Woodturning | Easy Inlay Project

[@richardabbott5601]

Really liked the inlay

[@CarlJacobson]

Thank you Richard!!

[@RayWhitbyCreations]

Beautiful piece Carl!

[@CarlJacobson]

Thank you very much Ray!!

[@trurex007lee7]

Beautiful coloring with the walnut oil on the maple. The inlay was a great accent.

[@CarlJacobson]

Thank you very much!

[@staynavytom2963]

Another nice project with thanks again to Robin for the pleasing background music selection. BTW, I watched your rolling pin video from 10 years ago. Your equipment was much more modest but same great results. Proof that it’s the artist and not the tools. Although the tools are cool. You haven’t aged a day in the last ten years.

[@CarlJacobson]

Thank you so much!! (from both of us ) Ohhh the old squeaky Delta! That brings back some memories! I just went back and watched that video, and you are very kind lol Thanks again buddy!

[@richardschaffling9882]

Looks real good

[@CarlJacobson]

Thank you Richard!!

[@LewisKauffman]

Now that's the way to do inlays! Sweet project!!! Looks like that new sandpaper is working out really nice.

[@CarlJacobson]

Thank you Lewis!! Yes this inlay is so easy! I love the sand paper, it's working out great!

[@imaginegrove]

@@CarlJacobson hence EasyInlay

[@jackthompson8019]

Neat idea Carl. Looks great as well.

[@CarlJacobson]

Thank you Jack!

[@ronbeckhaus7326]

Gorgeous, Carl, I love theceasy inlay, mate. Cheers!

[@CarlJacobson]

Thank you very much Ron!! It's great stuff!!

[@alexioscorfu8658]

nice work Carl. Bravo! This inlay is nicely deceiving... thanx for the video

[@CarlJacobson]

Thank you very much!!

[@jamesstanlake4064]

Very nice. People loo at the finished project and think it is super difficult to do but as you demonstrate it is much easier than it appears. Love it!

[@CarlJacobson]

Thank you James!! It's very simple, and looks great! I love it too!

[@marklengal9990]

I love the inlay. I just ordered some from Scott. Perfect for lidded boxes too.

[@CarlJacobson]

Thank you Mark, it's great stuff!

[@glenmckelvey5952]

That's my kinda inlay simple lol . Looks great have a good weekend take care .

[@CarlJacobson]

Thank you buddy!! Right?! It's awesome! Have a good weekend!

[@kris_kreations]

Cute little pot, very nice grain. ❤️

[@CarlJacobson]

Thank you Kris! 😊

[@janicekneule5979]

I love this Carl ! Going to order the inlay and try this on a bowl or a box.

[@CarlJacobson]

Thank you Janice!! It's really cool stuff!!

[@leisongivangomo5656]

Beautiful!

[@CarlJacobson]

Thank you!!

[@papatom9009]

Very nice job Carl, thanks for sharing!

[@CarlJacobson]

Thank you Tom!!

[@timberdish]

Beautiful and easy inlay! Really nice looking project! 233mm is just over 9", if anyone's interested, so you weren't far off at all :D

[@CarlJacobson]

Thank you Matt!! lol I'm getting good at guesstimations ;)

[@jamiesussen5538]

Beautiful form!

[@CarlJacobson]

Thank you so much Jamie!!

[@nathancarr7593]

Really nice Carl will definitely be trying the easy inlay! Many thanks

[@CarlJacobson]

Thank you Nathan!! Yes it's slick stuff!!

[@glencrandall7051]

That certainly takes the work out of doing inlay. It's quick and looks great. But it looks link the only pattern available in strips is the Paua Abalone natural. Thank you for sharing. Have a great day and stay safe.

[@CarlJacobson]

Thank you Glen!! They might not have it up on their website yet, but they do have all the colors I showed in the video. Maybe message them if there's one you're looking for.

[@JiggsysShed]

Great work Carl. That inlay looks awesome.

[@CarlJacobson]

Thank you so much!!

[@DougMilleratWoodSpunRound]

Good looking project Carl. Those easy inlay strips sure make adding a decorative inlay easy.

[@CarlJacobson]

Thank you Doug!! Yes, it's slick stuff!!

[@tinkerv1383]

What a great idea Carl! Looks very delicate and easy to do. Thanks for sharing 🙂

[@CarlJacobson]

Thank you very much!!

[@florimundos]

Melhores "Easy Wood chuck" que já vi, troca as garras num instante em vez de aparafusar. Poupa muito tempo de trabalho. Bonito projeto.

