World's Most Powerful Mid Size Impact! Reviewing All 40

[@TorqueTestChannel]

Seem Tim's review on this where the tool can often go into some type of heat protection: kzbin.info/www/bejne/aWfUnmmGqpmWmNU A lot of what we consider to be at the top can be found here: www.amazon.com/shop/torquetestchannel Always consider multiple sources and reviews for tools. We often show the power or torque a tool can make, and when they fail for us. But there's always more to any tool than what we can show.

[@MichaelMantion]

I think its time to design an endurance test. Like test it off and on at 50% its rated torque until it dies. Or maybe just let it run with good high cooling. I am sure it would take a while and you would have to bypass the battery

[@TorqueTestChannel]

@@MichaelMantion The problem with endurance tests, and many creators have tried one form or another, is you have to design a test with so many differences to real life (back to back runs, bypassing the battery with a power supply, tool always used hot, grease thinning and weeping out, well made tools will shut themselves down rather than break themselves while cheaply designed tools will keep going which on the surface looks stronger) that by the time you've figured out a way to set it up in order to not just get a bunch of noise but actual results of tools failing... literally everyone disregards the results because it looks so Frankenstein and not representative of how anyone uses the tool. Which I wouldn't blame them. There's no replacement for just good old fashioned using a tool on a job. This is why brands from Milwaukee to DeWalt, Astro to Ingersoll Rand depend on field testers.

[@THE-CB3]

​@@TorqueTestChannelcan't wait to see you retest all the M18 impacts with the new Forge packs as well as the new High torque impact.

[@maddog8004]

I am trying to order the Metabo with your Link but i asks vor a PROMO code ? is there one ?

[@TorqueTestChannel]

@@maddog8004 DANG Looks like SAVEMETABO does $50 off, making this thing $221. That alone would put this into #1 (though we dont factor sales as a rule)

[@laukc7085]

That blue M18 is the kind of tool I'd buy to leave in the truck so I have something decent to use when I need it but I wouldn't feel guilty forgetting about it for months at a time.

[@98ChevyK1500Z71]

Agreed. Would be curious to see how the battery/batteries would last being in hot and cold temperatures for prolonged time, too.

[@OscyJack-]

That's what I use my DeWalt 894 for these days

[@boosted2.4_sky]

Yup...gotta have beater tools...👍

[@wayneswonderarium]

That's what I did with my SiiSii and it still takes off lug nuts torqued to 85 ft/lbs Edit: sits in the back of my suburban in Arkansas heat. So, hanging out at about 150F these days

[@americansmark]

@@98ChevyK1500Z71 never hurts to tint your windows with ceramic tint. Lowered my interior temps by 30* on the summer

[@RockLander818]

I bought the Uauioo and it’s been awesome so far. It doesn’t get used daily but I have used a few times doing rotations and also assemble my beadlocks. That’s 96 bolts but each bolt gets hit at least 4 times with the impact. It’s been solid so far. I realize the warranty won’t be the same if something does go wrong with it. Makita has been kind to me in the past when taking items to their factory repair center. They have repaired drills outside of the warranty period for me. They have great service. I just couldn’t see spending the extra money on their XGT impact since it wouldn’t get used all that much.

[@DUKE_of_RAMBLE]

I wonder if adding a Super-Cap(acitor) or two, to the battery packs, could help with the out-of-the-gate power output?? 🤔 Although, now that I look... they might need to be configured as 1 cap per cell, since finding high-Farad ones in high-Voltage, is a bit of an ask... _(rule of thumb being, twice the rated voltage for the application; 24V battery, a 50V cap)_

[@reallythough3998]

Did you guys know Klein makes impacts, including a right angle impact? They use DeWalt batteries, I'd be really curious if they're just rebranded DeWalt tools or original designs.

