worked 202 red motor

worked 202 holden red motor with yella terra head and running freshly rebuilt triple su's.Motor is going into a hq with a 5 speed supra box and 10 bolt salisbury diff , should go alright on the drag strip!

[@KaneBeutel]

Its not the size of the engine that counts...ITS HOW FUCKING BADASS IT IS THAT COUNTS!

[@MrPhatNOB]

Darth Vader was holding the camera..

[@ZeroOneChannel]

what a beast

[@stuart782009]

Pretty cool motor mate, personally i believe that the 179hp blocks are a much better motor as you can punch them out 120 thou and get 192cui. had a 186 which was 60 thou over - so 192cui with a stage 5 yella terra head and triple su's in a 2 door lc torana. su's suck - swap them for a set of triple 45mm twin throat webers or go for fuel injection from a vk commodore with aftermarket injectors and computer or go for an aftermarket manifold straight up. had a 44/84 speedway cam in the torana.

[@Mcbleh]

Beautiful mate! Is it me, or does this have the same low-down, dull knocking sound my worked 202 does? At cam speed, not crank. I have a rebuilt 40thou bottom end, alloy gears, worked YT head, roller rockers, and since i went from a 28/68 to 30/70 cam with much more lift, it's had a dull clunk at idle. Tried everything. Runs fine though. Oh, you want to hit the strip? Step up from the 30/70. Far too mild, rev range only to about 5500.

[@TheDave6179]

G'day from NZ. Dunno if you've done it yet, radius the leading edge of the pistons (in the SU's) around 10mm, and you will be surprised at the FREE performance increase! Read it in an old pom mag, did it at work with a file and some wet and dry (remove the needles first), cost nothing, very happy! Had my HJ since 1985, had the SU's since 1988. Beautiful noise they make!!!!

[@MrMapex2010]

Bloody nice engine, I was going to fit triple su's to mine but have blown all my budget on restoring my HZ ute. Im not sure if I should stick with the original stromberg until I can afford su's or buy a 350 Holley.

[@hydengineering]

Cool, what are you gonna put it in??

[@justinjoyit13]

Nice work! Any dyno runs or horsepower figures?

[@katskratchkustumz]

mmmmmmmmmm nummy engine mate!

[@TheRobberto007]

nice