Works Like Magic! Pour Super Glue on Cement and Be Amazed

Hello everyone! You are watching video "Works Like Magic! Pour Super Glue on Cement and Be Amazed"
I hope you enjoy watching my video!
► Subscribe: bit.ly/Creatio...
On Creation Holic channel, you can learn various inventions, science projects, crafts and DIYs teaching how to reuse or recycle.
© Copyright by Creation Holic ☞ Do not Reup
#diy #tipsandtricks #recyclediy #superglue

[@gpj0910]

謝謝！

[@creationholic101]

I sincerely appreciate your support. Your contribution is not only a significant source of encouragement but also helps me continue to pursue my passion and creativity that I love. I am truly grateful for wonderful audiences like you!

[@spinynorman887]

Pour super glue on cement, and it glues the cement together. Just like you'd expect.

[@zandertunes9602]

A bit stronger than I'd expect tbh

[@DonAntoni]

Does it also work with coke? ⛄️ maybe bond is even stronger!

[@Tips365day]

How wonderful! I learned a lot of great tips from your creative videos

[@xidkid]

Super glue cures instantly with water. That's why it bonds skin so bloody well. Very fine hydroscopic powders contain a small amount water, like cement, baking soda, cornstarch, plaster of Paris. Different powders give different properties to the end result.

[@creationholic101]

Hello and thank you so much for your comment! What you say is very true! If you have any other ideas or solutions, feel free to share them with me! Wish you the best!

[@baldeagle5297]

My hands must be very dry. Super glue doesn't stick well to my fingers.

[@dantemalit1744]

​@@creationholic101i quick glued a deep skin cut caused by the corner of a corrugated roofing during a super typhoon and it joined the cut cleanly without going to the ER.Thanks to super glue.

[@bobo888bobo]

@@dantemalit1744 supposedly super glue was developed for wounds during the vietnam war

[@mostthoughtprovoking]

@@dantemalit1744 We in the ER have used super glue for many lacerations vs suturing. It works great and glad you had some in your emergency!

[@notmyworld44]

PLEASE NOTE: These repairs cannot be done with standard thick super glues that are available from local retailers. You will have to order watery-thin super glues from brands such as StarBond. And be extremely cautious using it, because the fumes are very toxic, and the glue itself is extremely caustic to your skin. Be advised to wear an apron and thin rubber gloves, and have active ventilation. This stuff is DANGEROUS, and I'm not exaggerating at all!

[@mcbillygoat]

People seem to like that Starbond “Heavy thin” product. It should be the best for this application I would think

[@creationholic101]

Hello! thanks for your comment. Wish you all the best!

[@ChristianNally]

Is it a chemical reaction or just a physical one? (i.e. would sand work?) It looks like it's bubbling a bit... so probably chemical. But do you know the chemical equations? What does it convert into?

[@wakeupuk3860]

Could not agree more, well done for putting the 'correct' information before attempting this use of superglue and cement. I am an ex Civil Engineer Technician, thus have a fair amount of knowledge regarding cement and later went on to become a Science Teacher. Now retired I often watch KZbin and shake my head at KZbinrs (like this one) who put on here without any real thought, technical expertise and not stating the dangers of attempting to copy what they have put on here.

[@The_Conspiracy_Analyst]

yeah, cyanoacrylate

[@BristolPeterUK]

These videos are so much better at double speed

[@creationholic101]

Thank you! Cheers!

[@Tips365day]

How wonderful! I learned a lot of great tips from your creative videos

[@DIYTechTrends]

Oh my God! This topic has never stopped being hot, I have also done many experiments combining cement with super glue and it really works, congratulations! ❤🎉🎉🎉

[@creationholic101]

Welcome to Creation Holic channel! Thank you so much for your support

[@adamudanbakoibrahim7145]

Amazing! Thank you very much, I will try it on my overhead water tank. I hope it will work. I am a Nigerian from Taraba State

[@DIYTechTrends]

@@adamudanbakoibrahim7145 Oh great, try it and let us know the results. If necessary, I will offer solutions to help your tank operate better (I am an engineer).