[@TorqueTestChannel]

It's female square drive, no real way to test it on our bolt, and even if we came up with something it'd be using an adapter which is sort of against channel rules because tests with adapters suck :P

[@reallythough3998]

@TorqueTestChannel Here i thought i was on to something. So the right angle is a no go (and their rather bizarre 7/16 female impact lol) but they do have a standard set up 1/4" and a 1/2" compact that may be worth a later video for more obscure options out there.. Thanks for the reply guys!

[@justinoff1]

Xwt17 is the sweet spot

[@ToyotatechDK]

Metabo yummiiii

[@KREUZGRAD]

Your channel is like "Project Farm" took 6 sleeping pills

[@donaldslayton2769]

Can you stop already! My wallet can't take much more of this

[@americansmark]

I absolutely adore my DCF891. It smokes huge bolts.

[@TorqueTestChannel]

It's the Rocky Balboa of Mid torques.

[@asphaltspecialties]

Ya I ripped lugs off a dump truck no problem with the 891

[@proscriptus]

I still haven't found anything that the DCF900 can't destroy with basically any battery you stick on it, but it sure earns the Bruiser 2 code name. The market for air impacts must be collapsing. Like, maybe if you have to take every plate off of an excavator track you need one, but you're starting to see a lot of cordless impacts even in heavy equipment work.

[@aaronoconnor606]

​@@asphaltspecialtiesthat's impressive

[@treelineresearch3387]

I bought one last week to get off a brake caliper bolt I couldn't get any leverage with the breaker bar on, it took it off like it was finger tight and made the rest of the job, 2 more new sets of rotors and calipers, infinitely easier. Almost went with the 923 (it was gonna be a DeWalt because I'm in that battery ecosystem), but the 891 was more beans and a little less money. Think I made the right choice despite being target fixated on just getting an impact to remove this fing bolt and not doing any research.

[@TheSir2005]

Didn't expect the Metabo 800 to do this good. Guess we need to see Metabo high torques (1450/1750) now as well on the test bench? ;)

[@j.c.vanniekerk7761]

I want to see this aswel

[@Jeff-rk8hq]

Mhpt their sister company just released to new high torques 1000 and 1500 fr/lb

[@luisrios6642]

A little sore huh, your Milwaukee couldn’t do anything against Dewalt lol

[@GetlostwithKenny]

Definitely impressed with the 891. Even with the tiny 1.7 powerstack it’s amazed me what it can remove

[@SvdSinner]

I'm still getting used to how fast it puts things on and takes things off. The idea that anyone would need more is mind-boggling. My diesel truck lug nuts that took 45 seconds to get off before now take under 3 seconds with the 891.

[@Duane2004]

​@@SvdSinnerikr the only thing that I've ever ran into that it couldn't do was overtourqed semi trailer lug nuts those things were well into the thousand range of tourqe and it didn't quite want to do that but I am impressed at how well it does

[@MrManBuzz]

​@@Duane2004It's been defeated once for me. One of the long bolts that holds the diff onto the PPF on a MX5/Miata. For whatever reason it was incredibly seized in place. Ended up having to make up a 12ft breaker bar to get it out.

[@bossmanz28]

Ive had it defeated a couple times myself but yes the 891 is very impressive. Tryin to take off some super old rusted anchors for dock work. But my dcf900 has yet to be defeated.

[@FordRanchero289]

Exactly the combo I use 99% of the time

[@kellenmatthiae3894]

Would be interesting to see custom lithium pouch batteries for various manufacturers that don’t offer them.

[@dragonmaster391]

It's surprising to not see more aftermarket support for these tools. The custom batteries out there mostly go for budget offerings, but batteries like the beans they made would be wonderful aftermarket pickups

[@tfoen7678]

Agree to that.@@dragonmaster391

[@Wagonman5900]

TTC: "As always, consider other sources out there." Me: "There are other sources?"

[@davidb6576]

Such well presented and consistent content makes TTC the torque of the town.

