WORLD'S STRONGEST RC PULLS a BUS! 21,000Lbs WORLD RECORD!

World's Strongest 50+ RC Truck pulls a BUS! Watch the insane torque & power of COLOSSUS!
* Innovation RC Edition BATTERIES by CNHL! *
👇 👇
chinahobbyline...
*Donations! Everything is used to support the channel and bring new projects for your entertainment! Everything is appreciated!
👇
PayPal: [e-mail]
Special thanks! 💯🎉:
. Rc Boca (Hobby shop)
. Ed (Bus driver)
. PPS (Practical Prototype Solutions)
. CNHL (ChinaHobbyLine Batteries)
. Island Hobby Nut (Gears)
. Castle Creations (Electronics)
. Horizon Hobby & Arrma RC
* Innovation RC Edition BATTERIES by CNHL! *
👇 👇
chinahobbyline...
*Donations! Everything is used to support the channel and bring new projects for your entertainment! Everything is appreciated!
👇
PayPal: [e-mail]
(I seriously appreciate any of those who do so, it helps keep content coming along, quicker)
Links to other Innovation Projects!
Shockwave: 👇
• Jet Typhon 200+ KMH/ H...
TwinTurbo:👇
• RC Jet car! "Twin Turb...
Juggernaut:👇
• 100+ Mph 1/5 Kraton 8s...
Hover: 👇
• "Hover" Twin 70,000 Rp...
StormBreaker: 👇
• Arrma Talion Active Wi...
* Follow @InnovationRC on Instagram!
#InnovationRC
#arrmakraton8s
#arrmarc
#horizonhobby
#chinahobbyline
#CastleCreations

[@InnovationRC]

Get the batteries that powered COLOSSUS here! chinahobbyline.com/collections/innovation-rc-series?ref=LM9JnF68TkdSj4

[@Davivd2]

That's nuts. I would have thought that the rear bulkhead or the swing arms would snap.

[@InnovationRC]

If you see the part in fast speed getting the thermometer after pulling the bus, you'll see a spare axle and parts in my trunk! I would have sworn something would have snapped

[@dodgymtbknee]

congrats on what you've achieved! serious sumo kraton 🦾

[@ericramos9361]

This guy is out of control 😂

[@rtz549]

Surprised the driveline could handle the load and the strain.

[@InnovationRC]

Me too, I agree. I would have bet an axle pin would have broke. If you see the part in fast speed getting the thermometer after pulling the bus, you'll see a spare axle and parts in my trunk... lol

[@LehtusBphree2flyFPV]

The future of towtrucks

[@Saudi.UsRaeli]

Yes Amigo, THE EARTH IS SPREAD FLAT, and your E-C Car is impressive 👍👍👍

[@Ryndel]

How does this not have 1M views. Crazy. Liked and commented for the algo 👍. Appreciate the hard work man.

[@InnovationRC]

Aw thanks man. I don't know I'm really upset about it. This took a lot of planning and organizing to even make it happen

[@RattrapRC]

So awesome!!

[@EJCR_Cap]

Great video! It is pretty amazing how you reworked those motors to be able to have enough torque to pull a 21,000 pound bus.

[@Lucas.stalcup]

THATS FKN CRAZY HELL YEAH BROTHER

[@badmofreaker4205]

That was pretty cool Brandon, glad to see you finally did it. Looking forward to seeing more. Come out and make some runs in the morning .

[@InnovationRC]

Thank you! Let me know how it goes tomorrow morning I won't make it

[@SH-ni8sh]

🤔 I need to see this in person.

[@InnovationRC]

I didn't believe it either, and I was there!

[@Hankster360]

Brandon you're freeking nuts dude WTH. Who comes up wit this stuff lol? Awesome vid can't believe it Arrma can use you for advertising.

[@InnovationRC]

Thank you! Yeah it would be cool for them to advertise using my video it'd be nice

[@RCFPVSTL]

That Kraton is extremely strong!

[@bernardbrowne5205]

Wow, that is so cool and amazing 👏🏿 😍 bro. What a power house

[@justonjacoby4455]

Great job

[@nicholasduckett3463]

Bro that's really cool arrma will be number 1 😊

[@TR3-WC]

Now that’s how you do it! That’s an awesome video and pull! 👍🏽

[@InnovationRC]

Thank you so much!

[@addictedtorcs]

Insane! 😮😮

[@heat305rc]

that was more than impressive bro 👊🏼

[@InnovationRC]

Thanks man!

[@zachyurkus]

Can’t have math that’s left lmao

[@InnovationRC]

Glad you caught that lol

[@allpacino.3962]

Wow, super🙂 Pozdrawiam z Polski.

[@HAPPYJACKRC]

That’s mad crazy bro! 👍🏼💯

[@InnovationRC]

Thanks man!

[@ramos.nitrorc]

badass!

