Check out the links in the description or go straight to the official WPL RC website by clicking below: www.wpl-rc.com/?ref=DAVIDCLARK
@mraltoid192 жыл бұрын
So, an interesting thing happened with my WPL 2-Speed. The 370 motor burned out on it and I replaced the motor with a $10 RedCat 370 motor and WOW it's sooo much faster and more powerful. I've seen people retro-fit the MN86k's 390 motor to the WPL 2-Speed, but just replacing it with a better 370 does the trick from my experience.
@kreezexalted3 жыл бұрын
Dude you're the reason I'm in this game. Just started about 4 weeks ago after I bought that Xiaomi Jimny on sale just at the side off the street (basically just for fun). Saw your video running that to the hill, then saw your WPL C24-1 video. After looking at tons of WPL videos, Now I'm waiting for my C24-1 RTR, a C24 Kit + metal upgrades to be delivered! Your videos after very useful. Keep it up bud!
@RunThatRC3 жыл бұрын
nice glad to hear im not the only one enjoying these little beasts!
@kreezexalted3 жыл бұрын
@@RunThatRC yeah. I totally left my Sneaker channel coz I'm too damn busy building my rigs now. Yep gave up my sneaker collection for this. :-D
@creativeexperience6388 Жыл бұрын
Love your channel. Your channel is one of the channels that inspired me to get my first rc car and that was a rbr/c tube chassis crawler with wpl parts
@RunThatRC Жыл бұрын
nice! Always fun to see a build come to life
@AcroFPVpilot5 жыл бұрын
What a genius solution to such a silly problem. Its a coincidence you posted this video today, because I just put a 2 speed in my C14 and have been experiencing slipping in 1st gear. You can see the issue in my latest video on my channel. I was afraid I would have to tear my truck apart again to break down the gearbox. But I am going to go searching for some foam right now and see if that solves it! Thanks for posting this :)
@RunThatRC5 жыл бұрын
Hope it solves it for ya!
@geneside04 жыл бұрын
Im so glad i have you on KZbin, you have cured my frustration with the gearbox, i have a b-16 and i love it but its my first ever 2 speed gearbox and it was slipping, now im back to trailing, thanks heaps buddy 👍🏻😎
@RunThatRC4 жыл бұрын
Glad it helped!
@jasoncaribou95303 жыл бұрын
I need your expertise 😊, wat is the VCC slot on the receiver for , because when we plug in to this spot with the ecs , my wpl seems to have more power and speed !!? ,Wat does that mean , 🙄 , please help me , thanks David 👍😄
@RunThatRC3 жыл бұрын
I never experienced that. Your running the V3 board with your own esc?
@jasoncaribou95303 жыл бұрын
@@RunThatRC ya I bought a new ecs on Amazon , with a new receiver , for the 3 chanel dumbo remote , but we pluged into the VCC slot the truck has way to much power , mega , so we pluged into the Chanel 3 and it seems to run normal speed , and power , (model T G 3 ) receiver , trying to figure out what the VCC is for , !? . On the receiver , I'm unsure and don't want to do something Rong , I'm hoping that you will know more about this , VCC slot on the receiver , our battery is a 1200 battery that came with my , w p l , Thanks again David , 👍 , you know your stuff ,Jay 😊.
@robk71965 жыл бұрын
Great video man! Your videos have helped me a lot with learning about my WPL trucks
@RunThatRC5 жыл бұрын
Thanks for the support and glad it helped!
@rustytoolman4912 Жыл бұрын
Hey David, thank you for your insight on the 2 speed trans. Another great video!!
@RunThatRC Жыл бұрын
It's one one my favorites to run on my WPLs and MN models. I like the new gearbox that's in the C54-1 RTR and the new B36-3 RTR. Paired with a 370 motor and 1080 HW esc its a performer on trails.
@sanatkumarasharma36274 жыл бұрын
Wow David, your ingenuity hits bullseye again on the slipping gear issue. I adopted the same solution using a piece of polystyrene tucked tight against the servo and it works perfectly well. Simple and easy fix. Thanks! ;) Cheers
@RunThatRC4 жыл бұрын
Nice! glad it helped with your issue.
