WORKSHOP TOUR - £4000 UPGRADE

[@woodesroger]

VERY IMPORTANT: Daggerwin, you need to keep your carbon monoxide detector closer to the floor, CO is very heavy compared to air, and by the time that the CO level is high enough to reach the detector you'd probably be dead

[@Daggerwin]

Thanks for the tip. There is only a very small risk of carbon monoxide in there anyway, it's just a precaution

[@diarmuid858]

I didn't know that thanks. My CO detector is on the ceiling...

[@woodesroger]

@@Daggerwin of course, but using it properly is more important than "the odds of it happening"

[@jtslmn720]

@@Daggerwin This actually the exact opposite, CO is lighter than air. CO2 is heavier than air...

[@deekeenan1987]

My garage is a tip!! Your just reminding me I need to clear it out!!

[@niallgladerbob480]

I think someone should sponsor you daggerwin deffo deserve it 👌👍

[@Andy_83_SWE]

Jeremy Clarkson disagrees haha

[@Kieran-wi9xm]

I wish the shed in our farm was that clean 😂😂👍 (edit) what happened to the model farm series ?

[@Rooikat76]

Ya the model farm vids were good

[@Massey-ze3ln]

Really hope he started doing some more they were great

[@jessie86372]

You said it kieran if only it was that easy to keep the shed clean

[@polaris600iq]

Or should u say where are the videos

[@FireByTrial1]

that is a nice setup, a lot of good equipment there, looking forward to seeing some more MR videos :D

[@kyranoboyle3378]

2:06 WRONG according to Jeremy Clarkson they do! 😂

[@samvella1045]

Hi daggerwin it’s a bit late for this comment but I just want to say keep uploading on this channel because it’s very interesting and I love compact tractors!😱😱 Love your vids

[@eddiequinn7266]

Make another video on this channel

[@yvardeboer9431]

Wooooooowww so many orange containers

[@stefanktm06.]

Love the vacuum. henry is my friend

[@DH-kx8nd]

We need more lawnmower stuff on this channel love this channel keep it up

[@Daggerwin]

That's the plan :) Do you think a different channel name too?

[@DH-kx8nd]

@daggerwin u should do more videos on you working on lawns and other things like that I think a lot of people would enjoy that

[@kyranoboyle3378]

Have you seen people on KZbin making ‘homemade’ tractors? Anyways, I think it would be a cool series to make providing that you’ve got all the appropriate tools for the job!

[@jonathanfarms2279]

We have a big work shop to fix are farm tractors and machinery and it is a mess I could do with u around to tidy it 😂 great video 👍

[@mickoostingh5777]

you have a super cute vacuum cleaner

[@archiefowler8]

Can you please do a review on the welder or give me your opinion please. Also where did you get the led lights from? Thank you

[@aledowen9406]

Can you do a updated full tour of all the equipment you own? Thanks

[@DaggerwinExtra]

There is nothing new since the last one except for the Kubota on this channel

[@aledowen9406]

Daggerwin Extra ah I see thank you

[@thenewhollandfarmer3479]

Aye where did the model farm series go to ??

[@littlebear5858]

Best shed i seen u are very good to keep it clean 👍❤

[@thefergusonlover5898]

Hey daggerwin I have a channel restoring my 1949 Ferguson TEA20 got any tips thanks 👍🏻

[@hartteska7961]

Looks great, love watching these videos

[@joshkramer1786]

Nice little shop, I like it.

[@willdsm08]

Hi Daggerwin, you might want to give some thought to moving that fire extinguisher half a metre to the right. Having electrical cables that close could cause problems if you ever need to use it.

[@rmor8198]

I like it it is a good workshop with good tools;)

[@stubbsy8599]

love daggerwin, always has care and attentiopn to detail and everything he does!!!

[@Not_Tony]

Nice setup, daggerwin, where do you learn about machines and things like welding? Ive been trying to teach myself over the years but I still struggle.

[@patricksumner2379]

would love the model farm back. currently making one right now :)

[@FreakinfreakInfreaki]

The graphic air extractor is a quality unit. I have one for model making

[@chrischeltenham]

I must say you seem more and more my ideal man each video I see lol. I love a good tinker myself and you can't beat a nice shed :)

[@lukenicholl7746]

Yessssss nice video

[@AgriculturalLife]

were is the face reveal ? :D no no just joking. Nice small workshop you have. A lot of tools that I also can use :)

[@littlebear5858]

Love everything that daggerwin has

[@animationwizard8374]

Daggerwin has done a face reveal

[@kendal5210]

What a setup! Nice one daggerwin

[@edwardkay]

Are you going to do a more recent one again?

