Bosch Glide vs Festool Kapex

Watch our latest video : "From Old Firehouse to Woodworking Wonderland | Shop Tour 2024"
• From Old Firehouse to ... -~-
Over the past year you may have noticed some changes in my tool collection, including trading my Festool Kapex for a Bosch GCM12SD Glide Miter Saw. If you're looking for a little background information on these changes, check out www.thewoodwhis...
Since that time, I've received numerous requests for a review of the Bosch as well as my thoughts on how it compares to the Kapex. As always, I don't consider myself a very good reviewer. I have no desire to do a feature by feature and spec for spec rundown commonly found in our favorite woodworking magazines. Instead, all I can offer is one man's opinion and a completely biased personal impression based on my needs and the type of work I do. So here it is!
Special thanks to my buddy Scott for bringing his Kapex over to play.
For more info, check out the post on our website: www.thewoodwhis...
Final Verdict:
The Bosch Glide is a great saw. It cuts well (especially with a Forrest Chopmaster installed), adjusts easily, and actually makes a decent attempt at dust collection. But the dust collection is a far cry from what the Kapex is capable of. I'm hoping with some modifications, such as the one shown here in my friend Dyami's setup, the dust collection will improve.
And while the Kapex is a great saw too, it's not "more than twice the price" great. The Bosch is about $600 and the Kapex is about $1500. As I see it there are two groups who probably should consider the Kapex:
Those who do on-site installs where portability, accuracy, and dust collection are critical.
Those who are obsessed with good dust collection.
Outside of that, buying the Kapex becomes a matter of "because you can" and not "because you should."
SUBSCRIBE!
www.youtube.com...
CHECK OUT OUR SHOP TOURS
www.thewoodwhis...
GET INSPIRED BY OUR VIEWER PROJECT LIBRARY
www.thewoodwhis...
DOWNLOAD OUR FREE APP
Android: bit.ly/1MQ4ks1 or iOS: bit.ly/177u4An
WIN FREE TOOLS!
thewoodwhispere...
DETAILED PROJECT COURSES
thewoodwhispere...
TAKE A VIRTUAL TOUR OF MARC'S SHOP
www.thewoodwhis...
SUPPORT OUR FREE VIDEOS
thewoodwhispere...
CONNECT WITH US!
Use our contact form: thewoodwhispere...
Twitter: / woodwhisperer
Facebook: / thewoodwhisperer
Pinterest: / woodwhisperer

[@bentcountershaft]

For the $900 difference I think I can engineer some clamping and dust collection. Thanks for the vid, Mark. I've been looking forward to this one.

[@sperreault]

The fact that everyone compares this saw to a Kapex makes me realize that, for the money, the Bosch is worth every penny.

[@bryangrubaugh4167]

I purchased my Glide 2 weeks ago, so I'm really glad you didn't point out a bunch of stuff wrong with it that I hadn't discovered yet.

[@donlebeau6049]

I have owned the Bosch unit for some time. It is mounted on a terrific stand that folds into a two wheel cart and offers a great solution for construction work - mobility, accuracy, great power, and long, extendable work support. In my shop, I wanted to upgrade my huge Delta 12" radial arm saw that was built into the center of a 20" long work bench. This saw was used almost exclusively as a rough cut saw that I only used for rough dimension to begin machining for a furniture project. Instead of using my Bosch saw, I bought the Kapex because I always love everything Festool. You did a great job of exposing strengths and limitations that I have found. The one very critical issue that I would add is that the unit is underpowered to be used as a "very precise cut-off saw". My old delta made an awful cut and was a little dangerous to use but it would plow through a 14" wide, 3" slab of hard maple like it was balsa wood. With the Kapex, I have to make a series of cuts at increasing depths and tend to burn the wood because it slows down as I run through the cut several times. The Kapex can fit in well as a precision furniture making tool to handle angled cuts of all types but not so good as a rough dimensioning tool as I typical use as my first step when bringing hardwood lumber into my shop. I still love everything Festool but I am going to take my Bosch off it's stand and mount it into my work bench replacing the Kapex. I will have to decide if this Kapex stays around for precision work or goes on Craig's list. Great review from the Wood Whisperer as usual. Thanks.

[@MWAWoodworks]

I think pretty much everyone would agree that the Kapex is a better saw. The question is, is it $900 better? Dust collection is definitely worse on the Bosch, but I'm pretty sure if I had $100 I could engineer the hell out of some good dust collection for this saw and still have $800 left over. Festool makes some unbelievable tools (Domino, Rotex, TS55), but the Kapex just isnt one of those.I'll take that money and buy a second Laguna bandsaw before I wasted that money on a chop saw. But to each his own.

[@christschool]

When you get into very difficult angled cuts is when the Festool shines. If you're just doing 90 degrees or 45 degrees, any miter saw will get you what you need. Of the of the cool features of the Kapex is the dead accuracy of its lasers.

[@christschool]

Paul Hopkins AvE is an idiot and wouldn't know how to even use a track saw. The track saw is more accurate than a cabinet saw when used properly and why would you need a big beefy motor when a track saw is used primarily for sheet goods? What you're paying for is the system and its accuracy. These saws last for years. The track saw is meant to be lightweight and accurate, which the Festool is. Dewalt also makes a fine tracksaw. AvE's video only impresses people that don't understand tools and what they are used for and for people that don't like Festool because they can't afford it.