@jahmenrcbuildingasone42545 жыл бұрын
The more I watch your vids is the more I really want to grab a couple of these WPLs and get to tinkering. Teally glad I found your channel brother✌👍✌👍✌👍👍
@RunThatRC5 жыл бұрын
They are addicting
@Hjerte_Verke3 жыл бұрын
The Green Grease recommended at 8:25 is a good lube for RC since it is plastic and rubber-safe. A lot of lubes aren't and will weaken, soften or otherwise degrade plastic. Grease like that usually comes in big 14 oz tubes like David shows, which is a lot of grease for an RC model... I found out Green Grease also comes in 3 oz tubes (usually in 3-packs) for the mini grease guns so buying the 3-pack, keeping one for yourself and sharing the rest with your friends might be a good option. Then again, these WPL gears need a decent amount of grease because if you use a small amount, it will fly off the gears and stick to the walls of the gearbox. You want the gears 'bathed' in a sea of lube and if you have as many RC cars as David has, you might use up a big 14 oz tube in a year or two... especially if you drive outdoors and utilize submarine mode, hahaa
@RunThatRC3 жыл бұрын
good stuff! I also have the small tubes but my buddies just end up with it lol.
@brsrc7595 жыл бұрын
I tend to be way more interested in the tech videos than the running videos for some reason
@SLEG02 жыл бұрын
I mainly like the videos were they install them
@yunusdesai24292 жыл бұрын
Hello, great video, but is a new transmitter needed for the 2 speed gear box install? I just got the RTR version.
@RunThatRC2 жыл бұрын
unfortunately yes. the WPL res v3 is a good all in one choice or a stand-alone esc and receiver setup with a different 3 channel tx.
@stnickcarver2 жыл бұрын
New to these little RC trucks and liking them alot! As for mods, this is my first one. Do you actually show installation? I'm nervous about taking my stock truck apart and not knowing how to properly install the two speed AND get it to work. There are so many videos out there, but you make it seem easy. I bought the two speed with servo. Then metal axles. Now to tear apart the truck and install it! Also, I bought the WPL transmitter with 3rd channel, so the receiver needs to be installed. I know this is so simple to you, but scary to me! Thanks for your time and videos.
@RunThatRC2 жыл бұрын
I dont think I talk about it in detail but I do have close ups that show how the 2 speed is installed. I may make new videos on them.
@metalwaves41545 жыл бұрын
What's your opinion on the TITANIUM color all metal upgrade axels
@RunThatRC5 жыл бұрын
I'm not sure about the titanium color one. I have the brass looking ones and the black steel ones and they are pretty good mesh wise. Just a fyi most of the upgrade parts are not even made by WPL even if they say it on the listing. But they usually still work ok. Just mentioning it so people hopefully wont blame wpl for the quality of the upgrade parts like some people like to do lol.
@nolanbollenbacher6092 жыл бұрын
I have premium heavy duty grease would that work as green grease or would it be to thick ?
@RunThatRC2 жыл бұрын
if you use that make sure its waterproof grease if you plan to run in water and just don't use as much of it if it is thick.
@nolanbollenbacher6092 жыл бұрын
@@RunThatRC ok thank you
@roberthenry11025 жыл бұрын
Thanks for his vid... I am waiting on mine to come in.. should b here this coming weekend for my Mack truck.. can’t wait..
@RunThatRC5 жыл бұрын
It's a good one in my experience. I have this 4th 2 speed going into something but can't decide and 3 are in service and running strong as of now.
@pedrowoolson42735 жыл бұрын
Nice vid. These transmissions are pretty sweet. I actually blew apart a stock driveshaft (doing something stupid), so the trans is not the weakest link. The arm flex does seem to get worse over time but mine hasn't popped out of gear at all despite the flex being pretty significant right now (my reason for checking out this video). The C24 trucks are pretty awesome if you want to build a cheap crawler that can really climb
@jonathanbarnette87133 жыл бұрын
On my c24 what's the best battery pack for my money something that last and will pick up speed?
@RunThatRC3 жыл бұрын
I go for 1500mah lipo or lion packs. 2s 7.4v is what I mainly run.
@Zerker6663 жыл бұрын
I know much time has passed since posting this video, but would you mind telling how you have connected the gear box servo to the receiver? I have a Dumbo x6 Transmitter and the servo in channel 3 in my C44 only makes a about 60 degrees turn instead of 90. Also thank you for posting all of the wpl videos, sometimes one can be lost without a good guide, since wpl (ans rbr/c ...) do not really care about that thing do much.
@RunThatRC3 жыл бұрын
I haven't used a dumbo Rc setup on my wpls so not sure if your endpoint is adjustable on channel 3. You can try another channel
@edwardlove4300 Жыл бұрын
I just wanted to thank you for your advice.on the windows. I’ve ordered the two speed gear box with the 370 motor for an old wpl B14 I’m redoing.
