very nice sir... explained in simple & well structured way... good editing as well... keep on uploading such videos.... Thanks
@harkiratsingh70145 жыл бұрын
Thanks for your efforts. Really appreciate your dedication in disseminating the knowledge!!!
@learnandapply5 жыл бұрын
Thank you for your valuable comments...
@austinreimer66963 жыл бұрын
Thanks man this is really helping me through collage
@learnandapply3 жыл бұрын
That's great! Thank you so much for your valuable comments and appreciation!
@supriya-td7ou6 ай бұрын
Nice explanation. Thanks 😊
@learnandapply6 ай бұрын
Thank you for your valuable comments and appreciation! 🙏☺️
@supunmalinthasandanayaka8852 жыл бұрын
Thank you very much for your clear explanations!
@learnandapply2 жыл бұрын
Thank you so much for your valuable comments and appreciation 🙏☺
@berkaycakr74259 ай бұрын
thank you for this useful video.
@learnandapply9 ай бұрын
You're welcome! Thank you for your valuable comments and appreciation! 🙏☺️
@krishanmohansharma83065 жыл бұрын
Very well explained. Thank you for your efforts. 👍
@learnandapply5 жыл бұрын
Thank you for your valuable comments..
@maryamfaisal83662 жыл бұрын
Very helpful ✅
@learnandapply2 жыл бұрын
Thank you so much for your valuable comments and appreciation 🙏☺
@forrestpanda4 жыл бұрын
thank you! The video is great! It would be much appreciated if you could add caption in your video!
@learnandapply4 жыл бұрын
Thank you for your valuable comments.. The captions take a wrong spellings many times, but I will try it..
@vageeshv.prasanna62226 жыл бұрын
Thanks for the information, perfectly explained
@learnandapply6 ай бұрын
Thank you for your valuable comments and appreciation! 🙏😊
@batakrushnamahapatra55158 ай бұрын
As i could see , p chart & u chart has been explained , but i could not find the c & Np chart explnation any where . Do we have the same however.
@learnandapply8 ай бұрын
The only difference between charts is with fixed and variable sample size. Both are also get cover in in p and u chart.
@phanisec4 жыл бұрын
Well explained. Thank you
@learnandapply4 жыл бұрын
Thank you so much for your valuable comments. Please share it with your friends and colleagues.
@esampop80832 жыл бұрын
Respected Good instructions 3.30 that means every point in chart represents (3 Samples)?
@learnandapply2 жыл бұрын
Thank you so much for your valuable comments and appreciation 😊🙏 Yes, every point is represent a subgroup of size 3 in this example.
@ahmadmuhamadahmad48566 жыл бұрын
Great job 👍🏻
@learnandapply6 ай бұрын
Thank you for your valuable comments and appreciation! 🙏😊
@miltonjomochirwa46116 жыл бұрын
Thanks...Found it helpful
@learnandapply6 жыл бұрын
+Milton Jomo Chirwa Thank you for your valuable comments.
@user-bn9xv5rw9v6 жыл бұрын
Useful information sir
@learnandapply6 ай бұрын
Thank you for your valuable comments and appreciation! 🙏😊
@ashishtiwarijshl-stkmill56144 жыл бұрын
Thanks
@learnandapply4 жыл бұрын
Thank you for your valuable comments.
@malakafernando14104 жыл бұрын
this is good.. some of your videos are bit faster..... some critical subject try to slow down....
@learnandapply4 жыл бұрын
Ok, thank you so much for your valuable comments
@vickypawar7724 жыл бұрын
You can adjust playback speed...
@A44562g4 жыл бұрын
Please show us how to create the Xbar-R and Xbar-S chart using Microsoft Exel!
@learnandapply4 жыл бұрын
Thank you so much for your valuable comments. I will do it in my future videos, once the current topic is covered.
@danielbarreto52384 жыл бұрын
I would like to know what should I do if the subgroup sizes are unequal?
@learnandapply4 жыл бұрын
Thank you for your appreciation and valuable comments. In that case, please add all subgroup sizes in one column and select the column containing subgroup sizes in subgroup size tab.
@anisfredj33304 жыл бұрын
sir, is there any bibliography to read for further informations ? please add the link below, thank you
@learnandapply2 жыл бұрын
vijaysabale.co/spctools
@Jojo-ms4be6 жыл бұрын
Thank you so much..!
@learnandapply6 жыл бұрын
Thank you for your valuable comments..
@mosimpathan75446 жыл бұрын
great....
@learnandapply6 ай бұрын
Thank you for your valuable comments and appreciation! 🙏😊
@VENKATASAIPRASAD4 жыл бұрын
How to plot x-bar chart for subgroup size is 1?
@learnandapply4 жыл бұрын
Please put the subgroup size as 1 in that case.
@chintanmorye6 жыл бұрын
I want to understand the Gage R&R study and how to interpret the graphs .Please upload Gage R&R video Thank you
@learnandapply6 жыл бұрын
+Chintan Morye Thank you for your valuable comments Chintan. As you can see, I am covering tools and techniques sequentially to understand Six Sigma in deeper way. I will be explaining MSA in Measure phase videos. Is it okay?