[@christschool]

Paul Hopkins I think the best testimony for any tool is the collective voice of those who use them day in and day out. His comment about the 'proprietary cord' is a good example. To him, it was a negative. Those of us who use Festool products no doubt see the Plug It cord as a huge plus. I use one cord hooked up to my CT26 - all the rest of my Festool cords still have the wire ties on them. He didn't point out any "weak" items. He's an idiot that doesn't have the first clue about engineering, and tossed in a few fancy words in an attempt to "Baffle with Bullhockey". For example, if he had the slightest clue about ANY variable speed motors, he wouldn't have even hesitated upon noticing the magnetic pickup on the shaft for a Hall Effect sensor. It's standard on every variable speed motor for the past several decades!!! It's not new. It's not even a question. Yet he sat there and pondered it as though it may have been present to pick up stray metallic debris (like the magnetic drain plug on a car engine). Idiot! Then he goes off on the thermal melting point of the plastic housing. Huh? If your motor, any motor, hits 360 degrees, it's already GONE!. But this brainiac didn't even notice the 2 little red wires leading to the embedded thermistor in the motor housing....let alone what a thermistor actually is. The motor controller will shut down the motor long before it ever reaches 360 degrees, because the insulation on the windings can't withstand that high of a temperature. He was in awe about seeing balancing grinds on both ends of the rotor? Geez, where did he get his experience, watching someone balance wheels at the local gas station? Even a teenager at the gas station knows you balance both side of a wheel. What bloody idiot is going to try to remove a rotor without pulling the brushes? I was dumbfounded watching him yank on the motor housing with a screw driver. It wasn't until a minute later that he admitted to not pulling the brushes. Dust boot not withstanding, did he not suspect the brushes would also have to slip past the shaft bearing? Of course he was surprised to see spiral pinion gears...because he's an idiot. Does he not realize that is a major upgrade from a straight pinion gear? Those aren't cheap to broach! But they mesh a heck of a lot better and are a heck of a lot quieter, and there's a darned good reason why spiral pinon gears have been standard in automotive differentials for the past century. Think I've been hard on him? Not even close. I'd have that boy in tears if I had the chance to say what I think to him personally. He's that much of an idiot.

[@christschool]

Paul Hopkins Just be happy with what you have and be thankful. There is no reason to tear down someone that chooses a different tool from you and people don't need your permission or approval for what they like to use.

[@markclemmens2862]

@MWA Woodworks As a professional woodworker, I personally think the Kapex is highly overrated. As are most of festool's tools. I'm not brand loyal, I buy what I feel is the best; having said that, I own a lot of Makita power tools. I have an obsession with accuracy, and while Festool provides that accuracy, it's just overrated and overpriced. If I wanted to spend absurd amounts of money for accuracy, I would skip right over Festool and buy Mafell. Check out Ave's channel here on youtube, I believe he has disassembled some of festools saws and shown that they are in fact overpriced for the build quality. They use way too much plastic in my opinion and the tool weight just isn't there.

[@jaredklingler1287]

Hey Mark, Nice comparison vid! I have a miter saw with a similar clamping system. My solution was to JB Weld a 3/8 nut to the top of the clamp screw, and keep a dedicated nut driving bit next to the saw. I use my impact drill to tighten and release work pieces. Sort of goofy but it works well for me.

[@bwright79]

I have this Bosch saw, it's awesome I have had 2 other compound miter saws a 12" porter cable non-slide and another Bosch 12" slide, this is superior for sure. Also at the 5:40 mark, you know to get that clamp to fit properly you can slide the fence back and you won't have to worry about lifting it out of the hole as much FYI...

[@pc7082]

Great review. My Kapex has 10 years now and I just purchased the new Busch miter saw. Same reasons you explained in here. A few more things bothered me on the Kapex. 1- At the end of the week (lot of cuts) it starts to jamb when you pull it down and you have then to do a cleanup and relubricate. 2- as you mentionned, the non standard size blades, that costs a fortune from Festool. 3- the shorter longitudinal travel... Every top manufacturer caught up to Festool lately, We can no longuer justify the high price.

[@leonardmarchesano4280]

I recently had a project to trim out a house, I been using a 12" Hitachi saw that required set-up and alignment each time it was taken to site. I switched to the Kapex unit with extension wing about 3 years. I can honestly say you can't bet the Festool unit for accuracy, portability and dust collection. The project went quickly...this tool is a money maker. Still amazed how well it works from being stored \ abused in the truck.

[@TheSmartWoodshop]

I went in the opposite direction. I had two of the Bosch Saws, though mine were the previous model which did not have the glide. I work in the field most of the time and found the Bosch saw to be heavy moving in and out. The size and weight alone are worth the Kapex price to me. I am glad there are so many options these days for good tools and all prices. I started over 30 years ago, when the only slide saw was a Delta SawBuck. Great review, keep it up;0)

[@silasmsmith111]

Ron Paulk

[@MattEstlea]

Very good overview Marc. You've definitely highlighted some points that wouldn't be obvious unless you had used the saw for some time. Cheers!

[@Edward-vs4hz]

Having moved from the Bosch to the Kapex, I have to say I much prefer the Kapex handle, as it allows you to cut ambidextrous while keeping your body centered on the saw, which is especially helpful for me, as a righty, when the keeper cut is to the right of the blade.

