Woodturning: Not enough corners! 😳

One cube becomes a vase with 6 wings and 3 feet!
Thank you all so much for watching! Yes, another month rolls by and my hopes for a quicker project turnout were dashed... but that's my life right now. On the bright side, I got a new camera after the old one stopped focusing on objects more than 5 feet away. Let me know if you like the new picture!
This is my 29th filmed project. I had been wanting to try another cube theory project, but the amount of wasted wood from the typical cube turning drives me nuts. So, I chose to waste resin instead... literally. It started with a horrible miscalculation, in which I mixed exactly twice as much resin as I needed, and when I realized I had a bucket of resin left over and a ticking clock, it was too late to do anything about it. In fact, I tried mixing in more pigment and before I knew it the mixer pulled out a glob of curing resin. Check out my Instagram (@adamsen_woodcraft) for the pic. Anyway, the project went fairly easily until I decided to use lacquer as the final finish. Well, it's getting too cold in Maine for lacquer to cure properly, and it got somewhat cloudy. I don't think the final finish is horrible, but it isn't ideal. I simply ran out of the time and patience required to fix it.
Again, thank you all for watching. I appreciate your comments, even though I can't respond to all of them. You are the best audience anyone could wish for!
THANKS to Starbond you can now get 15% off all Starbond products with the promo code ADAMSEN15: www.starbond.c...
Cheers to all! Let me know your thoughts by commenting below!
If you're new to the channel, please consider subscribing! Also, please like the video and comment, letting me know how I'm doing and what you'd like me to make next. Getting your feedback really helps to promote my videos and channel, and I always love reading and responding!
Frogblanks.com has generously provided a 15% discount (not combinable with other offers) if you use code "YT-DAVID". Use that code and it will help me out too!
If you're interested in my other projects or contacting me for a commission, check out my website:
www.adamsenwoo...
All of the music used in this video came from:
www.epidemicso...
Thanks again! Cheers!
Products I use:
Minwax wood stabilizer: amzn.to/3RICKWu
Starbond Clear Thin CA glue: amzn.to/3z0sZdz
Starbond Clear Medium CA glue: amzn.to/3Bb6aqr
Starbond Clear Thick CA glue: amzn.to/3oqiXxE
Starbond Medium Brown CA glue: amzn.to/3PPUIUW
Starbond Medium-Thick Black CA glue: amzn.to/3IWDYsY
Starbond Activator: amzn.to/3v9r8Ca
TotalBoat Penetrating Epoxy: amzn.to/3zr1MSH
TotalBoat Thickset Epoxy: amzn.to/3PtTkrw
TotalBoat Tabletop Epoxy: amzn.to/3oke5tQ
Mylands cellulose sanding sealer: amzn.to/3cd0BgF
Mahoney's Finishes Walnut Wax: amzn.to/3IzSBT5
Mahoney's Finishes Walnut Oil: amzn.to/3Puc61l
Turntable for glamour shots: amzn.to/3yH4AcO
Easy Wood Tools Carbide Cutter: amzn.to/3z6E6Db
Easy Wood Tools Carbide Cutter (negative rake): amzn.to/3yH6JVN
Beall buffing system: amzn.to/2BC90YG
3 inch Sanding Disks: amzn.to/2Zc6ccY
Makita right angle drill/sander: amzn.to/2A54CkB
My favorite finish (Mahoney's Walnut products): amzn.to/31uM88z
Pyrography Pen: amzn.to/2G5HJwU
Carter & Son 5/8" Bowl Gouge: amzn.to/2G5YV5g
Crown Diamond Parting Tool: amzn.to/2NIqsOj
Tormek T-8 Sharpener with Woodturners Accessories: amzn.to/30D2iKA
Five minute epoxy: amzn.to/2udSavt
My camera: amzn.to/34Ef0Mo
My microphone: amzn.to/3APkRPM

[@thesupremepotato7850]

alternate title: man makes a cube and then makes it not a cube

[@parasitehenry9338]

Y e s-

[@existentialopal721]

Boom

[@rutkatabg5634]

cuben't

[@n2daair23]

Another alternate-FUKIN AMAZING, AWESOME SKILLS!

