Castle Speed Motor in Shockwave! (Insane results) with Active Wing!

[@chrism1940]

Nice. I just bought the 7700kv sidewinder 4 motor and ESC for a build I'm doing. I'm putting it in a WLtoys A959

[@angelteamnolimit624]

Jesus my brother you always putting out amazing results

[@carlbModels]

amazing technology and skilled driving. Shame I'd have nowhere to run it on pot-holed UK roads 🤣👍🍺🇬🇧

[@InnovationRC]

Thanks Carl! I appreciate that!

[@brianbunner3669]

😎👍 I was always told to never run anything less than a 100 C battery So I've always been running 5000 MAHH and 130c

[@InnovationRC]

You can use 130C but in reality that battery can only dump 25C legit. All companies exaggerate C ratings. CNHL has legit 40-50C batteries which are some of the best in the world

[@antoniopagandiaz2189]

Nice pass innovation 132mph👍

[@qrisemrc]

I watched the video and was amazed. It's lightning fast. If an RC car had wings, it would take off into the sky. I enjoyed watching the cool video that seemed to open my heart. thank you.👍👍👍

[@InnovationRC]

Glad you liked it!

[@GreatLakesRC]

Impressive! Great info on your set up 👍👍

[@kburg6127]

Hi i owe you a apology about that 1721 motor that you drag race in your typhon and ran a 1.5 keep up the great work and thank you 😊 👍 🙏

[@badmofreaker4205]

Great pass, looks like that's a good motor for speed runs.

[@InnovationRC]

It's a solid motor for sure! I was playing it safe with this setup tho...

[@mikeinvegas1]

Awesome and clean pass as usual. Very consistent.

[@InnovationRC]

Thanks Mike!

[@Gavs_rc_hobbies]

That active wing setup looks way cool.

[@InnovationRC]

Thank you!

[@Cornelius456]

At this point, calling it a Typhon is kind of like saying the Hoonicorn is still a Mustang!! They're so Far removed from what they used to be it's Not funny!! In any case, Love it!! Nice work!

[@wnedcargo681]

Omg that wing is epic!

[@InnovationRC]

Thank you!

[@carlosrubio7455]

Hola me encantan vuestros vídeos.

[@InnovationRC]

Gracias!!

[@wanchanel]

WoW.....wow it amazing friend, Greating 👍

[@InnovationRC]

Thank you!

[@RickyD1968]

Awesome car and video !!!

[@gamechangerrc4633]

Great video that motor has a lot of potential 👊👊💯💯

[@InnovationRC]

Yessir!

[@Plump_Nick]

That thing looks dope

[@tkostang]

What gauge wire is on your lipo? Looks like you may have changed it. If so, I’d love to see a video. More great content!

[@eduardonessim4499]

Hi. Awesome !! Hard work always pays. Congrats ! I bought the TLR typhoon and the upgraded crowns and gears , the fixed 34 T center spool .the same motor and a mamba X esc ,can you please tell me which pinion gear you used for this incredible 6S 130 mph pass ? Many thanks !

[@2040RC]

Amazing work! It is a missile!! Nice video 😀

[@InnovationRC]

Thanks 2040!

[@qqsrx]

How did you tune the chassis running so straight and stable. Amazing results.

[@InnovationRC]

Before limitless or any 1/7 chassis released, you had to setup EVERYTHING correctly. Unlike all 1/7 onroad cars are basically already setup for speed. I always ran Typhon for speed a long time ago so doing onroad stuff is quite easy but extremely time consuming. Have to limit and set shocks, remount everything inside to fit anything you need because space is really limited

[@3689enlighten.RC.]

Good job

[@nicholasduckett3463]

my bro u number 1 n I don't care what anybody thinks u r number 1 n u my bro

[@InnovationRC]

Aw thanks man I greatly appreciate that!

[@coreessj3]

do you have a install video for the active wing or list of parts you used ?

[@nofreerides7033]

Nice and smooth 👍👍👍

[@InnovationRC]

Thank you!

[@GLeAnimal]

Mantap bos ku semangat trus moga sukses selalu ya hadir menyimak bos ku

[@betomagana3030]

Awesome run bro can’t wait to see it on 8! Hey What receiver and transmitter are you running?

[@InnovationRC]

A futaba 4pm and 2006gs receiver!

[@istevemackanixs]

You be on your shit my brother

[@dragongaming400]

Why did you get the wing that move ?

[@clairecooper3848]

Great run …. get 8s in there 👍

[@Spencer19165]

Love the channel and all your videos!! What’s the best advice you would give to someone new to the hobby?