[@bobleeswoodshop7919]

Just wanted to say thanks. I have been watching you on KZbin for about two years you were the first one I found .That did woodworking on KZbin . Good luck with your family and future on your move. It was great to meet you at the WIA a few weeks ago. You and others inspired me to start my own channel. Thanks again Best Regards Robert E Lee ( Bob Lee's woodshop) ,On KZbin I will be watching you as well!!👍👍👍👍

[@drewmusselman]

I really appreciate your reviews! They pertain to important aspects of function and not just random things that aren’t important. I appreciate your review also not being super long, it’s really the perfect amount of time! I will be subscribing!

[@CountNodonora]

Great review and I agree 100% with you. I've had the Bosch Glide for almost a year now and it's perfect except for the dust collection. I've somewhat solved the clamping since I have mine setup with a fence extension with plenty of places to put a quick clamp but for shorter pieces no dice. If anyone does find an after-market dust collection that works well, I'd REALLY appreciate to know about it. Thanks for teaching me almost everything I know about woodworking!

[@dennisberg2474]

I had the Bosch with rails, I added on larger rubber flaps for dust extraction and worked real well.

[@akessonwoods7683]

Good, fair video review. I picked up the 12" version of the Bosch Glide and have not looked back.

[@1averageamerican]

Thanks for the info. I'm getting this saw soon to replace my 15 year old Dewalt. Dan Pattison has a good video on improving the dust collection for the Bosch.

[@mattweeks5182]

The Bosh is beautifully smooth and has performed great for me. Especially with a quality blade, zero complaints. .

[@tylerahn223]

I just got my 12" Bosch Glide in the mail. I looked at the clamp and it's actually a lot easier to adjust than most clamps because it works just like a holdfast. You just put your material against the fence and drop the clamp into one of the holes in the back and give it a couple turns. It should stay in place. Or you could give it a sharp tap with a hammer or mallet like you would on an actual holdfast.

[@gregsabados3762]

I liked the review, it seemed very objective. I had 2 thoughts about your complaints. Fastcap has a xero clearance tape that might fix the slight drop to the insert and be quickly and easily replaceable as need and a good machine shop could add an extension to that clamp, materials wouldn't cost much, it mostly be labor.

[@hejustleft]

Even if Fe stool offered a BJ a day for a year, that handle would be a deal breaker. For other fans out there I own the BOSCH, and it's so well engineered.

[@audioleech]

the BOSCH is WAAAAAAAAAAY too heavy to use as a jobsite saw, it's also very hard to keep the saw at 90 degrees while making beveled cuts. Either your saw cuts square while making bevel cuts, or it cuts square while making 90 degree cuts, but you can't have both. I have used 3 different saws and they all had this issue. Although I have never used the handle on the festool just looking at it hurts my wrist.

[@jasonverheye2839]

I have both the Bosch 12" Axial Glide saw and the Festool Kapex. In terms of accuracy, I haven't found anything that beats the Kapex. I often use the Bosch on site for trim work and such, but it has torsion movement in it, some of which is the flex in the blade but also from the arms themselves. I build high end cottages in Muskoka (in the top 10 vacation destinations in the world, FYI) and I am blessed enough to get to work with lots of different woods. Not sure what my next general purpose saw will be but I'm not convinced it will be another Bosch

[@eddiesmith6096]

I like the Bosch too. Honestly, in 40 years of working in cabinet shops and job sites I’ve never once seen anyone use one of those clamps on a miter saw. I always assumed they include them as liability protection from litigation

[@ryanrich4596]

I wanted the Bosch but settled for the Hitachi. It can be had for less than $400 and has the same type of smaller footprint as the kapex and bosch. The handle is vertical but allows for both left and right hand use. So far I am very happy with it.

[@ben_r_]

Thank you Marc for doing this comparison!

[@madtitan9639]

The adjustable clamp you showed is the same as what came with my older model Bosch. Here's what you can do. Screw the pad down until the bar no longer contacts the fence, or so it no longer contacts the fence when you have a board under it. I used a 3/4 board, but you'll want to use whatever size you cut most often. That said, I hardly ever adjust the pad. When you go to use the lever, first, pull the clamp pad away from the fence - there is a little play in the device - and when you depress the lever, it will pull the board into the fence, as well as pushing it down into the base of the saw. Hope this makes the clamp and saw more usable for you!

[@louiesworkshop2023]

I have had the privilege of working over the years with several mitre saws designed and presented by different manufacturers, ranging from the mighty DeWalt, Makita, Festool, and only recently this new very clever mitre saw by Bosch. The saw arrived a few weeks ago and I only place a review when I have had a significant amount of time with the machine, I see many reviewers place reviews 30mins within receipt of their saw which is at best silly and at worse naive! The Bosch Glide Saw stands tall on the mitre station, it has real presence and a very clever arrangement of well engineered elements all designed to offer the woodworker cutting ability and space saving over many of its competitors. The Good! The saw sits tight to the wall saving a huge amount of valuable space, the saw is powered by an impressive 3hp brushed motor, the glide arm is very solid even at full extension, I found that at full reach you would have to really force the saw head to gain lateral movement either left or right, the depth of cuts is one of the deepest available in today's mitre saw market, the saw has a very wide stance with extending arms which offers greater support for longer lengths, the fences are tall and I found that both fences on my saw where near perfect! The Bad! I endeavoured over a period of 4hours with the aid of three highly accurate machined precision Germany squares but not one time did I make a cut that was perfect, some cuts where marginally better than others but none would be acceptable within the world of a cabinet maker. In conclusion it makes me rather sad to present this disappointing review, I had high hope and expectation for the new approach to mitre saws by Bosch, but taking into account that my saw may have been a lemon I reluctantly would have to conclude that I would reject this saw as an option if you require high end precision cuts at cabinet grade.