[@CarlJacobson]

Obrigado!! Sim é um ótimo mandril!

[@budj13]

Great project and a really nice touch with the inlay. I love the "Easy Inlay" idea so thanks for sharing that! I don't often comment, but I really enjoy your content, Carl.

[@CarlJacobson]

Thank you so much Bud!! I really appreciate that!

[@markfishburn8284]

Very nicely done and it came out amazing. Thank you for sharing your video.

[@CarlJacobson]

Thanks so much Mark!!

[@jacquiemouton9053]

What a beautiful project. You always make things look easy, even though they are not. Lovely work.

[@CarlJacobson]

Thanks so much Jacquie!!

[@JordanWoodwerx]

That came out beautiful buddy, that inlay set it off, nice touch!!👍🏻👍🏻

[@CarlJacobson]

Thank you Buddy!! This inlay is awesome!

[@glennprovenzano1837]

wonderful piece

[@CarlJacobson]

Many thanks!

[@prspastor]

Nice work Carl! I like seeing those new 3M sanding mesh discs at work. I got mine in and I love them. 👍🏼👍🏼

[@CarlJacobson]

Thank you John!! Yes it's great stuff!

[@williamellis8993]

Really neat, Carl. First time I've seen those inlay strips. Take care. Bill

[@CarlJacobson]

Thank you Bill!! They're really nice, and easy to use! Take care

[@sapelesteve]

Beautiful piece Carl! The inlay really turned out looking great! 👍👍😉😉👏👏

[@CarlJacobson]

Thank you very much Steve!!

[@Smallathe]

Another wonderful project. It's a joy to see you work. Very inspiring!

[@CarlJacobson]

Thank you so much!!

[@ianvicedomini2648]

Really stunning piece Carl . The inlay stands out nicely mate. Great video buddy 👍🏼👍🏼

[@CarlJacobson]

Thank you buddy!

[@PatLap]

Awesome piece! ☺️

[@CarlJacobson]

Thank you brother!!

[@WoodenItBeNice]

Hi Carl, That inlay looks amazing. I'm going to see if I can get it here in the UK from somewhere. Great video as ever mate. Take care Carl. Cheers, Huw

[@CarlJacobson]

Thank you buddy!! I'm not sure if they have it in the UK, but you might check Amazon. Take care!

[@valborchardt3596]

Oh Carl, i saw this over on Instagram and i must tell you, its even more gorgeous on the video, thanks for sharing. As usual, take care xx

[@CarlJacobson]

Thank you so much Val!! Have a great weekend!

[@fleetswoodshop3339]

That turned out really beautiful my friend I love the way the inlay looks. And you did an awesome job on it as always thank you buddy from Doug

[@CarlJacobson]

Thank you so much Doug!! Have a great weekend!

[@fleetswoodshop3339]

You too Carl. Y'all have a wonderful weekend buddy

[@tracybowling97]

Mark Jacobson!!! You get 3 ! marks for this project! It is so so so beautiful. And Christmas is coming up. The pearly white strip might come in handy @ this time of year. (Hi Robin! 🖐🏻)

[@CarlJacobson]

Thank you so much Tracy!! I really love this inlay! Robin says Hi :)

[@tracybowling97]

@@CarlJacobson Me too!!!

[@randywood4782]

Good job I like it very nice 👍

[@CarlJacobson]

Thank you very much Randy!!

[@carbajalcustoms]

very nice Vase Carl! another thing you can do with the Easy Inlay products is use a laser cutter to cut out a shape and then inlay it into your piece.

[@CarlJacobson]

Great now I need a laser cutter...lol Thank you buddy!

[@kzookid2051]

Neat project. The CA glue adds some depth to the inlay sticker that looks good.

[@CarlJacobson]

Thanks!

[@carlstouse7698]

I like the inlay v,nice Carl Oz land👍😃

[@CarlJacobson]

Thank you so much Carl!!

[@jimgramstad3604]

Beautiful, thanks

[@CarlJacobson]

Thank you Jim!

[@bgpappy30]

I love it. I like the sandpaper. Where’s it from?

[@CarlJacobson]

Thank you Patrick!! I got this at Taylortools, lddy.no/11pnk

[@ultrawoody1968]

Very nice!

[@CarlJacobson]

Thank you!

[@MANJITSINGH-ko2oi]

HI carl super idea. weldne. given me ideas.

[@CarlJacobson]

Thank you :)

[@rkverma9089]

Very nice 😊

[@CarlJacobson]

Thank you! Cheers!

