Drill Press Chisel Mount

Ever need to do some precision cutting with a hand chisel? This ingenious jig mounts a hand chisel to your drill press and lets you use the quill to advance the chisel in perfectly straight path, and then stop it at a precise point. This can be extremely useful for both joinery and inlay. Nick shows how to use the "drill press chisel mount" to clean out a square mortise and create a groove for wire inlay.
We offer the plans for the Drill Press Chisel Mount at workshopcompan... .
If you'd like the plans for the Drill Press Table shown in this video, they can be found at: workshopcompan...
To see all of our videos and SUBSCRIBE for more, see: / @workshopcompanion .
Also visit the WORKSHOP COMPANION GENERAL STORE where we offer a wide selection of Nick's BOOKS and PROJECT PLANS in digital format: workshopcompan... All our plans are in both Imperial/English and metric measurements. And you can pick up one of Nick’s books FREE just for visiting!
To follow us on social media, try:
FACEBOOK - / workshopcompanion .
INSTAGRAM - / workshop_companion
For our non-English-speaking viewers: Closed captions can be set to any language. Click on “CC” (Closed Captions) at the bottom of the screen to turn them on. Click on the gear (Settings) and a menu appears. Click on “Subtitles/CC” and another menu will appear. Click on “Auto Translate” and a menu of languages will appear. Click on the language you want for the closed captions and you will be returned to the video -- closed captions will appear in the language you have chosen. If these captions cover up some of the action, place the cursor over the captions, press and hold the left mouse button, then drag the captions to where you want them on your screen. Release the mouse buttons and they’ll stay there.
Para nuestros espectadores que no hablan inglés: los subtítulos se pueden configurar en cualquier idioma. Haga clic en "CC" (Subtítulos) en la parte inferior de la pantalla para activarlos. Haga clic en el engranaje (Configuración) y aparecerá un menú. Haga clic en "Subtítulos/CC" y aparecerá otro menú. Haga clic en "Traducir automáticamente" y aparecerá un menú de idiomas. Haga clic en el idioma que desea para los subtítulos y volverá al video; los subtítulos aparecerán en el idioma que haya elegido. Si estos subtítulos cubren parte de la acción, coloque el cursor sobre los subtítulos, presione y mantenga presionado el botón izquierdo del mouse, luego arrastre los subtítulos a donde quiera que estén en su pantalla. Suelte los botones del mouse y permanecerán allí.
Our Music is Licensed through Epidemic Sounds - www.epidemicso...
And thank you so much for your time and interest!

[@agb1953]

My grandfather was a Seabee in WWII and a master craftsman after. He showed me something very similar to your method almost 50 years ago. To simplify matters, I had a machine shop make me a few chisels of various sizes that did not have handles, but instead had 1/2" diameter or smaller shafts a couple of inches long so I could mount them in the chuck of a drill press. I also had a set made for my grandfather who used them quite a bit, and I got that set back upon his demise. I still have both and have used them many times over the last half century.

[@WorkshopCompanion]

Thanks for sharing. My very first pass at this jig twenty-some years ago was to braise an old mortising chisel to a 1/2" shank, then re-temper the chisel. Not as sophisticated as your design, but along the same lines.

[@agb1953]

@@WorkshopCompanion I know carpentry, not cabinetry and other fine woodworking like you do, but I have been a motorhead since JFK was President, so knew and still know folks with machine shops who have done considerable metal work for me. That's why I defaulted to having one of them make the chisels I wanted. Everybody who has ever seen them (a) thought they were miraculous, and (b) wanted to buy a set. It has surprised me that no one has ever produced them for retail sale. Had the idea been patentable, I would have. However, it would not surprise me if a few folks had some made after seeing mine. You might want to see if you can find a machine shop capable of making them for a price that you could sell them at for a reasonable profit without them being too expensive. Me droog that made my sets said they were ridiculously simple and quick to make. Bar stock on a lathe to turn the shank, mill and bevel the flat surfaces, sharpen the cutting edges, and temper to harden. Ta daaa. Keeping the cutting edge on the center line of the shank would prevent most flexing. Given the size of your audience, I'd bet you could sell quite a few. Many folks would just make their own, but they would love you for having shown the idea to them. I Googled "parts of a hand chisel and there seem to be many that could simply be stripped of their handle and ferrule, and shaping the tang on a lathe might be the only alteration required. I'm supposing you encountered a rectangular or square tang when you explored your add-on shaft method. There have to be many brands with a round tang, and making its diameter uniform would take just minutes on a lathe.