[@ron1martens]

Louie's Workshop I have the kapex. Over the years I bought a series of engineer squares. The longest one I bought is 450mm long. That really costs some money although I'm pleased to have bought it. I set up my mft using it. I found my festool track saw cuts more accurate than the kapex. The longer cuts are not quite as good on the kapex. Checking shorter cuts with my engineer square I think my machine may need some tweaking. However not bad for some of my applications . I find I'm slightly out making draws which then requires a little work to make good. I'm thinking of getting a good heavy table saw. The mft is good for cutting sheet goods. When you start working with recycled timber and don't prepare thoroughly because say I'm just building a draw for my shed I found the mft was slightly out. I'm guessing it's because I didn't run the timber through a buzzer. I just thicknessed. The board may have been slightly warped so my cut was marginally out. I did rectify it although I wasn't happy. What was good is the timber has a much nicer aesthetic look about it. Someone stole all my equipment. One of the machines I lost was my festool cordless plunge saw. I was going to give away my corded plunge saw. So glad I didn't. I'm a plasterer by the way although have made my own furniture since the 1990s. I worked with cabinet makers and helped them set up kitchens. I'm a sort of self taught learning through my trials.

[@louiesworkshop2023]

@@ron1martens hi Ronald, I am sorry for such a late reply, I found your response extremely interesting and accurate, always remember that wood does not come straight and often after machining g stay straight so the hidden art of the cabinet maker is to deal with this issue, and yes I do have the kapex, a brillant saw but not perfect, in the end pal we can get things close but not perfect!

[@MrErViLi]

Good radial arm saw for the win!

[@JimSteinbrecher]

there are several things that could be improved about the kapex (mainly the depth stop and the handle), but in my experience the bosch glide wobbles a lot more. also, it is a lot heavier. i would say theres a lot of room for improvement in the miter saw world.

[@stevemcentyre1570]

The clamping system on mine is my biggest gripe. The dust collection is the second. The ability to put this saw right up against a wall is a huge plus. Also the mechanism is super smooth.

[@kevinintheusa8984]

Thanks for the video. I finally decided and picked up this saw for my tiny shop. I have several Irwin clamps and I made one into a hold down for this saw and it works great. I will admit that dust collection is a problem and I did fiddle around with a piece of thick rubber to make mine bigger but it didn't help much. I may look around and see if anyone else has tackled the problem in a video. Great video.

[@1320crusier]

Seeing AvE's review of the Festool circular saw... I doubt any of their other tools are any better internally.

[@kostadinkondev829]

Idiot festool is a lot better than this

[@funkeybikemonkey]

If AvE says its shit mate then its SHIT!

[@Psychlist1972]

Nice review. The Bosch is nice; I almost bought it instead of the Kapex. The dust collection is what sold me on the Kapex, though. I've been using the saw in my house for the past 8 months on a long-running renovation. If dust collection isn't a big deal, or you're going to put a hood behind it, then the Kapex loses its main advantage. One thing I do like on the Bosch is the additional capacity. Also, FWIW, you can get a Forrest Chopmaster (and other blades)with the Kapex arbor size. It does cost something like $20 more, though.

[@OneWoodAuwoodworking]

Thanks Marc you may have pushed me over the edge, I have been eyeing one off at the local tool shop for months

[@joshdann2674]

Having also auditioned both of these saws in my shop, and with much respect, you can pry my kapex from my cold, dead hands. The dust collection, kerf lasers, and clamp are just too good to let go of. When I broke the bevel handle on my Kapex (tried too hard to adjust it without releasing the lock) I thought I would replace the saw with the Bosch. I was wrong, and returned the Bosch within 2 days. I also rarely bevel, so the Kapex is stuck at 90 degrees until I decide to order some parts. It has been 2 years now. And that's perfectly fine with me.

[@macsheldon]

I've had the same Bosch GCM12SD in my shop for a year now and cringe every time I use it. Unlike the Festool Kapex, the Bosch doesn't have soft start so unless you've got a death grip on the handle, it really jumps when you pull the trigger. The back fence is also odd and once allowed a cutoff piece to fling back with enough force to shatter the dust collection hood. It was all replaceable, but shouldn't have happened. I too use a Forrest Chopmaster blade as the Bosch blade that came with it had about 20 thou wobble. I'll buy a Festool Kapex before the end of the year and put the Bosch on Craigslist.

[@dsaviorrules]

With over 55 years experience and having used and owned various chop saws, I can not speak highly enough about the Festool Kapex. I think that it is worth every penny!

