Making Crazy Trike 250cc

[@craigengelman4534]

i built one back in 1991 . mine was a honda 25or trike that i built a 72 h2 750 triple and shoehorned in its frame . extended the swing arm 18 inches and put skat trac v paddles on it for hill climbs . i put hoosiers on the back and street drag race it . i raced it for 8 years and won tons of money with it . kids came along and had to sell it . a group of friends went to the hill climbs last month and my beast was there still winning !

[@ИльяИванов-ц4ш]

Я поражен 😮, он как из магазина, Я бы хотел такой-же, круто мне очень понравилось), все мои друзья тоже когда увидели удивились сильно, насколько он профессионально и хорошо сделан! Лайк огромный при огромный👍👍👍👍👍

[@welding_cut]

Выглядит он действительно отлично. И это при том условии, что собран он, по большому счету, исключительно болгаркой и сварочным.

[@СергейКачкуркин-д7х]

на одном дыхании ролик просмотрел МУЖИК !!! у тебя золотые руки и ГОЛОВА

[@ViktorHorn-k1k]

И не только,у него и профи мастерская со всеми нужными станками и инструментами.

[@hamadataful]

في زمن الثخصص الدقيق اصبح من الصعب ان تجد رجلا يحيط بكل جزء في المنتج كهذا الرجل..لديه عقل ملم بكل التفاصيا واياد ذهبيه .ليتني كنت قد تتلمذت عليه. اذن لاخذت حياتي منحي غير هذا..هل ذقتم طعم الانجاز والنجاح تحياتي وكامل تقديري

[@jeffburtard2386]

It is such a pleasure to watch a true Master work! ------ Talk about a hard tail! Rough Rider!

[@kevinsellsit5584]

The definition of "Industrial Duty" is: "Workshop From Scratch". This is the channel to watch for learning the correct way to do the job. This chassis could easily handle 350cc, 450cc or even more. I'll give you a perfect 100% score! When watching someone this good at what he does it is important to take note of the things he does not fabricate from scratch. The lathe work to fabricate the gas cap, for example, exceeded his time value, his time is worth $$$, better to just buy one and bolt it on his beautiful tank. A quick mod to a generic brake pedal was much easier than building one from scratch. Well done! P.S. Head tube design and fabrication puts you miles above the rest!

[@danielfelipe6445]

Quanto custa um triciclo desse se você fazer para encomendas?

[@julietasia1878]

your skill is amazing!!!the machine you're using as well as the tools are amazing too.thanks for sharing.

[@Мастерская82]

Чувак дело супер , от чистого сердца желаю тебе 10 миллионов подписчиков !!! Так как такой труд не всем по силам. )

[@justjackfromsc]

I really appreciate how your videos aren’t an infomercial or you trying to sell stuff. You have really good content and great skills. Thanks.

[@serrysingh]

*I bought this trike so I could play outside with my 3 children. Tricycle **Latest.Bike** is well built and fun to ride. Great purchase overall!*

[@jasper4661]

Great job 💖💖💖💖💖👍👍

[@Sergey.fedin11]

Хорошая работа, отличная мастерская, достойный инструмент плюс руки и голова на своём месте в итоге хорошая игрушка получилась, удачи и больших творческих успехов. С большим приветом из России... 🇷🇺

[@buddyhutchins3782]

Muy bueno tu trabajo y muy bien elaborado. Estoy seguro de que disfrutó tanto diseñando y construyendo esta pequeña belleza como obviamente cuando la montó por primera vez. Saludos desde Anaco, Anz,

[@rajahasian9]

Keahlian yang tinggi didukung peralatan serta bahan yang tersedia menciptakan motor yang berkualitas baik. You are the best 👍👍

[@anthonykinrade8642]

I watched the whole thing without sound so not to disturb anyone, absolutely brilliant, great skill to possess.....!

[@carloslara8067]

He's like a magician, from a scrap to a beautiful trike. Good video. Congratulations on this project.👍

[@jimmydaugherty4295]

Amazing job!! Only thing I would like different is a slightly wider wheelbase in the back and everything a little bit lower to the ground especially the seat you know like an adult big wheel that we all used to have as a child. Love your work dude!