[@brianshea5014]

Looks like Dewalt just released the DCF961 and can be bought in stores can't wait to see how this compares to "Project Ludicrous"

[@JoshsJettas]

I was going to update my 899 to the 900, glad I waited. Just need to wait for it to be in stock

[@AldenPez]

Im happy with my dcf891. Its my first and only impact wrench. I pair it with a powerstack for light work and it hasnt let me down yet

[@KrautSpaceMagic]

it would be nice to see on the charts a setting where we can see the performance of all items from one brand or just two brands. basically just a filter option

[@davidb3852]

This is my favorite KZbin channel right now

[@ccbowers]

Off brand names that end in the very natural 'ii" shoot to the top of rankings

[@TorqueTestChannel]

This man cracked the code!

[@randyclemarey1974]

Awesome video!! Thank you I appreciate the Amazon brands. I bought an aoben amazon ratchet with 2 batteries and charger (basically a Milwaukee clone) for $89. Have had a year with everyday mechanic use and it works great! Some of these no name brand’s actually work great. Keep up the awesome videos

[@edgarcornette6387]

Love ya guys ... Thanks for all the honest work and honest data.

[@andresmarquez5241]

My buyers remorse was about to kick in if the metabo won 😂😂

[@andresmarquez5241]

Buyers remorse kicked in 8:50

[@HenryTheBoilermaker3rdYear]

I'm happy that metabo is getting some more recognition.

[@Mr.Donahue]

I would bet that when tools get discontinued those Chinese manufacturers use the left over parts to make these.

[@ALEX-xd7ko]

I turn wrenches on the daily. Dewalt mid tq is where its at . I dont even own a high tq anymore ant no need with the dewalt .

[@a_w_bukhari7579]

Good morning torqueheads

[@mattek519]

You were looking for Torque Dorks

[@vibeslide]

Good evening, too 😊

[@a_w_bukhari7579]

@@mattek519 it’s only morning…so

[@GuyFromJupiter]

It looks like Harbor Freight just released a new Earthquake high torque model, and it looks really beefy! I have absolutely no need for one, but I am still really interested to see you guys test it out! EDIT: Sorry, not high torque, its an ultra torque! Gotta love HF names sometimes!

[@boltbreakgarage3842]

It looks like a rebadged "Thor". Maybe TTC should test all of the "Thor" knockoffs.

[@camerone397]

Bought a DCF891 based on your testing, it has been amazing so far

[@Glasseh]

I bought a DCF892 just last week. Used it on my sister's car to swap the wheels. And now it's making some funky noises (:

[@TorqueTestChannel]

They make funky noises from day 1 IMO

[@KHALABEEB]

If its still ripping those lugs off, don't worry its normal🤣

[@JMJR07]

Google translate says that Uaoaii is Hawaiian for 'available'. There's got to be a joke in there somewhere regarding the alphabet soup brand names on Amazon

[@ctrlaltdebug]

They unchecked the CONSONANTS box in the brand name generator.

[@slingin_tires]

Great video, it's nice to see other more guns punching high numbers. I still love both of my 891's. They're my go to for lug nuts, brakes, suspension, exhaust, axle nuts, and more. Right now there on sale for 199 on Acme, which is a great deal!

[@Dagasm]

I recently bought the DCF891 based on your videos and I'm loving it so far. I was looking at the 900 but the 891 should be able to tackle anything my car can give it and in a smaller/lighter form. The precision wrench mode is an awesome peace of mind for lugs on expensive wheels.

[@mikeschmidt4800]

You know tools are getting crazy good when harbor freight has solid tools.

[@michaelmartin2276]

I've seen a new Skil mid torque the claims 800 ft.lbs. Would be interesting to see if it stacks up.

[@angusmccarthy9507]

Would be great to see the 3/4" metabo next, hopefully with the 5.5ah battery for the beans.

[@hanksnowden5288]

Bring the beans!

[@kristoferfc6525]

can't wait for the surger batteries and to see what you guys put out numbers wise for the Milwaukee stuff

[@dougbrook6223]

I love the dewalt mid torque. I have a 5amp hour battery that says mac tools on it i use with it. Not sure if its 18650s or not. Its rare that i need to use my extremely heavy and extremely powerful snapon 9080. If neither will break it loose then its time for a good old-fashioned jack handle and a breaker bar... the snapon once broke a 1 inch extracter screw from a bearing puller set. Almost gave me arthritis in the process. Overall, i think i have a dozen or more cordless impacts and the dewalt is my favorite of the bunch.

