Making Crazy Lawn Tractor 600cc 100Hp

[@kds5102]

This Guy, if he isn't already, should be teaching the next generation to have these skills! Utterly fantastic build from scratch! He is amongst a dying breed who can build a tube frame vehicle by himself!

[@Mike-rv5bc]

I MEAN HE HAS ALL THE EQUIPMENT TO DO SO🤷.. I bet if u had all the equipment he has u could learn also.. same as me

[@richgwozdz8580]

There’s a guy buy me selling one with a ford cobra jet engine swapped in it

[@TheGriller]

@@Mike-rv5bc😊😊😊😊😊😊😊😊😊😊😊😊

[@ДиславФранткевич-ж2ъ]

Все это делалось не один год, а много времени и мучений, потрачено на чертежи, подбор материала, а не просто, из хлама. Отличная работа... ​@@richgwozdz8580

[@ericward4023]

Obviously this whole project was well thought out and engineered beforehand but the idea came from us backyard mechanics with a small garage and minimal tools and materials who were able to do phenomenal things with so little. Sure your stuff is bad ass with all of your technology, but it never would’ve come to fruition without our initiative and our ideas

[@Rubbernecker]

Outstanding!!! Thank you for NOT making this a 12 part series!! Love the long video format.

[@WorkshopFromScratch]

Thank you :) I'm trying to do everything in one video, but next year I plan to fulfill one of my dreams, which is Bolid F1, and I will definitely have to divide such a project into several parts, I hope you will forgive me :)

[@declanglover4903]

@@WorkshopFromScratch with a project like that yes we will

[@OrionStarfireBlaze]

Absolutely! This guy is an inspiration and would make an excellent teacher for the next generation. His ability to build a tube frame vehicle from scratch is truly remarkable and showcases skills that are becoming rare. It’s amazing to see such craftsmanship and dedication!

[@robbertmadden1386]

I am very jealous of this guy's ability to design build and weld and his shop and tool's. HE can do anything

[@davidwillis5016]

So can you, all you need to do is do

[@danielgriffith7694]

Good build. 50+ years ago, I put a V4 Wisconsin engine on my Wheel Horse 7HP lawn tractor. That was a Beast to drive 😱

[@Gus1966-c9o]

Wow !

[@jlucasound]

It's not 7HP anymore!! 🤣😂😜🤩👍

[@Li0rE]

Awesome build. It is great watching you build up the frame to see the way you problem solve and iterate on ideas. Important to be able to know when to scrap something that can be better, even if it took a lot of work.

[@WorkshopFromScratch]

Thank you 😁

[@philippeflament3410]

Très belle construction, félicitations

[@robertjefferson8275]

Dude is a master level fabricator. This shit is NOT easy.

[@tedbastwock3810]

Agreed. Better to be a Master Builder than a Master Baiter.

[@inmyopinion6836]

Great job repurposing your old 4 wheeler AND lawn mower, Tim Taylor would be proud.

[@WorkshopFromScratch]

Thank you 😁

[@myronalexander3093]

That is a truly impressive build that looks like gobs of fun. I'm super scared just riding a normal quad bike. On that, I'm sure I would be fertilizing the grass all the way. Just a small nit pick, to get the Tim Taylor badge, it must be able to cut grass IE it must be a super powered, super fast, insane working lawn mower with HO HO HIDEY HO!!!! The working tool part is important.

[@inmyopinion6836]

@@myronalexander3093 LOLLOLOLOLOL! ! !

[@D34d1yFoxD3m0n]

That's a Honda CBR 600cc sports bike motor not a 4 wheeler

[@inmyopinion6836]

@@D34d1yFoxD3m0n What did the suspension elements come from ??? Not a lawn mower OR a motorcycle, right?

[@tedbastwock3810]

Best fabrication channel on youtube. And this is your new flagship video. What a masterpiece.

[@WorkshopFromScratch]

Thank you 😁

[@rickarndt3895]

This dude knows how to weld to. Not to mention his shop is top notch hell if I had that shop I'd be building a lot of cool stuff.