[@diarmuid858]

No workshop works without Henry... I have 2 henries. One in the house and one in the garage... Ya they do work well alrite. Kinda wish they were wet and dry though

[@Ylmorko]

I clicked the like after Henrys whooo :D

[@trainmanj]

How do you access all the orange containers way above the bench?

[@doomsdaydoc6129]

That Henry Hoover :)

[@Whereismy10mm]

First time I've ever seen a mini downdraft paint booth haha

[@zandrevonk3373]

Wow!!! THIS IS AWESOME dagger

[@boerbrabant]

Can you do an update on your forrest walk around and see if trees did dy you planted.

[@Daggerwin]

Yes that is another video coming soon

[@johnkeets6179]

MTD Genuine Parts 490-900-M061 Deck Wash Kit for Lawn Mowersand Tractors 2005 and After i thought you would like this to make life easier

[@andywilkinson3792]

Good luck to to you. I'm having to sell a lot off my projects now. I'v got a high drow tractor wich I was building a loader on and a big log splitter come press very heavy duty thow. And other stuff even a 135 cab not sure what I'm doing with my grey fergie.s yet. I was sirpost to go to a spairs Sall to sell but due to health problems

[@IRTGaming.]

Nicee!!!! Great video Daggerwin!!

[@TomCoulthard1]

Dagger where did you learn to fix the lawn mowers ect as you clearly know about engines as you have the bore kit ect

[@sebtjalsma]

Nice setup Daggerwin.

[@adampyro834]

Hi Daggerwin, i think you mentioned it before once but what sort of places do you go to/look at to find your projects. i have about an Acre of land that needs some attention and future projects hopefully but could do with a little project tractor to make it easier. biggest job i will have is building a driveway on top of grass cutting and possible planting etc... but of course i'm on a very low budget at the moment so need to start 2nd... 3rd or 4th hand lol. If you haven't already done it on one of the projects maybe you could show us how you go about getting a project machine? Thanks , Adam (AKA Pyro)

[@Daggerwin]

One word...Ebay :)

[@adampyro834]

@@Daggerwin wow wouldn't have guessed that. thought it would have been like a special auction site lol. heard good and bad things about Ebay but never tried it myself... might look into it thanks

[@legolino240]

Where did you put £4000 into it 🤔

[@JM538p2]

Daggerwin i have a question can I be in your roleplay series as guy who bought the Peter's farm ??? ( Please reply )

[@CaseMan-jl9mg]

I have a Kubota HST T1400 OVH engine ( 14 HP ) Petrol, Mine looks exactly like yours, apart from a few things like The mat and it dosent have a fuel gage on the dashboard like yours does. but other than that its the same.

[@ikweby9169]

What happened to this channel is it dead?

[@jeroenesyoutubeiets9818]

I have the same rotavater as you have but ours dont cut in the ground di you have any tips

[@heavymachinery2843]

Very nice little shop

[@markjones7778]

Can we have a garden tour please that would be amazing

[@seanscumbag]

An Englishman with shed full of tools, next will come a boutique sports car company.

[@robbierobertson7607]

Are you a full time you tuber now? Ps love the shed.

[@sharronwhite2338]

Daggerwin you should start a farm

[@dawsont933]

nice

[@FullCourseRacingDK]

I was like: "I wonder when we're going to see his face, all we've seen is his hands!" and then at the end you say "...and not something like: Where's the face reveal"! Perfect end to the video! Thanks. :D

[@antonyevans9772]

His face has been on videos before anyway

[@Tomhellyer]

Great!

[@timbell5433]

Where do you get the second hand lawn mowers

[@animationwizard8374]

Ebay possibly

[@MatthewJones-fg7tr]

When is the next video of you land coming out?

[@ajschannel4498]

How you doing nice workshop man looks really nice.