@rc4life3155 жыл бұрын
I never knew these truck was so upgradable so i bought a b_ 36
@Westen_723 жыл бұрын
I know this video is old but I have a dumbo rc x6 with a ( double sided 20a esc ) and where do I plug the services into
@RunThatRC3 жыл бұрын
usually esc is channel 2 and servo is channel 1
@Westen_723 жыл бұрын
Ok thank you , but where do I plug the gear shifting servo into on the reciver or what channel
@mistermasada18295 жыл бұрын
Which metal driveshafts will work when installing this into an MN 90/99?
@KTMBiker6403 жыл бұрын
Thanks for the tip for the bending servo! i have the same issue and maybe it will help :) but i have another problem running the combo. my motor lagging when i drive - do you have any suggestion? i'm running one of those cheap 30a escs but my friend got exactly the same problem running a way better hobbywing esc :( Thanks!
@RunThatRC3 жыл бұрын
I am not sure about what you are trying to describe.
@mallexplorer4 жыл бұрын
For some reason mine came a little short and didn't shift gears well, so I had to use another servo arm for it to work properly, but now it can shift great!
@RunThatRC4 жыл бұрын
nice way to solve an issue.
@modelnutty65035 жыл бұрын
STILL can't find a source for buying the newer tan colored stock gearbox, the older black ones all day long for about 4 bucks of course, and "Siamese 69" two of them is really good in a 2 axle with a pair of 130 motors. gives good grunt and a decent fast walking pace for a simpler 2ch Tx setup. tan gearbox about 1/2 that speed, better for climbing etc.
@RunThatRC5 жыл бұрын
I have two c14s and two c24s purchased at the same time and all came with tan gearbox but one of the c14s had a 3 gear arrangement with a 10 tooth pinion and the rest so far are 12 tooth and 5 gears. Maybe old stock gears left over when they went to tan gearbox?
@modelnutty65035 жыл бұрын
idk, looks like the 5 gear setup needs a little bit more room inside, the way they put the stops and position of the output shaft.
@dashSlap4 жыл бұрын
The spring on mine isn't strong enough to hold it in gear.. gonna have to stretch it out I guess.. Ever have that issue?
@RunThatRC4 жыл бұрын
had to do that to only one of my 2 speeds.
@dashSlap4 жыл бұрын
@@RunThatRC When reinstalling the servo the plastic on the shifting part happened to slide closer to the spring, which effectively shortened the spring lol... thing is working good now. Lucky accident.
@Cassienope4 жыл бұрын
@@dashSlap Good to know. That's what I am running into now. It feels like it will require a lot of force to keep it in gear. Time to get to stretching or see if I can make the plastic part slip.
@dashSlap4 жыл бұрын
@@Cassienope Yeah when i got it into the perfect spot I threw some glue on it, hoping it'll stay put. So far it has.
@keyrclife5 жыл бұрын
Which one is better 2 speedgearbox?the version in this video or that comes without spring?
@RunThatRC5 жыл бұрын
Not sure if your referring to the all metal vs this or are you reffing to the other plastic gearbox with no spring? This one in the vid with the spring has been pretty good and reliable for me. Haven't run all metal long enough to say and the plastic without spring I tried to get but was never able to get that style gearbox so no experience with that one unfortunately.
@keyrclife5 жыл бұрын
RunThatRC Well Thanks for your answer! Oh yes i forgot, how about the quality of a standard servo that comes from the package? Does it die easily?
@ChadPeterson-zh1lz Жыл бұрын
Just got the 370 motor with 2spd gearbox but the wire connectors dont match the connectors onthe truck,
@RunThatRC Жыл бұрын
what esc are you using?
@ChadPeterson-zh1lz Жыл бұрын
@@RunThatRC I was sold a c 24 that had t be 15years old so has original esc . the steering servo is absoliute junk too has two little arms on top held together by a spring
@rafaelyap13684 жыл бұрын
Metal gears? Or plastic inside
@RunThatRC4 жыл бұрын
plastic but very durable. I run brushless in one and its over a year now without issues.
@megafaunic13 жыл бұрын
Man love your vids, you've helped me a ton with MN and now WPL! I have C34 (I know should've gotten the kit!) And I'm wondering if you have advice for making shocks less bouncy? Or a link to good replacements! Thanks so much!
@RunThatRC3 жыл бұрын
you can try cutting the top tightly wound spring section and that should help but will lower the truck slightly. I run stock springs just spary oil in the shock every now and then and they perform better once you put some running time on them.
@Manly3 жыл бұрын
After playing my rig for about half a year. I started experiencing the shift fork issue. At first I thought it was the plastic gears. Look at it, and it’s not. Then I noticed that my shift fork is loose. It can slide to the left a bit that makes it a bit far from the servo horn and cause the gears skipping. Can I permanently bond it with CA glue?