@gggeetss6 жыл бұрын
very well expalined. Kindly tell me how to develop xbar s chart for preassessment, PDSA 1, 2, 3, 4 in one chart and how to interpret them all together
@learnandapply6 жыл бұрын
+Geetanjli Kalyan First of all, thank you for your valuable comments Geetanjli. I think from the video Xbar-S chart must be clear to you. We can draw Xbar-S chart when data is continuous, collected in subgroups and subgroup size is more than 8. Now, as you had asked for Pre-assessment and PDSA (Plan-Do-Study-Act) along with this control chart, it will be having 3 phases of the same control chart. 1st phase, we can called it as a "Baseline data". In this phase, we draw the Xbar-S chart, we can refer it as a "Pre-assessment". 2nd phase is about "Post intervention data". In this phase, which indicates effectiveness measurement of actions we had taken by following Plan-Do-Study-Act or in other words, Study the impact and then plan further actions. This will continued till we get the desired results. And the 3rd phase is about "Continuous monitoring" to ensure presence of assignable cause immediately and correct it.
@learnandapply6 жыл бұрын
+LEARN & APPLY I think, I have answered your questions. Let me know your feedback. And thank you again for your such an important query as well as support to my channel.
@yesimselbes62464 жыл бұрын
Dear Friend, I want to ask some question about QC charts? I want to show stability on batch to batch samples with QC charts. Can you help me?
@learnandapply4 жыл бұрын
Sure, can you please elaborate it in detail? Are you collecting data in subgroup? What is your data type?
@atulkumar37444 жыл бұрын
For samples collected on same day but at irregular intervals and from different locations does it fall in subgroup sample or no subgroup sample?
@learnandapply4 жыл бұрын
No, it's not the subgroup. Thank you for your valuable comments.
@ashishranjansr.manageroper14916 жыл бұрын
Hi This is great tool to create video . Can you share the name of tool used .Great video too.
@learnandapply6 жыл бұрын
+Ashish Ranjan (Last Mile Quality-North) Thank you for your valuable comments. This is Videoscribe. Please share these videos in your entire group improve their life at professional level.
@arihantsinghi96866 жыл бұрын
Sir.. The subject was very well explained.. I wanted to know what application do you use for making such videos.. I, myself being a tutor of A level mathematics, wanted to make such innovative videos for better understanding of the students. Would it be a problem if you tell me that??
@learnandapply6 жыл бұрын
First of all, thank you for your valuable comments. It is very nice that you want to share your knowledge. It's " VideoScribe".
@arihantsinghi96866 жыл бұрын
Thanks a lot sir. ☺️
@jayanthmahendra52266 жыл бұрын
Why is X bar value different in X bar R and X bar S charts? Please explain.
@learnandapply6 жыл бұрын
Both are same..
@thesonshinestate5 жыл бұрын
I was under the impression that XBar-R charts were for constant subgroup sizes between 2&10. Is this not correct? Is this a recent change in Lean? please advise. My current course material has that range listed.
@learnandapply5 жыл бұрын
Thank you for your valuable comments. You can use Xbar-R charts for subgroup size up to 8 and use of Xbar-s chart will be more accurate for subgroup size more than 8. Using Xbar-R chart for subgroup size 9 or 10 won't be wrong, but Xbar-s chart will be more accurate, logic is same as that of difference in Range and Standard deviation...
@learnandapply5 жыл бұрын
Please let me know if you need any further details...
@Salma-pv6xc3 жыл бұрын
Please add the eng sub 🙏🙏
@learnandapply3 жыл бұрын
Ok, thank you so much for your valuable comments 😊
@rahulmukhnerjee5y1365 жыл бұрын
how to calculate stable mean??
@learnandapply5 жыл бұрын
Thank you for your valuable time. But didn't get your question?
@ramkumarsathasivam42616 жыл бұрын
Good...Can we share to my facebook pages ?
@learnandapply6 жыл бұрын
+Ramkumar Sathasivam Thank you for your valuable comments. Absolutely, you can share it with your entire group. I have started this channel to share knowledge and thereby improving lifestyle of people at professional level. Please share it as a KZbin link.
@josematos36314 жыл бұрын
I can tell this is a great and informative video, but I cannot understand what you're saying
@learnandapply4 жыл бұрын
Thank you for your valuable suggestions. Can I add subtitles for this video?
@Bhagya_Lakshmi10046 ай бұрын
Please remove the background music
@learnandapply6 ай бұрын
Thank you for your valuable comments. Let me check if I can do it.
@rohitvadgaonkar67234 жыл бұрын
Awaaj Kam hai...
@lebest84153 жыл бұрын
Sir thank you so much for this video sir I wall subscribe what is your email?
@learnandapply3 жыл бұрын
Thank you so much for your valuable comments and appreciation! info@learnandapply.org
@lebest84153 жыл бұрын
@@learnandapply I am wondering how can I make my time plot graph neater? the data looks too fit together