Poor Man's Carpenter's Bench | 5 Wranglerstar

[@markpowell4701]

I don't comment much but, I look forward to your video's every day; even if, I am not going to use the tools or processes. At 69, I wish I, could have made the decision you made when I was younger. God bless you and your's and wish you all a Merry Christmas.

[@noahmarach5113]

I'm an engineer who designs rototillers. Our products are made in China. I have to go over there a few times a year. So far this year I have spent 8 weeks there. We implement the same idea of accountability for our welding stations. Each welder has their own mark and must mark each piece. So then when welds are missed or of poor quality we can go back and trace who did it. It has lead to outstanding results.

[@ravencraft3074]

I am relatively new to the channel and I am getting a lesson in not only the entire process but also in patients. Yes I clicked on this video today expecting to see another step in the process of the bench itself. But as I sat back as watched the sharpening of the tools I still learned another lesson beyond the sharpening of the tool. Patients, not only does it make you appreciate the final outcome of the final product but it has allowed me to contemplate the tools and the bench itself. All of the skills here are new to me and even though I want that actual bench content this sort of side bar is still worth the watch. I have watched a lot of the videos over the last couple of days and I am learning, but I need to go out and get some hands one as well. Thank you for the video.

[@kangaru1492]

Thanks for taking the time to make such high quality videos. Good to see you appreciate finely made tools and love to see you bring them back alive

[@jeremybarker7923]

Thanks for taking the time to show how to properly sharpen chisels. I am just starting to get more into traditional wood working and had no idea how to do that. Very informative and helpful.

[@littletucktruckin1171]

This serious is awesome. I am young adult and have recently fell in love with woodworking. I have been making picture frames so far and I want to my own work bench. I found your videos so far very educational!! I don't mind you spent so much time on the chisels because I learned a lot. I hope the rest of this series is as good as first five have been!!!!

[@littletucktruckin1171]

Series*

[@MrAwsomeOh]

Hey Cody. At the moment I'm subscribed to 135 channels. And yours is by far my favourite. Its not just videos. So often your videos are like little life lessons. And thats what makes your videos so special. Thanks for that.

[@kennyd6738]

You can really tell when WS is into a project he practically hums you can hear the excitement in his voice great series and I did my bench using Paul's vids but still really enjoying watching you build yours

[@adamcroker_hg]

Going back through this series with a new appreciation. Soaking up so much great content and knowledge. Thank you so much for sharing this journey with us. Definitely not the last time I will be watching this series, as I would venture to say that I will learn something new if I watch it again.

[@reactingto7693]

Honestly - I watch your videos more for the "feel" or "experience" than the content. I love the sounds from the shop ( hearing the forge, the sound of the wet stone or file, etc ) the occasional glimpse of the mountains or the woods. It truly is a unique experience. That fact that I've learned more than I think I did in college is just a bonus. The longer the video the better, you have really mastered a cinematic production combined with fantastic sound quality.

[@waterrocketengeneer]

I absolutely love this series of videos and your whole channel. Being busy in the shop is one of, if not the most joyful ways to spend time. A lot of people don't know how it feels to have and use something you made yourself and the joy when it turns out really well. Machines and cheap manufacturing have taken over. Now, machines are good for making things to a high level of accuracy, like a CNC-mill, or robots that make those handy computers. But there is nothing like a fine tool made by a craftsman (of which I wish I had some).

[@brandonkindschy7362]

Thanks for including this segment. It's always nice to learn new ways to sharpen tools in the shop.

[@bascostbudde7614]

You do deserve that thumbs up. There is so much conveying taking time and being at ease, this is what makes craftmanship to me.

[@chipwright6193]

That TED talk that Cody mentioned was a good one! I love the mirror finish Cody got on his chisels. I'm in tool and die and I always like to get that same shine on the pieces that I make. It only takes a little bit more effort to achieve, but the end result is well worth it. People take notice of your quality of work too.