[@nickaschenbecker9882]

They make those. They're called drift cycles. Some are motorized, some electric and some have tricycle cranks on the front wheel.

[@supersevenn]

that would be nice for a rear engine set up

[@БорисРусь]

Класс! Мастер! И всего за 30 минут 😁

[@shawnd753]

I love watching this man work. He’s a mechanical genius

[@nathanmciver6496]

Heros! Seriously! This makes me want to listen to metal music and rip threw some metal! Amazing how fast metal workers can come back to life! Best wishes that's alot of hard work!

[@troyhummon7978]

😯 WOW 😳 Nicely done 👍😎 Solid worksmabship, and nice set of metal working tools

[@victoryfirst2878]

I have to say fella you have a killer shop. Hope one day to have one too. Oh, real nice and fast build.

[@Bar.Bar13]

Super pojazd dla młodszych i starszych! Otwórz produkcję hurtową , dobry był by biznes!

[@АлександрТкаченко-о1ы]

Руки из правильного места растут! Аппарат огонь🔥 получился!

[@parttimetourist]

That was brilliant and the cherry on top was the electric start after completion stroke of Genius👋Cheers PTT

[@parttimetourist]

@@jetharamrabari5739 👍

[@parttimetourist]

Super cool😀

[@llkk508]

All this time I was wondering if you will split the axle, but apparently it is even more fun this way. Great handy work.

[@venumus0471]

All you need now is a small TURBO and you’ll set my friend. Nice job well done. 👍🏻

[@venumus0471]

@@wilairatmuaypimai6414 what did I do I did say small turbo not a turbo with a 150 shot of NOS to spool her up 😜 hmmmm that does sound like fun and broken bones🤙🏻 but if you going to do it do it RITE.

[@ashis_creative_official]

@@wilairatmuaypimai6414 is the first one I

[@ashis_creative_official]

@@wilairatmuaypimai6414 is the first one I

[@ashis_creative_official]

@@wilairatmuaypimai6414 and I have to do this for a long term care is the only time we spoke last

[@ashis_creative_official]

@@wilairatmuaypimai6414 and Jerry I will

[@ДенисЗуев-ф2л]

Браво, дружище! Привет из России! Тоже люблю всё своими руками делать.

[@พงศกรนามไพร-ย1อ]

bài hát rất hoài niệm , nhớ những ngày bồng bột của tuổi trẻ, chút kỷ niệm của tình yêu, lời chia tay vội vàng đúng như cái bồng bột ấy. Đức Phúc cover lại bài hát này tâm trạng quá !

[@JamesSmith-iy5nm]

Dude, you are an awesome builder. Your grandkids are gonna love you if they can make it back alive from a lap around the farm.

[@Каракурт-о2ъ]

Этот чел может собственные бренды техники выпускать и без напряга пречом. Хоть мотоцыклы, хоть трецыклы, хоть автомобили. С таким набором оборудования и рук растущих откуда надо.😀👍

[@sunarnoo2683]

Oke banget 👍👍👍

[@wasnik888]

Интересная работа, интересно было наблюдать за процессом сборки и результатом!👍👍👍

[@камрадпоисковик]

имея такое оборудование в мастерской можно творить, а у меня только сварка, ручная дрель, болгарка, тисы, зубило и молоток. получается не хуже, может не так красиво, но функционально. респект мастеру и уважуха.

[@Lone-Wolf87]

That is a very cool project right there and it includes a lot of fun in the dirt. Great project. 👍👍👍🏆🏆🏆👍👍👍

[@angelicabarba4733]

😃😑😂w😴

[@sudhirhans5707]

@@angelicabarba4733 A

[@AStrangernightApache0864]

My friend you have created a masterpiece , it's one a kind in a classroom by its self . It looks magnificent I love it . I think you should be selling trikes for a living , I'd be your first customer 😊 . Keep up the great work 💯💪👋👍

[@aklana96]

Great my boss... clever mechanic, complete equipment... really cool... success to my boss😊😊

[@george_BANZA]

Радость то какая?!! Молодец мужик! 👍👍👍

[@johnfair62]

Awesome to watch you work. Only thing I would have done different is mount a spring under the seat to rest on in the back. A hinge for the front part and shock in the back to make the ride smoother.