[@davidortega4746]

I have had my Bosch for one year now. I primarily build high end furniture, mantel clocks, and grandfather clocks. My biggest complaint with it is the inconsistent results. Especially on the wider cuts. I have found that it does not take much lateral pressure to cause the articulating arms to flex. This results in cuts that are out of square or not straight on longer cuts. The indents also have some slack and I have to make sure that I am actually back at 90 degrees after making a miter cut. This is not to say that I cannot get accurate cuts. But I do need to be careful about double checking that the saw is square to the fence, that I am careful not to put lateral pressure on the handle, and I cut slowly. Not sure that this is what I was looking for in a saw. I am really considering the Festool. As much as I wanted to fall in love with the Bosch, I kind of sensed that the relationship was going nowhere and that I was probably in denial to justify the purchase.

[@gjforeman]

Mark, I coupled this same saw with a $30 laser disc that replaces the left blade washer, and set the whole thing in my version of Jay Bates miter saw station. The laser is dead on accurate, and dust is no problem at all. Used it the other day for my first non-90 degree cuts and it was perfect.

[@wandamyers8674]

Got the bosch 12 inch glide an it is superb to any other slide saws,, thank you againg robert bosch

[@terrminatoragain461]

I have had mine for 8 years and am 95% happy with it,down side is it's hauled in my trailer and with the bit of movement it receives ,it needs constant adjustment I personally recommend this saw

[@Kawinj]

Love my Bosch GCM12SD. Lugging it up/down stairs or anywhere for that matter on site is not fun. Very heavy and awkward to carry. I do have the mobile stand for it too, and this is a must have for maneuvering it around. Great saw, have cut thousands of feet of molding as a trim carpenter and got mine on sale for around $520 and the stand for another $200 at HD. Dust collection does have to be modified at the port. I have a Festool vac attached and I did need to extend the flare like the video to guide the dust into the suction zone.

[@awesomeinprogress4189]

Hi there Marc, that toggle hold down will work just fine if you just slide the back fence out to the side 🙂 I have 10" saw with sliders, and very satisfied with its performance, it also looks like mine has got a bit better dust extraction than yours, but not the best...

[@riverplay4834]

I've been using the Bosch Glide in the field for just over a year. It is easily the best compound miter saw I have ever used and I've used many different brands over the last 20 years. It lives on a Kobalt folding saw stand in the back of an 18 foot box truck and gets rolled out on the job site. I was concerned about it staying true bouncing around in the back of the truck and to my chagrin that has yet to be an issue, it still cuts as true as the day I put into service. As for your problem with the Bosh clamp when I first bought them I had the same issue, until I called customer service, they told me just flip the lever on the back of the upper fence and slide it out till the clamp clears and re-lock it in the new position then when your done just slide it back to it's original position.

[@stuartanderton2183]

The problem I have with the Bosch is the weight - it is hernia inducing. I leave mine permanently attached to a mobile miter saw stand in my shop but even on that the weight has caused it to topple over. Fortunately the saw is strongly built and there was no significant damage. For onsite jobs I use either my Hitachi 10 inch or Hitachi 12 inch dual bevel miter saws - they are both accurate and portable. The Bosch has tremendous cutting capacity and is very accurate for cross cuts but the motor position limits bevel cuts, and compound miter cuts are not always precise.

[@MyFortressConstruction]

I've got the Bosch and the DeWalt Flexvolt. The Bosch has been used for about 7 years and I can't keep it square, not to mention the detent lock tab is totally broken and a pain to get it to unlock. It's basically junk at this point. The flexvolt doesn't seem like it's going to wear like the Bosch because I can adjust the detents and the physical bolts that stop it at certain bevels. Even before the Bosch was worn, the Flexvolt is so much easier to use, especially the lever that locks it in place, both for miters and bevels. All I can say is I'm sold on the DeWalt saw and the ability to run it on batteries has saved me several times when power went out or they suddenly had to work on the electricity on jobsites.

[@ryanern18]

Had my Bosch (the 10") for 6 months now and can't wait to get rid of it. Honestly, everything I've owned from Bosch save for my jigsaw has been a disappointment. A ton of play in the glide on anything more than 6" wide - you can see on the end grain where the blade drops through and immediately jumps as much as a 16th to the right when you push it through. Makes end to edge joining a mess and unless you're really, really mechanical in your motion you'll end up as much as an 8th out of square on a full capacity cross cut. Controls are stiff and heavy and mine has become stuck in a right bevel on multiple occasions. Really small nesting capacity cutting on a right 45 miter as the housing will hit the workpiece. Dust collection stinks and has been a common gripe with this unit. I have a 6 HP shop vac dedicated to it and it still leaves a ton of dust behind. I have it built into a station and every time I get half a day into a build I find myself pulling my DeWalt I use on site off my truck to finish.

[@mastercarpenterltd]

Im normally a dewalt man but was considering buying this bosch, is it a mistake?

[@1BlackSheep]

I've been on hundreds of job sites and never seen a Festool in the field ever. But I love my Bosch.

[@aegenov]

@@iiiS4 this is totally wrong. Do you own Festool?

[@NikolausBrown]

never really had the wall space to dedicate to a crosscut saw... but after watching this I'm kind of tempted to got get this one try and find a way to make it work.

[@cbcwoodworking6312]

Good video! Have had the same Bosch for 7 years and has never failed me, do have to recalibrate around every year but that maybe user error!