[@johntiefel4248]

Aren't granddads wonderful? I still have several hand planes passed down to me. I do my best to use their strong character as a measuring stick and try to pass on to my grandchildren (28 and growing) the strengths they both had.

[@agb1953]

@@johntiefel4248 As with every other category of humans, some are wonderful, some are not. I only knew one of my grandfathers. He was of the "not" variety. So glad to know you are one of the other category. You seem to be the sort of fellow who should have created a platoon.

[@zubirhusein]

Pretty brilliant. I wonder how some high grade bolts would work if forged square and ground

[@cchoate10]

This continues to be my favorite woodworking channel. I learn something useful every time.

[@WorkshopCompanion]

Kind of you to say. We try.

[@SuperSadom]

This press has worked like a charm for my projects kzbin.infoUgkxajoEbapTfqWaadnqb04h6U576yxXp-FE . I didn't even secure it to my table top, mainly due to the fact that I was using a 15 lbs drill vise. It's not flimsy at all as to what others have claimed it to be. Make sure the locking nuts and levers are secured and there won't be any issues with light pressure and patience. I was able to drill through aluminum, plastic, and steel (steel took a while) with no problems at all. Yeah it took a little longer than a regular drill press, but I don't have the space OR the money for one.The instruction manual was worthless, but luckily assembling the press was intuitive. However, the manual would be good for ordering replacement parts if needed. There is a nice breakdown of the parts that are included in the kit. Before ordering, make sure it is compatible with your unit, it is clearly stated what models the press is compatible with.This was an excellent purchase for $40!!

[@battles151]

The Mr. Rogers of woodworking. Your content is on it's own level. Your character, delivery, and all around knowledge is of deep roots. I enjoy learning all I can from you, all the while being in trance from your entertainment.

[@WorkshopCompanion]

Thanks for your kind words.

[@slavonac5256]

I really like this grandpa.❤

[@MrScottswierenga]

I have neither a drill press or chisels, but I still found this very interesting 🙂

[@acikusej]

Me to😢

[@bradasskg11]

Man you have more useful and practical information in one ten minute video than any other “woodworking” KZbinr I’ve ever seen on this site. Love these videos so much. This stuff is genius.

[@WorkshopCompanion]

Thanks for the kind words.

[@WorkshopGreg]

I was skeptical of how it was going to work at first, but alas, as always - Nick does not disappoint. This is a pretty great way to cut mortises. I'll give it a try next time I need to make some.

[@WorkshopCompanion]

Thanks for saying.

[@LookingGlass69]

I saw the thumbnail and said to myself "what could possibly go wrong!" but then I saw the old man and said "yeah, this man knows what he's doing"

[@1kwgentil]

I laughed so hard when he said to make sure the drill press is unplugged, or things could get "wildly exciting". 😂😂

[@matthewstanton9633]

Outstanding!! I've watching thousands of wood working videos and thought I'd seen every "genuinely" useful workshop tips this is something thing will most definitely build

[@grumblycurmudgeon]

I sincerely love everything you put out.

[@gailpengelly8581]

Oh good grief! YOU ARE AWESOME! Thank you so much for sharing your wisdom! This is priceless! Greetings from Plymouth 🇬🇧

[@WorkshopCompanion]

Thanks for the kind words

[@rashidtayidi8370]

Absolute Genius! Love to watch Nick performing creative magic ....

[@WorkshopCompanion]

And we love to have you watch. Thanks for saying.

[@johntiefel4248]

Well, you did it again. You keep piling on to my inferiority complex. 75 years old, 60 years in the construction industry, and I would have never thought of using a drill press like that. I can use this tip today.

[@WorkshopCompanion]

Sorry about that...but glad to have been of some use.