[@shanethompson2915]

Very helpful in a throw away society. I always try to repair before replace and I shall now be using this method as well thank you.

[@creationholic101]

Hello, you are such a nice person to have left me a comment! With a dream to contribute to making the world a better place, I really need good and useful ideas and solutions! If you have any other great ideas please share with me! Together we will make this world a better place! Wishing you good health, success and happiness! Thank you very much!

[@miguelangelabascaltorres1472]

Yo también lo Usaré, con todas las cosas que he tirado y vuelto a comprar, y con éste Truco, me abría ahorrado mucho tiempo y Dinero. Un saludo Amigo.

[@231wildy]

Many car makers rather the world turn towards throw away instead of repair. More margins for shareholders and less need to fret over fixing. If not for KZbin, the amount of carbon emissions due to the practice of throw and repair will be unabated. That day I took scrap wood from old IKEA furniture to build a router case. Money saved and less need to cut more trees.

[@magnarez]

Works the same with baking soda. But is instant and hard as steel . It can even be drilled and tapped. It holds a thread.

[@dustin6828]

Hard as steel literally or figuratively?

[@mohammedfouad148]

Talc powder and corn starch are better than baking soda..🙂

[@michaelm3404]

@@mohammedfouad148 so talc powder + corn start > baking soda > cement?

[@creationholic101]

Thank you! Cheers!

[@braddbradd5671]

I used corn starch before .Heres a good tip if you got a wire on your keyboard and it keeps breaking were its connected at the keyboard juts build up some of you super glue and starch around the base bit to make it stiff so it dont bend should last years after that @@mohammedfouad148

[@Repairman10169]

Very ingeniuos ideas 💡and your filming and video editing are top 👍 I always watch your channel ! Thanks 👍

[@creationholic101]

Thank you very much!

[@antonioluque8546]

Magnífico! Una gran idea que ayuda muchísimo a solucionar problemas rápidamente Gracias!!

[@rekhaasokadevi7062]

Are you from Italy 😮

[@rekhaasokadevi7062]

Or from France 😊

[@creationholic101]

Glad you like them!

[@tukangab]

To stick it, it's better to sand the surface first, this will guarantee longer strength

[@creationholic101]

Hello! thanks for your comment. Wish you all the best!

[@Tips365day]

How wonderful! I learned a lot of great tips from your creative videos

[@jimichan7649]

That bond between the 2 steel rods began to crack between 1:22 and 1:23. just before the cut away.

[@creationholic101]

Yes, it can only withstand a certain impact force

[@loganShoota]

Good 👀 mate.😂

[@Tips365day]

6:57 How wonderful! I learned a lot of great tips from your creative videos

[@creationholic101]

Thank you! Cheers!

[@sreekumarUSA]

Buddy... Thank you. That's fantastic. Never thought of using Cement as base with Super Glue.

[@creationholic101]

You’re welcome, buddy! Glad you found it fantastic. Cement is indeed a great base with super glue. 😊

[@antonioarihonoriodeabreuab9276]

Excelentes ideias, obrigado

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@dailytricks6161]

Now I know so much more about the wonders of super glue and cement! Thank you for your insight and wish you sustainable development!😆

[@jerrybushman]

Baking soda works too

[@HansDelbruck53]

@@jerrybushman In lieu of super glue or in lieu of cement?

[@jerrybushman]

@@HansDelbruck53 🤦‍♂

[@threedotsonedash]

@@jerrybushmancame here to say the same thing & much easier to get a small box of baking soda than a 40 lb (or so) bag of cement too.

[@jerrybushman]

@@threedotsonedash I was gonna say a 90 lb bag, so yeah, and everyone has baking soda

[@r.j.garcia1127]

Grand merci pour partager tes connaissances de "bricolage" J'adore toujours apprendre des choses nouvelles

[@creationholic101]

Merci beaucoup! Heureux que vous aimiez apprendre de nouvelles astuces!

