Drill press Table - Woodworking

[@ChrystianGuy]

This is, by far, the best drill press table video on the Internet. If you are building a table for a drill press, chances are you have a good idea how to build it. This video is about the functionality of that table. Thank you so much.

[@WorkshopCompanion]

Most welcome.

[@erkl8823]

But how does one go about copying *exactly* the table Nick has here??

[@TOT3m1c]

​@@erkl8823buy the plans from the link in the video description.

[@janvanderwesthuizen8345]

English is my second language. You speak so clearly, I can hear and understand every word. Thank you for showing us this great idea about the drill press. Greetings from South Africa.

[@WorkshopCompanion]

Most welcome, and Hey! from Ohio.

[@oldb-1kenobi]

This episode was so reminiscent of the late afternoon programs that came on every Sunday that I used to love to watch when I was a kid. Thank you.

[@thomask4836]

Nick and Travis, You guys are so amazing! This is the best drill press video I have ever seen. I am not worthy. At 66, I have been woodworking for 50 years now and still learn every day. Thank You, Tom K.

[@WorkshopCompanion]

It's what happens when you take a long, deep dive into a subject you love. And I sometimes get the sense that the accumulation of knowledge goes had in hand with the proliferation of questions, so that no matter how much you know, there's always something you need to learn.

[@Dutcharmytent]

As an engineer retired with a drill press in my garage, this video suggested to me is perfect in every way.

[@WorkshopCompanion]

Thanks for saying.

[@Prophet22]

If you are the same guy who put out a book series called the Workshop Companion, I had the whole series as a kid. 40 years later I am going to start a woodworking class for my high school students here in our small missionary school in Brazil. Glad I found you on video! Your dedication to this craft is now going to inspire a group of Brazilian teachers!

[@WorkshopCompanion]

So good to hear. Tell your kids I wish them well. You too.

[@kirkkendrick1226]

Hi Nick. Kirk here, or Cold Creek Craftsman. Thank you for your videos. I am a professional but still find your videos helpful. Loved the idea of turning my drill press into a pocket hole jig.

[@useyourmind4405]

Your instruction and presentation are just fantastic. How am I only seeing you now?! Keep up the great work.

[@WorkshopCompanion]

Thanks for the kind words. Visit often.

[@claytonartibee3410]

@@WorkshopCompanion 99999999999999

[@scottmartin7717]

Same bro... I've been watch a heavy dose of woodworking yt for about 4 years and it just rec'd this to me last month

[@woodshopnerdery]

I've stopped clicking on KZbin videos with titles in the form of "The last XYZ you will ever need" or "The Ultimate XYZ " or "Genius Idea for XYZ" or "The Best (or Nicest) XYZ you've ever seen." I broke my rule for Nick Engler and I am really glad I did. Unlike most hyperbolically title videos, this one does not disappoint. In fact it really could be the nicest drill press table! I don't know what I am more impressed with, the design, construction, or presentation. Very nice work all around. For the purpose of setting the table tilt, would it be possible to add a large fender washer either flush with or just below the melamine veneer to accommodate magnetic angle finders such as the ones made by Wixley? I don't own such a gauge so am not certain in which axis relative to the magnets they can measure angles, but depending on the capability of the gauge could it be sufficient to adhere some washers to the side of the table so the work surface is not interrupted?

[@WorkshopCompanion]

Believe me I'm with you on the whole "Nicest or best, Ultimate, top 5" thing with youtube titles and I've tried to avoid doing that for any title on our youtube videos because it sounds like clickbait and its misleading or at least an opinion. But that is the name of the game with youtube. In order to keep these video's from going stagnate and being seen in search results we've had to up our game with keywords and unfortunately adding titles like this is one of the only ways to separate our video from the other 10k videos over drill press tables on youtube according to Tube Buddy and Vidiq. Trust me "Nicest" is not the word I would choose on my own.😂 As far as inlaying washers under the veneer that is a fantasic idea, we generally use a Vixon style inclinometer but push the phone one because if you have a smart phone then you have an inclinometer. - Travis

[@woodshopnerdery]

@@WorkshopCompanion Hi Travis, no judgement here on the title, especially because the video backed it. If you don't play the YT algorithm, then the YT algorithm will play you.

