tip did what kind of job. Ok thank you...

[@RussLarsen]

It's an air driven tool. It's not a dremel. Air tools turn about 10 times faster than the highest speed electric tools. The one in this video is a Turbo 300, another one is the NSK Presto.

[@tonireeder5820]

Guys if you wants to learn beginner to advance level woodworking my recommendation is BestWoodworking76.blogspot.com the best website to learn woodworking....

[@stevepeterson7035]

my brother recommended BestWoodworking32.blogspot.com for the best woodworking plans and I couldn't agree more after getting it. Tons of amazing projects and plans there.....

[@sunny015]

ɷɷ I Have Watched Thiss Movieeee Leakedddd Versionn Hereee : - t.co/RlKbv1hghK

[@gera6376]

Russ Larsen

[@johnsalley6583]

Moreover, you only need to stick to the comprehensive instruction and simplify the woodworking and building process to your dream woodworking, learn more here: WoodworkingPlanEeasy.blogspot.com

[@samahalove4029]

please tell me which bit are you use??

[@kaguilar9989]

Can it carve through to the other side?

[@jonwaters5278]

What type of Tracing paper are you using??

[@redsirens1]

what power tool are you using for the demonstration? it doesn't look like a dremel? I would like to get it.

[@hyf3043]

It's laser engraving machine We supply laser machine with good quality and very competitive price. E-catalog will be provided if needed. Email me or just call me directly. Thank you! [e-mail] Terry Wong

[@RussLarsen]

The handpieces vary in price. Profitable Hobbies offers three different types of high speed handpieces. The one in the video is the Turbo 300. You can get more information at Profitable Hobbies dot com.

[@RogueT-Rex8468]

This is inspirational! You said you used a Mylar stencil paper. Is there a specific size/width that it has to be? Pretty new to the term and not sure where to go.

[@MrDanylodude]

What tool is he using to carve in the beginning?

[@charleshines6155]

I know someone who does not like dental drills. They don't bother me but who can blame him? I am such a nice person I told him the interesting fact that these drills can run up to 400,000 RPM. There are some people who don't realize that but the fact is they run so fast for smooth cutting and minimal discomfort while the nice dentist takes his good old time slowly drilling down in there during a root canal treatment. I am not a dentist, I just like facts such as these.

[@chalo7292]

What kind of paper is that ? And where do you get your designs made in bulk like that ?

[@Normenian]

Where do you get the mylar stencil film? Do you have a link?

[@headlesmouse]

where can i get some stencil designs not the paper but a design to get me going

[@marianaselva9365]

hi, i´m portuguese and i wonder where do you buy that intrument? tecnical name? and the price. thank you

[@DrLewJensen]

Sorry for not getting back to you sooner. I am playing... the name is ParaGraving - Distributed by Profitable Hobbies.com. There are "several" handpieces out now - but don't be fooled by the price. This is by far the "best" and retails at $575 US. Our "kits" include the drill at a discount. I don't think we have anything in your country. Could you "distribute" over there for us...? BONUS VIDEO - AIMING YOUR LIFE kzbin.info/www/bejne/qmW7pWqrpqqZiNk STEP ONE... kzbin.info/www/bejne/jIvOlqCLn9Onf68

[@shakuntala_71]

Just fantastic

[@LCIOchouno]

If you dont mind me asking ive been trying to get a rotary tool and id like to know what tool are you using? Thank you

[@cedarroof75]

Great project! Nice work :)

[@akshaysharma9631]

@Russ Larsen what wood do you use for engraving?

[@samhaidemenos]

What is the stencil film and where can I buy it? can't seem to find a self-adhesive one in the UK

[@DrLewJensen]

Sam... go to ProfitableHobbies.com/store. They have it there. It is hard to find - and it needs to be "adhesive" on one side and photocopier sensitive on the other. This "pattern film" changed everything for me. I am a better artist now - but this sure helped me get started. The "speed" of our hand piece - and the stencil film are a magic combination. Plus we now have a lot of "videos" to show you how to use it. We have come a long way in 30 years, but most people still do not know anything about us.

[@samhaidemenos]

Dr Lew Jensen thank you very much, I can't wait to get some and start carving some of my designs!

[@Dark-legion]

What type or exacte name of the tool u useing and can you tell me other tools that can do the exact work I have some truble finding a good one

[@jesussolis2703]

What kind of paper do u use ?

[@cardznbeadz]

Always wanted to, maybe I'll start this year.

[@MrAlittle5150]

Is that a NEY Hurricane high speed headpiece?