[@tuscanland]

Despite my attention deficit disorder, I had my eyes glued to the screen. OK OK, I might have taken my eyes off of it, but only once or twice.

[@Roman-ur4dt]

Maybe you don’t have a problem to keep your attention in one place.

[@kurthartwick5606]

I feel if it is of interest. The mind can focus. But all other subjects are taught but to no end. So learn what can leave the rest!

[@saulzavala8776]

​@@kurthartwick5606that was a very good comment

[@bhijer6457]

real good man! Even if I had all his tools and machineries I would not be able to do a tenth of what has been achieved here, impressive!

[@robertruetting1482]

halfway through and have to go to work... will finish tonight... This man is a professional... great video...

[@tedbastwock3810]

The way you work and your style of editing to show your process are both pure genius. All the many views are well-deserved, and many more. Thanks for continuing to share with us.

[@WorkshopFromScratch]

Thank you 😁

[@jimciancio9005]

Dude! Your work belongs in a museum because your not creating machines, but literal working pieces of art! Bravo and hats off to you and your amazing craftsmanship! ❤❤❤

[@WorkshopFromScratch]

Thank you 😁

[@mead6754]

unreal skills you have mate

[@tonyc.4528]

I'm still using that tractor to mow my lawn. Sold as a Murray 1136....11HP Briggs & Stratton engine and 36" mower deck. I can only imagine how fast I could mow with that rig!!!

[@WorkshopFromScratch]

I suspect that in Europe Murray sold his machines under the name that was on the hood, because the nameplate was the Murray brand :) I already bought this damaged tractor without a mowing unit and engine. As you probably know, there are a lot of ads for used lawn tractors, but I liked this model the most :)

[@jeffackerman7567]

Man, to have the skill to do this is incredible, measuring and building your own parts utilizing those tools, incredible…Inspiring

[@LeeWhalan-bi8kc]

Thanks for taking the time to film this incredible build, it’s so inspiring to see that there’s still people in the world committed to using there time and resources to making something so unique and exciting because they can, rather than just buying it. 😁👍🏼

[@tedbastwock3810]

The exhaust pipes look awesome! Your TIG welding skills have grown very much, looks very professional!

[@WorkshopFromScratch]

Thank you 😁 Although I have very little experience in welding stainless steel, but I try very hard :)

[@nickprice7752]

Not only did you do a hell of a job fabricating this thing but it isn’t just thrown together and welded up. You used taps and bolts which I really like. The tear down ability without cutting shit is next level. And then the attention to detail with the shifter, pedals, the stretched hood and the nerf bars. Wow, this thing is crazy man. Im pretty jealous 😅

[@WorkshopFromScratch]

Thank you 😁

[@eddietowers5595]

WOW, That’s a beautiful lawn tractor, I’d have to do the neighborhood lawn after having fun doing mine in record time.

[@jamesbrooks9828]

Awesome job designing and assembling this piece of art.

[@WorkshopFromScratch]

Thank you 😁

[@ronniemullis8717]

Sir, your engineering and machine shop skills are off the chart. My wife said she had chores for me to do, but I told her they would have to wait.

[@RayNWall]

You’re a farmer, engineer, fabricator, welder, machinists and mad genius. Definitely had to subscribe after watching this creation. Good job.👍👍👍

[@danhard8440]

he build that engine cradle as if he is putting a Steve Morris big block in that thing🤣

[@johnnyshell2839]

Not the smx. Maybe SML

[@I_Am_Your_Problem]

Who?

[@tgi3197]

I was thinking the same thing. Lol.

[@chrisnash2154]

I would venture to say this is more of a custom pro competition quad now. Outstanding project and I couldn’t see any better way than this to ride around out in the country.

[@Kakuro-hl1kk]

This is a beautiful piece of work, your workshop is perfectly set up, it's a real pleasure to work in. Many greetings from Germany.