[@АлевтинаМ-с4и]

Lol))) it was a large cube and become a small adorable...no-cube))))

[@joshuapinkney3325]

I never thought I would find myself going down the rabbit hole of watching woodturning KZbin videos but the pieces I have witnessed on your channel have been nothing short of spectacular!

[@ratslayer110]

It's awesome ain't it! I want a lathe so bad...lol

[@danielwhitley6696]

Same here. I'm hooked on these videos

[@dia4387]

Yeah

[@helpfulliving]

With other turners I can usually figure out what they are doing and how it will turn out. Your work is quite different. I can never seem to work out what the finished project will look like. That is not a complaint but a complement. I love your work and I love waiting until the end to see what it is that you've done. You are wonderfully creative. I tip my hat to you sir!

[@srdavis37]

Exactly! I watched him do it, yet I still don't know HOW he did it!

[@ladyjustice7]

Exactly! The mystery of it is wonderful. Completely worth every moment of suspense.

[@nomadine85]

Advert in the middle of a wood turning video: enjoy a beautiful outdoor Japanese park without leaving the US! Me, in Germany, during a pandemic lockdown: I don’t think I’m quite the target audience

[@monstrosity_01]

Me, in Poland: huh, same

[@lefotografion]

Denk ich auch jedes Mal

[@dtavs_exe]

Me in El Salvador: same same

[@rstone7727]

Get "Brave"... Stop watching ads...

[@andrewoldham4462]

I don't think it really matters were we all are in the world when there is amazing wood turning like this to be watched. I myself I am in the uk not even half way though a 12 hour night shift and I can safely say watching talented guys like this is definitely the thing to do to pass the time away. I know things are apparently getting better but wherever you are stay say everyone

[@lesleyyoung5730]

Just when you thought you've seen everything that's come off a lathe, you stumble across this gem. Uniquely beautiful!

[@DavidAdamsen]

Thank you!

[@adamnapples8920]

Another cinematic and artistic masterpiece...absolutely stunning, my friend...very much enjoyed the watch!

[@WizardofGOP]

Way to appreciate it, Lesley.

[@manman2anti]

It’s time for the unexpected. We in the age of Aquarius ♒️ .

[@IICubeII]

One of the most dangerous lathe projects I've ever seen. Clearly you know your tools!

[@lashay6364]

The more he cut it down...the more I was like “nooooo, it looks good the way it is” but the finished product was worth the anxiety lol

[@554drago]

I’m so glad I wasn’t the only one going through this anxiety 😂

[@AvengerDK]

Just like watching any Bob Ross episode.

[@craignapoli]

DITTO To That!!!

[@cblade007]

I screamed nooooo like three different times until I just let it go.

[@samp-w7439]

I felt the exact same way

[@sylviecharlois1165]

I am completely in awe. To be able to "see" where to cut when the spinning blurs the shape so that it looks you're cutting in nothing... It is simply awesome, how you must see the final shape in your mind... Beautiful... It's more than craftsmanship, it's pure artistry.

[@alexeyp8028]

Collect wood shavings separately from different types of trees. Backfill in layers or whatever you want, fill with epoxy, make a vase or lampshade or something else

[@rogerboucher1913]

I was just thinking the same thing! Please show us what you can do with chips and flakes !!

[@traceyevans215]

This was the most beautiful piece I have ever seen turned on a lathe. It made me wish my mom was still alive this was the epitome of her kind of art. My parents home was filled with it. When she saw something that caught her eye, like I know this would have, she bought it no questions asked. 💙🤍🖤💙🤍🖤

[@stevenclark2188]

That cube might be one of the most viscerally terrifying things I've seen turned on a lathe. Maybe it's the corners moving so rapidly?

[@imaginewagons3777]

My gut is telling me to put my hands on it as it spins.

[@AriosQarsute]

@@imaginewagons3777 your gut, sir, does not have your best interests at heart.

[@myamaryca1015]

This may be the most beautiful piece I have ever seen done on a lathe. Your work is nothing short of inspirational.

[@uniqko]

This is amazing 👍

[@kenziestieward07]

Hai

[@Necrikus]

I have no idea why this was recommended to me, but it is certainly fascinating to watch.

