Woodturning | Maple And Walnut Urn

[@glenmckelvey5952]

Very cool Carl love it . Hope you had a good weekend buddy take care.

[@CarlJacobson]

Thank you Glen I hope you had a good weekend too.

[@johnnyb95678]

Beautiful urn Carl. Thank you for walking us through your process.

[@CarlJacobson]

Thank you John!

[@MarklTucson]

Very interesting piece and turned out very neat. Really had to watch the whole thing to see where you were going after you drilled those holes. Quite unique.

[@CarlJacobson]

Thank you Mark 🙂

[@jackknows6509]

Great job there Carl. Be Safe and Be Happy! - Jack

[@CarlJacobson]

Thank you Jack!

[@davidmorgan7522]

Very different design for an urn. Not just traditional. Very nice Carl! Take care, Dave

[@CarlJacobson]

Thank you Dave!

[@CarlJacobson]

Thank you Dave!

[@kgwoodturning]

Beautiful! Thanks for always sharing these amazing pieces Carl and the process!

[@CarlJacobson]

Thank you buddy!

[@wardwilson3216]

Super nice. Carl

[@CarlJacobson]

Thank you!

[@PhilAndersonShadyAcresWoodshop]

Very unique and cool, Carl! Love it! 😀 Phil

[@CarlJacobson]

Thank you Phil!

[@cortlandhunt4721]

Very cool Carl! Really unique. 👍🇺🇸

[@CarlJacobson]

Thank you!

[@JordanWoodwerx]

Very cool Carl! I need to get back on the lathe, shoulder is feelin better! Sweet looking urn brother!👍🏻👍🏻

[@CarlJacobson]

Thank you brother! You need to get back at it. We need to see some more stuff from you 🙂

[@williamellis8993]

I hope it feels better soon, Bruce. Bill

[@JordanWoodwerx]

@@williamellis8993 thank you Bill!

[@Itasca57]

Thanks Carl and Robin!

[@CarlJacobson]

Thank you Matt!

[@alangibb3100]

Carl what a fantastic project it turned out really lovey, well done.

[@CarlJacobson]

Thank you very much!

[@glencrandall7051]

Very well done Carl. Really nice design. Very innovative. Wood selection and finish is outstanding. Thank you for sharing. Have a great day and stay safe.🙂🙂 Have a good time in Portland. I cannot attend this one but will see you at SWAT.

[@CarlJacobson]

Thank you very much Glen!

[@LewisKauffman]

Thanks, Carl! Love the design and choice of species.

[@CarlJacobson]

Thank you buddy!

[@booyaa1851]

Nice job 👍

[@CarlJacobson]

Thank you!

[@kennyboswell5967]

Beautiful piece sir.

[@CarlJacobson]

Thank you!

[@brettgl21]

That is really cool!

[@CarlJacobson]

Thank you Brett!

[@mikedoyle5362]

Great project Carl. Love the concept.

[@CarlJacobson]

Thank you Mike!

[@tomburns7544]

Wow. I love this unconventional design. Nice job, Carl!

[@CarlJacobson]

Thank you Tom!

[@spirits33k3r]

Great job Carl! You always come up with interestingly designed projects.

[@CarlJacobson]

Thank you very much!

[@rodmiller8617]

That’s gorgeous Carl. Love it

[@CarlJacobson]

Thank you!

[@DougMilleratWoodSpunRound]

Great project. Lots of imagination going on here. Thanks for sharing.

[@CarlJacobson]

Thank you Buddy!

[@magrinney]

Nicely done, Carl. I don't know why the wood turning world has been slow to adapt to the Easy Wood chucks, but i love mine. To me they are a no-brainer. I own about 3 or 4 of them. Changing jaws is a breeze. I'd rather be woodturning than screwing and unscrewing jaws on the other brands.

[@magrinney]

Also, the one time that I needed service on a chuck, they were more than acommodating. Just great customer service.

[@CarlJacobson]

Thank you! I'm not sure why not either I love mine and wouldn't give it up 🙂

[@J94-h8w]

👍NICE JOB

[@CarlJacobson]

Thank you!

[@MrJpocreva]

Nice work.

[@CarlJacobson]

Thank you!

[@jackthompson5092]

Pretty neat Carl.

[@CarlJacobson]

Thank you Jack!

[@dtork47]

Truly a nicely done piece! Thanks again for the great ideas and videos! Stay safe.

[@jpwoodwork]

Noice! Thats some awesome walnut

[@CarlJacobson]

Thanks buddy!