[@LoremIpsum497]

I still don’t understand why this channel doesn’t have over a million subscribers. Probably the best educational woodworking channel i’ve come across yet with extremely valuable info. great production quality too, but the knowledge shared here is invaluable

[@WorkshopCompanion]

Nice of you to say, but don't worry -- we're on our way.

[@LuisCasstle]

Great advice. Love the south park style illustrations.

[@bobsnow1996]

I've had a Shopsmith for 40 years, also I have many of your books... I'm more a fix it, build it, repair it guy with some wood working skills. In my old house I had a pretty good shop, but now I'm in a Shop/Garage atmosphere learning to make it in a smaller space. I use my Power stand more than my Shopsmith mainly bandsaw, Jointer... I got a second hand Rigid Table saw and spent time tuning it up and it works like a charm. I do enjoy your "you tubes" and learn a lot... it's good to now tie your books to a face... keep up the good work!!!

[@ericlipps7152]

Thanks for bringing smiles to the woodworking community.

[@WorkshopCompanion]

You guys are a great audience.

[@davidlovell4390]

Clever , very clever!

[@wmcrosbyesq]

This was terrific.

[@mikewilcox8866]

Thank you sir for someone who shies away from mortise and tenons because I am not very good at it ,this is a fantastic idea. Keep up the good work, and thank you for the way that you teach. 👍

[@WorkshopCompanion]

Most welcome.

[@roberthalaska3030]

Nick you are fantastic Keep up the good work

[@WorkshopCompanion]

Thanks for the kind words.

[@eaglestu6639]

I'm from the UK thanks Nick always informative and great tips 👍

[@WorkshopCompanion]

Most welcome.

[@SantiagogranadosR]

So glad I’ve found this channel. Thank you!

[@WorkshopCompanion]

Most welcome.

[@ianpearse4480]

Ok, that was novel. Fantastic share. Thank you.

[@larrystevens9635]

Great on the inlay, thanks.

[@bobbypettersen1851]

Never to old to learn new things. Thank you so much. Love it... Best regards from Norway.

[@midnightfm87]

Best woodworking video I’ve ever seen, hands down. Entertaining and informative. Love it!

[@WorkshopCompanion]

Thanks.

[@jrodriguez1374]

I've supposedly been doing this as a hobby for a few years now. I'll be damned if this didn't humble me! Thanks so much for these awesome videos!!

[@WorkshopCompanion]

Most welcome.

[@sylvainlopes3053]

Everytime I watch one of your videos I learn something new. Thank you (and your team?) for your experience and your love to share all this knowledge.

[@WorkshopCompanion]

You're right, I have a team. Couldn't possibly do this well all by myself. Our producer and editor is Travis Blair, who in addition to being a dynamite filmmaker, is a gifted craftsman in his own right. Heather Knopp is our marketer, and Mary Jane Favorite is everything else. Then of course, at the top of the ladder, there's Bella, our shop dog. We all say sincerely, most welcome.

[@BobBlarneystone]

I removed the handle from a chisel with round tang instead of a socket, and then chucked it up in the press. It worked for me. Also, for the cloisenne wire, one could substitute guitar fret wire, which has tangs to grip walls of the groove.

[@MrFlint51]

Fret wire would give a different result. It would stand proud of the surface because it is T-shaped.

[@leighchristopherson2455]

Brass shim stock is available in a variety of thicknesses, and widths. None as narrow as the "wire" that he displayed, but if you intend to do a lot of inlay work, a roll might work out cheaper than the wire. You might also be buying a lifetime supply in one stop.

[@micklatham3425]

I was thinking about doing that too.with some old chisels of mine.but wasn't sure if it'd work.glad you helped me make up my mind.ill do that.thank you 😉

[@wolverine1694]

A chisel chucked in the drill press would cancel any wobble also... I like it... God bless

[@Castle6064]

Cleverest jig I have seen in a long time. Impressed!

[@WorkshopCompanion]

Thanks.

[@lathamgreen]

The magic of a perpendicular

[@timd5343]

thank you great idea will make mine

[@lesblack413]

Neat jig Nick. Your videos are always so informative and user friendly to watch. Bit of humor is great also!!

[@WorkshopCompanion]

Thanks.