[@InnovationRC]

Don't let KZbin influence your next purpose. Go at your own pace and ask many questions 😉

[@natedawg5150]

Fastest car I’ve seen on even on 4s rediculous fast 😆

[@InnovationRC]

Thank you!

[@choke666]

SIC SIC SIIIIC!!! RITE ON BROTHA! ZOOOOOOOMIN.

[@InnovationRC]

Thanks Badger!

[@choke666]

@@InnovationRC I reely like the adjustable wing in the back. Surprised nobody has either already thought of it- or copied yours!! 🤔 🤣🤑💯 Great ingenuity and design brotha.

[@InnovationRC]

Of course someone already copied it back in 2017. I was the first one to do anything like this for arrma cars, a guy copied for a company. But it's all good!

[@choke666]

@@InnovationRC Figures... lol.

[@Hankster360]

Gearing! Subed!!! 🤣🤣

[@illhairacing3543]

Hey man I love your videos I have a major question so I recently got into 1/7 racing and I was wondering for my felony what would be a great setup for drag racing and messing around I was think A TP killmode a XLX 8s esc for it with foams but I’m not sure what to go with so if you could give me some feedback and what to do would be great thanks.

[@areay40]

That’s crazy, I see the rocket😅

[@paokang1242]

I love this car typhon it so fast 💨

[@HJESR]

Nice run always

[@InnovationRC]

Thanks Roger!

[@stephancobb13]

will that motor fit in the Arma Kraton 1/5 scale truggy?

[@samcourtrc6767]

Amazing bro

[@InnovationRC]

Thanks Sam!

[@earlmoorhead5555]

Awesome passes 💪💯👍

[@InnovationRC]

Thanks man!

[@Hankster360]

Hey Brandon, about the 3rd time on this vid lol. So would you say stay above a 1.17 gear ratio with this motor based on your opinion, and when running with the MMX8s?. What did you run on Spartan when the XLS2 was cutting out if you don't mind me asking? I am currently waiting on an XLX2 for my 2400 but I'm running it on my typhon and limitless with the MMX8s and getting a reading of over 390 amps, wondering if thats concerning as well. Curious as to what you got sense you feel it can be geared up. Thanks and happy again to see you back bro.

[@InnovationRC]

Hey! Much appreciated. It really depends. Monitor temperatures after doing whatever your doing. If you are too hot definitely gear back down to get to a happy medium

[@andrewwhiting5526]

Nice passes 👍

[@InnovationRC]

Thanks Andrew!

[@mohammedatif9560]

Is the arma 6s or tuned version the same in speeds and control?

[@carlosrubio7455]

Por favor dime dónde puedo comprar esas ruedas de espuma no las encuentro

[@InnovationRC]

Rick seffrood on Facebook he hand makes these tires!

[@CoachD386]

Nice pass fam 💪🏾💯

[@InnovationRC]

Thanks Coach!

[@MarcusHicksK.O.C]

Nice Pass

[@InnovationRC]

Thanks man!

[@jspeedrc]

👍🏽 👍🏽 From France 🇫🇷

[@InnovationRC]

Awesome and thank you!

[@jspeedrc]

@@InnovationRC 😉🤜🔥🤛

[@martins2657]

Hello, i have to sub your channel :-) It is shame i did not earlier. I seen 6AWG cables and your connectors are Castle 6.5mm or any other bigger (8mm) bullets? I hesitated between QS8 and AS150 and i chosen AS150 for my bigger trucks. Because of better disconnect only with easy clockwise move. I usually use 10AWG wires (Sledge, XO-1) and plan it also for Limitless V2. I hate soldering and using new Traxxas ID connectors. They disconnecting after jumps, so i chosen AS150 :-)

[@InnovationRC]

Appreciate that! It's 8awg wire from 6.5mm connectors. 6awg won't fit in 6.5mm. I do have 6awg wire on my speedrun Gt cars but they all run 8mm bullets

[@martins2657]

@@InnovationRC Okay. Thanks very much. I will test 6 and 8 AWG with AS150. According to spec, 6 is the max which can fit. But im not using so powerfull motors like you. Its just for parallel combination when one wire which leading from one connector is "divided" by two weaker. For eg. 5cm 6AWG cable from connector, than "crossroad" two 8AWG leads to each separate connectors. Because i can not fit two whole 8 or 10AWG cables directly into AS150.