[@WorkshopFromScratch]

Thank you 😁

[@landongere7091]

Man, this was fun to watch!! It brings me back to my younger days of building dirt track super stock race cars. Then tearing them down, and rebuilding em after the driver put em into a wall! Thank you for helping me relive the good memories of great days gone by! Oh yeah, before I forgot. Judging by the amount of HP and speed coming from that thing, you just might consider adding a rollbar/ cage and safety harness. I'm sure your audience would like to see you stick around for quite a while to come. Something to think about!🙂

[@reuben9213]

Really enjoyed watching you create from scratch . This is an awesome with knowledge of all the equipment you have . Being a machinist welder and such makes all the difference . Thanks for your sharing from Poland . Such an artist my friend ! I'm from the USA .

[@niezyziombel4687]

Do tego projektu to powinieneś założyć pasek na rękę że jak spadniesz żeby to odlaczalo prąd, szatan mega i w dodatku świetnie wygląda, szanuje za dbałość o detale. Kozacki sprzecior i majster pierwsza klasa!

[@rafalpietraszek4070]

obejrzałem od deski do deski. masa pracy . podziwiam Cię

[@WorkshopFromScratch]

Dziękuję 😁 Plan był prosty ale wszystko się skomplikowało po zmianie położenia silnika 😂

[@rafalpietraszek4070]

@@WorkshopFromScratch chyba nie tylko zmiana położenia silnika , bo i cały zawias z przodu został zmieniony. Mieszkasz w Polsce?

[@WorkshopFromScratch]

Na "Temu" udało mi się kupić fajną przekładnie kierowniczą, za te pieniądze szkoda by było jej nie użyć a to wymagało poszeżenia mocowań wahaczy:) Tak, jestem Polakiem:)

[@tedbastwock3810]

Always love seeing you actually use the tools you made in previous videos.

[@paddylandreville8501]

Now, that's a sign that this planet has intelligent life. Thanks for posting.

[@WorkshopFromScratch]

Thank you 😁

[@joesilvasr9733]

Certainly one of the coolest builds on KZbin. Crazy talented 👍👍👍

[@Green69Fish]

Incredible build!!!! You Sir are very very talented!!! What a fun toy!!!

[@WorkshopFromScratch]

Thank you 😁

[@SmokeFlame1]

What a fabulous build. It has exceptional design and engineering and goes like hell. Makes me wish I was 18 again. (I'm 88.)

[@SilvioSchwartz]

Es war so entspannend, beim Bau diesem genialen Trekker zuzuschauen. Es ist ein super Teil geworden. Ich wäre glücklich, auch solche Fähigkeiten und die Möglichkeiten dafür zu haben. Danke für das tolle Video.

[@WorkshopFromScratch]

Danke 😀

[@ayamiblade9848]

You Sir are a LEGEND! It's so nice to see someone do the thing I've wanted to do ever since I was 12. I really hope we can see more videos of this thing driving and stuff!!

[@WorkshopFromScratch]

Thank you 😁

[@michaelokeeffe490]

I can sense a cnc plasma table build coming soon 😊

[@WorkshopFromScratch]

I plan to make such a table, but I need time to collect more parts and knowledge to make such a CNC table :)

[@stuartmarkman769]

Judging by your skills and your equipment , this is not your first rodeo. Excellant work.

[@mooremaceo]

Seen some guys do this before, but this is by far the coolest!!!

[@jdblagburn7696]

My favorite build yet ... and props to camera operator and done pilot as well !! 🤜👍

[@Stefano-86]

Finally, the tractor we didn't know we needed so hard! I would suggest you splitting the video into sections with a short sentence describing what you will be doing in each phase; that would help a lot understanding your work. Also, please keep the information provided in the subs for few seconds more! Congratulations on this and all your incredible builds, please keep them coming!!

[@WorkshopFromScratch]

Thank you 😁 I am making the changes you wrote about, thank you for noticing it and writing to me about it

[@Stefano-86]

@@WorkshopFromScratch thank you for your work!

[@toothfairy788494]

I loved watching this video, the workmanship is top notch. Love to get a run on it.