[@mcorrade]

sweet jig man. I knew there had to be more I could do with my drill press.

[@WorkshopCompanion]

👍

[@canuslupis3343]

This channel is always a goldmine of information, delivered in a refreshing way which helps embed the learning.

[@WorkshopCompanion]

Good of you to say.

[@subhabrataroy2593]

You are so good teacher ! Also funny at the same time. Regards

[@MrPitki]

Best drill stand trick ever, Thanks

[@williamkaiser8490]

OUTSTANDING!

[@rjhcarpentryandjoinery]

This guys a maverick.

[@jamesederer3565]

This is absolutely brilliant

[@royculpepper6506]

Great video.

[@jimbenge9649]

That's so clever I'm surprised I didn't think of it. 😆🤣😂

[@LetMeRetort]

Nick is a great teacher. This is coming from a teacher, so you can trust me.

[@WorkshopCompanion]

Thanks.

[@rancidpitts8243]

Thank You.

[@lourias]

😊 I want to tell you how much I appreciate your instruction. "I appreciate your instruction!" I just had surgery for trigger fingers, carpal tunnel release, and triangular fibro cartilage complex repair. I have a small drill press and some 1x4s which need a mortise! Now, I have a trailer to which i can store my tools... I can say now, "Have tools, and I can do anything, anywhere!!!!" Thank you!

[@WorkshopCompanion]

I feel your pain. I've had nine of my ten fingers surgerized. Carpal tunnel seems to be a common ailment among long-time woodworkers.

[@slomkaadas9603]

Very interesting stuff, thanks for upload. Cheers from Poland 🍻

[@WorkshopCompanion]

Cheers back from Ohio.

[@anderslagerqvist2642]

Fantastic! Now I really need to come up with a need for a mortice. 😀

[@WorkshopCompanion]

If you have a collection of round pegs, they're always needing square holes. Or is it square pegs in round holes...;-)

[@ocuanadesigns]

Every time I watch your videos it brings me so much joy. It's a true pleasure to learn from your years of experience. Thanks

[@WorkshopCompanion]

Most welcome. Those were very kind words.

[@HWCism]

Pretty cool, thanks

[@MrSeminole77]

fascinating and informative sans fluff and gimmickry. Keep up the great high level content!

[@WorkshopCompanion]

Will do.

[@revparisking]

this is interesting but I'm old school. I actually enjoy doing joints by hand. I will admit that I do have a mortiser in my shop but I rarely use it.

[@SkylersRants]

That is just downright brilliant!!

[@uptopmikep7065]

Another option would be to get a few chisels in choice sizes .without the handles that don’t have full length tangs that could be mounted directly in the chuck.

[@jimbo2629]

I was thinking the same but the tapered tang might not satay firm. You might have to turn it parallel first somehow.

[@orbodman]

What a wonderful idea. Making one tomorrow

[@Dragon_With_Matches]

Genius!! Thanks for the tips!

[@jeremymcclanahan2389]

MIND BLOWN!!! thanks for sharing this.

[@WorkshopCompanion]

Most welcome.

[@sapelesteve]

Great video Nick! I would never have thought about doing that! Terrific idea... 👍👍

[@WorkshopCompanion]

Thanks.

[@MCsCreations]

Brilliant, Nick! 😃 Thanks a lot for the tip!!! Stay safe there with your family! 🖖😊

[@WorkshopCompanion]

Most welcome.

[@FGUK1973]

That is an awesome little jig!!! 10/10

[@WorkshopCompanion]

Thanks.

[@thefuryish]

I love watching your videos. Thank you.

[@WorkshopCompanion]

We love having you watch them. Most welcome.

[@TimnParks]

I was lukewarm on the idea until the wire inlay piece. Now I'm sold on building one.

[@WikiSnapper]

Fantastic! I wish I knew this about 3 weeks ago!

[@j.r7872]

Excellent information!!! Thank you for sharing!!!

[@ga5743]

You certainly have a wealth of knowledge under those gray curls. Thanks for the information

[@WorkshopCompanion]

Most welcome.