[@fatihlamur]

Harika...

[@creationholic101]

Thank you! Cheers!

[@davidhawley1132]

Cement is physically hard because of a chemical reaction with water. If you are going to use cyanoacrylate glue, why not simply sand?

[@bodytechnic]

Sands vary. Cement is consistent and fine. I think talc or gypsum powder might work too? Certainly makes you want to try it out

[@pumper34x]

Cement is the end result of a combination of materials. So,what exactly is being used here? I could have used this video about 1000 dollars ago for different pieces that broke over the years. Genius

[@joselitoacayan3727]

I'm using it but different ways. Sometimes cigarette ash or a wood ash. Really works

[@udayshah6758]

And using something like glue is more expensive than water.

[@sobeit1927]

I imagine plaster would work very well .

[@darrenoak7187]

This is amazing "Creation holic". Thank you for sharing.

[@creationholic101]

Thank you! Cheers!

[@vickiehill627]

That was a

[@vickiehill627]

That was awesome! I would had never thought of that. Thank you so much!! You are brilliant!!

[@jhodondo]

Surpreendentemente incrível essa idéia. Obrigado por compartilhar.

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@jmwetterene7459]

super merci

[@creationholic101]

Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

[@GamePlayShare]

I used soda for this

[@creationholic101]

Thanks for sharing!

[@johnewaynedocarmooliveira7602]

Caramba! Obrigado pela dica.

[@creationholic101]

Thanks so much for watching our video. Wish you all the best

[@Fran_Tluanga]

The material in cigarette bud is very strong when mixed with superglue and useful in giving support to broken edges of vehicle plastic parts

[@hanitwfik]

Lol, that's what my dad taught me about years ago, and it works 💪

[@creationholic101]

Great suggestion!

[@fredericapanon207]

Are you talking about a cigarette filter?

[@hanitwfik]

@@fredericapanon207 no the cigarettes ash

[@fredericapanon207]

@@hanitwfik ah. Well, if the fineness of a powder is related to how well the CA glue permeates it, cigarette ash is certainly 1ell suited as it is very, very fine. IIRC, its fineness is on the order of 800 sq.m. per gram.

[@Moh--Ali0909]

I'm from Iran❤❤❤❤❤

[@creationholic101]

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

[@operation1968]

That's a nice trick

[@creationholic101]

I'm glad you enjoyed this project! Feel free to connect with other viewers in the comments section and share your results. It's always inspiring to see what everyone creates

[@operation1968]

@@creationholic101 Thanks 👍🏻

[@estuardos3072]

Thank you! The best ideas are the simplest.....

[@creationholic101]

Glad you like them!

[@MohamedOummad-v3u]

جزاك الله خيرا ❤❤❤

[@creationholic101]

Hello! I am glad you like this ideas. Wishing you all good things!

[@13christbane]

people are easily amazed

[@ArminSchnur]

You have useful ideas. Greetings from NRW DEUTSCHland.

[@creationholic101]

Thank you very much!

[@harish.hgowda4558]

Thank you for the video from India

[@creationholic101]

Welcome to Creation Holic channel! Hope you have a good time while watching the video

[@boogathon]

@@creationholic101 But... is the video from India...?

[@GeoffsPhilsInfo]

Brilliant idea where no real force is exerted like the bolt hole on a panel, for years I've been making my own wood filler, simply mix some of the same wood saw dust with PVA glue, when dried out you can sand it, works wonders. If you put ordinary hand soap or washing up liquid on your metal screw before inserting it into wood or a wall plug, you'll find it is easier to turn the driver. To avoid splitting wood when hammering nails into it, turn it so it's sharp point is upwards and lightly hammer a small flat on it carefully so it doesn't bend, then use in wood. If you need plumbers seal for joints but have none, you can either use gloss paint or make up some using dry filler powder and mix it with linseed oil to a not too runny consistency.

[@creationholic101]

Thank you for sharing. Have a good day!

[@paulsnord2759]

Silikon good!