[@snturner10]

Very nice. I'm going to try that.

[@CarlJacobson]

Thank you! It's a fun one

[@johnduffant9694]

Outstanding you motivate me to try new things. I’ll be happy if I ever get to1\10000 of your skill level.

[@CarlJacobson]

Thank you John 😊

[@CarlJacobson]

Thank you John 😊

[@erinmcgrathejm4985]

Love the contrasting wood

[@alandisomma-od5fz]

Very kuhl! Love it Carl.

[@CarlJacobson]

Thank you Alan!

[@vernsteinbrecker3759]

Nice job, really like how it turned out

[@CarlJacobson]

Thank you!

[@d.mushroomhunter3528]

I guess what I ordered isn't burl..? looks like it it's probably Claro..😊 table leg blanks from an exotic wood place

[@2spoons]

Hey Carl I have't been on your post in ages.... KZbin does this (hides people you subscribe too) and lovely piece, very interesting to see you approach so many bits to this that some might not notice.... great effort #Carl Jacobson @Carl Jacobson

[@CarlJacobson]

Thank you very much! Yeah KZbin does the same thing to me. I've been subscribed to people for years and have to search for them.

[@sapelesteve]

A very unique piece Carl! Terrific job on that Urn! Hope that you guys are doing well! 👍👍

[@CarlJacobson]

Thank you we're doing well how about you?

[@tompuskar4426]

nice piece, Carl I really like the continuity of the two walnut pieces as the appear to go through the urn. One thing I noticed was during some pars of the video you appear to be wearing open-toed sandals. This would be a definite no-no at our club as we consider it a safety hazard. Just thought I'd point it out..The turning isn't the only thing some of us notice on you videos. I hope Portland was fun.

[@CarlJacobson]

Thank you Tom! Yes I think I was wearing sandals at one point. This took me a few days to make I was in and out of the shop a lot. 😐

[@williamellis8993]

That's nice, Carl. I'm guessing you had to chase Robin out of the shop when you did the walnut. Bill

[@CarlJacobson]

Thank you Bill! Yes I had to quarantine her 🙂

[@marcp4514]

Very nice. I would like to add some carving to my practice and this is inspirational. A question about installing the rings when grain pattern is important to maintain. I have a box turned to the point of putting the rings in and my first thought was the glue align the lid and body and glue the rings in place while tightened together, but I am nervous that I will end up with some glue in the threads. Have you figured out a good process to keep the grain pattern aligned?

[@CarlJacobson]

Thank you very much Marc! You're right, just put a little epoxy on the rings and turn them until the grain aligns. I normaly epoxy one side and let it dry and then the second one will spin a little to align your grain. Give me a call if you have any questions, my number is on the Niles Bottle Stopper website.

[@patrickmoran2489]

Hi Carl, nice urn. I am wondering how many cubic inches you've got inside your urn ?

[@CarlJacobson]

Thank you! I'm not sure I didn't measure this one but it's pretty small.

[@kbtreefrog5653]

Cool project! Got a question for you? I started turning duck calls. Good Fun! I’m in an area with a lot of great duck hunting so I’m gonna try to sell some. On average what do you or others charge for a duck call I’m sure region and materials make a difference Just basic price would help. 🤷‍♂️ As always Thanks! KB

[@CarlJacobson]

Thank you! It's been a long time since I sold a duck call probably at least 15 years but I was selling mine for $45

[@kbtreefrog5653]

Thanks Carl I just got 50 bucks for my first duck call 🥳 It helps with my hobby/obsession! 😇🤷‍♂️

[@MANJITSINGH-ko2oi]

WELDONE CARL beautifull.

[@CarlJacobson]

Thank you!

[@JakeThompson]

🦾🦾🦾🦾

[@CarlJacobson]

🙂

[@davidshaper5146]

You could have saved some time with a spokeshave.

[@d.mushroomhunter3528]

Very strange you came out with this video today!! 3 days ago I ordered a block of Walnut burl. I recently had a liver kidney transplant and had been faced with reality/mortality. Anyways I plan on making as many little urns as I can for my friends and family. In case things go south.🤔🫡🤠

[@d.mushroomhunter3528]

PS. I think I should get about 10 or 12 maybe on 3 in tall

[@CarlJacobson]

I hope things don't go south how are you doing?

[@d.mushroomhunter3528]

@@CarlJacobson oh I'm doing excellent I'm 52 but I'm back in school to become an EMT so I can pay it forward somehow. I got a young ladies liver and I'm hoping to someday prove to her parents that they made the right choice!