woodturning: an oak ball in the cubes ??

Difficult turning on three axes to create this large ball emerging between the cubes.
The finish is made with a glossy varnish for the ball and mat for the cubes blackened with a torch.
Thanks for watching my video.
www.etsy.com/f...
15% off on your 1st order with the code Breizhartwood-21 on
www.colle21.com​
Please note my videos are not intended to educate or serve as a learning method.
They are used only for entertainment.
Do not duplicate what I do because it could be very dangerous.
Difficile tournage sur trois axes pour créer cette grosse boule émergente entre les cubes .
La finition est réalisée au vernis brillant pour la boule et mat pour les cubes noircis au chalumeau.
Merci d'avoir regardé ma vidéo .
www.etsy.com/f...
-15 % sur votre 1 ère commande avec le code Breizhartwood-21 sur
www.colle21.com
Attention mes vidéos ne sont pas faites pour éduquer ou servir de méthode d'apprentissage.
Elles servent uniquement de divertissement.
Ne reproduisez pas ce que je fais car cela pourrait être très dangereux
music composed and performed by myself
#woodturning
#woodworking
#bawbreizhartwood
#oakcube

[@charles-arthurradford957]

La technique de réalisation est surprenante mais le résultat final est très chouette !

[@bawbreizhartwood]

Bonjour Charles-Arthur Je suis très content que vous appréciez cette pièce taillée dans du chêne extrêmement dur.😉👍

[@joachimgrek6920]

Nice thing to put your hot pots and pans on while serving food!

[@bawbreizhartwood]

Joachim Everything is done !! you are right it can be used as a trivet 😉👍

[@jasonjohnson3605]

That is thee coolest thing i think I've ever seen anyone make on a lathe. Ive always been curious what would look like. A square ball too cool !

[@bawbreizhartwood]

Glad you like it Jason, especially since this piece was very difficult to do 😊💕

[@POULPY47]

Original et bien fini , un plaisir des yeux !

[@bawbreizhartwood]

😉👍👍Merci 💕

[@oliviervaujour7736]

Vraiment bravo, il y a tout,une idée , la technique pour la réaliser et la finition.

[@bawbreizhartwood]

Bonsoir Olivier Merci pour votre commentaire 😉 Ce tournage a mis mes nerfs à rude épreuve,entre le risque de plantage dans les cubes ou les fissures et la géométrie sur trois axes qui se devait d’être parfaite sans quoi la boule n’aurait pu être réalisée..🤪

[@mikeknoke3594]

Wow love your creativity, this is a real conversation piece.

[@bawbreizhartwood]

Thanks Mike i'm very glad you like it 😉👍👍

[@BAILEYWOODWORKS]

This is great for saving the original wood surface!

[@bawbreizhartwood]

Thank you so much for your comment 🤪👍

[@yvonnehughes3036]

WoW! This was so interesting to watch. Awesme piece of work

[@bawbreizhartwood]

Thank you so much Yvonne,i'm very happy that you appreciate my work 😊💖💖

[@RadioFaceWoodWorks]

Very clever idea...great work...stay safe...press on 😎 Joe

[@bawbreizhartwood]

Thank you so much for your comment 😉👍

[@plainsroamer405]

Okay, that's pretty cool!!!

[@bawbreizhartwood]

Thank you so much Plains runner😉👍

[@spiritwynd]

A beautiful piece of art that was trapped in a block of wood. You helped it escape! Love it and I'm going to have to try it now! Stay safe! - Heather

[@bawbreizhartwood]

Hi heather Thank you very much for your comment😉👍 I'm glad you interpreted my work well bien I wish you good luck in making this piece and especially be very careful because it is dangerous😉 see you soon Morgan

[@tpsb05]

Très belle idée. Bravo !

[@bawbreizhartwood]

Bonjour tpsb05 Merci pour le commentaire 😉👍

[@peterrandall9523]

Brilliant concept and very well executed 🎉

[@bawbreizhartwood]

Thank you so much Peter 😍

[@ingridbaasbecking2999]

Wow! Love it!