[@Daggerwin]

Thanks

[@redeemedfarmer2670]

Daggerwin LOVE orange......should call him Mr.Orange

[@Dragonballguy270]

I thought you built a new workshop last year or was that a tidy up of an old workshop? It was much bigger

[@owenmi11s13]

What happened to the model farm build

[@Farmer_El]

I wish I had room for a workshop.

[@timzeinstra]

When you oppened the toolbox everyone with OCD clickt away😂😂

[@patricksumner2379]

where's the model farm at?!

[@rhys71racing4]

Hi is there any way I can contact you I just have a problem with my mower and need some advice

[@joshchiaramonte2709]

Hi daggerwin can I be cheeky and ask for the price of the jump pack and how you find it I'm looking for one to carry in the works recovery truck do you just use yours on the compact tractors?? Would you recommend your jump pack or not Thank you

[@victorvanaelst3442]

Have a look at sealey.co.uk lots of great tools on there

[@Trevor_J_Neville]

did you make your own work benches or did you buy them?

[@gaylelucey9532]

I have a desalt drill

[@littlebear5858]

I wish the shed was in my farm

[@olivermansfield8341]

There are 150 boxes

[@Simul8Gaming]

My toolbox has 3 things in it... a hammer, some WD40 and some Duct Tape 😅

[@animationwizard8374]

The essentials

[@peacockealot]

Silicone and silicon are two very different things and should not be confused!

[@dude7756]

The fact that you have all this kit - did you go to college and train as an Ag-Engineer or mechanic?

[@tomthumb4503]

shame you didnt make a video building your new workshop

[@timothycole9232]

Why does he sound like Dennis Jenkins from the survival series on Letton farm

[@animationwizard8374]

Because he is dennis

[@38klootzak]

Clarkson hammers reference ;)

[@maureenpark8229]

very good video but what would be better is a steering wheel tour and where the magic happens

[@Jds-qi4tx]

Where is the model farm build I

[@barrywever9984]

What's your Job?

[@animationwizard8374]

Farming simulator

[@barrywever9984]

@@animationwizard8374 no in one of his videos he said he has a job apart from KZbin

[@katya7918]

Machinery tour?

[@justinbryce9222]

Please daggerwin make another video

[@royk007]

4 dollar upgrade you mean?

[@conorlillis1488]

What vehicle do you drive

[@chrisdenman5519]

From what I remember a Toyota pickup truck

[@conorlillis1488]

Mexicansofa did he say it in a video

[@chrisdenman5519]

We was chatting in his discord server

[@lukesvideos9127]

He said Toyota hilux on his live stream

[@sammcdowell1447]

You did not have bearing pullers it would handy thing to have

[@Daggerwin]

Those are in the red boxes :)

[@NHT-vw3yp]

I think silverline is great

[@bigmo44030o]

It look like a video game

[@gaylelucey9532]

I have a dewalt drill

[@lachygoldsworthy4226]

2:20 more like a 6 pack haha

[@thomasallen8128]

Do the modle farm series again

[@danielschuurmans2547]

What is your workshop size in meters?

[@Daggerwin]

3 x 5

[@danielschuurmans2547]

@@Daggerwin that not very big. In a few weeks i have kinda the same soze workshof for my moped

[@danielschuurmans2547]

@@Daggerwin love you vids btw😁

[@littlebear5858]

U are my best daggerwin and do u have steam please reply thx 👍

[@oliverfox8997]

Instead of using hitachi use makita it maybe a bit more expensive but it well worth it

[@erikponciano]

FS 19 looks SOOO real.

[@geoffdempsey9938]

Hi dag do u have a welder

[@stoves92]

Did you watch the video? He showed a mig welder.

[@geoffdempsey9938]

Oops commented before I finished the video

[@patricksumner2379]

Model farm. Model farm. Model farm. Model farm !

[@chrisdenman5519]

(This is intended as a joke) But omg you used a socket to instal a barring when you had a hydrolic press I mean I would never do that I just ruined a Westwood deck shaft by beating on it so hard cause it didn't come out

[@Daggerwin]

Yeah I would never want to hit a shaft with a hammer...unless it was a copper hammer. I read you comment again...I didn't use the press because the hubs are stuck in the deck.

[@chrisdenman5519]

Teah i know but ive got three decks only needed 2 and it was siezed fast and the copper hammer was a goor 5 mintues away 😂

[@Daggerwin]

lol whatever works for you :)