[@Itz_DabigKO]

Dude... This has to be the coolest, most beautiful thing I've ever seen come off of a lathe!

[@l.nassah6728]

By far... The most complex type of wood turning I've seen. From a cube to a 3 sided dual layer which is also another 3 side and then another 3 side and then a circle.... Yep I also got confused. I'm admiring your level of experience and visioning to see this kind of piece of art from a cube! Well done sir. Salute to you

[@SusanneMilewski-b3q]

Your artistic ability blows my mind! I can’t fathom how you envision and execute such creative perfection. Absolutely outstanding piece and your videos are amazing! I thoroughly enjoy watching.

[@DavidAdamsen]

Thank you so much!

[@RobBread1]

I was so hypnotized by the whole process and awaken at the end to witness the beauty of your product. Amazing.

[@DavidAdamsen]

Cheers Rob!

[@lynnwayne6132]

This piece (vase?) is spectacular! Do you sketch out your work ahead of time or just look at the wood & see what’s waiting to come out?

[@melindashepard7046]

This is a very unique piece it’s gorgeous. When you start with turning do you have an idea of what you’re making inside your head or do you just do it as the woods turning?

[@thalastianjorus]

The proper answer to your question is: "Yes." I cannot speak for the artisan here, but atleast for myself with both wood and metal work - you often start off with, atleast, a basic idea of what you're going for. That said, nothing is ever _perfect,_ and often a whole new idea will form mid-way through the early stages of a project. However, at least for his needs, I would have to assume that he is setting out with a plan in mind. He moves with too much initial purpose to be winging it, and settling on a design that begins to form out of, basically, dinking around. It's pretty easy to get lost along the way in an unplanned project, and end up with something quite beautiful when you are finished - however something that even you did not intend when you set out. Unless he is simply cutting past a great deal of standing around, staring at the lathe, scratching his head wondering what on earth he is doing? He has at least a basic plan from the start. As he _does_ edit out his taking of measurements I guess it is possible, but fairly unlikely. You'd want to have a goal in mind if recording it. Some of the wood he uses is quite expensive, and you wouldn't wish to waste any if possible. If he is like me, a lover of wood, you wouldn't want to waste any _anyway,_ and even if you meander down a rabbit hole of new ideas as you work - at least you HAD a workable idea to start with.

[@StanCrafted]

Another cinematic and artistic masterpiece...absolutely stunning, my friend...very much enjoyed the watch!

[@margaretdavis5695]

So strangely beautiful. I don't know how your mind can conceive such a creation, from a block of wood and resin. I heard about your fall (from Kim Tippin) and I would like to lift you up before God, and ask that you be fully healed of your injuries, in the name of Jesus. Amen. God Bless you and keep you, David.

[@mickberry2651]

Are you freaking kidding me!!! That was totally unexpected and seriously beautiful! Can't wait to see more amazing projects from this site!!!

[@arnaldorentes5371]

I only know the difference between art and crafts when I see it. You do ART.

[@GlyphicEnigma]

This piece belongs in a freaking art museum, THATS how good it is!!!

[@VeryPotato.]

I agree it should be preserved. I believe it should be shown what will be considered old craftsmanship in 100 years.

[@Leekodot15]

When I realized that cubes have 8 corners, I went full on "hold up." Why am I surprised it exists though

[@Leekodot15]

Update: *Oh.*

[@MrAdannor]

Hah yeah, that threw me for a loop too. I watched through the whole thing and still was "wait how did it go to three corners" before going back and noticing that the offset did that.

[@silverlady1118]

You may not be totally satisfied, however, I think this is a stunningly beautiful piece of art. Your designs are always interesting and would start conversations I appreciate you sharing your journey on KZbin and always enjoy your videos Thank you for sharing 😉

[@DavidAdamsen]

Cheers! I really appreciate that! ✌️

[@_Solaris]

This looks like a particularly dangerous piece of work on a lathe.

[@DavidAdamsen]

It definitely can be dangerous, but if careful it’s not a whole lot different in theory than any typical turning process.