[@bawbreizhartwood]

Ingrid Thank you so much ❤️❤️❤️

[@sapphodesigns2377]

Very rustic..love it

[@bawbreizhartwood]

Sappho Thank you so much ❤️❤️❤️ I’m glad you like it 😊

[@vickiejenkinson2468]

#1 you have my complete undivided attention! #2 I was very concerned about those large cracks on sides 2 and 3 #3 when applying finish to the one large crack... it looked a HUMONGOUS walnut Finally Morgan, that is such a great and original project. Wonderful idea and great execution. Thank you for sharing your creativity with me again. Stay safe, Vickie

[@bawbreizhartwood]

Hello Vickie Jenkinson, A big THANK YOU to you for your support👍👍 I see you noticed the complexity of the project, only connoisseurs can see this😉 I am very happy to share this passion with you 💕 see you soon friend Morgan

[@femifalase5576]

I was hoping it will be sliced into two symmetrical halves with the insides eviscerated to make two bowls on stands.

[@creepytodd1774]

Truly terrifying the way your plan was executed! 🎩🎂🐰🐯🙊🙉🙈

[@bawbreizhartwood]

Hi Todd Thank you so much for your comment 😉

[@lilyartwood]

Wow !! super original 🌟 👍et unique !! La réalisation n'a pas dû être facile.. bravo 👏👏

[@bawbreizhartwood]

Salut Lily Merci pour ton commentaire 😉👍 Ce projet fut éprouvant et demandait beaucoup de minutie effectivement..😊 À bientôt Morgan

[@BadAppleWoodwerx]

Wow, what a crazy project, but so very cool. 😎

[@bawbreizhartwood]

Bad Apple Woodwerx Yes it was a crazy project 🤪🙃 Thank you for your comment. 😉

[@henrykleyn3423]

Fantastic imagination.

[@bawbreizhartwood]

Hi Henry Thank you so much for your comment ❤️❤️

[@marcbrissette8831]

Magnifique!

[@bawbreizhartwood]

Merci beaucoup pour votre commentaire Marc 😊💖

[@sgmrose]

Clever imagination!

[@bawbreizhartwood]

Hi Wayne Thank you so much for your comment ❤️👍

[@kevdimo6459]

Ha you’re so brave to begin working on that piece. I’d be frightened it would throw me across the floor. It’s a beautiful piece once again I’m in awe of your craft. 👍🏻

[@bawbreizhartwood]

Kevin dimond Yes you have to be very careful 😉 Thank you very much for your comment, I am glad that you appreciate my work 😊❤️❤️❤️

[@rdyer8764]

Nice idea.

[@bawbreizhartwood]

Thank you so much for your comment 👍

[@yeagerxp]

Beautiful creation👍👍👍 . Thanks for sharing. A proto-planet that you a puny human was carving out in space, then the gods got a hint of it and stopped you. LOL. Awesome

[@bawbreizhartwood]

yeagerxp Nice interpretation 😃🤣 Thank you for your comment👍😉 see you soon

[@hbwoodturning17]

A unique project you made Morgan, I like that you chose to use the existing surfaces that gives it a weathered look. Cheers, Hans Stay safe and keep turning

[@bawbreizhartwood]

Hi HB Thank you so much for your comment 👍😉 I’m very glad you like it 😊

[@MCfattyB]

No idea what it is, but that's art for you and I like very much

[@bawbreizhartwood]

Thank you so much 😉👍

[@luisalbertoruizgalindoroma5892]

Felicidades, te quedo muy original; entre geométrico y rústico. 👍🏼

[@bawbreizhartwood]

Luis Alberto Ruiz Galindo es cierto que es exactamente rústico y geométrico👍 Gracias por tu comentario Luis. Te veo pronto

[@spikewillow4552]

Great looking piece dude !

[@bawbreizhartwood]

Spike Thank you so much 😉❤️

[@harryhagelund7674]

Your vision is amazing! Unique, beautiful work-art!

[@bawbreizhartwood]

Harry hagelund Thank you very much for your comment 😉 I am very flattered 😊 .. see you soon

[@jean-louishoules5198]

Ton idée est géniale, le résultat final superbe. 😊 👍

[@bawbreizhartwood]

Salut Jean -Louis Merci à toi pour ton encourageant commentaire 👍😊 À bientôt Morgan

[@mulletman6318]

That's amazing 👏

[@bawbreizhartwood]

Hi mullet Thank you so much for your comment 😉👍

[@julietsargent1086]

You come up with some wonderful ideas, all of them are fantastic

[@bawbreizhartwood]

Hi Juliet Thank you so much ,i'm very flattered 😊💖💖💖💖

[@flytrapjohn]

My favourite part of interrupted cuts? The diesel engine sound.