[@Anklespank]

If need a condom but have none, just use saran wrap or a baggie and then tie an elastic around the base

[@frugalbirders7416]

NEVER use soap to lubricate screws. It is hydrophilic and will eventually rust the metal screw. Always use wax, or even an oil if the mess is not a problem, for this kind of lubrication.

[@Advcrazy]

If only the Romans had known this trick they could have made structures that really lasted a long time! Seriously though, I hadn’t though if repairing plastics this way. Nice tip!

[@creationholic101]

Thanks so much for watching our video. Wish you all the best

[@robertodistefano6701]

ESSA É SENSACIONAL !!!!!!!!!

[@creationholic101]

Thanks so much for watching our video. Wish you all the best

[@Willesden_Rab1_TV]

2:01 🔥🔥🔥🔥🔥🔥🔥🔥 thank you for sharing

[@creationholic101]

Thank you! Cheers!

[@AmazingSmart-ngth]

WOW...great ideas 💡 ✨!!! I will definitely use some of these ideas. THANKS 😊

[@creationholic101]

Awesome! Thank you!

[@danbhakta]

Using a glue to bind the glue that normally binds concrete.

[@creationholic101]

Welcome to Creation Holic channel! Hope you have a good time while watching the video

[@DavidStarkdyvarg]

Kinda redundant. Like pulling weeds.

[@danbhakta]

@@DavidStarkdyvarg It's Inception level.

[@jasimotosan]

Saludos, te estoy viendo desde el sur de España, muy buen vídeo. Conocía lo del superglue y el bicarbonato, pero esto del cemento no, habrá que probarlo. Gracias por subir el vídeo.

[@creationholic101]

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

[@wofakwame4163]

Superglue + cement = Superfiller Merci beaucoup

[@creationholic101]

Thanks so much for watching our video. Wish you all the best

[@giuseppeiurilli4089]

Bonsoir super vos démonstrations mais ou trouver votre super colle? merci et bonne Anne 2024. Giuseppe de Strasbourg France

[@creationholic101]

cyanoacrylate adhesive glue

[@jesseswalters]

Cotton and superglue works well too. It's more for plastic, I don't think it would work for metal rods. That's interesting how strong the bond between the rods was.

[@creationholic101]

Thank you! Cheers!

[@walmartdog1142]

I would like to see strength comparisons with super glue paired with cement, baking soda, saw dust, cigarette ashes, cotton ball fibers, the sanding dust from various plastics and metals. I'm betting that dust from waxy feeling plastics like polyethylene and polypropylene would not work.

[@creationholic101]

Hello! thanks for your recommendation. Wish you all the best!

[@matrox]

Me too.

[@劉士杰-k3e]

可以的，我剛使用小蘇打，把改裝成超扁的眼鏡盒(聚乙烯)黏合完成，相當堅固。

[@sobeit1927]

Do your own experiment .

[@PhillipHolt-f9r]

Too much work

[@ianlowery6014]

Nobody has mentioned using graphite. Graphite consists of layers of graphene which is incredibly strong. You will have a lot more work tidying up the job after using graphite powder, but the mend will be much stronger.

[@snakezdewiggle6084]

@ianlowery6014 Have you actually used it ?

[@ianlowery6014]

@@snakezdewiggle6084 I snort it and inject it regularly.

[@creationholic101]

Hello! thanks for your recommendation. Wish you all the best! kzbin.info/www/bejne/l4HLp4WrqpWlZ8k

[@DavidIke07]

Indeed, no wonder they used graphene oxide in you know what..... Sneaky bastards.

[@coppulor6500]

@@ianlowery6014 ergo all the knowledge you know posses! wish i had thought of that!! @snakez do things in this video and use graphite power instead of cement.

[@nathancresswell794]

Quite literally any filling agent with superglue works ie SG + flour, SG + Baking soda, SG + sawdust, SG + paper dust etc it just improves and speeds up the curing process.

[@creationholic101]

Hello and thank you so much for your comment! What you say is very true! If you have any other ideas or solutions, feel free to share them with me! Wish you the best!

