Thank you Lou. I just had some fun making this one up. 👍😁
@brentwhite1791 Жыл бұрын
Nice build 👍🏻and good information 😁
@RC3DPrintAdventure Жыл бұрын
thank you for watching & commenting. 👍😁
@specialrcvideos26263 жыл бұрын
More than just an modification, thats another level! Awesome job!! 👍
@RC3DPrintAdventure3 жыл бұрын
Thank you, much appreciated..! 😀
@Fourwheeljive3 жыл бұрын
Awesome job! Looks great! Lots of torque. Big LIKE👍🏻
@RC3DPrintAdventure3 жыл бұрын
Thank you, yes plenty of power!
@skorpionman673 жыл бұрын
Good job!
@RC3DPrintAdventure3 жыл бұрын
Thank you very much. Glad you like it.
@skorpionman673 жыл бұрын
@@RC3DPrintAdventure 👍
@satorrotas3 жыл бұрын
Really good work and great looking D12, excellent test !!
@RC3DPrintAdventure3 жыл бұрын
@sator rotas, thankyou. partly inspired by your build.
@satorrotas3 жыл бұрын
@@RC3DPrintAdventure Thanks 😉👍
@riskest3 жыл бұрын
On the 2nd gear it can dance pretty
@MaxeeOffroadRC3 жыл бұрын
Very nice video, Excellent RC 👍#19 🎄🎄MERRY CHRISTMAS🎄🎄
@RC3DPrintAdventure3 жыл бұрын
Thankyou, glad you liked it.
@manong74133 жыл бұрын
Nice upgrade! friend!
@RC3DPrintAdventure3 жыл бұрын
Thankyou for your comment. Much appreciated.
@06madmartin3 жыл бұрын
Love it maybe some 3d printed wheel spacers help for stability she looks a little top heavy. But she's awesome 👍
@RC3DPrintAdventure3 жыл бұрын
Thanks for the comment. Yes wider would be better. I had thought about 3D printed adaptor to 12mm hex. Then i could use some wider wheels. just haven't seen the right wheels yet.
@capciphoby79442 жыл бұрын
Very nice👌
@RC3DPrintAdventure2 жыл бұрын
Thanks a lot..! 👍
@GyuHobbyRC3 жыл бұрын
Nice vehicle, nice video Awesome Let's get along with friends with the same hobbies.. 잘 지내봐요.. 😀😀😀😀😀
@RC3DPrintAdventure3 жыл бұрын
Thankyou for your comments, look like we have the same hobbies!
@theminiatureconstructionco45563 жыл бұрын
That thing looks mint! 👍
@RC3DPrintAdventure3 жыл бұрын
Thank you very much. It is fun to drive. 🤓
@yajuishere3 жыл бұрын
Your video comes in recommending . Your channel is going to grow bro .. Sorry for my English 😁❤️
@RC3DPrintAdventure3 жыл бұрын
Thank you for your comment. Your English is fine. 😀
@kravenkrawlhobby54383 жыл бұрын
How cool is that man.....awesome
@RC3DPrintAdventure3 жыл бұрын
Thank you, glad you like it. I have a couple more videos on this truck.
@JurassicJordan8083 жыл бұрын
Nice!!
@RC3DPrintAdventure3 жыл бұрын
Thank you, glad you like it!
@pauldoroff69733 жыл бұрын
Cool
@RC3DPrintAdventure3 жыл бұрын
Thank you Paul, glad you like it.
@Tazanthro3 жыл бұрын
Awesome build! Have you by chance posted the mounts anywhere or do you still have the files? I've been wanting to do this to my d12 but haven't been able to come up with a way to get the chassis to work. Those mounts look perfect 👌
@albychannel82882 жыл бұрын
Sasis apa itu om mantap buat offroad
@SWEETDREAM003 жыл бұрын
when its turn to gear 2 its act too cute 😆
@RC3DPrintAdventure3 жыл бұрын
It's good fun in 2nd gear, see the 'rock crawling' video for quick blast outdoors!
@ziglanauthiz5343 жыл бұрын
All the printed parts are available or you custom made them?? Was it easy to mount on the c24 chassis? Great video man
@RC3DPrintAdventure3 жыл бұрын
All printed parts are custom, designed by myself. Link to the roll bar in the description. It was straight forward to mount as they have similar wheelbase.
