WPL climb challenge!

[@erikvolkmann329]

Man I love your videos. Your channel has helped me a ton on my own build. Thank God people still make decent channels that arent all about "sponsors" and views. you rock

[@RunThatRC]

Thanks for stopping by!

[@AcroFPVpilot]

Best WPL climb comparison video of them all! A lot of fun to watch, good job :)

[@RunThatRC]

Thanks i appreciate it! It was a fun day!

[@TomleyRC]

Nice run dude. The B24 cruised up there like a champ!... 🤘

[@RunThatRC]

Thanks brother! It was surprising. Those are RTR tires on it as well! The rest are on kit tires.

[@TomleyRC]

@@RunThatRC Even more impressive with the RTR tyres!

[@lada_niva_1.7i]

the military trucks named in real life: 1. Ural-4320 2.REO M35 3. GAZ-66

[@Angelo-24.]

it’s m35a2 due to the 6 axel and the body it’s a M35A2

[@AddyRCBuddy]

Awesome video man, love those camera angles. Great job! (Y)

[@RunThatRC]

Thanks i appreciate it. Glad you liked it

[@soloshooter5806]

im waiting on the mailman for my B36....keep the comp videos going,well done.

[@RunThatRC]

The B36 details and 6x6 action are pretty good. You will have some fun with that rig for sure!

I have a B36, notice low power with 180 stock motor pulling 60g more weight for lowering the gravity center. The motor overheats when climbing (it shuts down). Just installed a 370 motor with single speed metal gearbox, stock ESC. Got more torque but out of nowhere it just starts blinking as it is out of battery (not motor nor battery overheating). Any thoughts?

[@RunThatRC]

probably too much draw for the stock esc. I've never ran a 370 on rtr electronics. A electronics upgrade may be needed.

[@one__crewcab2720]

How are you running the stock 180 motor is it cause the esc or is it the motor mine if I climb anything over about 3 foot long at a 30 percent incline it locks up like it’s dead or dying

[@RunThatRC]

If your running the rtr the esc has a load protector that shuts it down to prevent overload and damaging to the esc. The protection is set to high so it tends to cut out on slow long uphills. A different esc will fix that. But if you have a rtr you will need new transmitter, receiver and esc.

[@timspiker9550]

I can't help but laugh when I think of putting the 959b's 570 in one of those 6x6s

[@HoosierDaddy145]

Im in the middle of a wpl truck build right now I have a 4x4 and 6x6 I wonder if I made solid steel wheels on a lathe?it would be impossible to wheelhop at around 1/3 lb per rim

[@RunThatRC]

It may work but also too much weight can strain the drivetrain. So it's a balancing act when it comes to the performance. The center axle upgrade for the 6x6 eliminates the wheel hop issues and lessens the strain on the drivetrain so is a recommended upgrade. The new WPL 6x6 KM kits now come with standard with the updated center axle.

[@HoosierDaddy145]

Yeah I ended up buying the upgraded axles with brass gears and swapped steel gears in them, 2spd transmission and some other aluminum parts here and there.very fun truck but not heavy duty at all. If you want to build a custom hauler do NOT buy a wpl truck.every single piece must be upgraded and replaced or custom made and in the end the whole wpl truck is in a pile of pieces in the birthing of an entire new truck

[@adamdavis5961]

Fantastic! What are you weighting your wheels with? I just ordered lead tape, for golf clubs and tennis rackets. I was hoping to keep all the tire squish I can get, and still have weight. But I have no idea what everybody else is doing! LOL

[@RunThatRC]

I should be able to reveal what I use soon! It's not the best wheel weights but works for me!

[@MKHITARIANVahram]

Супер видео 👍👍👍👍

[@operation11charlieinc]

Awesome

[@AnthonyGonzalez-lw1ek]

Would the tires from the Blue pickup benefit the wpl and do they fit ?

[@RunThatRC]

all the wheels in the WPL line fit all the wpls they are 5mm hexes. kit tires will benefit an rtr.

[@benitisoy]

Do you have a video how to fix Torque Twist in WPL C34 in Servo Mounted

[@RunThatRC]

unfortunately no. The key to getting minimal torque twist with these is to make sure your drivetrain is not binding anywhere.

[@benitisoy]

how i will know if its binding or not

[@roberthenry1102]

How r them 2 speed gearboxes? I’m thinking of getting one

[@RunThatRC]

They work great. I like the 2 speed on all my rigs if I could! But if you don't figure a way to get them mounted higher they do get hung up.

[@roberthenry1102]

Yea that was the other question I was gona ask.. I think I should b ok tho.. I’m turning my q60 into a old style Mack truck.. lol.. gona need it to pull my dozer an excavator around on the lowboy I’m also working on lol

[@donnievillorente5072]

NICE!

[@gsgreenrcs3196]

Nice hill climb

[@RunThatRC]

Thanks brotha!

[@maddogrc7910]

What did you do with the Mn d90

[@RunThatRC]

It did not make this trip unfortunately. I'm the only one with that scale rig and its waiting for its playmate the mn45! Hope mine ships soon!

[@TerryWhite-q6q]

That slow motion crash of my truck was hilarious!

[@AnthonyGonzalez-lw1ek]

Or what tires do you recommend for the wpl’s

[@RunThatRC]

I just use thr stock rtr tires. Some people buy rc4wd tires and other tires to mod on but I have only used the stock tires and cut some lugs of one set for more traction. They work good enough for my needs.

[@AnthonyGonzalez-lw1ek]

@@RunThatRC on the other buy such as rc4wd tires on what size would be recommended 1.55’s or ?? And thank you 🙏🏼 for your response

[@tutorialjoe5595]

Is the b36 good stock or capable

[@RunThatRC]

If you get the KM kit version it's pretty capable.

[@benitisoy]

Can you do a review of B36 using MN D90 wheels?

[@RunThatRC]

The MN D90 wheels will rub on the rear seats. They are bigger diameter and will rub together during some situations.

[@modelnutty6503]

wait till ya "Siamese 69" two stock gearboxes together for dual 130 power :) perfect for C-14/24 as single speed solution.

[@RunThatRC]

I have that mod in mind for the 4ws rig and the b16. I bet it runs real good. How's the battery life running 2 motors and does the 30a cheapo esc handle it?

[@modelnutty6503]

HobbyDaddy's "just add a motor" works very well too, but a little trickier to get the 2nd motor to be straight and mesh nice. it does have advantage of all 4 wheels mechanically connected, Siamesed running one axle each, no meshing issues and smooth... but does lose some center clearance and more work to join the 2 gearboxes. I'm seeing more torque than a single 180, smoother response to throttle, and LONG run time from 1500mah (2S 18650 pack).

[@RunThatRC]

@@modelnutty6503 nice I didn't even try to see if that would fit in the battery compartment. Where did you purchase your batts?

[@howardalteisen2281]

C is badass💪

[@kendallmiller18]

Heyy how do I wash my rc c

[@RunThatRC]

I usually just use my hands and a hose. Then after its clean I spray some penetrating oil on all the bearings and metal parts.

[@HoosierDaddy145]

Put in dishwasher with battery removed

[@RC_Rooster]

Whats the wheelbase on The b24?

[@financialloser]

STEEEP