X Jet M5

[@thebincleaner]

Please give this video a like ....it helps with the channel ;)

[@sergemarlon]

You know, I almost always forget to like until I read it in the comments section lol. Keep it up

[@bnscholet911]

That’s a pressure washer gun right? Not a soft wash gun

[@thebincleaner]

Hi @@bnscholet911 yes it's a high pressure trigger used at very low revs on the machine 🙂

[@neilmoye588]

That was well explained. Good show.

[@aryakalali4451]

Great explanation, Thank you.

[@thebincleaner]

Thank you Arya

[@Jayrizzle411]

Just got an xjet and I'm so confused. SH is 15%, I have a 15lpm machine and I'm after a 3% mix, what colour do I need? I've seen so many conflicting answers here and I can't seem to understand the maths haha I've seen baige on a 15lpm and a 23lpm suggested. Anyone able to explain please?

[@paulsimpson7329]

Hi, where do you buy your hypo from? Cherrs

[@deanjohnson3660]

Thanks for this video 👍

[@thebincleaner]

My pleasure

[@littlespressurewashing]

Great job bro I subscribed 👍

[@thebincleaner]

thank you

[@brandonmartin4247]

What’s the best proportioner to use if you just wanted to spray a driveway for a post treatment

[@thebincleaner]

Hi Brandon, The best one to use would be the "Beige" one, which in the UK gives a dilution of 10:1 @15lpm (4GPM US) 🤓

[@BigHomie030]

It ruins pumps too running SH through the pump. On my echo 4200 4gpm it did. Also the seals

[@ezlimo9454]

Thank you for the great video can you please tell me which color coding should I use for stucco house 4gpm pressure wash

[@thebincleaner]

I'm afraid that's something you would have to look into, sorry.

[@llmandoii8493]

Great video! Well this work on a dewalt 4000psi 3.5gpm? Or do I need to get a specific one?

[@thebincleaner]

Looking at the owners manual, it appears you would need to order the Xjet M5 -13k This is the only one that covers 3000-4000 psi and is 4GPM www.rutlandpumps.com/user/PDF%20ARCHIVE/X-Jet/X-Jet-Spec-Sheet-Parts.pdf

[@waynebreier]

How do you control the amount of sodium hypochlorite? Can you use biocides? In the xjet m5 Thanks for your videos

[@thebincleaner]

the Xjet has small changeable inserts where the chemical joins the water, these are callled proportioners and allow a set ratio of chems/water through. Yes you can use biocides through ....hope this helps and thanks for asking.

[@futbolsalacallosa]

At what pressure, does the xjet work? Thank you

[@thebincleaner]

It can be used with virtually any pressure washer, hot or cold, from 1000psi to 6000psi.

[@newbie8156]

what would a person need for just the basic set up to get started? thanks for any help you can give. i have a disability and have been looking for a company that i could start on my own and that intrest me. cant seem to find work, so this might be a possiblity. thanks again.

[@thebincleaner]

probably better to email us at [e-mail] as this could be a lengthy answer

[@daddypapi3842]

Hi, great video. What is the size diameter of the blue hose? Thank you.

[@thebincleaner]

Hi, I think it's 8mm window cleaners hose but since then I have swapped it to normal 12.5mm reinforced garden hose and a jubilee clip, so it's easier to remove from the Xjet barbed inlet... Hope this helps

[@ssplaya713]

Will this product dilute chemical’s and if so by how much? Thank you.

[@thebincleaner]

Hi, yes that is the purpose of the Xjet, to make sure you are applying the correct dose of chemicals, this is determined by little different apertured fittings called Proportioners 😊

[@renostubbs8504]

Awesome video mate, we appreciate your time and knowledge. Have a question about down streaming vs Xjet Why can't the downstream injector work like an X jet at the middle or end of the wand???

[@thebincleaner]

Hi Reno, It can mate, They can be placed at the beginning or the end of your hose. You could use a roll over nozzle holder to switch between high and low pressure if you prefer to use your chemical injector at the beginning of your hose. This way you can change pressure and leave the injector in the line. No need to return to the machine to turn off the soap. But, what if you need more than 100 feet of hose? No problem, just move the injector down the line. It can even go on the end of your wand just before your nozzle.

[@renostubbs8504]

@@thebincleaner I am just starting to advance in pressure washing, been doing it for a while but I would like to move up to make the job easier. Can you or do you have a video on how to do this,I would appreciate it mate...cheers

[@thebincleaner]

I'm sorry I can't as I don't have a downstream injector

[@renostubbs8504]

@@thebincleaner okay mate, I understand...thanks aways

[@davenicholls4433]

Hi what proportioner are you using for your Hypo

[@thebincleaner]

Hi Dave, I use the beige coloured one 16:1 😉

[@JJ-jc3fq]

Hi mate, did you not dilute the SH at all yourself? Just straight streamed it into the water?