[@WorkshopCompanion]

@@woodshopnerdery Actually, it's more like if you don't play the YT algorithm, then it won't play you. ;-) Just wanted to jump in here and say that I agree with both you and Travis about the overuse of superlatives. And the choice of "nicest" for this video was particularly cringeworthy, at least for me. Every time I read it, it has the same effect as scraping my nails across a blackboard. But research showed us that "nicest" was a better choice than "best" or "great." During my writing career, I've designed and built several of these tables, each one a little better than the last. And I already have an idea for an even better (nicerest?) drill press table -- the design evolves with experience. So if I was being entirely honest, algorithm be damned, I would have titled this vid as "pretty good."

[@billbrissette7673]

I've had some great teachers through the days and worked at a lot of shops, and this is one of the best and simplest table designs I've come across. can't wait to build one.

[@WorkshopCompanion]

Thanks for saying.

[@LoremIpsum497]

“Workshop Companion” is the one stop woodworking channel in my opinion. No need to search youtube for info that may be accurate or may be misleading, you just need to search this channel, no fluff and no fads but straight forward and all you need to know. I still can”t believe its free

[@johnperry5237]

I have been working with wood, tools and in workshops nearly all of my long life. I have to say that not only is this video a superb explanation and guide (forgive the pun) to the most versatile and worthwhile addition to a drill press I have ever seen. Much respect from an old "chippy" and thank you for taking the time and trouble to post.

[@WorkshopCompanion]

Most welcome.

[@cassidymedicinehorse2686]

I so very much wish that I had you as an in person 10:13 instructor. I have watched all the KZbin videos that I can find and I want to thank you so very much for your clear and concise explanations concerning woodworking. I am a rank amateur and you have helped me so much. Thanks again.

[@BDL090754]

Seen a lot of these, but this one wins hands down, Thank you

[@WorkshopCompanion]

Most welcome.

[@brave_ulysses5958]

@6:15, Storage of the fence, EXCELLENT!

[@Oh6Torch]

One of the most comprehensive woodworking drillpress videos I’ve ever had the pleasure of watching. Thanks for sharing!!!

[@WorkshopCompanion]

Most welcome.

[@JustinShaedo]

This is a truly amazing channel. I find it so easy to really see what, how, and why you're doing what you do. Respect to you.

[@WorkshopCompanion]

Thanks for your kind words.

[@FishmanEricRussell]

I really liked your dowel peg tip for getting regular spaced holes. Thanks!

[@WorkshopCompanion]

Most welcome.

[@frankenberry9670]

When I saw the title I thought of a Shopsmith in Drill Press mode. Other than rack and pinion adjustment your jig has it all. You have inspired me to make one for the local community centre wood shop which has a metal working drill press complete with all the frustration you mention.

[@WorkshopCompanion]

Thanks for your kind words. And good luck.

[@MSC-101]

Not sure why I enjoy your videos so much. Maybe it's because of how you talk and what you say; natural, believable, usually anticipating my thoughts as I follow along. Most likely it's because you are experienced and know what you're talking about. I've seen earlier videos on the Shopsmith channel (would like to have their planer) and you've definitively improved and look forward to your next video. You're the mentor I need. Many thanks.

[@dsigetich]

Wow! The front to back tilt is terrific! I needed to drill a bunch of holes sloped at 5 degrees and had a difficult time. I sure wish I saw your video before I built my drill press table! I made a fence that doesn’t need T-track slots, but yours is better. Now all you need is a way of adding a replaceable sacrificial pad so you don’t damage your beautiful top. Thank you for this video.

[@WorkshopCompanion]

Most welcome.

[@suryodayanthyagarajan9207]

I always have a habit of clicking the 'Like' button usually at start of the video, in order not to miss my registration of appreciation for the 'content-uploader'.. With your videos sir, I know it'll be worth my while at the beginning itself.. And it is indeed, this time as well.. Thank you so much.

[@WorkshopCompanion]

Most welcome. And thanks for your kind words.

[@patrickkelly7085]

I have no aspirations to own a drill press but you had me enthralled with this instructional video thank you.

[@johnrice6793]

The tilt is very ingenious - that’s cool! The ideas you have swirling around ….. 👍👍🤜🤛

[@WorkshopCompanion]

Thanks, John.