@RunThatRC3 жыл бұрын
that's one way to try and solve it. I haven't experienced that issue yet with any of my 2 speed gearboxes (my luck maybe) my slipping is usually just a servo horn not engaging fully or slipping under load due to flexibility of servo mount.
@747fa5 жыл бұрын
Yep, another interesting and informative video. And, if you can afford it and like it, buy it. Parts always come in handy too.
@RunThatRC5 жыл бұрын
And when you upgrade you have stock parts to fabricate something with! Win win
@jasonmonroe38695 жыл бұрын
When I hit the 3rd channel transmitter button, the servo moves 90 degrees and returns back to 0 degrees. How do I change that to where it stays in the 90 degree position?
@RunThatRC5 жыл бұрын
What transmitter are you using?
@jasonmonroe38695 жыл бұрын
@@RunThatRC I'm using a cheapo Turbo Racing 91803g-vt 3CH transmitter and receiver. I'm new to the hobby and I'm learning as much as I can.
@RunThatRC5 жыл бұрын
Is there a way to program the 3rd channel to not act like a momentary switch? Is the controller a programmable one?
@jasonmonroe38695 жыл бұрын
@@RunThatRC the controller has digital trim and dual rate adjustments. The instructions leave alot to be desired! I appreciate you taking the time to help Me out. Love your videos and enthusiasm.
@kennygo50533 жыл бұрын
Can i change the normal speed 370 motor to High speed 370 motor with 52000rpm on this 2 speed gear?
@RunThatRC3 жыл бұрын
you can sure try it out. I have a 4500kv brushless bolted to this 2 speed and its been good so far on my mn d90 with WPL parts for upgrades.
@kennygo50533 жыл бұрын
@@RunThatRC but how you found out the pinion fit to your brushless motor? The brushless motor shaft and pinion size must have been different from the original. It would be a hard work to procure and change the pinion gear on the brushless motor.
@RunThatRC3 жыл бұрын
@@kennygo5053 I'm not using the stock pinion. I was lucky that the 10t pinion I had laying around worked for the job.
@bugsy7424 жыл бұрын
Thanks for sharing mate it’s really appreciated 👍😎🤜🏻🤛
@RunThatRC4 жыл бұрын
thanks for stopping by!
@zacmlinaric3 жыл бұрын
Just got my mn99 today, will this gearbox fit it?
@RunThatRC3 жыл бұрын
it does fit it but since it's a 2 speed with another servo you would need a 3 channel transmitter and receiver to be able to switch gears.
@zacmlinaric3 жыл бұрын
@@RunThatRC thanks for the info
@garydemulder67273 жыл бұрын
Hi, I have the wpl 2 speed in my mn99. I also use the wpl metal drive shafts, however on the rear the drive shafts is too short and comes apart (Shaft does not stay in the holder). Which metal drive shafts do you use in your mn's with the wpl 2 speed? Thanks
@RunThatRC3 жыл бұрын
I'm using the wpl ones and am not having and issue with them coming apart. I'm not sure whats going on there. Are the driveshafts the same length?
@garydemulder67273 жыл бұрын
Thanks for your fast response! They are the same length. I think the issue is because I mounted the 2 speed gearbox at least 1 cm higher on the chassis, I maxed out on the length of the driveshafts. Grtz Gary
@benitisoy4 жыл бұрын
i have this sadly SG micro servo wont last do i need to trim the servo endpoint?
@RunThatRC4 жыл бұрын
im still running stock servo. All you have to do is mak sure its straight 90 when in low gear and no engagement when in high and mine have been pretty reliable.
@Just4FunRC5 жыл бұрын
I just got 2 of them i ordered the new set. but i still got the old version. banggood needs some improving on inventory system ID. But what you think is the best version? havent tested mine but old version with spring sounds little better dunno.
@RunThatRC5 жыл бұрын
I am on the same boat. I ordered it also and it showed the new ones in the picture but they sent me the ones with springs. So unfortunately I have no experience with the none spring version. Hopefully I will receive one when I order more. Cross fingers. On the other hand i haven't had much issue with the spring version other than the flexible shift servo mount. There are several ways to solve that minor issue. And no stripped gears to report yet.
@band_siberianhusky7 ай бұрын
Was the gearbox installed without drilling additional holes in the frame? I'm currently replacing a gearbox, and when I install the gearbox into the existing frame hole, it doesn't work well because it's not centered.
@RunThatRC7 ай бұрын
I haven't had an issue fitting the gearbox in the stock location but I usually raise it up higher to get more breakover clearance.