[@DrLewJensen]

Sorry so slow at getting back to you. I am the dentist who started all the "straight" designed high-speed drills. There are three models done long before the Ney hand pieces and this one is the "300" - not the hurricane. The "lab" business does love my design, but there are a gazillion "other" terrific uses for the high-speed tool. Check out my "other" video that is also posted here by Russ Larson. You might like these two new clips that present "more" of what my whole new world is all about. Come back - if anything interests you. BONUS VIDEO - AIMING YOUR LIFE kzbin.info/www/bejne/qmW7pWqrpqqZiNk STEP ONE... kzbin.info/www/bejne/jIvOlqCLn9Onf68

[@MrAlittle5150]

Dr Lew Jensen I been doing dental lab work for over 40 years and just did my first gun stock with a NEY hurricane, turn out real nice, I think. I have been working with the NEY hand pieces for over 25 years, and they work great. Kavo & Buffalo make a good one too. Just bought one of eBay for $200, great deal. I really enjoy the hobby. Thanks for posting the video.

[@beatrizflorez3960]

Hey Russ!! I wonder what tool this is and how can I get it!! I am an engraving artist, 4 years of work and I am speechless

[@bryce995]

Can it cut/engrave metal or plastic?

[@ANJU4444EJ]

Can someone please help me with what sheet is used here to to stick the design

[@vipulverma2749]

which tool you are using for where can i buy that plz help!!

[@unvoicinggman]

a Turbo Carver

[@lisac7151]

I am very new to this. What other kind of film or paper can you use for your template? Thanks in advance!

[@justincv]

Lisa C wax paper works good

[@lisac7151]

Thank you so much, Justin!

[@patrickbriones3962]

What is this tool called and where can i buy it?

[@korykocks4439]

What kind of stencil transfer paper is this?

[@DrLewJensen]

I thought I got to this question - but maybe it was for someone else. It is a vinyl Mylar and the thickness is only .003 inch which makes it work so well for two reasons. One - it can go through a photocopier and reproduce your pattern for you. Then it has an adhesive backing so it will "stick" right to your projects. Since it is so thin... it allows you to trace the design right onto anything - it works so well. Profitable Hobbies carries the film at www.profitablehobbiesstore.com Or you can call Tam at 800-624-7415. It is hard to find.

[@Jake0483]

Like the video, it's been very helpful, only problem i've got is i cant seem to find the mylar sheets thats you are using over here in the UK...

[@Rich171090]

Ebay my friend. I've just bought some.

[@RonSnayberger]

Profitable hobbies. Sell the sheets.

[@rosearthur1]

Wish I could find it. Any clues?

[@akshaypsa]

What's the name of the tool you are using?

[@elbobojacobo6041]

How fast can this thing go through your finger?

[@Ashley-id2cb]

What is the paper/stencil u placed on the wood??? I would like a kit

[@jjdjustforfun]

i always wanted one but too expensive and i noticed its actually balsa wood the grain if it was maple would be tighter

[@jhonvasquez8797]

Im new to this, what is the name of the tool he is using and where can i buy it? (I live in Canada)

[@bakebean11]

Where do u get the paper from or do it ha a specific name?

[@arielbaby9832]

Where do I get the tool at and where do I also get the film? Can this be done on glass as well

[@marycatherineparker2136]

love your humor !!!!!!

[@robinsunny5093]

Where did buy this burning tool

[@AustinsChannel888]

Where can I get those paper/film? I can stick it on?

[@kingkazuma2568]

whats the name of the tool ur useing ?

[@EddieMack626]

How much was the machine you are using?

[@kellylyrics7473]

hi, would i be able to write poems on wood with this easily?

[@chabeta15]

what kind of graver machine you use?

[@chrisjeriko8527]

Where can I get something similar to this I want to carve out wood ? Thanks in advance!

[@hanypersonal4057]

How much the prize and what county manufacturing it

[@marcjuliano4647]

Where do you purchase the pattern film ?

[@TaterTots620]

you're hilarious. i watch for talent and personality

[@purrucajb1]

Wow you do such an amassing job where can I get those tools for the carving so I can do that too thank you for the tutorial I enjoyed it a lot god bless you

[@DrLewJensen]

Here are a couple of videos that might help you figure this whole new world "out" a bit more. We have been at it a while... Go to Profitable Hobbies.com and check out our program. We help "beginners" grow to a "master" level in Seven Steps. BONUS VIDEO - AIMING YOUR LIFE kzbin.info/www/bejne/qmW7pWqrpqqZiNk STEP ONE... kzbin.info/www/bejne/jIvOlqCLn9Onf68

[@meddysable]

Reply

[@MorrowSind]

I'd love to see this in HD.

[@RonSnayberger]

I learn something every time I watch this

[@theresafoxx9338]

Im a complete beginner. How hard would this be to learn? Honestly. Im interested in making small wood signs for my garden shop. And then maybe moving to making signs for homes, etc. I have been on utube looking at different tools. Thanks for your response.

[@RussLarsen]

Yes, it is a dental lab handpiece. For more information and demo videos, please visit Profitable Hobbies .com. Thanks

[@Yannis2022]

Perhaps this technique would work to hand engrave branding Irons for Wood in steel?

[@rantai30]

Where can i buy the machine?? I really need it..