[@KHALABEEB]

I also traded my firstborn for a 9080 I rarely ever need 🤣🫡

[@philliumo]

Can't wait until you guys can get your hands on the new Milwaukee pouch cell batteries that were just released

[@pkt1213]

Since I already have plenty of Kobalt tools, batteries and chagers, I always compare to that. The compact 3/8 and 1/2 impacts are current $60 a piece. Not the best performers but I redid 90% of the suspension using them. Axle nut I think was the only thing that needed more power.

[@blamuk]

errr..... that $60 impact "wrench" is 150ftlbs which is basically their impact driver. The mid torque described here is 650ftlbs and $230 kit......

[@pkt1213]

You're right. It is just something I noticed when I went to go see how much Kobalts mid torque was.

[@blamuk]

@@pkt1213 right, the $60 impact is the compact wrench. The mid torque is $200+ as a kit. The compact is basically a slower impact driver with a 3/8 anvil.

[@NagashiChidorii]

@@blamuk I cant find them selling the kobalt impact wrench KIW 124b-03 anywhere on the lowes site

[@tadda6282]

Wonder what the new Milwaukee pouch cell packs will do to the numbers from these tools.

[@ClipSwitchFlashlights]

Totally. I wanna I wanna known if it adds a worthwhile bump to the mid torque.

[@improvedgarage]

manufacturers "lets make two high torque, one of them 10% behind the other and we will call it a mid torque"

[@TorqueTestChannel]

Lol, thier high torque is massive

[@youpi403]

Worked for metabo France some Times ago, help theme move a repair center during the hikoki merging, it was nice, people are very caring about their products and the ''light Duty" BS18 drill they gave me for the lols afterward IS still around 2 years ago, i use it to start my old 4hp landmower and no pb so far. Those guys where very Nice as well. Edit: (i use the drill ''normaly'' most if the time lmao)

[@Elektrotechniker]

I also have n bs 18 ltx bl i as my main drill. They are absolutely built amazing! With needle bearings on each little planetary gear, like no other does it!

[@BL-yj2wp]

I still have a BS 14.4 from 2017, paid about 90€ for the kit and it's still holding up just fine despite me using it at work. Solid tool.

[@wallingj68]

Adding a comment to fluster KZbin algorithms.

[@riba2233]

metabo really needed a refresh in mid torque category, nice to see they did well! And yeah 5.5ah pack is certainly more powerful than 8ah one (30T vs 40T class cells, 40A vs 30A cont, no match). Also kudos for testing all the mid torques, nice achievement ;)

[@jamesward5721]

Any Metabo tool I ever bought kicked me in the nuts when paying for it & then held my hand & helped me along every day at work afterwards. Which is preferable to getting a bouquet of flowers the day you buy & then getting kicked in the nuts every day afterwards - which loads of the rest do habitually.

[@narlycharley]

I have the mid torque Ridgid and it took off my Toyota crank bolt with ease the other day, which is about all you'll need for automotive work.

[@ZomPaul2113]

Ended up grabbing a milwaukee mid 5-6mo back. No regrets i like the size.. if i need more chug ill grab a high torque, forge battery or just my pneumatic but its been a good all entry into hoseless for me.. dewalts be tempting but not a fan of battery bulk or toolbulk going up the line... hopefully i dont buy a bad apple milwaukee as i round out my rig and intend to branch into another lines if needbe for 'hobbying' like pumps, weedeaters, or emergency car kits

[@hifiman4562]

I finally bought me a mid torque. The Ryobi 1/2", using a 6ah battery. Does everything I want.

[@ElPants21]

I love the can of beans picture for the spicy Makita pack

[@cliffordmontana4562]

In my opinion the Milwaukee is awesome because of the size and weight. The dewalt is huge. It’s more comparable to a high torque.