[@akaredcrossbow]

Great comparison. I had this Bosch saw and hated it, was never happy to use it. Took hours to dial it in to cut straight/square cuts. It would never cut the same every time. Sometimes it was straight other times it was way off. It also stuck out into the room more than I would’ve liked, especially if you wanted to swing it to make 45 degree cuts it couldn’t be placed that close to the wall. I finally had enough of it and sold it! I bought a Makita XSL04 36v Brushless miter saw and never looked back! It’s an amazing cordless saw. Makita was the closest to Festool that I could find without breaking the bank. Makita makes miter saws fun again. 👍🏻👍🏻

[@vicepresi815]

The festool clamp works on the bosch and you can purchase it separately.

[@heinrichjager3855]

Are you really sure?

[@Mario7p]

@@heinrichjager3855 are you really sure you want to know?

[@heinrichjager3855]

@@Mario7p I bought the saw and the clamp piss me, so yes I am. ;)

[@jimbair2770]

Saw a video earlier today by one of the FOG members. It was on his personal youtube channel and he was trying out the FastTrack Zero Clearance Insert Tape. He showed the price was $5.00 and I think the package contained 5 strips, so at a buck a shot, maybe that would take up the minor dip without shimming and also provide your zero clearance at the same time. The strips were 2" wide and I think 16" long, so you trim to fit by application.

[@jamesvoos2432]

Just a note on Forrest. They will drill any kind of holes necessary for your saw. I'll bet they have a solution for Festool. I have a Felder combination machine with 30mm arbor and locking pins, and they drilled out that format and it works great.

[@DJFalkoHannover]

I have an idea: Glue a drillbit, etc. on top of the screw of the clamp to quickly move your thread with a cordless screwdriver.

[@bob81pizza]

I have the same saw with the same sawblade and I love it. The only thing I don't like is that it weighs like 80+ pounds so it's kinda a pain to move around, but for a dedicated shop saw, it's perfect.

[@Werkzeug-Feinschmecker]

I have got this one and made exactly the same experience except that I had big issues with the Laser. I needed to replace it soon after I bought it and even though I have spent hours with it I didn't manage to adjust it so that it is actually pointing where the cut will finally be. Main reason for buying it was the larger capacity than the Festool and the integrated support. BTW: this machine is produced in China whereas Festool still produces in Germany or at least Europe...

[@JasonMichaelKotarski]

Great review, I've been using the Hitachi for almost a year (everyday) and it goes toe to toe with the Kapex and the Bosch .

[@jkrohmer60]

I have a Hitachi 10" dual bevel miter saw and I had a helluva time adjusting it to cut square. It came out of the box not cutting square. I still like it because it's easy to set up, the laser guide works well and it cost me $300 brand new. I'm a carpenter with 42 years of experience, so I've used many a saw over the years. I do most of my work onsite.

[@dannersmyers]

I love this saw! I've had it in my cabinet shop for five years now with no issues. You do need to pull it out from the wall a little more in order to make compound cuts.

[@bmf24]

we bought a Bosch to use at work. 4 good carpenters using it for a month. We ended up taking it back. The fence wouldn't stay square and the bevel would creep down as the lock wasnt strong enough to hold the head if it wasnt at a stop. We didn't replace it with a kapex because of the motor issues they have. I have a kapex and I like the saw a lot but I think with the amount of trim we cut in a day the motor wouldnt last long at all so advised against it. For a one man show it's great. For a whole crew its just too expensive. I am waiting for the new makita front rail miter saw to come to stores so I can check them out

[@MichaelObrycki]

Nice quick review. I have an old Ryobi 10" chop saw and am looking to replace it with a sliding compound saw. This one looks really nice.

[@calivalley9056]

I Have this saw and love it, straight out of the box it was perfect. I purchased it at Home Depot for $325, they were closing them out to make room for new product. Also took my 10% for military discount, stole it! I work part time for HD on the merchandising team, if you actively watch and do walk throughs you can really get some great deals.

[@williamladue1961]

Great review! I've been on the fence as to which one of these saws I want to purchase and I think your review has helped me make my decision. BTW I see you like the Forrest Blades, did you know they also make blades to fit the Kapex, and they will also resharpen the Festool blades better than new. Kapex owners can send their favorite blades to Forrest and have the 5/8" arbor re-bored to 30mm.

[@Jack-rg6xf]

I had the 12" Bosch, and 2 months out of warranty the motor blew. I like the Makita, and I love the slow start it offers.

[@paulround8501]

Clamps have been updated on this saw to quick release version similar to Kapex.

[@JohnnyDangerouss]

Thanks this just made the decision for me!

[@michaelm5124]

Just bought one and no quick clamp

[@JohnnyDangerouss]

@@michaelm5124 I bought one as well back with my first comment and I didn't get a quick clamp either. I searched and couldn't find any Info about a quick clamp for this saw.

[@aczep6706]

I have the glide saw and love it! Very adjustable to your liking. I wish it came with a laser though.

[@conditionsunknown9384]

Just curious , what happened to your Kapex ? I have both saws and love them both. Thanks and great review 👍

[@Rickmakes]

If you live near a Menards, they sell the Bosch and they regularly have 11% rebate sales. I've also seen the saw itself on sale there. I haven't picked on up yet. I'm waiting for a project where I need a miter saw.

[@stevebusch9915]

If you take the upper fence off the Bosch saw you can use the quick acting clamp fine.

[@truthserum9157]

I just cut some of hight of the fence off, it works great with quick clamps.