[@ВасилийЯворский-е6ш]

Регулировка.кклапаноа.ваз.2190

[@richardschneider4775]

Great build with skill . A unique trike in any country. In the test ride with the helmet mounted camera you could pass for a space invader on an orange trike. Keep up the good work. Greetings from Connecticut USA

[@darenkent6987]

What an amazing engineer 👍👍 just like KZbinr made in Poland . New subscriber from 🇬🇧👍👍👍👍

[@SgtBrewdawg]

Absolutely beautiful build! Awesome talent 👍

[@antitheist9976]

So cool, awesome build, thanks for putting this out there mate 🙂💯

[@ВикторАпанасенко-й7ь]

Потрясающая машина получилась руки золотые у парня,ай да маладца чувак ❤❤❤❤❤🎉🎉🎉

[@tomnekuda3818]

You are an artist with steel and the welder.....good upload.

[@fredosleepswiththefishes]

awesome, awesome bit of kit, that looks soooo much fun to ride. congrats my guy. thanks for sharing.

[@Akicursosgratis]

Ficou ótimo o projeto. Mas, faltou três detalhes: 1. E necessário um sistema traseiro de diferencial entre as duas rodas para compensação de curvas. 2. Deveria ter suspensão traseiro anti-choque. 3. Assento do piloto deveria ser semelhante ao de moto, achei muito duro. Mas a estética ficou bom. 👍

[@ganeshmalsoni8956]

Very nice bike sir👌👌👌👌👍🌷🌷🌷🌷🌷🌹🌹🌹🌹🌹🌹

[@tolyakoval6741]

Всё вроде ничего, но без бардачка и синей изоленты, это просто груда металла !!! ❗❗❗ ☢☢☢ ❗❗❗

[@КанатИбрашев-у3э]

Чувак это круто!!! Я подписался! У тебя руки и нужного места.👍✌️🇰🇿

[@rogeriobarbosa9218]

Parabéns pelo seu trabalho, muito bem feito

[@rafiquealam203]

@@maimkh8339 ŗd

[@dkpick]

Great build! You make it look easy!

[@Joserocha-wm9de]

It's so satisfying to watch this building these super cool creations , a real high skilled and top notch pro ! With some big wide a$$ wheel guards in back i think it'd get even more sick 👌 I loved it 👌👌👌

[@einblutwolf5356]

Doesn't get much cooler than this... except in a refrigerator. Great work Boss! Real nice!

[@gerhardthiel4948]

Very professional and innovative fine work !! I like it 🔥! ✨💙👏👍👍👍 ‼️😄

[@bobalvarez9278]

That is an awesome build. Congrats. Love it.

[@jarekwieczorek9113]

Dobra robota i fajnie wyposażony warsztat :)

[@WorkshopFromScratch]

Dzięki 😁

[@mojtabairani8654]

Hey man it was great. Only one about the rear differential that it does not have when cornering on non-slip surfaces and the other about safety.

[@vicentetarregavivas1479]

11q

[@AR12-AQUIL]

@@vicentetarregavivas1479 Giraffe

[@ramonlgonzalez]

You are the Best, qualification 100%

[@screwsnutsandbolts]

Awesome build ! 👍

[@SahliLotfi]

If you allow a question about the rear axle which does not have a differential, is there not a problem when there is a turn or the speed of the two wheels is not the same.

[@obenecharles9362]

Good my brother

[@steveunderhill6570]

You need to run enough caster on the front to lighten the contact of a rear wheel when cornering the same principle as a go kart

[@woodbark1008]

I am more of a "Reverse Trike" kinda guy (mainly for the better/safer handling) but watching you ride your creation proves that the standard config works fine ! . . . CHEERS ! on a very fine design/build and of course ; great editing always makes for a fun watch !

[@hilarionpepito62]

How about or how to adjust the chain, no chain adjuster.