[@BlindMansRevenge2002]

40+ models tested and none of them the Ingersoll, rand W 5153

[@zeuss194]

Time to sell "teh beans" battery pack to make my amazon tools amazing

[@TdK71]

How about testing the new HFT Earthquake XT Ultra Torque Air Impact? Is like to see what it can do against the competition!

[@Bamamike223]

All 40!! This is going to be EPIC!!

[@j.c.vanniekerk7761]

I am loving the metabo on this channel i am a big fan metabo all the way but is ther not a new high torque from metabo aswell.

[@JoeyB7615]

I got a shirt idea.. full send give it the beans

[@marcellinden7305]

Last year my GF found the Makita XWT18 1/2" on Amazon at a reasonable price. To round out my Makita 18v set I got one and a XWT12 for the 3/8" stuff that I come across. She was so impressed with my XWT18 that she bought one for herself. Am very interested to se how it compares to the XWT17 that you have tested.

[@crandonborth]

Man you have a great GF she’s a keeper… mine just buys random useless things like a flaming hot bubble gum and lingerie 😂

[@Seeker-vo2tz]

bruh amazon make fake impacts haha u got scammed

[@adamk8376]

Love your videos but I really wish you had more of Metabo HPT devices tested

[@nkgoodal]

I have the Metabo HPT mid-torque. It was a no brainer on promotion with 4ah multivolt battery for free. Metabo HPT makes good stuff. Really wish they could have gone with the name Hikoki here in the US.

[@SnappyWasHere]

I’d be interested in a breakdown of all the batteries out there. Like all the types and styles by each brand and interchangeably once the new Milwaukee one is out especially. Makita for one seems to have a dozen variants.

[@MD-gk4uh]

THIS! 100 times THIS! 🙏🥹

[@MichaelMantion]

I wouldn't mind some reviews of all the adapters. been seriously considering just using dealt batteries for ally my different brands and just buying adapters. My ryobi, milwakee and kobalt batteries die much more often than my dewalts which I use more anyways.

[@adampetten1009]

M18 mid is top in my mind, it's compact and has plenty of beans, Bosch is good but just not that good of selection for tools so the platform is harder to invest into although the new profactor drill has quite a lot of beans

[@cliffordmontana4562]

I just got a new m18 midtorque for $110. I have them in all my trucks.

[@СергейТим-ч1л]

MAKITA FOREVER 💪✌️✊

[@stepansavelyonok5532]

Thanks for your tests! In my country Makita's XGT tools cost way less than milwaukee or dewalt tools. Sometimes even less than similar lxt models.

[@saiiiiiii1]

I especially bought the Milwaukee because of its size 👌

[@mrbgpati]

For mechanic work, Milwaukee is the direction I went to. They had the best options for cordless power tools. I also waited for the 2nd Gen mid torque because it was smaller and more powerful than the 1st gen

[@boosted2.4_sky]

Metabo HPT (and Metabo).. doesn't get the recognition they've earned...they're good..across the board not disappointing tools...IMO 6:00... Yahweh😂

[@ToolDeals]

LOL. I would've pronounced it You-Al-Og-Eeg-Goog-E-Ahh-Lu

[@sixtyfiveford]

Good stuff

[@lykos30]

Dcf 891n best of the best

[@slivers4007]

One of these days I hope you add a category for WARRANTY! Seriously some of the stuff you test has no warranty and some lifetime. If they are close in the rest of the test warranty may make a big difference. For example if a 4 year old Makita impact needs electronics it gets thrown away verses a Ridgid with a life time warranty that's either fixed or a new one for free!

[@cpzmelbs]

Nah just extra clutter imo. It typically gets mentioned in the videos anyway. Warranty is also something you should look into before purchasing as it’s subject to change and varies depending on your location. A major variable to add regarding warranties is the fact a lot of these tools aren’t even readily available to most of the world, and with no brick and mortar store to assist with any issues

[@mikethetoolman8776]

891 almost makes the 900 unnecessary!

