Wood Glue Basics and Application Tips

  Рет қаралды 204,342

WoodworkersJournal

WoodworkersJournal

Күн бұрын

Пікірлер: 41
@alexandernordin3399
@alexandernordin3399 Жыл бұрын
You are so thoughtful with each word! Thank you for the video :)
@squidward2540
@squidward2540 2 жыл бұрын
thank you sir for giving us those professional opinions
@trkx444
@trkx444 Жыл бұрын
Thank you this helpful video. What if you were in a situation where you can't clamp the components together [like joining the arms to the body of a sculpture] would you still recommend PVA glue as adhesive?
@anonymoususer4356
@anonymoususer4356 9 ай бұрын
Great video, thank you for the tips!
@SensieRodriguez
@SensieRodriguez 2 жыл бұрын
Thanks for posting this
@sly9263
@sly9263 5 жыл бұрын
Thanks for sharing your experience.
@regiment6541
@regiment6541 2 жыл бұрын
Helpful. Thanks
@mdritch
@mdritch 9 ай бұрын
Hello, great video. I have an old Kay parlor guitar. The bridge was bolted down on top of the guitar's finish with no glue. It has lifted up and I have removed the bridge. I want to glue it down and re-bolt it. Is there a glue that will bond the wood bridge to the guitar's glossy finish, or should I remove the finish (fairly thick)? thanks for your help.
@smellthewooodcom942
@smellthewooodcom942 4 жыл бұрын
Wow that’s beautiful ! Nice work.
@tomekc1113
@tomekc1113 2 жыл бұрын
Thank you :)
@InsaneWayne355
@InsaneWayne355 8 жыл бұрын
Thank you for the tips. They are most helpful.
@WindOnMyWings
@WindOnMyWings 5 жыл бұрын
That was helpful, thanks. Subscribed!
@1029pb
@1029pb 6 жыл бұрын
Thanks I learned some new points
@erikaglenn2844
@erikaglenn2844 5 жыл бұрын
Useful, thanks!
@lauried.2708
@lauried.2708 4 жыл бұрын
I have a joint on a chair that I can only spread apart 1/8 of an inch. I have cleaned the areas with sandpaper slid into the gap.I am using a bar clap to squeeze it together with wood glue(Titebond) attempt #1 and Gorilla clear glue the 2nd & 3rd attempt.It keeps pulling apart. The dowels are not securing it. Should I put a screw in it to secure it & then cover the hole with a wood plug.?
@quirkygreece
@quirkygreece Жыл бұрын
Did I hear you say at 4:18 that 10 degrees Centigrade is 18 degrees Fahrenheit?
@xx_pcgamer_xx6866
@xx_pcgamer_xx6866 9 ай бұрын
A difference of ten degrees centigrade is a difference of 18 degrees in Fahrenheit
@pritibagia6240
@pritibagia6240 5 жыл бұрын
I recently purchased a DIY wooden sailboat model kit. Can you suggest me which type of glue I can used for this boat assemble?
@ahhimary3475
@ahhimary3475 Жыл бұрын
Is this PVA glue same as Titebond or is it just trade name?
@PtrOBrn
@PtrOBrn 10 жыл бұрын
lol... 2:33 Alternate Interior Angles are Equal... some of that math people said they would never use.
@rickysdiecastmodels3067
@rickysdiecastmodels3067 6 жыл бұрын
Peter O'Brien k me
@boatymcboatface45yearsago59
@boatymcboatface45yearsago59 5 жыл бұрын
I knew people who said Geometry would never be used despite it being one of the most used mathematics
@theduder2617
@theduder2617 5 жыл бұрын
A cleaner which contains amyl acetate is capable of removing liquid nails, lacquers, polyurethane stains, and a whole lot more. Products far more harder to remove than titebond 3. Test fabric first for damage before soaking it in the cleaner. If no damage, soak for 30 minutes, agitate with gloved hands, soak another 10 minutes if any glue remains. Rinse in water before running through the washing machine.
@ryans9029
@ryans9029 3 жыл бұрын
Difficulty in removing does not equate which solvent will break down an adhesive or glue
@theduder2617
@theduder2617 3 жыл бұрын
@@ryans9029 Did you read what you were about to post before posting? I literally stated a solvent that does break down a multitude of adhesives. Chemistry class, high school level, first year. If you understand the adhesive, you can then locate a substance which can remove said adhesive.
@bob_frazier
@bob_frazier 3 жыл бұрын
I need to laminate some cedar strips that have to be wet in order to bend. Anybody have experience with this? Going to try Titebond 3. What do you think?
@hosoiarchives4858
@hosoiarchives4858 Жыл бұрын
What kind of clamps are those?
@muii6319
@muii6319 4 жыл бұрын
At school rn got given this link
@EnergeticWaves
@EnergeticWaves 8 жыл бұрын
Is it ok to use a planer to remove excess glue?
@Erowens98
@Erowens98 7 жыл бұрын
You can do it but the blade will wear faster. Do so based on your own judgment.
@tomellis487
@tomellis487 5 жыл бұрын
Why put on so much glue you need to wipe, it would seem, half of it off?
@sza2562
@sza2562 2 жыл бұрын
Drying time?
@luisrivera6794
@luisrivera6794 5 жыл бұрын
So what’s the best overall glues for wood
@williesamuel9266
@williesamuel9266 5 жыл бұрын
Hello I need your help on PVA glue
@DrAElemayo
@DrAElemayo 4 жыл бұрын
Wood glue
@keatomic
@keatomic 10 ай бұрын
Do not clamp too tight.
@ramadevikonka2424
@ramadevikonka2424 3 жыл бұрын
Eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
@Timapro_m10
@Timapro_m10 8 ай бұрын
why he gotta do his wife like that 😭
Jim Heavey answers his most common Titebond Glue questions
29:22
5 tips youtube woodworkers give that professionals HATE
16:13
ENCurtis
Рет қаралды 373 М.
It works #beatbox #tiktok
00:34
BeatboxJCOP
Рет қаралды 41 МЛН
How To Choose and Use the Right Glue - WOOD magazine
22:01
WOOD magazine
Рет қаралды 54 М.
I Don't Get Why People Still Use These Joints
17:26
Lincoln St. Woodworks
Рет қаралды 1,8 МЛН
5 Secrets to Great Glue-ups
33:52
Epic Woodworking
Рет қаралды 59 М.
What You Need to Know About Glue | WOODWORKING BASICS
9:37
Steve Ramsey - Woodworking for Mere Mortals
Рет қаралды 1,7 МЛН
Woodworker's Guide to Titebond Glue
18:47
The Wood Whisperer
Рет қаралды 234 М.
[UPDATED CA Glue Tips and Tricks] How to Use CA Glue Like a PRO!
11:41
Why I don't use Gorilla Glue
11:36
Stumpy Nubs (James Hamilton)
Рет қаралды 916 М.