[@TheDroopYJ]

This reminds me of the old PBS show, Yankee Workshop or something like that. His chisels were always razor sharp and he never struck them with anything. Just amazing how well good tools work.

[@hypotheticalhomestead6139]

Loving this series Cody. Such a wonderful project that will be a family heirloom for years to come.

[@josephingram9831]

I love using old tools like the planer or a spoke shave or a chisel or even just a knife its the feeling of a sharp blade ripping through a piece of wood is just addictive whenever I go to carve I have to give myself a couple hours or else ill get distracted and be late for anything I had planed

[@MinionWinston]

Rewatching this video series for probably the 3rd or 4th time and I just noticed that there is a section that repeats itself (1:25 and 5:10ish marks). Love this series. I have a new 900 sq ft garage workshop and I'll likely be building a new carpenter's bench sometime in the near future. I'd love to see more content like this on your channel again. Hope you're safe and healthy.

[@randyowens264]

Cody, the ammonia in the glass cleaner can affect some people's breathing. I use Simple Green on my sanding block and paper. It is nontoxic and provides the needed soap effect to clean and lubricate during the sanding process. The soap really helps the paper stay clean and provide a sharpening surface during the sharpening process. It helps the tool stay lubricate and cool, no heat build - up. I tried both oil and water without good results. The paper tore quicker and did not sharpen as well. I really appreciate you sharing this build as I will be building a woodworking bench within the next few months. Thanks for sharing!

[@TM-A-d2s]

I like your cheeky method for getting us to click the thumbs up… It totally worked by the way. Greetings from a young British cabinet maker. Keep your videos coming, you're an inspiration. Theo

[@caljim1950]

Thank you Cody. I've a set of chisels that belonged to my Dad. Not really heirlooms, but I've always been afraid of trying to sharpen them. You've given me the confidence to give it a shot. Now get back to work. :-)

[@marrano10]

I think you should add "Chisel Sharpening" next to the name of the video, This is very thorough and maybe somebody that is trying to learn that might find it useful. If you agree with me give this a thumbs up so Cody can see it.

[@nathaneells2281]

Your vids are so awesome man. I love your slower pace and explanation. You remind me of my grandfather.

[@robkillebrew3685]

I'm just getting my traditional wood working tools together and I am starting with Harbor Freight Chisels and Planes. Needless to say the edges need more than a little work and files and plane blades is a little different animal than my knives. Thanks much for including this one in the play list. Thanks too for all that you share. 2 Cor. 9:8

[@omerdvora1441]

Hi Cody thanks for the wonderful series, I have a little tip for you, when your plane blade get dull you can just strop it one more time, You can do it at least 5 times before you need to sharpen again

[@matthewmills543]

You can bake in the Ballistol. Put the bare made in the oven on the lowest setting for a couple minutes (without wood on it of course) and it will absorb into the metal pores deeper and protect longer. Works wonders on moving machine parts as well. The little things you pick up in a machine shop. Keep up the good work, love the videos!!

[@bigalbowski1]

Great video... I have seen strops done with both sides but the rough side seems to be the more preferred/popular side... but whatever gives you the desired result, that is the main thing. Looking forward to the continuing journey toward the finished bench.

[@jerrybates5791]

I use a leather strop daily in my knife business and you can use either side. Usually the rough side I use a green rouge and on the smooth side I use white. It really pops the edge of any cutting edge.

[@1st67mustang390]

Jerry thanks for this confirmation

[@Jarastlad]

Great video, kind of a Wranglestar version of Paul Seller's video on sharpening chisels. Since I adore both, it can only be a nice surprise. Thanks for the video Cody, I can't wait watching the next videos about that bench you're making !

[@krenov72]

For anyone dissatisfied by the content, I would say to remember.... Wranglerstars videos are part " how to"" but mostly " what wranglersrar is up to.. ". Building a bench... Oh I need some chisels... And they need to be sharpened.. I imagine people would want to see how I do that... Now I have sharp chisels.. Back to the bench.. Enjoy the winding road folks.. Scenery is better than the plain interstate.