[@tylerfraker9304]

I really want Milwaukee to give me a reason to get a Gen 3 mid torque. My DCF891 is too big in many places, and the M12 stubby is obviously underpowered. The HF Bauer brushless 1/2” compact fills the gap only slightly because it’s not much more power over the m12 lol.

[@TorqueTestChannel]

Bingo. I'd say Flex then, but yeah we cant all have a million batteries

[@tylerfraker9304]

@@TorqueTestChannel I ALMOST grabbed the flex grinder kit on sale for $100 to grab the mid-torque, but you hadn’t tested it yet and I’ve got 8 battery platforms already😂🤷‍♂️

[@KM-os4be]

Very good Thanks

[@ToolDeals]

Let's all be honest... I've been talking about Metabo for a while now!

[@Ddoq-u9h]

hey man can try the new mid range kincrome it claims it has 950nm

[@stormyyoung6344]

When you going to test the ford automotive power tools?

[@ProblemChild-xk7ix]

Best guess, never.

[@thinkbaker]

Have you guys tested Milwaukees new forge batteries yet ? I’m very curious

[@ClipSwitchFlashlights]

Definitely wanna see if forge adds anything to the mid torque.

[@joshuakerstein9573]

Why is the makita xgt just left out of the conversation, Best trigger, longevity, power etc @torquetestchannel How do think the m18 mid torque will perform with the new forge battery

[@TorqueTestChannel]

It's massively expensive and this metabo just beat it. FORGE won't help a mid torque like M18 much

[@Andrew-xd9fg]

I have both, Metabo doesn’t like rain and doesn’t come with a larger hanging hook. Xgt I can use in wet weather and has a large hanging hook. You seem to leave the specs out I mentioned in your videos and ranking chart. Also Metabo batteries don’t like getting wet

[@joshuakerstein9573]

@@TorqueTestChannel Have you tried the new (BL4040F) 4 amp HO battery with any of the XGT stuff? I’d be Curious if it brings the beans on the 3/4 and mid torque

[@rc-daily]

I'd take my kobalts over about anything else. They make plenty of power and you could get smaller batteries for 10 bucks at lowes. Plus being able to take the tools back to lowes 3-5 years later and have them replaced is super nice.

[@NagashiChidorii]

wait how does lowes take old tools and replace them? even if they are still working?

[@rc-daily]

@@NagashiChidorii they'll replace some tools up to 5 years

[@NagashiChidorii]

@@rc-daily even if the tools are working fine?

[@rc-daily]

@NagashiChidorii why would they replace them If they're working fine? It's a warranty service not a free exchange....

[@Pyrlixx]

Any chance to get the european LIDL and ALDI Brand Parkside and Ferrex Impacts onto the TTC? Parkside/LIDL has both a "mid torque" PASSK 20-Li B2 with 400NM for 47€ excluding the battery and a high torque PASSP 20-Li A3 1339NM for 139€ with the Highpower App controlled 8Ah being 77,90€ or a small 4Ah 20V Block being 24,99. Both without the additional cahrger for sub 10€. ALDI also has interesting products, but the Ferrex brand is sadly only promotion items that you cant get seperately in their online shop. They however boast a "flexvolt" 20V/40V System.

[@ChefBoyarDEEZ]

I actually have the Uaoaii brushless 1/2" impact that claims 420ft-tq. It's very compact and works well but 420? More like 200 at best. I wonder if those numbers are with a genuine makita battery. Other than that I haven't had any problems with it. I just ordered a battery adapter for it to try with my craftsman batteries. We'll see. I got the thing on sale for like $70 with battery and accessory.

[@gilmarc]

Loving the channel. Excellent content👌

[@johnmanning8982]

Tried to order your rankings spreadsheet through Etsy and it just wouldn’t work. Thank heavens for PayPal…this is one of my favorite channels. Thanks.