[@legalsolutions07]

Good Vid. I've used the same Bosch 12" Glide Miter Saw for 5 years and its been great and never let me down.

[@chrisfoote2145]

The clamp is not as bad as it sounds. Large adjustments are made in the back with the clamp shaft. You slide the clamp in after you place your piece on the table. The pressure you create when tightening keeps it in place.

[@R4BY4ORD]

Hi Marc, great video, thank you for your time. Not sure if you are aware (you probably are though) the fences also slid out and may aid in the use of the fast clamp. Thanks again, I am all in on this saw.

[@dmert6698]

Bought the Ten inch glide knowing my dewalt twelve inch was on the frits. I bought the bosch on a sale so it was boxed for almost a year befor the dewalt died. I was so excited to finally unbox this GLIDE. So after a few hours had this thing all set and matched up to my sawhelper stand. While trimming a bonus room in a garage (with mdf most forgiving material ever) was having trouble making my miters match on the door trim. Went back to the saw probable ten times to make a miter?? I thought it was me for about an hour thinking WTF!!! So what I found out is the positive stop on the glide, depending which way you lock them there about a half to quarter degree off from one another. Meaning a full degree at times for a miter. Giving the saw the benefit of the doubt I went to ever store in town ( four that have this saw) and did the same test. EVER BOSCH WAS THE SAME AS THE POS I OWN!!!!!!!>>>>>> Happy ending I bought the Kapex and now have a new boat anchor

[@xJuanGarciax]

I have both. Kapex I use for my shop (quieter, better accuracy and like the clamps better. Glide saw is my rough lumber saw, that I have attached to a mobile dolly thing. Nice for the added capacity for larger lumber/crown.

[@daryoushborja5115]

Not a Bosch chop saw fan only because the side to side movement when fully extended. Has very cool features.

[@TheOttacat]

Nice review. Makes one wonder why Bosch can't make a decent dust shroud and quick release clamp on their own. Neither seem like they would add much to the cost of the saw yet obviously would be of noticeable benefit. It would be interesting to know more about the blade availability your mentioned - do Forrest make blades for the Kapex and if so, is there a price difference?

[@bozwellification]

Fwiw, I have a different model of Bosch and it just took a bit of work on a belt sander to get that Festool clamp to fit. Feels bad to start cutting away material on a brand new $100 clamp but it fits well now and it’s great to use like you said.

[@stevejames2142]

Ok this may sound a bit nuts.. I'm a welder fabricator but somehow came across your vids on your KZbin.. Now I can't get enough of them, I also enjoy listening to the woodtalk podcast (although I don't always have a full grasp on what you're talking about) I guess I just share the 'making' interest as you guys despite the difference in the materials.. Keep up the great inspirational work.

[@woodwhisperer]

That's awesome to hear! Very cool that you aren't bored to tears listening/watching us wood guys. :)

[@q......]

Have you tried extending the back guides out for the quick release? and or removing it altogether? That should give you enough room for it to work like you want it to. By the back guide I mean the top guide is movable you can extend it out on either side, and or remove it leaving the bottom part.

[@jeremiah3543]

What to buy next? The Honda planer? The Powermatic pick up truck? Or the Bosch nonfestool fill in the blank?

[@shooterscott]

Thanks for doing this video Marc, I've been considering the Bosch saw for a couple years now.

[@rolandharrison5651]

Great review! The fence will slide over to give you clearance for that Bosch aftermarket hold down, which seems pretty cool. I’ve got this miter saw, but haven’t as yet unboxed. I’m really looking forward to getting it out. Thanks for the review.

[@TheNoviceWoodworker]

Hi Marc. Well I've been looking to upgrade my small 8" Bosch mitre saw for about 1 month, about a week ago i decide i was going to do it spend a bucket load of cash on the Kapex this weekend but on Friday i saw your vid and it confused me after 1 month of deciding and coming to a result you throw a spanner in the works, so i spent another 2/3 hours on you-tube looking at the Bosch and after weighing all the pros and cons up i've gone with the Bosch GCM12GDL cost £698 inc vat delivered it's the one with the laser, as it will be put in one place and stay theres is no problem about moving to job sites, so it was a no brainer plus I've saved myself £300/400 or you have, so thank you, i get the saw tomorrow and will be playing with it all day just to make sure its for me. Anyway just wanted to let you know your vid was just the thing a was looking for and i know you have had both so your a good person to listen to unless Bosch are paying you to say this is a top saw but i trust you 100% and all the other review say the same thing about it. So thank for saving me a bit of money for the wife to spend on windows blinds :( Cheers mate.

[@ChristopherPaulHill]

The biggest drawback on this saw for me has been the laser system. I'm still in disbelief that Bosch didn't add a duel laser system like the Kapex to their top of the line saw. Still, I love my Glide.

[@bowhunter144]

I enlarged the dust collection shroud using a motorcycle tube. The rubber is thick enough to keep its shape and gives easily if it comes in contact with the work piece. Another gentleman welded stainless tube that had a 2" ID for way better flow. Found hist mod using a google search.

[@TheReignharder]

Many new additions and improvements on the Bosch since you reviewed it back then - possibly your doing :)!

[@CPBuilds]

Great video. I would love that Bosch but after looking at it in person I really didn't care for it. My DeWalt is 9 years old and still going strong. Thanks for posting.