[@equalevolution5563]

Nice scissors! & The super glue done exactly what was expected!

[@creationholic101]

Yes! Thank you!

[@grzegorznowicki2494]

Cześć jestem Z POLSKI podoba mi sie Twój filmik jestem po wrażeniem co można zrobić z klejem i cementem pozdrawiam i proszę o więcej filmików.

[@creationholic101]

Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!

[@davidsanders6957]

You're out of see what they did. Do. John GOTTA with a bag of cement

[@neiloberholzer4292]

Quite incredible, especially with the plastic mouldings. How often don't we have such issues?😮

[@iamthecheese2737]

So let me get this straight, you can't smash it a hammer, but can cut it with a pair of art scissors?

[@bojandimitrieskimilenkovic9226]

You're not the brightest bulb in the box eh?

[@iamthecheese2737]

@@bojandimitrieskimilenkovic9226 hur dur. That's the best you can come up with huh?

[@bojandimitrieskimilenkovic9226]

@@iamthecheese2737hur......dur? 🤭😂 I guess I was right.

[@iamthecheese2737]

@@bojandimitrieskimilenkovic9226 congrats, you played yourself. You got it 👍

[@CL9k24a3]

​@@iamthecheese2737you cant penetrate bullet proof vest with a bullet but you can cut it with a scissors

[@harrysteiman]

Great videos. BTW, I am from Israel. You have also used baking soda in other videos. Which is better, baking soda or cement? Can any fine powder such as potato starch or pepper be used? Could we use a metallic powder with super glue to "solder" wires? Thanks

[@creationholic101]

Baking soda is very good

[@CHIPSpeaking]

Metallic powder soldering via CA glues likely won't work unless an entire chain of metal particles are in continuous contact with each other. No continuity would exist unless the powder was well over 95%. As well, the tiny nature of a powder conductor would burn out quickly

[@thatfeeble-mindedboy]

The finer the powder, the more surface area available to carry moisture evenly within the mixture. Adding any kind of mesh,fibers,fabric etc. only adds overall strength, resistance to fracture, stress dispersion,and bonding surface area within, and extending out to the edges where it contacts the material being repaired. It also permits the repair to be sanded down to a grit of 6,8,10, up to 12,000 grit, making a gloss finish possible if desired, but obviously, it’s going to be harder to sand diatomaceous earth than baking soda, for example. A drinking straw cut at an angle, and loaded with whatever powdered medium, coming into intermittent, even indirect, contact with a running electric toothbrush (with some practice) can be a very precise applicator without actually coming in contact with any glue, since the bond is instantaneous and permanent.

[@richarddillio6258]

so what your saying is that you can use any powdered material the finer the better, cement has nothing to do with the degree of hardness you obtain. What about powdered metal.

[@creationholic101]

kzbin.info/www/bejne/oWLZZn9_qbh3fqs

[@smather2175]

oops

[@earthenscience]

Another protip: If they can casually cut the excess of the mold with scissors its not very strong.

[@grantp4022]

Just tried it with cigarette as ashes, it really hardens up like a rock. Have not tried it with baking soda yet, but I will.

[@bazzingabomb]

Saw dust and superglue also works very well if you don't have cement, it's saved me a few times.

[@creationholic101]

Thanks for sharing!

[@jm2784]

Que Cola boa esta, qual é o nome desta cola e onde que eu compro?

[@creationholic101]

cyanoacrylate adhesive glue

[@justcurious3525]

Good tips. What do you do with the rest of the 70 lb. bag of cement?

[@creationholic101]

It comes in a small package. You can buy it at DAISO stores

[@ggj666]

leave it open outside and in few weeks you have a step :o)

[@justcurious3525]

@@ggj666 Indeed.

[@jairgalli5587]

Formidável

[@creationholic101]

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

[@hotburrito2913]

Be careful with those fumes!! Make sure you do this in a well ventilated place. I don't know what the fumes are, but super glue is cyanoacrilate, so possibly related to cyanide 😮

[@creationholic101]

Hello! thanks for your comment. Wish you all the best!