[@traceyrice]

David, I think you've broken my mind with this one. Watching a cube being morphed into this end project was amazing! I love it! 💜

[@FromTheHeartWoodMK]

This is truly an amazing piece! I'll admit I skipped to the end after the first few minutes because I simply couldn't conceptualize what you were attempting to do, then after I saw the result I went back and watched the whole thing! Really cool and some truly amazing and advanced technique you showed in getting that result, well done!

[@graydog6284]

Very much appreciated the video and your artistic vision. Just curious, how many design changes took place as the piece progressed?

[@zoehigel4548]

This is amazing, beautiful and inspiring! I heard about your accident and you are in our prayers for a speedy recovery. You are a true gift to woodworking and art.

[@acemaker2002]

Stunning. I could not comprehend the outcome of the piece as you were making it.

[@vitrums]

"Thanks for watching" - No, thank you for doing, what you're doing and sharing it with us!

[@kirafoxwell9664]

I literally just watched you make this and I'm still like ".... Witchcraft!!!!"

[@GulliJ]

Hi from France, this is a very very uncommon state of the art design! Very well done! Good job! With a very few little mods in the process you could obtain a higher designed and finished model who could pretend to be exposed in the best placed of design in the world. You are almost touching to the sky ! So nice to see that !👍❣️

[@fear_toxin]

someone else mentioned it, but the parts where it seems like you're shaving through air? breathtaking. this entire video is enthralling to watch -- you're clearly a master. phenomenal craftsmanship!

[@ryanhunt9977]

Thank you dirk, very cool!

[@BiigDaddyDellta]

Can't even believe this, this piece kind of made me emotional. Your art.. it's just incredible, man.

[@alythyslarielfrost8068]

This is definitely one of the most stunning pieces I've ever seen. Thank you for sharing it with us!

[@sharonolsen6579]

UN believable !!! This is stunning ! Not only are you an extremely gifted wood turning artist .. but a talented film maker as well .. Blown away ... !

[@mamm7223]

Holy moly! How did you do that? How did you even THINK of that? That's not just wood-turning, that's not just great craftsmanship....that is ART! That is the most unique, creative, and gorgeous pieceI've ever seen. Kudos, sir!

[@DavidAdamsen]

Thank you! ✌️

[@notquitehadouken]

the part where all the stuff is flying everywhere just looks like the inside of a reactor

[@harryparmley1193]

Bless you for stopping now and then to let the rest of us spatially-deficient get an idea of where you are going..! Truly a piece to have rather than use..!

[@Lynn.Lawson]

That piece is exquisite! Unique in form and design. I love to see artists think outside the box (no pun intended). 👍❤

[@scottfarnham2717]

That is amazing! I never would have guessed when you started, that it would've turned out like that. Nice!

[@DavidAdamsen]

Thanka Scott!

[@akoww1000]

wow, never seen anyone come close to making something like that by woodturning.Sub'd

[@JohnMiller-pu2qx]

Morning David, well that was fun I bet to turn!!!....going to have to start calling you “ Picasso David”!!!...all kidding aside, that is a beautiful piece of art and work you did. Great design and color choices to compliment that maple burl. Good casting job, and with that was glad to see you finish it off the way you did. Amazing work David. Keep it up my friend...👍👍 John Miller Custom Woodturnings

[@BraboRacing]

my friend, just incredible. what a magnificent job. if i saw one of these i would buy it on the spot.

[@user-ky2vl2wm3j]

That was a legendary display of skills. Hats off mate 🙌.

[@333stalker]

Amazing skill, but what happens to carved out parts? Pretty sure they not reusable.

[@slashwhatever]

That's one of the best, most unique turned pieces I've seen. Amazing work.

[@jarmstrong2843]

Wow! The resin adds a whole new dimension to the wood and I really like what you did for the base. Last week I turned a bowl just like this out of cedar. But, I turned the bottom flat. I wish I had seen this video to do the same. And, I did not use resin. Now, I need to look at doing another bowl using resin. My cedar bowl is just a hunk of wood that looks nice, but yours is much more interesting. Thanks for the new idea and inspiration. I’ll send ya pictures once I do another in the next few days. Now, off to Dallas to buy some resin. BTW...I still standby my past comments that you are definitely turning into one of the premier wood turners. You always turn something interesting. And your video intros are wonderful. God has blessed you with some nice talents. I am happy to see that you are not letting them go to waste.