[@MasonSowell-cm5nr]

That frame I believe would stand up to a small block LS! With all the bracing I thought i was smelling clutches burning from the little 600! Helluva shop and at towards the end of the video I noticed the small A frame house im guessing he’s single or I would be providing I had a shop that held that amount of weapons/tools guess im just jealous.. definitely envious! Good job!

[@jamesrankin9833]

Absolutely amazing!! That is built for the test of time!! You definitely have the perfect roads for it! Love the very end, priceless! Glad you showed that!👌🏻 Good stuff!!

[@WorkshopFromScratch]

Thank you 😁

[@DennisMurphey]

That was simply one of the most awesome builds ever. My God you have all the cool tools and know how to use them, the crafty mind to see a design and solution to build it. You have completed what most of us only dreamed about doing. Thank You for sharing your project and result. What a Beast. Just a crazy ride for sure. Dennis

[@jamesvomsaal8194]

Glad to see someone using their tools

[@ieanmillward184]

Really enjoy watching these. Thanks M Sport. Can’t get enough. Pity the other Manufacturers would do these as well

[@moisesbueno8526]

Parabéns Caio , vc se saiu muito bem dirigindo a camionete, mas nunca esqueça desses momentosb com o Carlos viu , e pra vc Carlos, parabéns pelo carinho e paciência com o Caio, abraço.

[@WorkshopFromScratch]

Obrigado 😁

[@DanKoning777]

When you don't upload for a while I *know* that we're in for something *good* in the days ahead. Boy was I right. *GREAT* job from start to finish. Enjoyed every minute-especially the ending!

[@WorkshopFromScratch]

Thank you 😁

[@johnleonhardt992]

So much talent. Such an amazing craftsman. Thanks for sharing this insange build.

[@justicefall1917]

This is absolutely amazing! Your skills are over the top and this is another awesome build! Sure wish you were my neighbor, we would terrorize the neighborhood! Thank you for sharing another mind blowing video!!!!!

[@WorkshopFromScratch]

Thank you 😁

[@randomizer1355]

that is incredibly cool!!! i built myself a motorized go kart from my old pedal go kart and mounted a 49cc pocket pike motor behind the seat! it is incredibly fun!! sadly this is illegal to druve on public roads. once the cops almost got called but my parents stood up for me! the people who wanted to report me were also filming me. they are not allowed to do that. just casual old people from switzerland😑😒. i want to ride my go kart on the main road in my village but i haven’t been brave enough to do this (yet)😎😝

[@artursimoes403]

Brother this is what we can say, very highly qualified video ,thanks for sharing your work.

[@StefenBishop-k9j]

When bro makes a Lamborghini tractor 😂😂

[@andlinux]

It's a pleasure to watch his videos and this was a great build, with a lot of work. Wel done. Greetings from Belgium.

[@WorkshopFromScratch]

Thank you 😁

[@CustodiopatricioTrujillomarcha]

😂 valio la espera maestro 😌 me encanta este canal usted debería estar en la NASA saludos desde Chile 🇨🇱🏜️

[@WorkshopFromScratch]

Gracias 😁

[@gordselectronicshobby3853]

This guy is a real pro.

[@highimpact000]

You forgot the cutting blade to officially make it a 'Crazy Lawn Tractor 600cc w/100hp'. Now that would be useful and also make your neighbors mighty jealous! Coolest lawn mower in the South! Great work, on the project and video!! I wish I had those skills!

[@frankmigliori6159]

It is the coolest thing I’ve ever seen. I love it. Good job.

[@Nobe_Oddy]

SUCH A BEAUTIFUL BUILD!!!! WOW!!!! When you had the video from the driver's point of view, when you shifted gears you could see the front wheel pulling closer together fr4om the suspension lifting up up so much!!! I think if you tried hard enough you might even be able to POP A WHEELIE!!!!! HAHAHAAA!!! SUCH POWER!!! When building the frame I noticed that you were almost doubling everything, making it all super strong, and I wondered why you would add so much weight, unless you were jumping it through the air..... LOL .... But then seeing the torque it has, EVEN WHILE MOVING, I think you might actually need a TRIPLE STRONG FRAME!!!! HAHA!!! I didn't realize it was a 4 cylinder until you put on the exhaust... I thought it was just a two cylinder until then.... what a BEAST!! GREAT JOB!!! I am SERIOUSLY IMPRESSED!!!