[@MrLanternland]

Definitely!

[@notmyworld44]

The fumes are CYANIDE GAS, the same gas that is used in execution chambers. It will seriously burn your eyes and lungs. You must not even get this stuff close to your face! I am not exaggerating at all!!

[@grantp4022]

Just tried mixing super glue with cigarette ashes, and it hardens up like a rock, just very hard and solid. Have not tried baking soda yet, but I will. Thought this could help someone.

[@creationholic101]

it has the same effect

[@tuheur-tk4ju]

Boisbriand Québec

[@creationholic101]

Thank you for watching

[@polysporin8332]

on other plastic items, you are better off soldering plastic parts together. with some small metal reinforcement like staples or paperclips. the glue is brittle and will break again.

[@timkrouse345]

This repair is stronger and better than plastic, and easier.

[@creationholic101]

Welcome to Creation Holic channel! Thank you so much for your support

[@matrox]

1:22 it was about to break so he stopped it.

[@creationholic101]

Yeah true

[@ronaldkeepsmile4404]

👍👍

[@creationholic101]

Welcome to Creation Holic channel! Thank you so much for your support

[@ASO-F5B]

good idea Thank you

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@daniellopezperez2033]

Excelente idea felicitaciones

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@Welding_Handyman]

For anything steel, a small welder and partial fender washer would be better than superglue. Depends on how much weight is going to be pushing or pulling on it.

[@sobeit1927]

Most households have superglue and some kind of powder . Of course a welder would be better than glue for steel . I don’t think you quite get this . Lol 😂

[@riopugh8220]

Oh yes and everyone has a small welder in their kitchen 🙄

[@creationholic101]

Welcome to Creation Holic channel! Thank you so much for your support

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@ganjalfcreamcorn8438]

Yes, that's very obvious lol. I'm actually surprised at how well it held up to being bent. I wonder If the concrete does anything different from baking soda. I have a welder, so it's not anything I'll be doing, but could help in a pinch I suppose.

[@hakarge]

🧠👍💯👏

[@creationholic101]

Hello! thanks for your comment. Wish you all the best!

[@Mrjackietreehorn]

Never underestimate the Chinese ability to make trash out of … trash. I’m surprised they didn’t use ramen noodles with that concrete mix on the corner of the dresser

[@정미자-z5v]

따봉입니다

[@CreativePassion88]

good tips for life

[@creationholic101]

Glad it helped!

[@falsoimpostor]

fantastico,saludos desde buenos aires argentina

[@creationholic101]

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

[@normascahayaemas3285]

Very good ideas

[@creationholic101]

Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!

[@maria.luisa.garcia2169]

Gracias! Gracias! Gracias ! Saludos desde Miami! 👍🌹😏 🙄😲 buenísimo ! 😂😂😂😂

[@creationholic101]

Welcome to Creation Holic channel! Hope you have a good time while watching the video

[@juancarlossanchezchica9773]

Eres un maquina,sigue asi,q bas a llegar mas para alla del berrueco💪💪💪

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@TiborRoussou]

I have some LFT Mapei tile mortar; definitely going to try this for small plastic repairs.

[@creationholic101]

Thank you for watching

[@cha-ka8671]

If it really works that well this is genius. I never thought of using cement. I am going to try that next time I need to make a bond far more secure.

[@creationholic101]

I'd love to hear if you've tried this idea yourself or if you have any other creative suggestions to share

[@bojandimitrieskimilenkovic9226]

This was actually useful in more ways than one, thanks!

[@creationholic101]

Thank you! Cheers!

[@samazhar6067]

You have solved so many problems!

[@creationholic101]

Thank you! Cheers!

[@miguelvalcarcel1440]

Saludos desde Venezuela. Excelente video. me gusta este tipo de contenido, es muy util de verdad y se aprende mucho.