[@ItzFridayz]

My head hurts tryna figure out how that used to be a cube

[@jlyssagraywolf7503]

Absolutely stunning beyond words. Did you know that it would turn out like that or were you just winging it?

[@joycemiller6188]

wow, that is so awesome! thank you for sharing your art.

[@richkeelan1312]

Absolutely Gorgeous wow I really enjoyed watching you create this Beauty the color and the burl are amazing Great job

[@DavidAdamsen]

Thank you Rich!

[@t2miles]

Oh my goodness. Beautiful. Thank you for sharing.

[@prsearls]

Fantastic art. I love seeing this in real time. Your precise and delicate cuts are very informative. The videography, editing and soundtrack are also the best. It's a wonderful pleasure to watch your craftsmanship and art.

[@sunset_irises]

Your videos are so wonderfully soothing, and the products you create are lovely. I feel your sound design really deserves commendation, because you've picked the music choices well, and you found a wonderful balance for the sound of the lathe. Most other woodturners, the sound of the tools against the wood is grating to the ear, but you've managed to find a sweet spot with it. (All that, and you have notably sexy hands, but that's secondary to the quality of your work.)

[@ilovemydog6847]

This is so completely beautiful. You have such an amazing talent. Thank you so much for sharing it with us 😊❤️

[@Dennis-ye4kf]

Wow, that's different, and beautiful !! Nice job David !!

[@carlspringle9342]

As always David your turning is absolutely beautiful. Such a beautiful piece. Gorgeous, Gorgeous, Gorgeous. I always look forward to your next turning project.

[@DarkVoidIII]

I would never have guessed that the original shape that masterpiece came from was originally a cube! :D Very well done!

[@cherylcowden9676]

At a loss of words. Excellent workmanship!!

[@haraldolsen8313]

Amazing work, turned out beautiful..:))

[@vjones9606]

Thank you for showing us this beautiful piece of craftsmanship. Once again I am just stunned!

[@shanharlmall]

I get nervous with a perfectly round log..this is another level of crazy.

[@joycecarter4597]

That is absolutely STUNNING! You are truly amazing sir! This should be in an art gallery! I've never seen anything like this.... thank you for allowing me to enjoy the making of this masterpiece! 😊❤👍

[@rondacker]

What a great mind bending project! Love the thought process. Looks great!

[@davanders2006]

I'm not able to come up with a single word to say how much I love this piece.👍👋👏👍

[@DavidAdamsen]

Thanks David!

[@jeffrichter5735]

Carving beautiful wings that are barely a blur to the eye that accurately is amazing craftsmanship. This piece should be in a museum to help inspire everyone in the ability of the human spirit. Absolutely amazing ability...

[@trumpanzeeslayer4036]

Why would anyone downvote this?

[@collintoews2312]

@@trumpanzeeslayer4036 every party needs a pooper

[@tchorbus2133]

You know why 😂

[@ЗДРАВОМЫСЛИЕ-г7п]