[@WorkshopFromScratch]

Thank you :) All frame extensions were caused by constant changes in plans, as for the front of the frame, the first idea was to install a steering rack from a quad, but the plan changed when I managed to buy a steering gear on Amazon and decided to install it, so I had to change the spacing of the wishbone mounts :)

[@scable-eq7bp]

Very cool video, this guy must have a background in building race cars, really good fabrication skills......

[@robertjefferson8275]

Amazing build. Completely amazing. The ONLY thing i would do, personally, is invest in a better seat. A high-back seat with some lumbar support and side bolstering.

[@WorkshopFromScratch]

Thank you 😁 There will be another video with a few improvements and I will probably change the seat, but the appearance will definitely get worse, because it looks the best with this seat :)

[@thomasteeter-cs3sl]

How much does that monster weigh

[@po-po7554]

これだけ機械設備を揃えたうえ制作者の天才的発想と実行力。お見事です。

[@creligarech]

Que projeto sensacional... A construção do chassi ficou incrível... E o carrinho em si ]e um show a parte... Tá de parabéns!!

[@RiccBallard]

I respect the engineering and fabrication of this guy, my skills would not be good enough to do this, in a pinch, I might be able to turn a quad bike into a lawn mower but not this way around lol. The PTO would be a challenge!

[@vinceianni4026]

Good job mister beautifully done you done a lot of work well done

[@WorkshopFromScratch]

Thank you 😁

[@harkbelial]

Those were some insane angles on those tubes💪💪💪💪

[@critical]

This video made me question if I made enough support brackets 😅😂 I can't stop watching

[@fredtheveteran4623]

Wow this guy has some serious skills✌️

[@leonardocasabuono]

Una locura de bonita esa maquina. Desde Argentina Lo felicito amigo !

Amazing build. A man with many skills and talent to put this machine together.

[@WorkshopFromScratch]

Thank you 😁

[@scottdostie3239]

You’re obviously a mad genius. I love it. Hellz yeah.

[@WorkshopFromScratch]

Thanks 😁

[@metaloplastyk]

Panie, mistrzostwo! ładnie zawieszenie pracuje, silnik słusznej mocy, tłuściutka rama, pewnie i 200KM utrzymała by w ryzach. W formie wygląda świetnie, zgrabnie proporcje zachowane. Moim zdaniem przydałaby się klatka ochronna lub chociaż pałąk nad głową i geometria zawieszenia. Bardzo mi się podoba traktorek, szacunek na najwyższym poziomie!!!!!!!!!!!!!!!!!!!!!!!

[@WorkshopFromScratch]

Dziękuje 😁

[@MadeinPolandChannel]

Great project man!! 😁

[@WorkshopFromScratch]

Thank you 😁

[@arturlend2297]

Fajna zabawka, a i wykonanie super.

[@WorkshopFromScratch]

Dziękuje 😁

[@mudbunny6388]

Nice build. You might have gone overkill on the frame, but it is a tractor. 100hp seems to be plenty to spare, but remember, nothing runs like a Deere.

[@sugiuwara4266]

Better having a good frame to not go back working on it later

[@ВладимирК-ч5ц]

Нет слов,😂 шикарный ❤

[@micheluiterwijk3393]

Super gaaf. Schokdempers voor qat strakker afstellen Beter te sturen. En graag een filmpje van een rondje op een grasveld 😅😊😅😊

[@robochronic]

Except it weighs more then a Volkswagen bug ​@@sugiuwara4266

[@micronomeful]

There is no overkill when you’re not an engineer. Better safe than sorry.