[@sheepdog3828]

Looking for a subcompact to remove caliper bolts from benz to super duty trucks. Not sure what I'm looking for. 1/2 drive subcompact to access lower bolts . I'm in the ridgid line but have no loyalty just need tool that meets the job. Yes retired so budget is a factor to some extent. Thanks.

[@Paul-yv6qf]

Bought dcf 900 but decided to go with the 891 as no longer professional mechanic. The 891 is good size and strength. Worst case, i can break out the 1-inch air gun. These battery tools are convenient. Thanks, torque test!

[@jontedanielsson1279]

Can some explaine what impractical I need from m18 series to change tires of a modern normal car (2019) aluminum rims. I have the kit 502 from Milwaukee so Ingvar the 4ah batterier.

[@homerjwinthorpe7667]

As a mechanic I use the Milwaukee with a 5.0 for 98% of every thing if I need something stronger pneumatic is the way to go love my mid torque.

[@ryanoneill91]

I just sold my Milwaukee Gen 1 And ordered the makita XGT mud torque (as I have that 3/4 mobster) it's nice to see it still hang around the top. And a nice bump over that Milwaukee

[@RollinPutts0]

This channel is amazing! Been a Makita guy for years and was just about to pull the trigger on a Milwaukee m18 Gen2 1/2" Impact until I saw this testing video showing how Makita batteries bump up the no-name brand big time. I have a ton of Makita 5.0ah batteries so the amazon no-name is one I've gotta buy and try. Thanks for the info! Subscribed for sure.

[@ns_racing]

Out of curiosity about how long have the Seesii models been being used daily so far?

[@TorqueTestChannel]

Good question. The WH710 for almost a year, though another model using the same batteries its battery has since stopped charging. The newer CP1B002 "Gen 3" for only about a month and half as it's new.

[@ns_racing]

@@TorqueTestChannel almost a year of daily use on a cheap Amazon impact is very good I'd say

[@superflanker972]

I just bought my very first Dagmara DTW800 cordless impact wrench 800nm a week ago from online..i've tested it on my father's truck lug wheel nuts which is tightened by air gun impact before and unfastened the lug nuts very fast..

[@hans33sw]

I have the DeWalt atomic, the 891 and the 900 and find myself almost not using the 891 because the atomic gives the most feel (mainly m6, m8 & m10 Hardware). The 891 only comes out when shit is rusty AF or I need stuff to never come loose ever again. The 900 is used a lot for Centre lock bolts on the racecars and is an absolute beast with weirdly enough quite a bit of feel to how tight you torque stuff up

[@McTroyd]

I mean, if you're looking for a reason to buy a German-made Metabo, it would be interesting to see how well it holds up to its Chinese-made counterpart. Though, my bet would be there is no measurable difference. No serious tool manufacturer is going to just slap their name on the side of whatever they find. That Uaoaii is a pleasant surprise though.

[@michaellinner7772]

At some point you have to ask yourself "Is this really in need of such a huge amount of torque?" After all it's just a stupid bottle cap!😉

[@tylerfraker9304]

After about 2 years, the P262 I gave my dad is holding up well, but man she sounds LOOSE haha hopefully it’s just broken in and not on the way to broken😂

[@davidtru4529]

Review the new Ingersoll Rand GR25-KL2 IQV 14.4-Volt 1/4-Inch Angle Die Grinder

[@whatfreedom7]

Damn the Milwaukee got smoked. Not surprised since mine isn’t impressive either. It’s just loud as freakin hell.

[@edwinlopezagudelo6278]

Hello my friend, your skidmore is too good I garet kame to test my impact wernch, please can you let me know, what is the part number of your gauge pressure indicator and cilinders specs? Thanks

[@solomonshv]

paid $150 for a dewalt 891 on a july 4th sale. very happy with it. says made in the US, but i'm not to what extent that is true. maybe just the final assembly?

[@JT-lq4yd]

Great testing, as always! Anyone looking for a lightly used DCF899? I am looking to replaced it with a smaller impact wrench. 😅