Сериал роликов Разговор с Богом ЛУНОЛОГИЯ Гармония с собой kzbin.info/www/bejne/l4LHhYqBjL11jg Часть5 kzbin.info/www/bejne/aKenXqeid8aqmaMд Цикличное. Время! kzbin.info/www/bejne/jmaUen-ta9SHbqs Человек.Начало. Разговор с Богом! kzbin.info/www/bejne/bZzbpWSorLKUp7s Человек. Продолжение. Разговор с Богом! kzbin.info/www/bejne/fH-Zn6aIjbCiack Человек. Завершение. Разговор с Богом! kzbin.info/www/bejne/iJKliXygYtWrrsk Введение youtu.be/ SOJOOz4p9F Понятие о Рае. Продолжение. Разговор с Богом kzbin.info/www/bejne/n3nVeKyKht-KqNk Понятие о Рае. Завершение. Разговор с Богом kzbin.info/www/bejne/oX-wo2eFppd-oc0 Понятие о Рае. Начало. Разговор с Богом kzbin.info/www/bejne/q3OYmpJ_eKitrpo Часть6 kzbin.info/www/bejne/gYLEc2acjMSLmMk Часть Вторая kzbin.info/www/bejne/rpLMdn6Zg9FgsLs Эволюция. Начало. Разговор с Богом!!! kzbin.info/www/bejne/jXzLoa2Bi8SXoK8 Эволюция. Продолжение. Разговор с Богом!!! kzbin.info/www/bejne/omaplXWkmcZ6mrM Часть 3-я. Вера kzbin.info/www/bejne/h6OTk6GPeM5mhq8 Четвертый Лунный день! kzbin.info/www/bejne/kKLVpa2wg6umZ7c Третий Лунный день!!! kzbin.info/www/bejne/a5yaop9thqp_gNE Часть первая kzbin.info/www/bejne/qH-vqYGkmJJqnNk Начало. Второе Пришествие kzbin.info/www/bejne/gZLTpquXfrp8rpI Продолжение. Второе Пришествие kzbin.info/www/bejne/m2XZZ3SchL52hrs Второе Пришествие Заключение kzbin.info/www/bejne/hJvdYZt-oLGKrdk Часть десятая. Разговор с Богом. Продолжение kzbin.info/www/bejne/gGGvdKGtfNp7pas Часть восьмая. Разговор с Богом. Второе Рождение! kzbin.info/www/bejne/iabUp2WngLGoZ8U Часть11-я. Разговор с Богом. БогояяПОЗНАНИЕ kzbin.info/www/bejne/bWW2YmiCntp1nMU Методика моделирования дня kzbin.info/www/bejne/rXrRgaSPrJyVfsk Чвсть10-я.Разговор с Богом. Заключение kzbin.info/www/bejne/jnqveHqHl9d0jKM Часть девятое. Продолжение.🌈 kzbin.info/www/bejne/sKG6e2umobhjgNU Часть четвертая kzbin.info/www/bejne/nZ6Vpp16fLCLe6M Часть четвертая Окончание kzbin.info/www/bejne/m4Kzlmadoa-Dr7M Разговор с Богом Часть7 kzbin.info/www/bejne/qoS0mGiAnZaga68 Часть восьмая. Окончание. kzbin.info/www/bejne/h3-6aHacj6pgb9k Часть девятая. Разговор с Богом. Возвращение в Рай! kzbin.info/www/bejne/jp_Ci6yIfLllg5Y Часть девятая. Продолжение kzbin.info/www/bejne/jp_Ci6yIfLllg5Y Часть девятая. Завершение kzbin.info/www/bejne/Y4uadKWYd8iLjM0 Часть десятая. Разговор с Богом. Начало kzbin.info/www/bejne/qpOngJuwnqaFqrc Продолжение. kzbin.info/www/bejne/mYjUZJSMZ6qpnZo Заключение. kzbin.info/www/bejne/bpycYap6iM9ppK8 Мировоззрение "Планетянин" - альтернатива ныне действующим мировым порядкам Золотой миллиард Глобализм kzbin.info/www/bejne/Z2iqh6lreJKjnqM **Разговор с Богом!!!* Часть десятая. Разговор с Богом. Начало kzbin.info/www/bejne/qpOngJuwnqaFqrc Часть7 Окончание kzbin.info/www/bejne/bJ7VgZKHfNSeaZY

[@charlesball8872]

Okay David- I gotta know: Did that shape come to you in a dream, did you preplan and draw out the design, or Dis it just “happen”? I gotta say that first of all, it’s quite lovely, and I dearly love the geometric Lines involved! I follow quite a few turners on “the Tube” , you and a couple of others I truly and eagerly await your weekly projects! The others are just - there, if you get my meaning...... anxious to hear your reply!

[@DavidAdamsen]

Thanks Charles! I appreciate that! I have experimented with this concept once before and seen other cube turnings on the Tube, but it always bothered me that so much wood was wasted in a simple 3 winged bowl.