[@bawbreizhartwood]

toilet paper mittens 🤣😂 yes that's true

[@denisdesmeules2965]

Wow! Très intéressant et original!! J’aime beaucoup!!

[@bawbreizhartwood]

Bonjour Denis Merci beaucoup pour votre commentaire 😉👍 Je suis très heureux que vous appréciez cette pièce 😃 À Bientôt

[@denisvienat849]

Jolie travail et très original bravo pour votre inspiration 👍👏☀️👏👍

[@bawbreizhartwood]

Bonjour Denis, Merci beaucoup pour votre commentaire 😉 C’est toujours très enrichissant de partager ses créations avec des passionnés 😊 À bientôt Morgan

[@mariateresalatte5208]

Técnica genial!!!!!!!

[@bawbreizhartwood]

Thanks Maria ❤️

[@moisesmunos7211]

Very good

[@bawbreizhartwood]

Thank you so much 😊

[@ThePapa1947]

Very clever Morgan! It turned out very cool looking. Take care, Gary

[@bawbreizhartwood]

Hi Gary Thank you so much for your comment 😉👍 I’m very glad you like it 😃 Take care friend Morgan

[@RickTurnsWoodturning]

That’s cool, BAW!

[@bawbreizhartwood]

Hi Rick Thank you so much for your comment 😉👍

[@davidmahoy4478]

Incredible

[@bawbreizhartwood]

Hi David Thank you so much for your comment 😉👍

[@EdwinMedinaTornoyArte]

Espectacular esa obra, fuera de serie...lo felicito

[@bawbreizhartwood]

Edwin Medina Torno y arte Gracias por tu comentario😉👍 hasta pronto amigo

[@AndrewR74]

Nice!

[@bawbreizhartwood]

Hi Andrew Thank you so much for your comment 😉

[@RubenWoodcraft]

That's awesome. Very creative and inspiring

[@bawbreizhartwood]

😉😉thank you so much for your comment 👍

[@maxhunt2644]

That was a fantastic creation! One thing which would give it more meaning for us viewers would be to glue some rather large brass balls on the opposite corners of one side and make that the bottom! I wonder how many videos by the myriad of turners on KZbin "go south" and we never see them?

[@bawbreizhartwood]

Hi Max Thank you so much for your comment 😉👍 your idea is good, it could inspire me for future creations🤔

[@rosiepollard2478]

A clever turning. 😊

[@bawbreizhartwood]

Hi Rosie Thank you so much for your comment 👍💕

[@trurex007lee7]

Interesting design!

[@bawbreizhartwood]

Thank you so much for your comment 😉👍

[@ThePontiacmann]

WOOOW

[@bawbreizhartwood]

💕thank you 😉

[@heathermacmillan962]

Another fantastic idea...turned out great 👍😎

[@bawbreizhartwood]

Hi Heather Thank you so much for your comment 😉👍 I’m very glad you like it 👍

[@willaiml]

I really like your ideas

[@bawbreizhartwood]

Hi William Thank you so much for your comment 😉👍 I’m very glad you like it 😃 Take care

[@j.s_cabin]

If, if i turn this, or this kind things, i will give credits to you. So nice, so nice, bravo😍😍😍🇫🇮

[@bawbreizhartwood]

Thank you so much for your comment 😉👍

[@blablablaboom]

Incredible idea 💡

[@bawbreizhartwood]

Thank you so much 😉👍

[@edwardbrantley1411]

I like that

[@bawbreizhartwood]

Thanks Edward,i'm glad you liked it 💖💖

[@MrAlazrai]

good job

[@bawbreizhartwood]

Hani Thank you so much 😊

[@cookiescoop6065]

Very beautiful

[@bawbreizhartwood]

Hi Cookies coop Thank you so much for your comment 👍😉

[@docgreenthumb7277]

impressive

[@bawbreizhartwood]

😉😊❤️

[@jackthompson8019]

Very interesting.

[@bawbreizhartwood]

Hi Jack Thank you so much for your comment 😉👍 See you soon

[@msudawgma]

Very, very interesting, but neat nonetheless.

[@bawbreizhartwood]

Hi Thank you so much for your comment 😉👍

[@permeus2nd]

Interesting idea, my personal taste would have been to have the central ball a lighter colour but still a nice piece.