[@jasondearden1394]

Cool video. 👍🏻👍🏻

[@InnovationRC]

Very much appreciated! Thank you!

[@bradike4082]

My question is even though the bus was on a level surface, when were the air brakes released on the bus?

[@InnovationRC]

I'm sure they were off. Bus was in neutral too

[@nathanroth6240]

You should totally build a custom build based on some kind of heavy hauler or military truck. Gives the vehicle more weight so it has more traction without you sitting on it.

[@InnovationRC]

I was thinking the same actually!

[@justinquizzrclab5305]

Sick pull brother

[@InnovationRC]

Thank you!

[@xXB.FunkXx]

You are going to be hating it if that cable or hook breaks. You should use nylon tow straps. But it's your spine and my 2 cents. Just looking out for ya.

[@InnovationRC]

Oh yeah that's exactly what I thought. But it's a steel bike cable it'll probably break after Colossus does

[@deltazero3796]

cool one^^

[@CoachD386]

Sheeesh 💪🏾💯

[@InnovationRC]

Thanks Coach!

[@evrenogen7485]

Aynısından bende istiyorum

[@boomjeep99]

Im REAL IFFFY

[@truongxuan1680]

Hello, I know you are a player with a lot of experience with this RC and I have a question for you: can the kraton8exb with a max4 esc and a castle 800kv motor reach speeds of more than 100mph? and of course it can. 39/39

[@InnovationRC]

Yeah I don't see why not if you run 12s

[@chrislang7460]

I feel like the next obvious evolution to this is to parasail behind the rc.

[@InnovationRC]

Haha!

[@Rcprescription]

Lol…. That’s awesome…. Looks like a ton of money under the hood of that guy!!…. But definitely cool!!

[@WewuzKangz85]

Do they make rc dynos?

[@InnovationRC]

They do but nothing serious

[@stevelamonte1962]

thats crazy i could use a little help making a speed run car not sure how fast i want to go just fast enough to stay ahead of my buddy and im in florida myself. great job now throw some screamin little kids and a distracted bus driver on the bus...lol

[@InnovationRC]

Lol I'm sure Colossus would still pull with the kids and driver too

[@toysforboysrc]

BTW… someone commented that a 1HP wench was quicker/stronger than your demonstration in this video and he made a very good point but then also said these“100hp” rc cars are over rated 😂 and I get where he’s coming from. So I wanted to re-post my reply on the front page bcs I want to hear other ppls comments… so I said: … however a wench is built for torque and it’s geared for torque but I get what you’re saying. These rc motors don’t have as much torque as a wench but they do operate at high rpm speeds between 65k rpm - 100k rpm so what ever the hp rating is for that motor, you have to be at high rpm to reach that hp number. In this video, those motors are 800kv and rated 45k rpm and you won’t see 25hp from each motor until they reach top rpm. Ok So this current low gear ratio gives the rc truck 15mph at top speed at 45k rpm.., Pulling the bus was moving about 2mph - 3mph… that’s 1/5 of its top speed. So 45k rpm divided by 5 would be just 9k rpm, and 1/5 of 25hp would be 5HP and at times two motors at best 10hp. So we witnessed an rc truck pulling a bus at 10hp and 9k rpm going at 3mph tops. One thing to remember…. You CAN have TORQUE without hp… which is why the wench is as powerful as it is!l at only 1hp. But.. you cannot have hp without TORQUE.

[@InnovationRC]

Absolutely agree! It only pulled 8hp to move the bus. Electronics show via data logs it can easily tow another bus... Maximum power out is 25hp per motor/ esc (safely), if the motors only pulled 8hp. This bus is a third of what it can really tow..

[@PigglyWigglyDeluxe]

I thought “innovation rc” was about… ya know… innovation

[@Nathan-qt2zi]

The batteries are really good to be fair

[@InnovationRC]

I don't think Miguel likes me haha

[@Nathan-qt2zi]

@InnovationRC ow yea just seen the other Comments 🤣🤣 you're doing good don't worry, love the stinger shame they stopped making them

[@InnovationRC]

@@Nathan-qt2zi yup, is what it is. And thanks I appreciate it I love my car. It is certainly a shame for sure :-/

[@toysforboysrc]

That’s CRAZY!… I’m seeing metal shavings fallen from the ⚙️ gears😮… also you didn’t mention that those are the STOCK drive shafts and axles on the 1/5 Kraton EXB, impressive!…. It would be great to see what the DATA LOGS are??