[@ryancheney7772]

This table is better than most I've seen on youtube!

[@ugosmith7529]

This video is definitely going in my projects and jigs playlist. Love the ingenious design of the front to back tilt.

[@WorkshopCompanion]

Thanks.

[@A6Legit]

8:20 This video is the gift that keeps on giving. I was just wondering how repeat spaced cuts would be possible and this is it... Thank you

[@mheermance]

I just bought the plans for this and highly recommend them. They're incredibly detailed and look easy to follow. Hopefully I will follow throughout and actually build it.

[@WorkshopCompanion]

Thanks for the endorsement. And good luck.

[@lesblack413]

Great additions to the humble drill press Nick. The use of the dowel and stop would be good for a line of holes also. Generally incremental errors to spacing would not be a problem, unless measurements between multiple holes was a priority. I'm definitely going to fabricate the tilting top because it is often impossible to get 100% vertically accuracy with the factory cast iron top from front to back. The dust collector is a necessity - as so much mess is created especially when using large forstner bits. Great video and narrative also Nick. Thanks!!

[@WorkshopCompanion]

Most welcome.

[@jt9498]

Fantastic! This is how a woodworking drill press table should always be built! I love it!

[@WorkshopCompanion]

workshopcompanionstore.com/products/drill-press-table-plans ; but I'm guessing you figured that out already.

[@leozmaxwelljilliumz3360]

Every video of yours that I've watched so far tackles a "head scratcher" issue I've already had haha. Guess that comes with all the extra years you have on me. Necessity is the mother of all invention haha

[@WorkshopCompanion]

Head scratching is exactly the reason my hair is so badly behaved. ;-)

[@marklapointe2747]

Just finished the drill press table and dust collector. Awesome plans. Can't believe what Ive been missing.

[@WorkshopCompanion]

Thanks for saying.

[@deborahelliott8460]

This is sooooooooo cool! As I grow my shop, this will definitely be implemented to my tools!

[@jamesedwards1528]

I'm glad I found this channel

[@David-hm9ic]

OK, I liked you from about 3 seconds into the video. First time I've seen your channel; subbed. I find your presentation far more useful than the typical "how-to" videos. I like being presented ideas much better than being shown how to run a piece of wood through a table saw.

[@WorkshopCompanion]

Thanks for saying... and welcome.

[@johnx9318]

Great project and presentation - again! Love the dogerlude too!! Thanks.

[@WorkshopCompanion]

Most wel;come.

[@bunnyniyori6324]

Congrats, since watching woodworking on KZbin, THIS has been the best video ever to watch. You are as smart as you think you are :)

[@WorkshopCompanion]

Thanks for saying.

[@MrWenglish]

An outstanding video presentation. I love your clear and well practised voice and the excellent quality of your presentation. The product itself is outstanding too. Such a clever bit of kit. I am delighted to see that the plans I purchased from you meet the very high standards you already set on your visual demonstration. Now I have my work cut out to replicate such an ingenious project. Thank you so much. I love it!!

[@WorkshopCompanion]

Thanks for the kind words.

[@garethbaker3429]

I have that exact drillpress, I bought it secondhand, I was thinking of upgrading it but I am definitely keeping it now!!!!

[@MrMechislav]

Thank you so much for valuable advices. And what a wonderful assistant you’ve got!!

[@WorkshopCompanion]

Most welcome...from both of us.

[@eb9338]

Very cool guy, calm and precise without all the show off. And he likes dogs!

[@sburgos9621]

I’ve seen a bunch of drill press table videos but none that mention the tilting top, how to drill round stock without a specific jig or how to do pocket holes. Lots of great information here.

[@WorkshopCompanion]

Thanks.

[@lousuchon161]

best video I have seen in months Thank you

[@warrensmith2902]

Great video. I use my largest foster bit with some left over melamine to get my table surface to zero. Recently I Drilled a set of 20mm hole on the top to allow me to use my 20mm and 3/4" accessories. I was surprised at how useful this could be.

[@lauramarshall6376]

This is perfect. I got a used drill press that works great, but that tiny table will definitely not work. Thanks for this video. And... your dog is beautiful.

[@WorkshopCompanion]

Yes, she is -- 16 years old, but healthy and (somewhat) alert.