[@dwight.bennett]

Great comment, it says just about what I was thinking in response to the whiners not enjoying the holistic experience.

[@restfulnewt9595]

Haha, don't think we didn't notice the re-use of footage when you were putting the sandpaper down for the first time;) (1:05 and 4:30)

[@mypintofview]

i love those viideos,sittin all the time down and watch them. my problem is, in a few months, i remember, that Cody sharpen his chisels, but i cant find those videos, cause it is in the video of making a work bench. that the point for me. since i knew wranglerstar and his kind of homesteading (with his family) i see handcrafting completely new. Cheers

[@frankdatank6651]

You may have answered this before in the comments or in another video, but I saw you putting ballistol on the chisels and I wondered if I could do the same for my axe. If you have time please do, and I am overly enjoying this video series! Keep up the good work Cody!

[@gus1911]

Thank you for making yet another video. My son and I watch everything you make.

[@wranglerstar]

gus1911 Thank you Gus,

[@HWoodCreations]

Not much work on the bench in this video but WOW!!! Thank you for sharing the chisel sharpening info. Extremely helpful.

[@OverlandAspirations]

Strops with the smooth side up are just the for the very light final cleanup on an edge.

[@SteveandDawn]

I'm enjoying the journey and am thankful for your efforts and sharring.

[@thecordlesscarpenter7956]

I'm with you Cody, do your thang brudda, one note of caution or preemptive remark... I have a set of the same chisels and within the first 2 months (with lots of Paul Sellers mortise chopping with a wooden mallet, also made by watching Paul) my 1" chisel handle snapped off clean. I temporarily replaced it with the extra handle from the 1/2" chisel mounted in my poor man's router but it broke none the less. I planned on making all new handles regardless because I like a longer, beefier handle. love the videos... starting my bench build tomorrow! I'm excited!!

[@SirRoland867]

Cody, what a great video! This very set of chisels is on my Christmas list this year, and now I have a plan of what to do once they get here. Keep up the great work.

[@Schyler86]

You can use either side of the leather, generally the rough side is used with a coarse compound and smooth side with the fine compound. Great video

[@StuartSafford]

From what I've seen the rough side of the strop is used first and the smooth side at the end to polish.

[@jcknives4162]

I've been stropping for decades... the smooth side is the ideal!! I use Green chrome rough for polishing. Enjoy

[@tomkendrickii]

I've had good success with using an old windex bottle with water and a little bit of dish-washing soap. Seems to work really well. BTW since I don't comment very often, love the videos, don't change anything.

[@222varminter]

Thank you for some really good hints! I sharpened a cheap set of chisels from the big box store and after some TLC even these had a really good, sharp blade and are good to work with. Have to sharpen them more often than the ones made from high end steel, of course, but for occasional use or in my on-the-go set, they do just fine. Besides, I enjoy the process of resharpening quite a lot, so no tears lost there :)

[@sweetheartsmom]

I am getting ready to make a homemade tool coating from mineral oil and local bees wax. love this video. very relaxing; wonderful craftsmanship

[@jameschrisdavis]

Despite some complaints, I for one appreciate you showing every step to a project."Give me six hours to chop down a tree and I will spend the first four sharpening the axe." - Abe Lincoln

[@mjdev-i1p]

This is not only interesting .. it is also relaxing! Like to watch it a bunch of times :)

[@blackswanprepping8827]

THAT is a sharp chisel! I had my first try this weekend and it is working, though I need some better stones and practice

[@tropifiori]

My brother-in-law gave me a beat up set of pre WW II Stanley chisels. I reworked them and turned new cherry handles. It was a real pleasure

[@DaroffApFire]

I love these videos. I myself strictly use Japanese water stones to sharpen all of my blades, both tools and knives. Also, it's correct to use the non smooth side of a strop. =)

[@dr.rongoldstein1633]

Nice videos. I glued 2 pieces of leather on board - the rough side and smooth side to I can o both when needed.

