No Crank? Jumping the starter trigger wire could get you moving again!

The relay losing its ground was the ultimate cause of the no start. Acura 3.2CL-S 6 speed , No Crank No Start
a little jumper wire got us moving again !!
#keepwrenching #wesselmotorworks #wrenchingwithkenny

[@ricardoarriaga4536]

FYI, you were right to begin with, this is a 2003, not a 2002 as you mentioned at the end. The 6MT was an option only for the 2003 model year. Great vid.

[@northpoint1039]

I would have thought that the amps running thru your small wire would have acted like a toaster :) . Thank you for the video(s).

[@WrenchingWithKenny]

The trigger wire isn't really a high load circuit. Many times the trigger side only has a 10-20a use. The main wire is a different story lol

[@TheRingersHoops]

Thanks for including the problem in the description - this video is well done great content

[@patrickostrom2762]

Stay tune! For procedure to find problem! Good video!

[@mcemct7434]

Would be interested to know what you find. Clutch or brake switch or this relay you mentioned being the problem and where it might be hidden if it is a relay.

[@luistoyota5493]

I like this guy. I want this channel to go up!. Record the issue just like you did here. Then record the solution. 😉 Thanks for the informative videos!

[@joehyundaitech7961]

hey kenny I like the wood stick in the front reminds me of my car now every now and than i have to smack the starter so i have the stick and long hf screwdriver sitting on the floor on the passenger side

[@jimdaniels2333]

So what was the problem/fix for the problem?

[@qawwertyyugggyiuiuuhinkopo748]

Yeah at least the old school jumper screwdriver or Tire until it started over

[@FindShindoHere]

Sweet

[@balakedoran7317]

do you happen to remember what the fix was to this problem?? was the signal wire frayed in a certain spot? did a relay go bad? the pgfmi? any info at all would be a great help

[@guitarded10]

What was the problem after all??

[@bukory49]

Did you have the key turn on in the ignition switch?

[@dirtbike_cody3556]

I’m having the same issue with my car and can’t figure out why. What was the issue???

[@duanedonaldson2262]

Hello Partner, just found your channel and have only watched this video so far, may I ask for a response on what percentage of your 400 videos have Oscilloscope patterns, Scan tool live data, Schematics, step-by-step diagnosis, or references to a Service Manual or online pay systems such as Mitchell or Alldata, to aid in Diagnosis along with DTC Definitions, thanks in advance for your kind response. I do understand that you may be geared towards DIYers primarily and maybe you don't use the items I have listed, much appreciated.

[@WrenchingWithKenny]

I dont have any videos that show any of that , yet. I am geared more toward the DIYers at this point, however, in the future I may start to go into some of that. Thank you for watching !!

[@pawpawbandit3871]

worn ignition's that aren't making contact, if a car is like 30 years old