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@inventorK20]

GOOD😀

[@allendulles2481]

THIS GUY IS THE MAN! This is a great video along with your other helpful and thought-provoking tutorials!! Keep up the great work! 👍

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@abdelhakzaaim5530]

لم اكن أعرف أي شيء عن هادا الخليط المدهش. تحياتي لك دمت بخير

[@creationholic101]

Thank you for watching

[@creationholic101]

Thank you for watching

[@ChalitPhrasuwan-pr8xs]

ผลงานทุกชิ้นมีคุณภาพดีมาก

[@skeed59]

Hallo aus Deutschland, Stadt Goslar! Die Reparaturvideos haben mich begeistert und werde diese im Bedarfsfall anwenden. Danke dafür! Ich bin schon auf weitere Videaos von Ihnen gespannt. Viele Grüsse

[@creationholic101]

Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

[@andydavies285]

Very knowledgeable and therapeutic. Thank you.

[@creationholic101]

Glad you enjoyed it!

[@Moh--Ali0909]

Good time, teacher, your works are really beautiful 💖🤌👍🌹 and unique 💖💖

[@creationholic101]

Thank you! 😃

[@ahmedmai-dj4iq]

Super Merci

[@creationholic101]

Welcome to Creation Holic channel! Thank you so much for your support

[@dallascuthbertson7430]

Yes, I enjoyed your video in Sydney Australia and I was amazed. Thank you Creation Holic,

[@creationholic101]

Glad you enjoyed it!

[@EloyPastrana]

Simplemente genial. Gracias por compartirlo

[@creationholic101]

Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

[@headintheshedable]

Loving the Hammond. 🙂

[@creationholic101]

Thank you! Glad you're enjoying it! 🙂

[@HowardYoungEagleflight]

Thank you from Timmins Ontario Canada

[@creationholic101]

Hello, you are so kind to leave me a comment! If you have any other better ideas, please share them with me! Wishing you health and happiness always!

[@DJJAW11]

... Great little vid. Love from a Englander !.

[@creationholic101]

Glad you like them!

[@angelarondinelli2571]

Non ti sfugge niente,sei in gamba veramente Complimenti ☺️☺️☺️☺️

[@ashoka.great1946]

Wow, quite appreciable.

[@creationholic101]

I'm glad you enjoyed this project! Feel free to connect with other viewers in the comments section and share your results. It's always inspiring to see what everyone creates

[@CorporacionZolda]

Saludos desde Costa Rica!

[@creationholic101]

Welcome to Creation Holic channel! Hope you have a good time while watching the video

[@promitheasapollonious4230]

Greetings from Greece. Thank you for sharing

[@creationholic101]

Welcome to Creation Holic channel! Hope you have a good time while watching the video

[@RudiBeragam]

Ide nya sangat menakjubkan sobat, boleh di coba ni. Terima kasih atas ilmu atau ide kreatif anda, saya menikmati dari awal hingga akhir dari 7 uji coba ide kreatif anda hanya dari lem super dan semen, sekali lagi saya ucapkan terima kasih banyak.

[@creationholic101]

Hello! I am very happy to read your comment. Have a good day!

[@miguelsanchezblanco1048]

Me parece tu ingenio , fantástico.

[@creationholic101]

Welcome to Creation Holic channel! Thank you so much for your support

[@luisreyes6506]

Gracias por compartir estas ideas geniales

[@creationholic101]

I am glad you like this ideas. Wishing you all good things!

[@kleetus92]

You can just use baking soda... does the same thing and isn't corrosive.

[@boogathon]

True dat.

[@creationholic101]

Hello! thanks for your comment. Wish you all the best!

[@cborbones]

Gracias por el video desde Tenerife, Islas Canarias, España

[@creationholic101]

Welcome to Creation Holic channel! Hope you have a good time while watching the video

[@TV-js5zg]

good idea~~!!

[@creationholic101]

Thanks for sharing!!

[@finnwang1538]

I am from Norway and find your channel absolutely stunning. Thanks ever so much for sharing. Kind regards, Finn

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@mhemedboulmani4052]

نعم فكرة رائعة

[@creationholic101]

Thank you! Cheers!