[@JOSEGIORDANOwoodturning]

Linda pieza Carl !!!! 🤗

[@CarlJacobson]

¡¡Gracias!!

[@uniqko]

May you be healthy and happy always.

[@CarlJacobson]

Thank you very much!! You too!!

[@masjabrikdiy8422]

Indah seperti kayu pohon nangka

[@CarlJacobson]

Terima kasih banyak!

[@steveb7290]

Beautiful work. What dead center are you using before changing to the chuck?

[@CarlJacobson]

Thank you Steve! It's the spur center that came with the Robust.

[@nedrix]

Uv curing resin is also an option besides CA to fill the groove.

[@CarlJacobson]

Thanks Adam!

[@I-build-crafts]

Hi Carl. I have been watching your videos for several years now. I really appreciate the quality and ease of you turning. I noticed that you are using a Robust lathe. I want to upgrade my lathe and am thinking about the sweet 16 - 110 volt Robust lathe. I need one with slower speeds and reverse. I have a question, I believe that the sweet 16 turns as low as 60 rpm, is that slow enough to resin to a milled sink while it's turning on the lathe? I know that the Powermatic turns as slow as 40 rpm. Thanks for the input!

[@CarlJacobson]

Hi Melanie, I send you a email.

[@dmcdani605]

Hi Carl . . . great and impressive demo . . . My question . . . you moved over the CA glue technique quite quickly and I'm wondering about the "over spill", i.e. where the CA glue spread onto and outside the beads and how you cleaned that up . . . obviously the stain left behind would show up through your finish, right?

[@CarlJacobson]

Thank you very much Dale!! I was really careful when I put it on. It did stain a little bit on the inside edge of one lip, but the oil blended it all together and you can't see it.

[@richardmabie3751]

Hi Carl, I have a new question today. The Doctors Woodshop Finishing Oil looks like an easy way to finish a project. Does it dry or does it have an oily feel. Does it wear or fade down in time and does handling it leave residue on your fingers? Can you put a glossy acrylic finish on it? the inlayed strip was great on the vase! Thank you, Richard Mabie

[@CarlJacobson]

Thank you Richard!! The Walnut oil will completely cure and leave no residue. You can apply friction polish over the top of it, but I'm not sure about acrylic finishes. It is an oil finish so it may need to be reapplied eventually, but it holds up very well.

[@LarryDMitchell]

Nice work. I've seen the inlay at my local Woodcraft store and glad you featured it here. I've used my parting tool for some detail work before but never thought to use the beading tool as an accent to the grove. I'm going to incorporate that into one of my next turnings because I think it just adds class to the design. A question though. For the CA over the inlay...did you spray accelerator on that or just let it dry naturally?

[@CarlJacobson]

Thank you very much Larry! I really think it adds a nice touch too. I just let the CA dry naturally sometime the accelerator can make it look a little white if you put on to much.

[@cookiescoop6065]

Very beautiful sir

[@CarlJacobson]

Thank you so much!!

[@philipguarino524]

Hi Carl, I'm doing a turquoise stone inlay on a piece of Osage orange turning, can you recommend what type of finish I should use because of the stone? Thank you, Phil PS searched the web and found '0'

[@CarlJacobson]

Hey Phil, I would go with a CA finish. You can build it up to cover up the jagged edges of the stone. Good luck :)

[@rsstnnr76]

Is starbond just glue? Does it run at all or lump?

[@CarlJacobson]

Starbond is a Cyanoacrylate glue. Yes it will run like regular glue if you put to much on. It's a fast drying glue, that's why it's good for projects like this.

[@tomcoker9882]

Neat idea for an inlay Carl. I like the oil finish. How many coats did you use or just when you wet sanded? Thanks. Cheers, Tom

[@CarlJacobson]

Thank you very much Tom!! I just use the oil when I'm sanding, but if it soaks in I put a little more on.

[@adrielvilla805]

info on that chuck please.

[@CarlJacobson]

Here's the link amzn.to/2VzB8ne

[@adrielvilla805]

thanks👍🤟

[@spindlesworkshop9744]

nice vid

[@CarlJacobson]

Thank you!

[@SandiRose2008]

Please excuse me for sounding stupid but I don't understand what the piece is for. I think it's beautiful but I don't understand the small hole at the top. Is it a vase for a flower or maybe a candle? I'm sorry, I don't understand. I think this is the first time I can't figure out what the piece is.

[@CarlJacobson]

Thank you Sandi! It's a vase, or also known as a hollow form. You can put dried flowers in it too, but it's mostly used for display :)

[@robertevans6481]

👌