[@woodbark1008]

@@hilarionpepito62 Actually there is an adjuster; It's done at the Idler roller (check 17:17 to 17:56 )

[@paulbonner474]

Very cool ride for sure, great workmanship and design. Loved watching you drift it around the yard. You could put a set of slick’s on in the summertime and have a blast on the blacktop. Thanks for sharing Sir‼️👍👍👀👀❤️❤️👏👏🤣🤣

[@bambangbasudewo1087]

Mantab sungguh benar-benar Mantab Apa yg tdk bisa dikerjakan dan diciptakan oleh Putra terbaik Bangsa Indonesia ini Karena memang Sudah menjadi Keturunan Orang2 Pintar dari Nenek Moyang Kita teruslah Berkarya semoga Product nya berkembang dan diakui oleh Dunia Internasional inilah Indonesia nan Abadi dan Jaya selamanya Bravo Bangsa dan Negaraku

[@tesfayt5243]

you are clearly an expert , you realy know what you are doing .

[@williamoliveira2024]

Uma verdadeira obra de arte. Um abraço aqui de Maracanau ce. Brasil 🇧🇷

[@ronaldooliveiradeandradean7165]

muito bom, e o que poucos perceberam é que este motor tem marcha ré, muito legal,o cara não usou caixa de redução externa não, é no próprio motor...

[@ericendres3293]

Percebi, vim nos comentários até perguntar como q ele fez p dar ré kkkkkkkkkkkkkk

[@antoniodonizettiseveriano5454]

Gostei muito de ver muito perfeito tenho vontade ter um desse você trabalha bem

[@coopergt500twin5]

Some professional work here I gotta say beautiful ❤

[@mexlemax3307]

Super Cool Bike! A very good job by you. I like very much. And even I would buy that. Thanks for this tutorial. I wish you still much joy in your hobby.

[@Fabricationskills]

You did not apply the suspension to the rear tires but you could have applied the suspension under the seat. A very good project

[@eViongTV]

That's what I also noticed no suspension even under the seat,. That could hurt your back🤦.. but the whole thing is a great job!!👍👍

[@bakisinsimba3897]

If you can figure the way to add slick mud guards for the back tires, that may be a good idea. You know your stuff. Congratulations. You have a super workmanship.

[@adamdams6688]

Skąd ty na to bieżesz czas Szacun świetny kanał. Bardzo dobrze się ogląda

[@jimmybrown788]

Congratulations to both of you that's awesome thanks for sharing that moment with us all 🎉🎉🎉🎉🎉🎉

[@roberthamm9304]

Brother, that’s one badass scooter you built. Makes me want to build one myself, only I’d put a Harley v-twin on it for the power plant. That’ll definitely turn some heads. Bravo brother, bravo. 🍻

[@grazynazambeanie5963]

Sure am impressed by the workmanship and design . I kinda made a similar machine , but used the front fork and frame from a scooter and a rear half of an old ride on mower , so six speeds forward plus reverse . Great traction from those wide mower wheels , and a differential for tight turns . Sure wish mine was as good as yours .

[@jaberjaber131]

Make another one and add the refined details , this gentleman is undoubtedly a master class fabricator , I'm sure he had plenty of practice to have reached this point. Good luck

[@grazynazambeanie5963]

@@jaberjaber131 only thing mine needs is springs for the rear axle . It's a little to fast for me . Got the lights from the scooter , disc brakes on front wheel . Back brakes aren't that good ( ride on mowers don't have very good brakes , mind you , mowers aren't meant to go roads at 20mph ) I'm really surprised how well it goes

[@magnum357225]

Nice job, really enjoy your videos. One thing i cant seem to understand, why u grind off half of your weld after welding, isnt the structural integrity more important than the visual, or maybe gaping 1 mm each side for the weld to lay more flat?

[@Nishandh_Mayiladan]

Do the extra weld add to strength ? Just curious, noob question looking for inputs.

[@magnum357225]

@@Nishandh_Mayiladan well not adding a gap in between the pieces means u are mostly adding the extra material (weld) on top of the pieces and depending of your amperage also depends how deep u penetrate the material, now grinding down most of your weld will reduce the coverage of your connection and in that strenght. Thats why when ever you do pipe welding you have to make a gap and do first a root weld and then as many passes as nesserary.

[@Болгарин-т5р]

Начал смотреть с таким удовольствием, а увидел заднюю ось без диффрика, и всё упало. И так у прямого трайка опрокидываемость дикая, а ещё и с пробуксовкой колёс будут повороты.