@sukarnoahmad60483 жыл бұрын
I have this 2speed and it makes some unstable noises. When the truck moves at slow speed it sort of jerks. As if the gears are not of proper size or off alignment. At slow speeds its noticeable where the truck moves fast slow fast slow motion. Am i having trouble with the gears binding?
@RunThatRC3 жыл бұрын
usually when that happens to me there is something binding in the driveline somewhere. make sure everything is running free and smooth before you install the 2 speed.
@danielsimental28034 жыл бұрын
Broooooo! Have you see the low profile metal two speed by rbr/c?
@RunThatRC4 жыл бұрын
just seen a pic of it yesterday. Wonder if banggood sells them.
@danielsimental28034 жыл бұрын
Run That RC I hope to see a video about it soon!!!!!
@donaldhenke27503 жыл бұрын
is there a metal housing for the 2speed trans?
@RunThatRC3 жыл бұрын
I think there is a rbrc transmission that is higher clearance and metal housing. Not one from WPL themselves.
@charlesgoehring34454 жыл бұрын
Anybody know what the numbers 370 etc means? Is it wattage or just a model number?
@RunThatRC4 жыл бұрын
130, 180, 370 are motor can sizes.
@earlfuller64743 жыл бұрын
I've had no issues with mine and alot of the time when I'm running a trail I won't even stop or slow down to switch gears
@RunThatRC3 жыл бұрын
sometimes you get one that was built just right.
@jasonsmithsrrcfun92595 жыл бұрын
What size esc do you recamend if I am putting a 370 in my b24
@RunThatRC5 жыл бұрын
The cheap little 30a esc I use in mine are good enough for it. The ones you find everywhere for about 10 bucks.
@jasonsmithsrrcfun92595 жыл бұрын
@@RunThatRC what type of radio and reciver do you use if you dont mind me asking
@RunThatRC5 жыл бұрын
@@jasonsmithsrrcfun9259 I use a flysky gt3c and b. They have hacked firmware. Good radios for the price.
@joshherrman32015 жыл бұрын
So did you just use a jst plug on the motor? I just got my 2 speed and noticed that it does come with wires and the esc I got has a jst plug. Kinda a dumb question just wondering.
@RunThatRC5 жыл бұрын
Yes I used the included jst because the 30a Esc's I used have the jst installed already.
@madacrist40233 жыл бұрын
Hi, can you please advise me on something, i seen that you work with a lot of wpl trucks, mine is still broking the diffs fromt or rear, once I’m forcing it a bit gone, i run 3 types of axels and they don’t survive more then 10 min....thanks
@RunThatRC3 жыл бұрын
you might need to check your ring and pinion mesh while building it. It might be too loose and stripping gears.
@madacrist40233 жыл бұрын
@@RunThatRC hi, thanks for your reply, that it was what I think too but the last one, titanium one I bought it all ready build and same thing....I don’t know....thanks anyway.
@ehmmwl76002 жыл бұрын
to anyone wondering what motor and gearbox to apply to their MN D90.. it’s this one. not the one speed. this motor/gearbox is much faster and has ability to go low speed high torque in first gear. also u will need a “gearbox riser” to apply to D90 without hitting chassis links… i kno this through much trial n error. this product is what you want
@christopherdonnelly62555 жыл бұрын
Thanks for the vid. I'm trying to figure out what I'll need to do to add this to my RTR 24C I just picked up. The controller has no function to work the servo... and no where on the ece to plug in an additional servo. Do I need to get a dif ece and controller to have this? Thank you!
@RunThatRC5 жыл бұрын
Yes unfortunately you are correct. You will need a 3 channel tx/rx to use the 2 speed on the fly. You can however shift it manually with a small screwdriver by moving the servo horn. I do recommend getting better electronics on it as it will increase the performance and make it more controllable and enjoyable.
@christopherdonnelly62555 жыл бұрын
@@RunThatRC Thank you. It's been a few days with this truck and it's a lot of fun. I've ordered a 3ch controller, and a new reciever. I have the C24, will I need different drive shafts with the 2 speed? It's been tough to tell from vids. What would you recommend, the 2 speed trans, or the upgraded motor and metal gear box? Thanks again!
@RunThatRC5 жыл бұрын
@@christopherdonnelly6255 2 speed wins for me. These are the driveshafts I recommend [US$10.80]1/16 Front And Rear Drive Shaft WPL JJRC 4WD RC Military Truck Car RC Parts from Toys Hobbies and Robot on banggood.com banggood.app.link/GvfYBXvgHX
@christopherdonnelly62555 жыл бұрын
@@RunThatRC Thanks for all the info... If you don't mind, one more question, please. Regarding the two speed trans. Is the lower speed all torque, and the higher one for top speed? I'm not too concerned with speed, torque is what I'm after with this. That said, it'll be nice to blast it around quickly between fields though with the high speed. Regardless, this two speed trans will make a huge improvement to performance, right? Thanks!
