#Woodturning

Here I unbox a Record Power SC4 chuck and install new 100mm jaws
so simple and fun to make and make cash sales at fairs...
please contact me at... [e-mail]
If you would like to support my channel… you could do so by…
buying me a coffee… in the link below… its a one off payment…
its not expected but very much appreciated…
www.buymeacoff...
Disclaimer
this is not a tutorial .. this is the way that I like to work… you must only do what you deem to be safe…

[@ThePapa1947]

Great looking chuck Andy. You can never have too many!

[@AndysCornishCreations]

Hi Gary... Toys for boys... we just love them... haha... Take care my friend and all the best from Andy

[@54lespaul3]

Thanks Andy! It’s always nice to see what people are using. I have a couple of chucks also and keep different size jaws on them. Makes it so much easier than changing out the jaws . Cheers,Rick

[@AndysCornishCreations]

Hi Rick... My pleasure.. I'm glad that you liked it... I totally agree with you... I hate changing jaws over but never imagined that I would ever own 5 chucks... Take care my friend and all the best from Andy

[@RadioFaceWoodWorks]

Hi Andy...i got a Record Power Envoy...they make great tools and have great customer service...always fun to get new toys😊...stay safe...press on 😎 Joe

[@AndysCornishCreations]

Hi Joe... I totally agree with you... a great Sheffield company.. Haha.. we all love new toys... Take care my friend...All the best.....Andy

[@toddatglencovewoodworks]

You might consider buying a T-handle Allen wrench for the jaw screws. It’s a lot easier on the hands! 😊 Looks like a nice chuck

[@jackthompson5092]

Great chuck Andy.

[@AndysCornishCreations]

Hi Jack... Yes.. I really rate the Record Power chucks... Take care my friend and all the best from Andy

[@WoodenItBeNice]

That's a very nice chuck Andy and far cheaper than the Axminster equivalent. I couldn't believe the price of of those jaws, WOW. I have to admit I'm very happy with my SC2. Take care my friend. Cheers, Huw

[@TheMessyStudio]

I love my SC4s, Andy!

[@AndysCornishCreations]

Hi Billy... I'm glad that you like them... Record Power do quite well in America.. the prices are really good... Take care my friend and all the best from Andy

[@spindlesworkshop9744]

Have to love new toys!

[@AndysCornishCreations]

Hi Luie... We do like our new toys... Take care my friend...All the best.....Andy

[@markduggan3451]

Looks like a great chuck.

[@AndysCornishCreations]

Hi Mark... Yes... solid and great price.... Take care my friend and all the best from Andy

[@copperowlwoodturning5929]

Thank you for showing your new chuck body and jaws. Great deal too, and it is always great to have more than one chuck to limit change over and keep you turning. Great to hear from you. Take care, Rob. 😊

[@garrydeimert7397]

These are good chucks for the money, i too have the same one bought from yandles, the price is good and the jaws are not too expensive, i bought my new Laguna lathe from yandles and had a great experience with them, and they are local to me. Thanks Andy.

[@malbun3275]

Hi Andy Always nice to add more items to the lathe to expand one’s ability to cope with different situations. I fell in years ago to thinking I need that special tool that a professional turner demonstrated on how to do a specific part of his turning.finally woke up to the fact it’s not only the tool but you need to learn how to use it properly to get the end result!! Now after nearly 30 years of turning my bowl turning uses 1x spindle gouge 1x bowl gouge 1x round end scraper the other twenty or so tools wait patiently to be used on boxes or other items like maybe an Andy Gonk ! Thanks for sharing and nice to know you have a dry day for a change Regards

[@denisvienat849]

Hi Andy c’est un très bon mandrin 👍 merci pour cette présentation 👏 prend soin de toi 👋

[@AndysCornishCreations]

Hi Denis... oui... c'est un mandrin vraiment bien fait... Je suis content que tu aies aimé la vidéo... prends soin de toi mon ami et tout le meilleur d'Andy

[@MarklTucson]

Completely agree with your assessment of this chuck. I have a couple of the companion chucks and have found that it is more cost effective and actually faster to switch out chucks than to change jaws even on the quick-change jaw systems. Have been completely satisfied with my Record chucks. One of the reasons I chose the Record was because it follows the standard of tightening clockwise and loosening counter-clockwise.

[@AndysCornishCreations]

Hi Mark... Yes... I too dislike changing jaw sets and though I never imagined having 5 chucks , I have.. I assumed that all lathes were threaded this way ... Take care my friend and all the best from Andy

[@morningsong7885]

I like the part with the matching numbers 😂 Rest is maybe a bit on the fiddly side for me, but you know, I am used to Ikea instructions 😝😉 Well done, Andy 👍🏻👏🏻

[@AndysCornishCreations]

Hi Jude... I'm glad that you found it interesting... Instructions... as a man.. we don't look at the Instructions.. we just put it together and store the left over parts 🤔 Have a lovely Easter weekend Jude... Take care my friend and all the best from Andy 👋 😊 👋

[@trurex007lee7]

Hi Andy! Even though the jaws are special engineered, I like your step of the aligning the loose jaws in the closed position. In your next video that you use the chuck/jaws please mention the chuck and why.

[@OregonOldTimerWOODTURNING]

The instructions advise mounting the jaws that way.

[@AndysCornishCreations]

Hi Lee... I'm glad that you found the video interesting... I will try to remember the next time I use the chuck and jaws in a video... Take care my friend and all the best from Andy

[@colinmacdonald404]

Thanks 👍

[@AndysCornishCreations]

Hi Colin... Thank you... Take care my friend and all the best from Andy

[@OregonOldTimerWOODTURNING]

Just received an SC4 yesterday. Easy way to insert that leather bit is to press it into the hole from inside the chuck body before screwing in the insert.😁

[@AndysCornishCreations]

Hi Oregon..... I hope that you enjoy using your new chuck... Haha... yes.. I wasn't really thinking, I used that method on the insert..senior moment 😂 Take care my friend and all the best from Andy

[@emgiwoodworks]

I use RP chucks as well, the SC3 though because that one doesn't require an adapter. My only complaint is that you do not get an additional set of screws when you order separate jaws. With RP, if you lose a screw, you are screwed. 😎

[@AndysCornishCreations]

Hi Leo... Yes.. I have a SC3 chuck too... I'm not sure why the SC4 doesn't have a m33x3.5 thread 🤔 The SC2 does as well... I agree, a set of screws would be a welcome addition.. Record Power supply a SC3 and SC4 fastening kit with jaw screws, grub screw and allen keys.. So not totally screwed... haha... Take care my friend and all the best from Andy

[@WoodenItBeNice]

Boom

[@AndysCornishCreations]

Hi Huw... Haha... get in there...🤣

[@Bretonlad]

Hi Andy, I enjoy watching your videos. Do you do courses on wood turning?

[@AndysCornishCreations]

Hi Bretonlad... I'm glad that you have enjoyed watching my videos... I'm afraid that I don't do courses... I'm not that good... Its only the video editing that makes me look like I know what I'm doing... Haha... Take care my friend...All the best.....Andy

[@fryeguy9939]

How much is that in American dollars ??? And what company??

[@MarklTucson]

Can't answer for Andy, but in the US, I've gotten the companion chuck from Craft Supplies USA (woodturnerscatalog on the web). They go for about $150 US

[@fryeguy9939]

@@MarklTucson okay thanks... I got mine at harbor freight for $100 , but since have gone up to $130..

[@AndysCornishCreations]

Hi Fryeguy... Over here the chuck is about £90.00 and the jaws are about £40.00... I bought these from Yandles in the UK... Take care my friend...All the best.....Andy