[@thebincleaner]

Hi, That correct, the XJET has changeable proportioners that do the diluting for you. Different ratios for different chemicals 😉

[@PerfectPressureWashing]

Class thanks for that, going to order one saves me time rather than using a watering can and brush. Saves a bit of sweat aswell haha

[@thebincleaner]

you won't regret it

[@zacky180]

Wats the reason for washing up liquid in mix of hypo

[@thebincleaner]

Hi, it acts as a surfactant and helps the hypo adhere to the surface for longer rather than just run away, also helps to see where you have covered :) Hope this helps

[@elil8598]

How much does it get diluted? Do you always get a accurate mix?

[@thebincleaner]

Hi Eli, when using the appropriate proportioner the 15% SH gets diluted 16:1 on a 23lpm machine.. The mix should be permanently accurate 😀

[@johnmolloy2239]

What is the best strength to get it mixed at

[@murtaghslawncare5861]

I’m confused. I thought you could get as low as 1:3 on an x Jet , so starting with 15 % should get around 5%% at the nozzel. Forgive me I’m only starting out…

[@Cleanuproofcleaning]

How much washing up liquid to the drum of hypo?

[@thebincleaner]

I use a 10 litre drum of hypo (easier to carry round) and in that I add about 2 x 5second squirts of Aldi's Magnum washing up liquid ;) Hope this helps

[@user-zs4nn9hl6i]

What do you mix your hypo at

[@thebincleaner]

it depends on the severity of the black spot...usually about 4%

[@lukezane143]

Is that just your normal pressure washing gun you attached to the x jet

[@thebincleaner]

it is just a basic trigger with a small QR extension that the Xjet connects to so I don't have to lea as far

[@davidfisher3273]

Is the hypo ok on cars?

[@thebincleaner]

Nooooo.

[@bankruptsee]

How hot of a mix can it provide?

[@thebincleaner]

if you leave the proportioner out then it will be at it's "hottest" ...depending on the LPM or GPM machine...ie 21LPM will give a ratio of 2 : 1

[@dylanthornsberry8778]

Wait it doesn't dilute it AT ALL? really

[@thebincleaner]

Yes it does, as you use the Pressure Washer it draws(pulls) the chemical into the M5 nozzle, diluting it there 😉

[@StudyProof]

You got a 3% mix of SH coming out of the tip, right?

[@thebincleaner]

yes, I was using the beige proportioner as recommended :)

[@coachnate5747]

Doesn't x jet not recommend using SH and proportioners

[@bennybenny7217]

@@thebincleaner did you not say the beige proportioned dilutes at 16:1 ? If that the case you only get 0.9% final solution. You’ll have to dilute at 5.3:1 to get 3% at the tip when drawing from 15% stock hypo.

[@thebincleaner]

@@coachnate5747 I don't know where you heard that as they mention SH on their proportioner chart

[@thebincleaner]

@@bennybenny7217 that depends on your lpm (gpm) machine Xjet provide a chart that includes the mention of SH for the Beige proportioner copy and paste this www.google.co.uk/url?sa=i&url=https%3A%2F%2Fwww.jracenstein.com%2Flearn%2Fexpert-advice%2Fx-jet-chem-sprayer-for-building-cleaning%2Fa192&psig=AOvVaw2IT2MH6grozv5wf43sdgAP&ust=1666568577423000&source=images&cd=vfe&ved=0CAwQjRxqFwoTCMin5JyC9foCFQAAAAAdAAAAABAD

[@spotlesspressurecleaning1]

Hi Stuart did you no when you put washing up liquid with hypo you are making mustard gas bad idea

[@thebincleaner]

this brand washing up liquid does not contain any ammonia, I've had worse when peeing in the bucket I once had hypo in...now that's bad ! 😄

[@spotlesspressurecleaning1]

@@thebincleaner 👍

[@volkregjaku2295]

What kind of chemical is that

[@thebincleaner]

it says in the video ...Sodium Hypochlorite 😉

[@timjesse8267]

and then I have to carry that heavy container along as I spray. Get a longer hose dummy! And put a cap on the container with a snug hole in it for your feed line and hose won't come out of the container dummy!

[@thebincleaner]

thanks for the constructive advice but why do you feel the need to insult me ?

[@timjesse8267]

@@thebincleaner Just jokin, sorry

[@kevinmcquitery4543]

Can you use it to rinse off a driveway or house after you've applied SH?

[@thebincleaner]

yes sure, some of them come with QR chemical hose so you aren't dragging it around while rinsing.

[@rabbitskinner]

X jets are heap of crap, there are loads of better options, 12v pump, 240 pump, and petrol powered pumps. X jets dilute sh too much even with no insert.

[@leehodgkiss6709]

What a sausage