[@Captblue715]

This is the greatest idea yet! Love the duct collector

[@WorkshopCompanion]

Thanks much.

[@A6Legit]

So glad I found this video. That design is genius with storage

[@WorkshopCompanion]

Thanks.

[@peterbarlow8912]

When I extend my dust ducting to my drill press I’m definitely going to make something similar to vac away drillings. Once I made a 70 degree jig for forstner drilling a finger pull into a sliding lid.

[@gerarddelmonte4205]

V good! Will have to do similar when I get my replacement drill press for my new shop.

[@phantomyshkin]

Genius! I've been making do with my drill press table for way too long.

[@MrMarkpeggy]

Thanks for the great video Nick. I love my Shopsmith drill press, but really enjoyed this and learned a couple of things.

[@flashcraft8287]

Regarding a drill press vise. "Which we need about every five years." This guy is funny. I like him.

[@davedaniels8211]

Some very useful ideas especially the sequential dowel spacing .

[@ahorton6786]

That's my weekend sorted!

[@eduardobanzhaf4417]

your explanation of way to do setup squaring cuts are easy to understand it helps a lot thank you

[@WorkshopCompanion]

Most welcome.

[@dave_ecclectic]

0:42 I've noticed so many make a new top out of wood then they attach it to the old metal table by various means. I have also noticed a lot of drill presses use a pipe for mounting to the swing and tilt gadget on the column. if it is within your abilities, I say attach a pipe to the new (wooden) wood working top and plop it in place, this also allows you to swap it out for the original metal top if you wish. Just one extremely simple method is to glue up several layers of ply and hole saw a hole through them, then glue them in place and plop your pipe piece in. BTW there is already a tilt on the original mount. 2:22

[@cheeseheadfiddle]

Really good. I wished I lived across the road. I wouldn’t leave you alone for a second!

[@essextwo]

This was very informative

[@arristo]

Full of heart and love.....thank you so much.

[@WorkshopCompanion]

Most welcome.

[@MG-vo7is]

Brilliant! Thank you!

[@jimsjacob]

That was a great production! Very ingenious solutions too. The dog at the end was a nice ending too. Thanks for producing this!

[@WorkshopCompanion]

Most welcome.

[@r.mercado9737]

A true craftsman!

[@richardlibby2407]

This is brilliant. Especially the fence storage

[@WorkshopCompanion]

Thanks for the kind words.

[@dfu1685]

Yet another superb video and project! You sure have a gift. Thank you for sharing your wisdom and skill!

[@WorkshopCompanion]

Most welcome.

[@MD-en3zm]

That tilt mechanism is really clever - very cool idea. I may try to add that to my existing table!

[@WorkshopCompanion]

Thanks for saying.

[@huejanus5505]

Another great idea. I’ve seen so many videos with ‘great tips’ that are irrelevant to me, yours are very practical. The only change i would make to this top would be to inlay a sacrificial wood block. You could even flush it using your router jig from another video.

[@WorkshopCompanion]

Thanks for your kind words, but I disagree with the need for an inlaid wood insert to protect the table. If you have a fixed piece of sacrificial wood, you cannot easily use it for backup. I keep several pieces of scrap plywood handy not just to protect the table, but also to backup the work and prevent tear-out when the drill exits. I move the plywood just a little bit between each hole drilled so the work always has a fresh backup surface.

[@UppsalaSal]

The dowel stop for repeating hole is pretty clever.

[@robertjames-life4768]

Just made one of the dust collectors, it’s awesome!

[@WorkshopCompanion]

Thank you. We find it handy for lathe turning as well -- I just fasten it under the tool rest. It only gets about 50% of the shavings, but it greatly reduces the dust in the air when sanding.

[@andyfarmer759]

i love the fence storage solution. Thanks for sharing.

[@WorkshopCompanion]

Most welcome.

[@mantaship]

This is too good to be free. I am making these this weekend. Now I am going to go check if it's my birthday and no one told me...

[@WorkshopCompanion]

Thanks for saying.

[@pablen808]

Qué capo que es este tipo! me vuelvo loco

[@garybouck3389]

Best addon ever. Great build. Thanks.

[@WorkshopCompanion]

Most welcome.