[@bawbreizhartwood]

Hi permeus Thank you so much for your comment 😉👍 I’m happy you like it 😃

[@_scorpion94_]

A beautiful piece of art 👌🏼

[@bawbreizhartwood]

Hi Tyler Thomas Thank you so much for your comment 👍😃

[@_scorpion94_]

@@bawbreizhartwood true art deserves to be admired.

[@bawbreizhartwood]

Tyler thomas A big thank you ❤️ I am very flattered😊

[@_scorpion94_]

@@bawbreizhartwood most welcome!

[@vickiejenkinson2468]

Once again I find it very sad...1.2K views but only 114 could take the time to give it a thumbs-up 👍. I don't understand.

[@bawbreizhartwood]

Vickie Jenkinson Thanks again for your support! What matters is to share this passion with people like you because it is enriching. see you soon 😉

[@stevenhood6284]

The advertisements do it for me! I know it’s YT but drives me berserk

[@coswood3454]

Beautiful piece 👌

[@bawbreizhartwood]

Hi Coswood Thank you so much for your comment 😉👍

[@w.woodturningcolecionismo2490]

Nice

[@bawbreizhartwood]

😉 thank You for your comment 👍👍

[@jimwazlawik4424]

Nice work. I think if I were to do something similar, I would bore out the center of one side so if a person wanted to use it as a vessel of some sort they could, or that opening could just be on the bottom and no one would know it's there. Multi purpose uses...

[@bawbreizhartwood]

Jim wazlawik Thank you for your comment😉👍 Yes I thought about digging to make a ship, but the angle wouldn't have allowed me to do it correctly🤔

[@marcenariahobby7pallet]

seu trabalho turno ficou muito bom🇧🇷👍💯

[@bawbreizhartwood]

😉💕👍

[@РафаэльКаримов-л5я]

Потрясающее воображение!!

[@bawbreizhartwood]

Рафаэль Каримов Спасибо за ваш комментарий😉👍

[@dr.skipkazarian5556]

This is very difficult in both physical demands and aesthetics. I am curious to know, given your obvious talent for design, if you work on any other projects using other tools, materials, and engineering skills?

[@bawbreizhartwood]

Dr Skip Kazarian Thank you for your comment👍 Yes, you got it right, I also work with other materials such as metal, stone or ceramic. To achieve this kind of piece you need to step back on the 3-D vision and be careful. Take care friend Morgan

[@darta1094]

Nice piece of work. But how did you guess that there was a ball inside this block of wood? 🤔

[@bawbreizhartwood]

Dimitri :)) Thank you I didn't guess, I discovered it by chance ..;)

[@darta1094]

No, seriously, I always marvel at masters like you, who can see final beauty in piece of raw material. 👍

[@ivanleterror9158]

Sounded like the African Queen at times.

[@bawbreizhartwood]

Ivan Leterror 😂🤣 yes that's a bit like that ..

[@ivanleterror9158]

@@bawbreizhartwood Just watched that here on the tube recently (released from copyright evidently). Colorized

[@lofromfrance6478]

A chaque début de vidéo je me dis mais qu’est-ce qu’il fait ? Et à la fin je suis scotchée

[@bawbreizhartwood]

Merci beaucoup pour votre commentaire 😊👍👍❤️

[@attilathehamster6774]

Absolutely stunning, however, please bolt down your lathe, you'll have someone's eye out with that.

[@bawbreizhartwood]

Sean stephen Thank you very much for your comment. Wood lathes which are mounted on silent blocks must not be bolted, otherwise the bearings will be destroyed. 😉

[@rodolfogilvanfantim2822]

PARABENS , SO EXISTE UMA PEÇA DESSA ,,,, A SUA,,,KKKKKKKKKKKKKKKKKKKKKKKKK

[@bawbreizhartwood]

Rodolfo Gilvan Fantim Obrigado pelo seu comentário😉👍😊💕

[@tokooficina]

👌💯🇧🇷

[@bawbreizhartwood]

👍😉😃

[@richiegomez2769]

Sounds like Monty python horses.

[@bawbreizhartwood]

😳

[@НесторМахно-б9с]

Ну и на хрена это?

[@bawbreizhartwood]

Вещь ..

[@bradwiebelhaus7065]

Nice

[@bawbreizhartwood]

Hi Brad Thank you so much for your comment 😉👍