@ziglanauthiz5343 жыл бұрын
@@RC3DPrintAdventure would you please share them ? Would be awesome to do the same with my d12 :)
@Del350K43 жыл бұрын
Wow! Well done - what a clever combination of WPL and 3D printed parts! You did a very neat job of this; I can´t wait to see how it gets on out in the world. Loving your kitchen cabinets, by the way - is that Light Oak? ps I don´t mean to nag, but have you got round to putting away your patio heater for winter yet?
@RC3DPrintAdventure3 жыл бұрын
Thanks Del. It was a fun project. just some loose ends to finish. I think it will be a bit top heavy on a trail run. Reach Rc's truck is also very wobbly up top. I could stiffen the springs, but I think it adds to the comedy factor! I think the cabinets are some sort've oak finish. But I doubt they are of a very high quality wood. More very-neared. P.s., do you see my patio heater in the photo? No because I edited it out...😃
@eliomassa53043 жыл бұрын
Hello, first of all congratulations for the work ... Beautiful !!! ... I wanted to ask you for information if it is possible: Which chassis of the WPL did you use to do the conversion? Thanks
@RC3DPrintAdventure3 жыл бұрын
Hello Elio, thankyou. Glad you like this project. I used the WPL C24 plastic kit for the chassis. Also a WPL two speed gearbox. Thanks.
@hangyeung55822 жыл бұрын
hello, i would like to ask which 4WD gearbox system do u use?
@bm2lanrc5563 жыл бұрын
👈wow bravo👍👍👍
@RC3DPrintAdventure3 жыл бұрын
Thank you for your comment, much appreciated.
@robertdinglasan91973 жыл бұрын
Awesome build? May I know the actual model/details of the 2 speed gearbox that's fit for D12? Been searching to no avail. Thanks!
@RC3DPrintAdventure3 жыл бұрын
Hello, thank you for your comment. This build uses a WPL C24 chassis, (the Toyota Hilux model). So it uses the standard WPL 2-speed gearbox www.wpl-rc.com/products/dual-speed-gearbox. It probably isn't a direct fit for the WPL D12 model. I'm sure it could be made to fit though.
@GhostRider-vs9ec5 ай бұрын
what type of chassis mount do you have because i know what type of chassis it is but I just can not mount in to the same rc truck as you have done.
@galbypetualang2 жыл бұрын
enak buat di lumpur 4wd
@boy6named6zoen63 жыл бұрын
How is the c.o.g on this model? It seems kinda top heavy.
@RC3DPrintAdventure3 жыл бұрын
It's got a pretty high COG. Check the D12 snow run video for bloopers. But it's no too bad to drive, just for fun. Will do some better crawling video soon.
@boy6named6zoen63 жыл бұрын
@@RC3DPrintAdventure yeah was afraid of that. It's a pretty cool model. Almost a bit hilarious if you think about it. Real kei trucks wouldn't even be able to do real rockcrawling. That's what makes it such a fun thing to see. Think I'll pass this myself for now.
@studiotukangrcscale60183 жыл бұрын
🤩🤩👍
@RC3DPrintAdventure3 жыл бұрын
Thankyou, glad you liked it. 😁
@christopherbuchanan25703 жыл бұрын
Is there a 1/5 scale body for this truck available?
@RC3DPrintAdventure3 жыл бұрын
Hello, I haven't seen a 1/5 version of this truck anywhere myself.
@christopherbuchanan25703 жыл бұрын
@@RC3DPrintAdventure Thx for your reply. Yea I have the actual truck and It would be cool to get a body for the 1/5 scale truck to match....
@ASTARAAquaScapeTangeRangUtara3 жыл бұрын
Please link 3d print mounting rear & middle body bro
@MrRGM103 жыл бұрын
Is the c24 full metal chassis?
@RC3DPrintAdventure3 жыл бұрын
No, just the plastic chassis.
@REEtorallygear1113 жыл бұрын
try crawling it! (atleast try making a portal axle on the thing?)
@aravindrao95723 жыл бұрын
brother ur car is super cool but it is kinda unstable cause of unwide wheel base and high body placement otherwise it is too good
@IWEVLOG3 жыл бұрын
Please 3d print roll cage free ??
@calumflemingsrcs22133 жыл бұрын
Wow that’s awesome this looks so good how much money did you spend on this truck I subbed and would appreciate one back 👍👍🔥🔥
@RC3DPrintAdventure3 жыл бұрын
Glad you like it Calum. Hard to judge exactly how much it cost. It was the body shell from the WPL D12 & the chassis from a C24 kit. I would say about £50-60 pounds all in. What's left over can go to making other projects. Thanks for the subscribe. I have subbed to yours. Good video content. I like the ATV's as well as the RC's.