[@timhunt7830]

I really like my sweetheart chisels. But I also like the Irwin steel. It seems to get really sharp. The dewalt ones are good also. At my local hardware store I got a Sheffield set 3 pc plus the single 1/4”. They’re nice also. The 1/4” one gets used a lot and it stays very sharp for a long time. Nice handles also.

[@RenThraysk]

Watched the GB axe video a while back. Since then he bought Wetterlings, and then sold Gransfors Bruks.

[@karsonbranham3900]

i like the subtle "click the like on this video"! great fun. i am i pressed with the overall performance of the wet/dry abrasive paper! great video, Cody>>Thanks for sharing!

[@scottrossgirvan8009]

Awesome series thanks. I think the Windex issue is a matter of surface tension. Water has surface tension and won't 'sit' properly. It will form droplets. Windex has chems in it that break the surface tension. An alternative is to add a few drops of Sunlight or similar dishsoap to normal water. This will break the surface tension and give you 'wet water'. It's a scale modeling trick for waterslide decals...but i think would apply here...and cheaper than Windex.

[@hardwaylearnt]

If you switch to water for sharpening add a teaspoon of washing soda to it. This will break the surface tension some and prevent rust if you are working for a long while.

[@brianwhippie2264]

Another great video Cody. I like the fact you didn't sand the Stanley logo off of the handles. Give a can of Fluid Film a try sometime. I'm sure you'll like it.

[@thomasparler2502]

Ballistol is awesome on everything even electrical contacts and it even smells good!

[@stevengoss7764]

In regards to the strop - Its on upside down for applying the compound - the compound doesnt adhere to the smooth side of leather, barbers use the smooth side without compound as leather buffs and smooths without compound

[@billyjacks6223]

This is such a great series. You did a great job addressing the "where's the step by step??" naysayers in your last video. Liked

[@GoBigC]

Something yo0u may want to look into is Aldi (yes, the grocery store) every spring, they get a set of chisels in stores in the US that are very, VERY nice for like 15 bucks!

[@MrShack2011]

I just cant say enough of how much I enjoy these video's. Again, I'm one who needs a lot of clear detail on certain things and you nailed it again my friend. Would you sharpen your timber frame chisels this same way?

[@colbycharette1421]

I've been getting an antique set from my local antique shop I found a three-quarter chisel hand forged in the US for seven dollars

[@tfull26]

Such a great series!

[@jjb2244]

The rough side is used for the first strope and the smoother side is used afterwards until the blade needs resharping

[@whowhat691]

When it comes to the leather strop i did see one person use the smooth side but they scraped it first, but the way you are doing it with the paste should work quite well

[@JusBidniss]

Thanks Cody, great info! Now I gotta go bring my chisels back up to snuff, armed with this knowledge. One more thing on the list..... Oh, and thanks for the reminder, I hit the thumbs up after 3:50! :)

[@Panzers1488]

you could also use a granite/marble tile, about $15 at your local tile store. also, a lot of stone countertop companies have lots of broken pieces that are a decent size that they'll give away for free.

[@drewuth1015]

Doing (motorcycle) cylinder heads on a flat plate, I was always taught to do figure 8's when working them as you do the back of your chisel here (and other tools in other videos- like blades for the planes). Thoughts on this?

[@grant605gb]

I have use this method too for the last 30+ years my grandad taught me how to do this when I was about 10 its staggering how dull "New" chisels and blades are these days I clicked the thumbs up button just like you asked Cody

[@dam5959]

again a nice video and nice bench. I also love to sharpen my tool it is very relaxing and therapeutic

[@RickMarshallMaps]

Thanks for the great video series. I love the Carpenter's Bench

[@RealLuckless]

One suggestion that is useful when you're trying to do a fine polish on something: Pay attention to your girts, and keep your area super clean. Store your grits carefully in protected areas where the fine grits, whether paper, stones, gels, or powders, can't become contaminated with even a single flake of a coarser grit. Work with your grits one at a time. If you're doing a set of tools, then do ALL your passes with 300 on all your tools, then clean up. Don't use the same rag you use to wipe down the tools and work area after your 2000girt pass as you did to clean up after your 300. Don't take a finer grit out of its container till you've cleaned up the coarser grit. Luckily it is merely annoying to scratch a tool after you've just polished it, but it is down right frustrating if you happen to have been working on a telescope mirror or something.