[@BrunoPerrin-gy7wm]

Super boulot j’adore 👍vous devais bien vous amuser c’est les roues arrière qui tondent l’herbe maintenant 😂

[@WorkshopFromScratch]

Merci 😁

[@raymondrobertson3869]

FANTASTIC BUILD. TRUE TRADESMAN good luck stay safe Raymond 🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@WorkshopFromScratch]

Thank you 😁

[@scottjones1497]

This is what an engineering degree looks like. Super impressive

[@Wheel_Horse]

Man I wish I had that shop! So many cool fabrication tools! Mad skills brah!

[@Eddie-p5s]

I want one!!! Awesome. Thank you for showing the world some skills and imagination. Yes, To the comment below . I do construction. The Younger generations aren't learning real skills and don't seem to want to.

[@davidwillis5016]

Yes this so true and sad, I hire young people to help with work around my place, trying to teach them skills, but they only hangout for a few days and then their gone, the world is in big trouble if we need to depend on these young people to keep things going -so sad

[@SeanTurnerDeeper6]

Murphy strikes again! Bad ass build!

[@WorkshopFromScratch]

Thank you 😁

[@krystianrugowski2935]

Lubie te projekty, szacun za jakość wykonania. Czekam na kolejne :)

[@WorkshopFromScratch]

Dziękuję 😁

[@rickarndt3895]

Hell I'd like to have that smooth ride by George I think he's got it.

[@Shopsmith10er]

Beautiful build and craftsmanship! Stage 2 needed (aka: compact 3 point hitch, functional rear mower with ally deck and electric motor.)

[@Phillip.G.Lucion81]

I believe the steering took as long as the frame did lol dude this is the sickest racing mower ever great build I learned a lot from this one.

[@WorkshopFromScratch]

Yes, the idea of ​​installing a steering gear instead of a torsion bar required a lot of modifications, and a lot of thinking about where to mount the steering gear so that the suspension works properly, I don't have much experience in building vehicles yet, so it wasn't easy for me :)

[@ohmdur9224]

I have been involved with racing cars and there is a technique that is used for stability in cornering. To do this you measure the outside width of the rear foot print including the tires width then adjust the front foot print including the tires outside foot print to be 2 to 4 inches wider than the rear foot print including the outside foot print of the tires. This, depending on your choice in the greater width of the front foot print creates greater stability when cornering and stabilizes off the corner acceleration for a faster and safer ride.

[@dudeybagz]

This is 77 minutes of my life I will never get back. And I am absolutely fine with that fact. Well done mate.

[@ronwolff5973]

You made this Build look so easy Awesome project

[@WorkshopFromScratch]

Thank you 😁

[@martinjohansson7365]

Colin Chapman and you have different designideas. But i´m impressed by your skills, and the lawnmower won´t fall apart anytime soon.

[@WorkshopFromScratch]

Thank you 😁

[@stevenpiehl6199]

This is a very enjoyable build this guy has mad skills I have three hot rods in my garage but I would really like to run a crazy grass cutter Bring it on coppers

[@WorkshopFromScratch]

Thank you 😁

[@ebteccnc-serviceu.reparatu8464]

Respect....endlich jemand, der auch weiss wie`s geht....cool ;)

[@mikehample698]

What can you not make with all those fancy tools! Im drooling.

[@jonathanallen9205]

That's freaking sic to see someone with the skill and knowledge to do just this. But you have way more tools and equipment available to you then anyone I know. And way more materials then the normal man very nice what you've built and definitely not gonna break

[@WorkshopFromScratch]

Thank you 😁 But if you see the whole history of the channel, most of the tools I use I made myself using a welding machine, a drill and a grinder :)

[@robertraderjr6714]

Excellent! Attention to detail is everything. Now just dont hurt yourself!! I know i would.

[@tjkoker]

Wow, talk about overkill on the frame. Great job, great video coverage. Cheers!

[@WorkshopFromScratch]

Thank you 😁

[@luckylifeonwheels626]

Awesome build looks like a fun little go- cart