[@InnovationRC]

@@martins2657 you likely can fit 6awg wire into the as150, except you don't really need 6awg wire when the max amperage those connectors can cross effectively is 200a. Why even need 6awg when 8awg wire easily does what the connectors max amp rating capability is

[@martins2657]

@@InnovationRC You are right. I use 8AWG inside connector and after few centimeters solder two 10AWG wires in this 8AWG for parallel. It will be sufficient :-)

[@jordanritchie2198]

Another nice upload 👊👊. Would u recommend this motor for someone just getting into speed running?

[@InnovationRC]

Thanks man! Actually no I wouldn't recommend this motor. It doesn't come with warranty and it's really hard on the esc. I'd actually get a 1717 1650kv on 8s. Can still get wicked speeds without the chance of mishap!

[@jordanritchie2198]

@@InnovationRC Thanks man yea I kinda figured that. After seeing they send out letters saying they won't cover it. I'll go with 1650 and work my way up. Thanks for your reply 👊👊

[@Iroc_twan]

How much would it cost to build that car

[@technik4434]

Mega!!

[@isaackshirley4695]

What is the esc mount part number im putting that system in my kraton but the sensor wire can not reach

[@InnovationRC]

I have it mounted to a piece of carbon I bolted on top of the diff housing. It's custom work unfortunately

[@isaackshirley4695]

Oh ok gotcha its a good idea ill think of something thank you so much

[@isaackshirley4695]

I always love your videos

[@thongtran9784]

what is your rc chassis?

[@mayhemrcworx621]

What about bearings? That must have ate them up.😄

[@InnovationRC]

Stock bearings surprisingly

[@tobydyes]

You should have used it baby brother 1520 Castle mudar

[@redabh1897]

What tools you are using

[@InnovationRC]

Mip tools always have used them

[@natedawg5150]

What amps is your esc? If you don’t mind me asking?

[@InnovationRC]

The mmx8s esc can clock at 350-400a. Although manufacturer doesn't specify...

[@natedawg5150]

Man that’s a lot I’m still kinda new to the hobby and I seen 150amps esc on like the redact vehicles I didn’t know they made esc that big with that amp that’s cool 😎 I heard of the castle mamba x esc but I couldn’t find the ampage it has.

[@spockfpv]

Quick question, the wing that increases downforce wouldn't this cause the front end to become lighter? By the way the wing is so cool!

[@PetrolHead48]

the wing is pretty close to the rear wheels, so there likely isnt enough "moment" from the wing to counteract the "moment" from the rest of the body and create any lift at the front wheels

[@HTutorials1]

Link to the paint spray, i really want that color man

[@InnovationRC]

It's just gunmetal from Tamiya. First layered with Lame Flake holographic first though

[@HTutorials1]

@@InnovationRC thanks bud! You’ve got the links?

[@never-stock-rc2968]

Question for ya. So I have an xlx2 should I use 8ga wire for my jumper wire? To make series? Or is 12ga ok? Thx

[@InnovationRC]

Noooo don't use 12awg anywhere. Stay with 8awg.

[@never-stock-rc2968]

@@InnovationRC ok awesome!! I remember appreciate that! Happy Thanksgiving!!

[@philthyco1]

Damn! Shockwave on ROIDS!!! Lol

[@InnovationRC]

Ohh he's about to take some! 😉

[@ubpit]

👍👍👍👍

[@InnovationRC]

Thank you!

[@MdSojib-qx3gh]

😯😯👍👍👏👏😲😲

[@francodimaggio7475]

Ne vorrei una uguale cosi veloce

[@MatrixRC]

To fast to furious...👍🏽💯 Good pass brotha. I do want to remind folks that this motor has No Warranty and Can void your warranty on your ESC. Do not try this unless you know what you're doing. Even still one heck of a Run. Stay safe!💯. Good information!

[@InnovationRC]

This is actually an awesome comment! It is all true. Need to be safe out there! Thanks for watching!

[@just4gaming639]

@@InnovationRC quick question I just bough an xlx2 and I'm wondering which motor should I get the 2400kv or the 1100kv I want to be able to do speed like 130 or 140mph max but I also would like to be able to run them a bit like I usually do at my local racetrack since the 2400kv doesn't have warranty do you think I would burn the motor if I was to run it on 6s or 4 s at my track with like a 15t pinion and a 46spur like the gearing of the infraction?

[@InnovationRC]

@@just4gaming639 go with a 1717 1650kv motor then. Can definitely get what you want with that

[@just4gaming639]

@@InnovationRC that is out of stock for now that was my first choice to but I think I'll wait that seems to be the better option like you said appreciate and have a great day

[@robertlopez9323]

First!

[@francodimaggio7475]

Ma poi perche non tradurre in italiano

[@francodimaggio7475]

Ma la vendono cosi veloce booo

[@Rcghost-1]

Amazing bro