@RunThatRC5 жыл бұрын
@@christopherdonnelly6255 yes the 2 speed has a lower gearing so the 370 motor has tons of torque. Enough to break plastic parts if you get binded up. The second gear isn't much faster than the stock 180 motor gearbox combo. Enough for walking it around to the next crawl spot.
@christiannarrainen72045 жыл бұрын
Can you make a video of installing the 2 speed gear box on a c24 please?
@andrewgumbs5624 жыл бұрын
I just bought a wpl b-16r and I wanna make it faster. How do I do that and what do I need to get? Do I need a different remote controller?
@RunThatRC4 жыл бұрын
you would need the metal upgrades and hopefully they can handle more speed. These trucks where never meant to go fast. You can see how it goes but not my recommendation if you want speed. You would need so many upgrades and custom parts.
@andrewgumbs5624 жыл бұрын
@RunThatRC is their anyway I can send you my RC and I would be willing to pay for anything you do to it ?
@abhijith75585 жыл бұрын
Please make a video of fixing moter
@RunThatRC5 жыл бұрын
Are you talking about fixing the 370 motor? Not sure what your asking. Maybe you want a install video of the 2 speed? Let me know which one? I'll try and help you out
@akchannel59373 жыл бұрын
can i combine this 2speed gear box with stock wpl c24 board..
@RunThatRC3 жыл бұрын
I don't believe the esc can handle it and you will not have a way to switch gears remotely.
@kristinetarantino34584 жыл бұрын
When you do put more grease in the gearbox do you have to clean the gearbox first or do you just stuff the grease in with the wpl grease??
@RunThatRC4 жыл бұрын
I just stuff marine grease in there with the grease that's already in there. Haven't had an issue yet.
@TransAmDrifter2 жыл бұрын
Is there any difference in WPL 2 speed gearboxes for different cars that fit the 370 motor? I look for a slower gearbox for JJRC Q60 but there's no info about rpm on output shafts. ...or a motor that has less rpm but more torque =)
@RunThatRC2 жыл бұрын
I know some companies make 2 speeds for these but the wpl official 2 speed are all the same. RBRC makes a metal 2 speed I believe and it has a lower low gear and a faster high gear. Very slightly but noticeable. Unfortunately I don't know the actual output rpm.
@TransAmDrifter2 жыл бұрын
@@RunThatRC thanks for info.
@softrc67493 жыл бұрын
We can upgrade that motor?
@RunThatRC3 жыл бұрын
if you please you can swap with similar sized motors. I put a 370 size brushless motor on one.
@BoyJorgey4 жыл бұрын
Good day, will a bigger 540 motor fit on it?
@RunThatRC4 жыл бұрын
370 I think would be the only direct fit. I have seen people tinker and mod these with 540 motors and brushless motors but it's a massive mod and not simply done.
@luna-md1vc5 жыл бұрын
What esc do u use
@RunThatRC5 жыл бұрын
Just using a cheap 30a esc.
@jesseharless245 ай бұрын
Also you can do 2 2 speeds there's a video on KZbin of it
@RunThatRC5 ай бұрын
sounds interesting to have dual gearboxes.
@clydehampas17555 жыл бұрын
RTR how do we solve twitching servos? Thank u
@RunThatRC5 жыл бұрын
It all depends might be the esc, battery or tx you use. Some Esc's you may need a bec for your servo. I have yet to have a twitchy servo. My buddy did but it was a dead battery. One cell went bad and his servo started twitching. Or it could also be a bad or defective servo?
@clydehampas17555 жыл бұрын
But i got 2 twitching servos. One is the steering and the other is the one that controls the 2 speed transmission
@RunThatRC5 жыл бұрын
@@clydehampas1755 what esc are you using and radio gear?
@clydehampas17555 жыл бұрын
The one that comes with au star transmitter. It comes with a receiver and a 20 or 30A something kinda esc. But it works fine except for the twitching 2 servos
@M.TTT.4 жыл бұрын
Did you ever put metal links on a truck with the 2 speed? Annoying that the servo gets in the way, any solution? Seems like if I bend it it wont be long enough anymore
@RunThatRC4 жыл бұрын
My solution would be to mount the gearbox higher up in the frame. It will require some cutting of the interior but not much. I had to do it to my c24 and mn model D90 (did not need interior trimming ) with wpl 2 speed.