[@738polarbear]

The smooth side up is correct for the strop.

[@steveskouson9620]

738polarbear, I agree. Smooth side up, unless you want to crudely polish something. (It'll make it shiny, but NOT flat!) Cody, keep up with what you're doing. The bench is the destination, the videos are the adventure. I watch for the adventure! (And the rare shots of Mrs W. You're indeed a lucky man, Cody.) steve

[@TheHackedGamer]

Cant wait to enjoy this 18minute video! When im done cooking lunch

[@mthompson]

Try using your chisels with the bevel facing up, might work better for you when shaving and shaping the wood on the outside of a piece. Bevel down works better when "routing" out dados or rabbets and when working the inside radius of a curve.

[@FlipsDream]

Smooth side up. Thanks for all you do.

[@pipman10234]

thank you so much for that sharpening techniques, love it!

[@paladin252]

i think you are right with the smooth side. that is how the barbers would/do use it.

[@KonigsTiger581]

Definitely using the right side of the leather strop.

[@enniolima]

Just beautiful

[@grayghost296]

been watching your videos for a long time now just realized I was not subscribed so I did to help out like your videos keep up the great work.

[@richardtrepanier228]

Smooth side always up you are right

[@yveskc1]

Great video! I use water over Windex myself, actually i never used Windex for sharpening my tools...

[@samandnia]

Haha that was clever how you threw that thumbs up in there.

[@CodyJames005]

love this series!

[@bigwillyalex]

Simple Green also works very well

[@wyattoneable]

Another great video, thanks Cody.

[@andregross7420]

I sharpen plane and chisel blades with a jig from woodcraft and use stones up to 12,000 grit. You can get the scary sharp.

[@ericcorse]

I'm enjoying this series. You used the correct side of the strop, it makes no sense to use the rough side.

[@4ngu54110tt]

Have you thought about using the Ballisoil product with the rolled up rag in a can trick to use on your planes, saws etc?

[@0GregorSchultz0]

the moment you applied the oil to the handle...I immediatly smelled it (or rather the stuff I use) Light Wood Floor Oil by "Trip Trap" :D makes a great handle finish

[@mikebarnes987]

you have the correct side of the leather up.

[@BienenThor]

I'm not into woodworking but I do remember my dad having some old tools like this. But he never handled them as you do.

[@kennyd6738]

someone once said once you get over the price of a top quality good the enjoyment and use of it go on and on and on...

[@lammjame]

Cody - I love your content, but all the quality of your videos. Thanks for all the effort you put into them. Could you do a video sometime about the details of how you make a video?

[@johnyacovetti4879]

Grate video wranglerstar. Keep the vids coming. I enjoy them

[@chriscoy7040]

like it Cody real nice video can't weight too see them in action

[@bigbluemsp]

Have you looked at the Lie-Nielsen Chisels by chance? They are more pricey but still made here in the US and are of top notch quality.

[@Emothice]

Hi there, In regards to which way the strop should face, the use of either side can be compared to different grits of sand paper. The smooth side works well for finer work like polishing and touch-up on very fine or very sharp edges, and the rough side does the same job but on a much more aggressive scale. Personally, I like to start the strop with an old thick canvas or cotton belt to get rid of my burrs, then move on to the rough side of a strip of tooling leather teated with paste or compound, and finish with the smooth side. I haven't tried it myself, but I've heard good things about mixing Colgate toothpaste with charcoal dust to make a razor strop compound. But whichever way someone chooses to do a job, even if everybody thinks it's wrong wrong wrong wrong wrong, you can't argue with results.