Worlds first RUNNING full pp and extend ported ROTARY

[@jingai8882]

You 30 years to late, I build many PP rotarys, and would use a Rochester Quadrajet carburetor, the secondary would go to the PP ports and the primary would feed the extent side ports. On later rotarys, when fuel injection, came along, I would bore into the water jacket, just above the intake ports of the housing and install bosses to take two injections, per a housing, so after the aplex seal pass the intake port then it would inject the fuel, it stop the fuel going out the exhaust port and it had a cooling affect as well. I would also install secondary injectors outside the PP, high up the manifold just under the throttle body. By using both side ports and secondary PP, these engines had useable power from 2200 rpm. With out the side port, power usually came on strong about 6000 rpm. But by all means, try to improve, what we did 30 years ago, you have Google now.

[@gravelfloorgarage720]

Awesome Christmas Eve upload Ash, Cheers for the effort and uploads in 2024, look forward to 2025 season. Pass on the knowledge to the youth of tomorrow. 💯

[@misfirerotary]

Cheers bro 🙏🙏🙏👍👍👍 appreciate the love!!

[@wrighty338]

Great idea with the ports, not new and certainly a lengthy process but that's what you gotta do to keep pushing.

[@misfirerotary]

Hard bro and what u think about the xtreme rotaries tools

[@Provision_nous]

Nice! That Rx7 pp ep is interesting ❤ Merry Christmas 🎄

[@misfirerotary]

Great hearing from u bro yep great idea hey next Christmas to u too👍

[@Fastrxnz]

Big respect for HPR 🎉. Top Blokes especially those hot chips 🍟 from gav still ain’t had any better

[@misfirerotary]

Haha I missed out on those🤣🤣🤣

[@peterhenry9781]

Awesome vid. Merry Xmas.

[@misfirerotary]

Cheers brother u too👊

[@Fastrxnz]

Merry Xmas my brother cu on NYE arvo

[@Sparky210-11]

Top notch content as always Ash!! 👌 Have a great Xmas mate!!! 👍

[@misfirerotary]

Cheers brudda takes a lot of like minded mates to make it happen🙏🙏🙏🙏🙏🙏🙏we all luv rotors and sharing our passion whilst havn fun like the bros pat and gav at hpr said❤️👍

[@ReneMotorSports]

@Misfire NSU back in the day did the primary and secondary intake ports for best performance on the NSU wankel motor for Prototypes way before Mazda took over in the late 60s.Then in the early 2000s Mr Koseki SCOOT was the first person to make a Primary port to P port on a REW 13B. He made 700 hp in those times with a stock upper intake from an FD RX7.

[@rx3165]

Awesome vid Ash 👌

[@misfirerotary]

Cheers bro🙏how good was it that pat and gav showed us around🙏🙏🙏❤️👍

[@ClwnJuNkY]

What happened to that 8 port 12a Ute from ages ago is it running ?

[@misfirerotary]

Hey brotha I remember that not sure if I see it again I’ll try ask the owner👍

[@kingmac007]

Merry Christmas Ash🤙

[@misfirerotary]

Cheers brother to u and the family too❤️👊

[@StevenBrianJnr]

Where abouts did you fellas get those black car covers from they look mint wouldn’t mind one for my 7

[@misfirerotary]

I think there are from super cheap auto

[@StevenBrianJnr]

@ ahh righto brother cheers! Merry Christmas too Ash & thanks for being a proper gc bro🙌

[@BradCollier-zn2uc]

Merry rotang Christmas from Hamilton nz yewll 🤟

[@misfirerotary]

Hey brudda rite back at ya hope to see ya soon🤙

[@Dayz3891]

Awsome not a new concept I remeber talk to an old-timer back in the day user to rally rotary he spoke if this exact set-up reckoned it almost pulls like a turbo full powerband. Good stuff fullus

[@misfirerotary]

Cannot wait till it’s running take it easy laps💯

[@vinniesmith7455]

So basically a streamlined version of a Renesis lower intake is what I’m understanding but made for a PP and ITBs instead of valves that get shitty ….. super cool cures the dip in idle too on revs or on lower rpm’s … sounds like starts up is easier too on the TBs.

[@misfirerotary]

Yep pluses all round cannot wait to see it all up and running there are some tricks going on here🤫🤫that one day I’ll cover👍👍

[@Planb958]

A guy in the states had a yellow fd 20b with extended port PP jack Cecil from HP Logic in Florida dunno if still got it

[@Planb958]

kzbin.info/www/bejne/d2TOqoaVnayJi5osi=VOCTvt5mlooD85Fn

[@misfirerotary]

Sweet🙏👍👍

[@xopgz_gxld01l17]

So will it go super saiyon after 5500k? Would it have two different sounds?

[@misfirerotary]

Hahah🤣🤣❤️👍👍👍yea bro going to huuuuuuum and gavin in my opinion is one of the best tuners on the planet

[@PaulApostolovski]

Ash were is the kingr1 video update brother!!

[@misfirerotary]

Hey brotha👍👍

[@PaulApostolovski]

@misfirerotary don't hey brother me Ash were is that video?? Prove me wrong Ash video footage current and BS photos

[@brucewhittle1255]

I’ve wondered about this type of setup for a while but thought if the PP.s could run off a side draft to keep it all lower possibly completely under the bonnet

[@misfirerotary]

Great idea hey👍👍I wouldn’t be surprised to see it sing to 12000rpm and the power bands going to b👌

[@michaelpaekau3488]

Chur brothers how do we got on the fiber glass 323 front end for sale

[@misfirerotary]

Easy as bro Gavin and pat from hpr New Zealand 👍👍

[@minibikemadman]

man I don't own a rotary car but have been thinking of building a single rotor motor for a gocart. I might have to ask the aussies for some help.

[@misfirerotary]

Hey bro yep that’s possible I know a couple engines like that floating around precision engineering in nz can help u 100 ask for Jeff👍

[@Shaungiles]

🫶🏼🫶🏼

[@misfirerotary]

rotary❤👌

[@davidmitchell4268]

wheres the heat plates and dab rig to go with that hydraulic press Ash??

[@misfirerotary]

Sorry bro we made this vid completely unrehearsed and on the fly maybe nec tine we will go all out👍👍