@M.TTT.4 жыл бұрын
@@RunThatRC ooo that's a great idea, I'll have to see if ya had a video on that or try to see how I'd do it
@RunThatRC4 жыл бұрын
Here's a vid I did on the C24 with lifted gearbox and body trimned. kzbin.info/www/bejne/Z5zHoKt8d9Omi9E
@jaykerswell12484 жыл бұрын
Hey I have an MN90 and I'm putting a 2 speed in with a brushless motor and I want more flex what do I do
@RunThatRC4 жыл бұрын
I have not upgraded any of my shocks on these. I use them as trail trucks and the flex works ok as is. Other people change the shocks to achieve more flex I believe. Sorry I'm no help with that mod.
@kholidha10453 жыл бұрын
how many rpm, after gearbox...?
@RunThatRC3 жыл бұрын
Sorry I never calculate those numbers. I think it goes 1mph in first or low gear if my memory serves me right.
@raffyturc4 жыл бұрын
been wanting to ask this.. w/c of the two has higher torque/climbing power? the 2 speed one on low gear setting? or the one with single speed geared motor&gearbox?
@RunThatRC4 жыл бұрын
not sure which single speed gearbox your referring to. I do like the 2 speed personally. They work for my needs.
@maxpane6574 жыл бұрын
I dont know of im stupid but i had a servo issue and have changed servos. (Fir the 2 speed) for some reason i cant seem to get the horn to line up and have the low gear with drag brake and high gear with high gear. Its reveresed. Am i dumb lol?
@RunThatRC4 жыл бұрын
not sure what you mean about the horn lining up? you cant get it 90 or its won't ride in the same slot with the new servo? I only have been using original servos so i have no aftermarket servo recommendation. And for the 2 speed you want drag brake in low gear and freewheel on high gear if your referring to the v3 WPL esc receiver.
@maxpane6574 жыл бұрын
@@RunThatRC referring to the v3 electronics. When in high gear drag brale is on, when in low gear it is off. I cant seem to get the servo to engage into low gear without the horn being the wrong way. Ive ordered the newer version of the 2 speed either way. Thanks i know its a bad explaination lol
@tomcook58135 ай бұрын
Interference was mostly an AM issue for AM radio systems..
@Jtyt7354 жыл бұрын
Where does the servo wire go?
@RunThatRC4 жыл бұрын
You have to use your own transmitter and receiver that has another 2 position channel or the WPL V2/V3 tx/rx kit. The RTR wpl does not have the ability to use the 2 speed.
@dontdogarage4 жыл бұрын
Me again🤣 so its dawned on me that my FS remote may have been lost in a move and I've just ordered the 2 speed... I only plan on useing it for low speed crawling so could I essentially tape the arm back to lock it in first gear?? Also what's a good tire for like 15$? Looking for somthing soft
@RunThatRC4 жыл бұрын
The new WPL wheels and tires are nice. For the 2 speed you can just install the shift servo and just have it in first.
@dontdogarage4 жыл бұрын
@@RunThatRC cool thanks for the reply
@raffymagaling25164 жыл бұрын
can you put a 550 motor in it
@RunThatRC4 жыл бұрын
I'm sure there are people that can figure that out with some crazy mods but to use the stock housing without mods 370 is max on the 2 speed gearbox.
@ninos68bug5 жыл бұрын
Hey bud! Looking to get the 2-speed for my c24 also. How did you remove the plastic shaft from the part where it connects to the axles without breaking anything?
@RunThatRC5 жыл бұрын
I just carefully pry it with a small flat head screwdriver.
@sahelth55723 жыл бұрын
can I put this engine on wpl c44km?
@RunThatRC3 жыл бұрын
the C44KM I believe comes with this gearbox and motor from the factory.
@sahelth55723 жыл бұрын
Run That RC yes I belive too , but I want ask for this motor have three speeds or no?
@SuperAlexjennings3 жыл бұрын
Does this work with the stock esc??
@RunThatRC3 жыл бұрын
you would need to upgrade your electronics unfortunately. Specially if you want your shift function to work.
@benitisoy5 жыл бұрын
is it ok to put GS Hobbywing Quicrun 40a ESC to 370 2speed transmission im running it to 2s 18650. it will burn the ESC?
@RunThatRC5 жыл бұрын
The brushed hobbywing 40a esc should be fine on 2s with the 370 2 speed transmission
@benitisoy5 жыл бұрын
RunThatRC how about 60A? is that ok?
@RunThatRC5 жыл бұрын
@@benitisoy should be. I'm running a 60a xl5 esc on one of my b36 trucks
@seanmanness13512 жыл бұрын
Awesome video. Plain talk about an important mod. Backed by real experience. Unbiased. Thanks! Transmission will be ordered as soon asy stupid ass quits typing!