[@windwalker5765]

Suggested upgrade: to keep the chisel from popping out upwards, modify the jig with wood screws and a piece of hanger strap to go around the handle at its narrowest point. Protect the handle with a piece of garden hose or other sheet rubber.

[@gsilcoful]

Genius.

[@raydriver7300]

Brilliant as always. And thank you for your kind attention 🌞

[@WorkshopCompanion]

Most welcome.

[@ricksevere4977]

You have E always been one of my favorite wood workers always new ideas

[@WorkshopCompanion]

Thanks for saying.

[@ghlscitel6714]

Great idea, Herr Engler!

[@terrygreen6088]

mate i can listen to you for hours you make amazing videos and you are one hell of host thank you

[@WorkshopCompanion]

Most welcome.

[@jwm6314]

Watch Paul Sellers demonstrate cutting a mortise with a chisel and mallet. With a little practice you can do two by hand in the time it takes to set up the jig.

[@jewishmafia9801]

love the south park style of animation for you and your dog!

[@WorkshopCompanion]

Thanks -- we have it done in Ukraine!

[@havabeer1]

Seems like a perfect job for the old hand press/arbor/keyway cutter. Less spinny things to go wrong

[@WorkshopCompanion]

True. If only old hand press/arbor/keyway cutters weren't as rare as hen's teeth these days...

[@SheWhoWoodworks]

Love this channel. I'm always excited when I see another video's come out! Always something intriguing and well explained 👍

[@WorkshopCompanion]

Thanks.

[@gerarddelmonte4205]

Now that is trick. Thanks for posting that.

[@WorkshopCompanion]

Most welcome.

[@RenoScruggs]

This is a stroke of genius

[@WorkshopCompanion]

Thanks.

[@exarkunn69]

Just found this channel, thank you all mighty algorithm. Very cool video!

[@WorkshopCompanion]

Thanks.

[@sammathis]

That's an amazing idea, you have a very flexible mind to come up with something like that.

[@WorkshopCompanion]

My wife would agree. She often tells me I'm bent...;-)

[@uptopmikep7065]

Thanks for another great idea to make tools even more versatile.

[@theswime945]

Thanks as ever for sharing your expertise. The new animations made me chuckle too. Cheers.

[@WorkshopCompanion]

Cheers back.

[@justplanebob105]

One of the most clever ideas I have ever seen. :)

[@WorkshopCompanion]

Thanks.

[@grahamtaylor989]

Brilliant

[@CreativeIdeasMaker]

Hi my friend, your work is great, thank you very much👍

[@WorkshopCompanion]

Most welcome.

[@jbb5470]

Nice presentation and video! Did not realize or even think about using chisels like this. Great tips and thank you for posting this bit of information!

[@WorkshopCompanion]

Most welcome.

[@justbeeeb2061]

Thank You very much! 😊😄

[@WorkshopCompanion]

You're welcome very much.

[@gilmarcordeirojunior1526]

it just blow my mind!!! Great technique! Thanks for share your mastering woodworking skills!

[@WorkshopCompanion]

Most welcome.

[@dlighted8861]

Interesting,I finally got a drill press after only having a belt sander for many years. Its lots of fun. 🤗

[@svenvaniersel773]

thats an interesting way to use a drill press, i have never seen it used like this

[@howler5000]

Nice jig!

[@mountainapple5638]

Another great and useful video, very well done 👍🏼👍🏼👍🏼

[@oqsy]

What a cool channel! How have I missed this? Subscribed!

[@kkuenzel56]

Very cool!!! Never would have thought of that. Love the South Park character of yourself!

[@WorkshopCompanion]

Thanks!

[@toddwilson1230]

Great idea !

[@gracenjuguna7292]

Just learnt I can lick the plug to ensure all the electricity is out! Great video!

[@WorkshopCompanion]

Thanks. Be sure to wash your plugs from time to time.

[@troyclayton]

What a great idea. Thank you!

[@WorkshopCompanion]

Most welcome.

[@bobt2522]

This was another informative video. I enjoy your sense of humor.

[@WorkshopCompanion]

Thanks.

[@flatroc1]

I will certainly sharpen my wood chisels and blow the dust off my drill press now. Ingenious, Thanks

[@WorkshopCompanion]

Most welcome.