[@InnovationRC]

Much appreciated! Data log under load read 8hp (per ESC). I'm sure if we pulled with 8s, HP would be lower with voltage compensating higher amps

[@toysforboysrc]

@@InnovationRC ..Thanks for the reply😎 and congrats on your name brand Lipo lineup. I’d like to accomplish something like that some day soon but that all depends on what direction my channel takes. Keep up the good work 💪🫵

[@boomjeep99]

Yea think about supposedly 50hp vs 21000lbs vs what a 1/4" drive shaft lol

[@never-stock-rc2968]

I just bought your 10000 mah cnhl from amazon! Whats the best way to place them on side or on youtube label facing up amd trim the front and back side of trays? Wires wont fit with out trimming

[@InnovationRC]

Awesome glad to hear and hope you like it! Hm that's actually one thing I try to perfect is the battery placement a certain way so I can see that front logo on the label while the wires still going in the right direction I need them to. I'd say do your best to fit them any way or shorten an esc wire length to compensate the battery being flipped around. Shorter wires are always appreciated in an electrical circuit- less resistance!

[@beastrc.7052]

Even though the pulling force is much less than the actual weight of the vehicle so cool how much force does it actually take to move the bus?

[@InnovationRC]

I'll certainly say I couldn't push the bus myself to move it, I tried before pulling it. But 4 large tires on the 8s Kraton had more surface area on the ground than my two shoes, able to get more traction than me with my shoes only on the ground. So unbelievably using my weight on Colossus actually pulls more than I can physically push

[@sofloflow]

What part of FL you from?

[@InnovationRC]

I am all over from west palm to ft Lauderdale

[@sofloflow]

@@InnovationRC im in West Palm myself. If you ever wanna do a meet up id be down. My RCs aint as cool as yours, but i got some neat stuff.

[@muscle949]

Does anyone know whats going on with pps? I still haven't received my order or had a response from them since December 1st.

[@InnovationRC]

I haven't heard from him in a while :-/

[@tharusbradley4651]

Where is vision?

[@InnovationRC]

The road to run him on, or any Speedrun car is being worked on, so there's tar everywhere making me unable to run Vision. Fortunately, he is sitting on my shelf maintained, clean and happy 🤠

[@matejpetras2016]

thanks for the video. I have one question. If the load and speed remains the same on the output shaft will the motor heat the with 5:1 or 10:1 gear? On 10:1 the torque is 50 percent less but I need twice as much motor speed and I dont know the characteristics. the math says that the current will remain the same. thanks

[@InnovationRC]

The motor will heat up less, the higher the heat reduction the less the motor needs to work to turnover the transmission.

[@matejpetras2016]

@@InnovationRC but the higher the gear reduction the less speed you get on the output. but if the output speed must be the same for different gearing it doesnt make the difference unless you are not putting too much torque on the motor.

[@scottrobillard6905]

How is it heavy enough to get any grip on the ground it should just spin out gear reduction

[@InnovationRC]

That's why I had to sit on it

[@whateverrc1804]

What are the two small batteries powering?

[@InnovationRC]

One powers the BEC, which powers the receiver and servo. The other battery is for the light bar

[@cool.stuffs]

I'd like to see it attempt the bus without you sitting on the kraton.

[@rushgush]

well ask the guy to keep the brakes on. then u r actually pulling the weight without the aid of momentum 😎

[@InnovationRC]

Hm, it overcame static friction of 0 mph, it didn't need momentum at first to move it

[@iangilmore3671]

Really! Just do your cars man

[@kevinvalladares1997]

Idk but there’s no way an rc can pull a bus that will take at least 30 of them

[@HERPDEDERP49]

Ngl these tests are kind of weak, put a static load on the ground with no wheels and then pull, much more realistic

[@jalee6587]

50 hp should get that buss moving 30mph. Not .1mph while geared ultra low.

[@InnovationRC]

You want me to pull a bus in neutral with no brakes and me in front at 30 mph? Not a good idea...

[@jalee6587]

A 1hp winch can get that bus moving a lot faster. I hate these over rated 100hp rc car videos

[@toysforboysrc]

… however a wench is built for torque and it’s geared for torque but I get what you’re saying. These rc motors don’t have as much torque as a wench but they do operate at high rpm speeds between 65k rpm - 100k rpm so what ever the hp rating is for that motor, you have to be at high rpm to reach that hp number. In this video, those motors are 800kv and rated 45k rpm and you won’t see 25hp from each motor until they reach top rpm. Ok So this current low gear ratio gives the rc truck 15mph at top speed at 45k rpm.., Pulling the bus was moving about 2mph - 3mph… that’s 1/5 of its top speed. So 45k rpm divided by 5 would be just 9k rpm, and 1/5 of 25hp would be 5HP and at times two motors at best 10hp. So we witnessed an rc truck pulling a bus at 10hp and 9k rpm going at 3mph tops. One thing to remember…. You CAN have TORQUE without hp… which is why the wench is as powerful as it is!l at only 1hp. But.. you cannot have hp without TORQUE.

[@InnovationRC]

Well except the capability for each motor certainly is over 25hp. I only pulled 2hp per motor... That means it can easily pull much heavier than just the bus!

[@cliffordharrison3432]

Promo_SM

[@LehtusBphree2flyFPV]

The future of towtrucks