@ijt51315 жыл бұрын
Good yoob can it put in b24zh ???
@ijt51315 жыл бұрын
This video is realy intresting love u!!!
@706bassin85 жыл бұрын
RunThatRC can you give me the link to this product.
@RunThatRC5 жыл бұрын
I purchased mine on aliexpress and Ebay. Type wpl 2 speed and try to find a deal. The sellers I got it from dont have it for sale anymore unfortunately.
@benitisoy5 жыл бұрын
is ok if i use a Hobbywing Quicrun 1040 40a esc to 370 2 speed 2s NiMH?
@RunThatRC5 жыл бұрын
Yes that should work. I have a traxxas slash xl5 60a esc in one of my b36. It just takes patience to figure out where to mount it.
@benitisoy5 жыл бұрын
RunThatRC salamat dude asteeg ka sa RC
@benitisoy5 жыл бұрын
hope it will not burn the ESC 😊
@RunThatRC5 жыл бұрын
@@benitisoy Haha I wish! I just been messing with rc since I was 14 so i picked up some skills lol.
@RunThatRC5 жыл бұрын
@@benitisoy I think you will be fine. These 2 speed 370 motor gearbox can run with a 10a esc but not as smooth as higher amp rated esc.
@АндрейЗаболотников-и7ц5 жыл бұрын
gooooood video
@RCModSquad5 жыл бұрын
Ya done good!! 👍🏻👍🏻😎
@rcericon7104 жыл бұрын
What’s up bro, I just want to let you know that I Gia a two speed gearbox , but after driving my car three times, the servo on the gearbox started shifting from slow to fast speed on its own continuously. I don’t know why that happened. what are you thoughts? Also I notices that this two gearbox comes in two presentations. One with the little spring and one with out it. How can you get the one with out the spring? I don’t trust that one.
@RunThatRC4 жыл бұрын
Maybe check to make sure you are not over working the servo by setting you endpoints or servo horn properly. Never had experience with the none spring gearbox so I dont know if they are worst or better.
@nopalsporttv3523 жыл бұрын
Nice, 👍👍😎
@RunThatRC3 жыл бұрын
Thanks 👍
@leoniade5 жыл бұрын
nice video, i have one too for my MN 90... I upgraded all the electronics and now I'd like to upgrade links, gears and shaft but I find ridiculous the prices of these items. 50-60$ for a full metal kit... they'll pay 5$ to produce them :(
@RunThatRC5 жыл бұрын
I agree with you. The metal parts are too expensive. As far as metal goes I would just get the metal ring and pinion gear that are around 10 bucks for the set and forget about all the other fancy things because it's all It really needs to be reliable. And maybe metal driveshafts for a little more worry free running. My B24zh runs great and it's only upgrade is 30a esc and 180 motor.
@raffymagaling25164 жыл бұрын
i saw another wpl like this but its metal gears
@RunThatRC4 жыл бұрын
yup metal kits are available for these.
@abhijith75585 жыл бұрын
How to fix the moter
@RunThatRC5 жыл бұрын
Not sure what your asking? You need help with the install of the gearbox or actually how to fix the motor if it breaks? Let me know and I'll try and help!
@twain7725 жыл бұрын
That is the same stuff I use for all my vehicles
@softyan4 жыл бұрын
My original 2 Speed Gear broken , i change one Speed motor 380 more Power.
@petersmith64235 жыл бұрын
Good vid, new sub, Cheers......
@RunThatRC5 жыл бұрын
Thanks I appreciate it bro!
@petersmith64235 жыл бұрын
Hey mate, I have the HSP RGT Rock Cruiser, it's a cool truck but too fast for a crawler, can I put a WPL 2 speed box in do you think?
@RunThatRC5 жыл бұрын
@@petersmith6423 not sure if there would be enough space. I don't own a rgt sorry.
@makewithmegma3 жыл бұрын
🔥💕👍
@RunThatRC3 жыл бұрын
thanks for stopping by!
@makewithmegma3 жыл бұрын
@@RunThatRC ❣️👍
@jesseharless245 ай бұрын
1st tip is get rid of that junk motor and put a outrunner brushless in there
@RunThatRC5 ай бұрын
I have one with an inrunner but most mine are running stock motor on the 2 speed. An outrunner would make it a better slow crawler thats for sure.
@jesseharless245 ай бұрын
@RunThatRC huge difference with the outrunner I have a super modded c14 that has the gear reduction transmission with portals and its so smooth but speed is non existent with a 1100kv but I had overheating issues with brushed motor in the setup and batteries lasting like 5 mins now I can run it for 30+ mins without any issues with heat or battery drain