[@Hawthorn-nz]

Just brilliant - especially the round stock drilling feature!

[@WorkshopCompanion]

Thanks for the kind words, Chris.

[@iliashurygin1721]

One of the most ingenious videos on the subject. Invaluable information, excellently presented. Thanks, thanks, thanks.

[@WorkshopCompanion]

You're welcome, welcome, welcome.

[@patjackson1657]

i love your tilt mechanism. Thank you!

[@TheCaesar32]

Smart and simple idea! Thanks

[@MrSeminole77]

love this guy

[@dieterk9568]

ingenious, as usual ☺️. Mine is held to the iron table with neodyme magnets glued into the bottom of the table. And kept in position with wooden strips fitting the grooves of the iron table. So it's easily removable.

[@WorkshopCompanion]

Good idea for a shop where you do both woodworking and metalworking.

[@martyjosephson4937]

Excellent video presented like a true teacher, thank you,

[@WorkshopCompanion]

Most welcome.

[@edtsch]

I totally need to do this.

[@Omapk]

That tilting mechanism is exactly the idea I need for a tilting tabletop I'm making.. way easier than trying to make a 180 degree compass with a slot in it.

[@WorkshopCompanion]

Glad to have been of help.

[@fayz44awad]

great teacher .. thanks

[@Exiledk]

Blown away... Superb.

[@WorkshopCompanion]

Thanks.

[@frankhill9527]

Great content, and advice on getting more out of current tools. Reminds me of my shop teacher's from the early seventies when metal, woodshop and drafting were standard part of curriculum.

[@WorkshopCompanion]

Thanks for saying.

[@gernotkircher3212]

Very simple and usefull! Many thanks from Austria!

[@WorkshopCompanion]

Many cheers from America!

[@bradleytuckwell4854]

What a great setup it’s so much better than having to put a vice on the table.

[@WorkshopCompanion]

Absolutely. Much more versatile.

[@mhansome1]

You are extraordinary sir! 1st time I have viewed your channel, but not the last.

[@WorkshopCompanion]

Thanks and welcome

[@russellcasperson6695]

I feel really stupid after making my drill press table this one is so simple and works so much better

[@ProtoNeoVintage]

METRIC LAND ROCKS! I just inherited that model of drill press. Guess I have a new project for the spring. Come for the wood tips, stay for the dog.

[@WorkshopCompanion]

Love the old Cummins. Good luck.

[@532bluepeter1]

There is a useful small modification that can be made to this table. If a well routed in the centre an insert of ply can be let in. This sacrificial piece of ply can be disposed of and a fresh insert used for the next operation. Ragging on the exit side of the hole will be minimised and the risk of damaging the table is significantly reduced.

[@WorkshopCompanion]

See my thoughts on this subject in my responses to Bill Wilson, Hue Janus, and Tiny Planet Adventures.

[@malcolmhodgson7540]

Just perfect in every way

[@WorkshopCompanion]

Thanks for saying.

[@icecreamtruckog3667]

Nicely done.

[@edwardwilliams9923]

Awesome video and work!!

[@rafaelrestrepo2436]

Wow. What a special video and jig. Thanks for sharing. Very useful.

[@WorkshopCompanion]

Most welcome.

[@meangreen7389]

Your vid was simple, instructional and effective. Thank you for sharing.

[@WorkshopCompanion]

Most welcome.

[@trev2417]

Brilliant video

[@mheermance]

That is an impressive drill press table. I especially like the tilting function. I have been thinking about buying a used ShopSmith to get something like that.

[@WorkshopCompanion]

I've made several drill presses from old Shopsmiths -- took the way tubes off the carriage and fastened them to cabinet bases with U-bolts. Works extremely well, but you have to weight the bases because otherwise the large headstock makes the machine top heavy. As far as a I know, Shopsmith is the only tool manufacturer that makes a drill press (or something that converts to a drill press) that is properly designed for woodworking.

[@evanbegin]

You sir, have a subscriber.

[@WorkshopCompanion]

You sir, have a thankful host.

[@adamali7840]

Just stumbled onto your channel last week. I run a Makerspace and am always looking for ways to improve our shop. Your channel is great resource. Thank you!

[@WorkshopCompanion]

Most welcome.