[@matthewsutton3682]

I’m curious about the differences between the Bosch and Makita? I’ve been seriously contemplating both. The Bosch seems to be great but I’ve been disappointed by Bosch in the past, whereas I cannot say Makita has ever let me down.

[@julietremblay1583]

I own this Bosch saw: I put the Kapex hold down clamp on this saw; it works and is sooo much better then the Bosch. I also put the Kapex rubber shroud on this saw using a zip tie. Again works much better. Dust collection - well this is not really fixable. I use a Festool shop vac, with large 36mm hose, and even with the Festool boot it's not very good.

[@guringai]

The upgraded model has a slightly better hold down clamp. I got mine yesterday & it's a huge improvement on my antique.

[@tugnut1]

Hey there Marc. I have had the bosch axial glide miter saw for about 5 or 6 years now. I have the same impressions of the saw that you do. My biggest gripe is the dust collection. It is actually pretty poor if you ask me. I have made a few adjustments to try and improve the performance, but to no avail. I first replaced the rubber shoot with a much larger one.....no change. Then I made a larger shroud that sits behind the fences that allows the rubber shroud to pass through and at the end of the cut, creates a backstop. No change here either. I think the real issue is where the shroud is located. If you look at the Kapex, the shroud is right behind the saw blade. The Bosch unit appears to be several inches back. It blows my mind that the Kapex can be that much better at dust collection than the bosch. With that said, for the price difference and how I use my saw (shop setting) I love my bosch.

[@woodwhisperer]

Yeah I noticed the same thing. Dust collection is one of those things that you REALLY need to think through in order to make it effective. Look at dust collection on just about any Festool tool and you'll see there's more to it than simply casting a big net and hoping for the best. Same thing with SawStop's dust collection when using their blade guard. It has to be a considering from the start of the tool's design and not an afterthought. So I don't have my hopes too high that I'l be able to get great dust collection from this thing. But I'm hoping to maybe get at least half way there. :)

[@hhanger1]

Hey Marc! I think I'll keep my Kapex. The dust collection is so good and the hold down works great. I wish it had a bit more power but with the Ug stand and wings, it doesn't take up much of a foot print in my shop. The Glide would be my second choice...

[@tugnut1]

Hey Marc, I have come up with a solution to significantly increase the amount of dust collection at the Bosch. If you are interested, I can shoot you my email address and tell you what I did. Since you are just starting to set up your new shop, it might be something you might want to incorporate.

With a bit of grinder work I fitted the Festool clamp on the bosh and it works great

[@rochat]

I've talked to some guys about the Bosch and a few have had a funny complaint that the saw is "too smooth" with regard to it's sliding action. It should be noted that you can increase the tension so the glide is a little stiffer. I'm not a Festool hater by any means, but I would expect for the price of their tools, they should be perfect in every single way. The complaints you had with the Festool did seem relatively minor, but if I'm dropping that kind of money, I demand perfection.

[@bobbystanley8580]

I have the Bosch and love it! The first thing I did was lock the thumb safety with a piece of fitted wood.

[@wabio]

Price is obviously a consideration, but my biggest beef with the Kapex is that it's depth of the cut since it's only a 10" blade. I have had numerous occasions on larger crown molding and large cedar beams where my 12" blade was barely enough.

[@MrSsrt33]

Hey quick comment on the bosh clamp if you loosen the wing nut in the back behind the fence and slid it out the quick clamp works just fine then.

[@SithLandlord]

Great review. Regarding the clamp. Honestly, if you're going to invest into something like this, you're more than likely going to build a Miter Saw station and put in a good Miter fence with a stop block which means you'll never use that clamping system again to make sure your piece doesn't go anywhere again. Plus when you're doing the same measurement cut over and over again, that where a stop block on a fence really shines, so I wouldn't say this is a major flaw. The only thing that's a down side is definitely the dust collection, which honestly, Festool does so well. I just really hate the handle grip to the Kapex which I think everyone except true loyalist Festool guys would agree on.

[@neparemodeling3341]

I had a Bosch glide for less than two weeks. As much as I wanted to like it and not spend the additional money for a kapex, the Bosch was a big let down. I’m a trim carpenter and cabinet builder/installer. So consistent performance is critical to me. The Bosch would be an awesome saw for a framer or deck builder but it is way too sloppy for fine finish work. There’s significant lateral deflection on the carriage. You have to be super delicant not to push it left or right. I finally broke down and ordered a kapex setup. As much as I hate spending the money on their over priced products, they do perform very well.

[@kbo8029]

I actually bought this saw from the review and do like it. But I couldn't get over the wobble. I never got a square cut once so I'm thinking of trying to go with the kapex now. I have had my Bosch for 5yrs and it's definitely better than the others in the same price point.

[@NaluRash]

Just wanted to say hello. Man, I've been watching your videos for a long time now. Glad your still doing it. Happy new year

[@jeffschaak8889]

I recently purchased the Bosch saw and saw a review on Amazon for the Kapex clamp that said you had a video showing it’s use on the Bosch saw, so I bought one. I searched your channel prior to purchasing and couldn’t find any video showing this use, but ordered one anyway. I just received it and it does fit the saw, but only inserts partially, and was curious if you used it like this, or did any modifications to the shaft to insert further. Thanks