[@АлексейКулешов-р6д]

Ну если кататься по поверхности с слабым сцеплением (снег , песок , грязь ) то нормально и без дифа

[@КонстантинОо-д6ф]

Мне в России надо лет 20 работать чтоб такие станки приобрести и прочие детали и расходники. Пример на лицо,в какой стране какой уровень жизни!!!

[@jarunioo_426]

Majster jak to lata 8 raz to oglądam 😄😄

[@TheEsculap80]

Sztos, masz wielki talent

[@WorkshopFromScratch]

Dzięki 😁

[@maxmaxwellful]

I want to ask "did you have as much fun and enjoyment building it as we have watching you do it?? Great Work!!

[@sleeve8651]

As goofy as it may sound, your sliding around in circles, reminds me of how I would ride in the Summers rain, on a bicycle I made frome a 27 inch English Racer and a 20 inch knobby tire, off the back of a Mattel Varoom bike ! I would ride as fast as I could, then hit the coaster brake, and while balancing on one leg, turn the handlebars, and spin in circles on the asphalt road ! The profile from your Trike, was much the same as my bicycle ! Boy did I get the look's ! Lol ! Hey.... what can I say ? Poor people have poor ways ! That was some 56 year's ago ! Thanks for the memories ! And congrats on a beautiful scooter ! ✌️😉

[@evensenj5670]

you know you have a manufacturing business if you take to a higher level.. looks good

[@phercellnascimento5603]

Ficou top,mandou bem cara,quanto gastou com esse projeto???

[@CanalSHAWBE]

Sensacional esse processo, estou prestes a fazer um só que um projeto elétrico 😉👍

[@markwhitfield5412]

great job, my only concern is that your axle support bearings are too far away from the wheels, you may find you will bend the axle should you land hard or even potholes could bend the axle between the bearings and the road wheel. other than that, it looks like a nice tidy job and lots of fun.

[@BANSHEEBOY_1974]

There is a ZERO % chance, that 1-1/2" axle would bend ,in a 12"-16" span of steel from a 'pothole' down on the farm...and 'land hard' ?!?..Its a It's a FlatTrack/StreetTrike!!! I'm going out on a limb here,guessing this guy won't be launching this badboy off a tripler... This little gem is waaaay to sweet to beat on.

[@scottybear6265]

Incredible you are a master builder and you need to take a vacation my friend

[@carmelpule8493]

Brilliant and meticulous workmanship, where welding with one hand or the other hand used when required. Congratulation.

[@mhirman2216]

I know it's been a while since you did this, but do you have any plans available for it?

[@Nishandh_Mayiladan]

curious, on a hard track, how good would it turn ? (looking at the lack of differential) Really enjoyed the fabrication !

[@tonmaydebnath6700]

।।

[@tonmaydebnath6700]

।ধ

[@adenamsekian5279]

You're talented and did your work professionally. Keep it always improvement. Good luck forever.

[@РафисБ]

Салам Татарстана Вы проста молодец 👍 и этого мало 👍👍👍

[@titinegruta9532]

Super....super video

[@DanielH]

I want one

[@garrysekelli6776]

Eliminates need for lawn maintenance.

[@aaronozjaszowiczszechter9665]

@@garrysekelli6776 same conclusion :-)

[@xanitoxanito193]

Me too

[@MCsCreations]

If I had the money... 😬

[@hibahprice6887]

I want two

[@antoniogomesoliveira6705]

Muito bom o projeto!

[@kevinbee1006]

That thing is just wicked......does it come with rubber underwear? I may need them for the test ride....lol

[@alejandropalaciosoliva1477]

Alguien que me haga un DAP le roto 2 sho

[@davidvidal3284]

x2

[@estefanocespedescruz7274]

x3

[@maximilianodanieladrianzen8738]

x4

[@عليسعدي-ف1ه]

تصميم جيد جدا . مع عمل وتلحيم بكل القياسات . تحياتي صديقك من دولة الجزائر

[@РоманГоловков-л5л]

Круто. Такой точности в размерах, первый раз вижу. Супер. Красавчик мужик

[@kennyh5083]

You have done an awesome job on this trike! (and I've been involved in metal-fab all my life)

[@dr.chandrakantchaudhari8978]

Excellent work. Best wishes for the next innovation.