[@BEElaine1008]

@@DavidAdamsen yes, it. Sad to see so much beautiful burl go away, but still, a wonderful piece

[@hannahstraining7476]

I love the unexpected. I'm a weaver, and the grid-like structure of threads on a loom does not want to produce curves, so that's what I love to do: make curves on a loom. Here is the polar opposite. A lathe doesn't want to make corners and angular wings. But here you've done just that. And what glorious wings!!

[@gavincoyle]

David that is just absolutely gorgeous, its a beautiful piece of burl and the epoxy is just out of this world 👍👍👍

[@UCvow2TUIH0d2Ax2vik9ILzg]

Jesus christ, this tool looks beyond dangerous.

[@lynx50187]

That's an incredible outcome, well done

[@jedtaylor3551]

Dave- you said that you were just starting with epox....next time you cast coat the wood with clear base epox for enough time for the epox to start or tack up..keeps the bubbles from coming out into your resin and they will go out away from the covering resin surface.....same problem with any wood / resin cast.......only takes about 45 minutes and no effect on the bond

[@lindahebb9690]

Absolutely mind boggling from start to finish. Beautiful job.

[@arletteheme8472]

Just BEAUTIFUL !!!!!!! I should like it better in a "abat-jour " ? Keep on...

[@ssFacun]

FBI: *(Read the title)* ... emm wait what how is that possible

[@pauleywog73]

Freaking awesome brother That is amazing technique. Thanks for the inspiration. God Bless

[@DaliwolfBacon]

This was an ambitious undertaking and the results were just AMAZING!

[@Eztli__Void]

Me through the whole thing: it's enough corners. That's good. It's enough corners. You can stop. The end: glad you didn't stop

[@adamnapples8920]

Okay David- I gotta know: Did that shape come to you in a dream, did you preplan and draw out the design, or Dis it just “happen”? I gotta say that first of all, it’s quite lovely, and I dearly love the geometric Lines involved! I follow quite a few turners on “the Tube” , you and a couple of others I truly and eagerly await your weekly projects! The others are just - there, if you get my meaning...... anxious to hear your reply!

[@DavidAdamsen]

Thank you! I had the concept in my head and was trying to get a way to use more of the shape rather than going for just 3 corners. I appreciate your support!

[@locktl1740]

Maravilhoso. Nunca vi trabalhos tão ótimos. Parabéns. Queria todos.Cida Oliveira. Brasil.

[@JackJester21]

Wow that is beautiful! I always love the stuff that comes off when someone puts resin on a lathe

[@SW-fk6jk]

How TF could anyone not like this?? Too many trolls out there!

[@DavidAdamsen]

Lol, it doesn’t bother me.

[@mosbo_07]

Wow man so much of hard work you are so freaking cool🔥

[@trigophers]

this guy was seriously cutting some corners

[@gordonarthurmerriman]

Stunning

[@designabeej]

WOW 🤩 Absolutely stunning piece 👏🏼👏🏼👏🏼

[@eyemalmostthere]

Now that's how to spend time in lockdown! Beautiful!

[@2007crf450r]

man iam so glad you didnt just turn this into a bowl or a cup beautiful work my friend

[@terezadecastro5350]

Espetacular fantástico sem palavras abraços de SP Brasil

[@deborahgwinn5736]

I am speechless. Unique, stunning, amazing, I could go on and on. Love the videos, but more importantly I love the pieces. XO

[@Umberto.Goglia]

When woodturnig becames Art, David is there! Regards from Italy

[@DavidAdamsen]

Thank you! ❤️

[@clivetuffrey3628]

Wow ! Mind blown ! To have the ability to see that within the cube and artistry to bring it out. Brilliant ! Well done !

[@mattdorrell9567]

Without doubt, the most incredible and most beautiful creation I have ever seen leaving a lathe. The forethought, the design and the absolute steady handed craftsmanship that went into this blows my mind. At every stage, I thought WOW, leave it at that..then you just kept excelling yourself! I felt myself sweating, the more fragile it became, thinking one little slip now could be disastrous! Outstanding work. Well done, Sir. Well done! 👏👏👏

[@DavidAdamsen]

Thank you Matt!

[@kermitisanarsonist2046]

you should make a top (the spinning toy) out of something like this maybe like a wood and epoxy top?