I never tire of watching repair videos like this. Keep them coming.
@Josh.Davidson2 жыл бұрын
Thanks!
@gameonuk91692 жыл бұрын
Absolutely awesome work Josh, as always, love these repair videos. Very nicely done 👌👍
@Josh.Davidson2 жыл бұрын
Thanks my brother
@cyx1282 жыл бұрын
I never get tired of seeing this, but I miss the music in the background. good video and good job. (sorry for bad english :) )
@Josh.Davidson2 жыл бұрын
Sorry. I didn't know what music to place
@OPUS_TV2 жыл бұрын
Never seen a BGA repair before. I teresting to watch the process. Also good to see a JTAGable board be saved instead of being recycled due to RRoD Good Job 👍
@Josh.Davidson2 жыл бұрын
Thanks! If you see my channel there is many videos of BGA rework.
@jhawkzzz2 жыл бұрын
So cool! Do you have a list of the tools you use posted anywhere? (Your soldering irons, brands of flux, solder, heat gun, etc.) Thatd be very interesting to know!
@Josh.Davidson2 жыл бұрын
Not really. Here's a few: Iron: Weller WES51 (Analog), tip shown here is ETKN Flux: NC-559-V2-TF Genuine Wick: Goot CP3515 or MG Chemicals 426LF Hot Air: 858d El Cheapo BGA Rework: DIY
@jhawkzzz2 жыл бұрын
@@Josh.Davidson Wow thanks! I'm surprised more people haven't asked for this. You've obviously got a talent for this stuff so it's very helpful to know what tools you prefer & recommend.
@Josh.Davidson2 жыл бұрын
@@jhawkzzz Thanks friend :) Probably someone did and I told it, and just forgot about it :D
@rastasmoddedgamingcommunity2 ай бұрын
Hey Josh, I was curious if you recommend anyone to do these kinds of repairs since you no longer focus on providing services. Love these GPU replacements and having a xenon console last is something I am very interested in. Thanks for all your support over the years and thanks for your time!
@Josh.Davidson2 ай бұрын
Not until I am home in December.
@rastasmoddedgamingcommunity2 ай бұрын
@@Josh.Davidson Would love to save a few systems for you if you are open to it! Thanks for the reply
@ZZARevolution Жыл бұрын
Thank you for this video! I'm a total noob when it comes to this. I have an old Xenon model and would love to play my old 360 games again. You helped me identify the problem. For a noob without skills and proper tools, do you think it's wiser to just buy a refurbished 360 Elite for 50 bucks or try and replace the gpu myself? (It would probably be more expensive buying all the tools right?)
@Josh.Davidson Жыл бұрын
Glad you enjoyed! Buying all of the tools and equipment is at least a thousand dollars, so cheaper to replace the system.
@ZZARevolution Жыл бұрын
@@Josh.Davidson Thanks a lot! Sucks that's you're US-based or I would've gladly paid you repair it haha! Is there any specific model you'd recommend? The Slim, E or Elite? Latest E model is probably the safest bet in terms of reliability right? Heard you say the Kronos is the best mobo, but I don't think these online second-hand shops here go into the specifics.
@Josh.Davidson Жыл бұрын
@@ZZARevolution A Jasper is the best reliability whether Tonasket or not. Or, yes, aim for a Corona model E slim or if you don't care about modding the Winchesters are solid.
@NetYarozeGR8 ай бұрын
Hi! i have a spare GPU ELPIS X819193-002 and i want to replace my dead XENON GPU. Besides soldering the new GPU, are there any more steps to do in order to get it working? Or just plug n' play?
@Josh.Davidson8 ай бұрын
Just fix the thermal targets to Xenon (Refurb). Otherwise plug n play.
@liptonacer2 жыл бұрын
Good Job : Josh Davidson
@cuzyy2 жыл бұрын
I love your vid man, you are my favorite chanel
@nateg78352 жыл бұрын
Hi, which BGA rework station did you use for this? or do you have any recommendations?
@Josh.Davidson2 жыл бұрын
It’s custom. You need at LEAST IR-8500
@console_master Жыл бұрын
Hello Josh. Please tell me Xbox 360 Falcon errors 0022 (35-37 seconds) and sometimes 0020 (25 seconds). In the console, the original nand dump. Is it a problem with the GPU too?
@Josh.Davidson Жыл бұрын
Hello, I can't know from that info, you can start here: errors.octalsconsoleshop.com/details/0022 If this not work, then you need to get the post code.
@grandtheftauto12332 жыл бұрын
Wow man great job your BGA rework skills are impressive. I recently discovered I have a jtagable 7371 Xenon but it throws rrod with 0102 once in awhile. Is it even worth saving?
@Josh.Davidson2 жыл бұрын
That is up to you. The repair of 0102 properly is expensive. If it is worth it to you, then yes.
@grandtheftauto12332 жыл бұрын
Cheers josh you’re right. Thanks for your reply. I’ll probably sell it as is and perform RGH on a jasper I’ve got laying around. Just need a nand flasher 😂
@evanb44662 жыл бұрын
This is awesome!
@Filthycasual1232 жыл бұрын
I love these videos I wish the 360 was designed better one of the worst consoles I own but I love it
@Josh.Davidson2 жыл бұрын
It wasn't designed bad, there were issues with the underfill and manufacturing of most GPUs at the time... remember NVIDIA and ATi graphics issues?
@Filthycasual1232 жыл бұрын
@@Josh.Davidson true true I had tries to block that fiasco from memory lol
@XboxConnoisseur9949 ай бұрын
Oh cool! I have code 0110 on my 2008 Falcon model Xbox 360 Elite which indicates a faulty RAM chip, so I plan to try to replace that chip.
@Josh.Davidson9 ай бұрын
No, mostly its GPU. RAM is unusual to fail. GPU is defective on many models from early/mid 08. You need new GPU 99%.
@XboxConnoisseur9949 ай бұрын
@@Josh.Davidson ah I see. I’m new to this whole thing, but thanks for the info. Thankfully it had a good disc drive, so I can use the disc drive on a Jasper unit I just got with a bad drive.
@LeeZhiWei82192 жыл бұрын
Btw josh, I see that the suction tool you are using to take off the gpu is the same one as dosdude1's? What a weird coincidence.
@Josh.Davidson2 жыл бұрын
Hello. Its common model suction tool. It not a handheld, has a base station to connect the vacuum.
@xanner82 Жыл бұрын
Can you recommend where to find CPU units?
@Josh.Davidson Жыл бұрын
Aliexpress
@TheRealTRENSDEBERROFRSince20227 ай бұрын
Hello What happens when i swap the Dead Xenon GPU to OPUS/Falcon/Zephyr GPU? My Error Code is 0020
@Josh.Davidson7 ай бұрын
You can't without significant trace rework. See my 65nm swap video.
@caretchara Жыл бұрын
How do you keep the new solder balls on the chip? Does the new chip come with solder already on it? Or do you stick the new solder balls on the motherboard first? This step always confuses me lol
@Josh.Davidson Жыл бұрын
The new chip come with solder ball already. You can see my Jasper E 74 video which shows how I reball the processors when I pull them from a board.
@mrxhashir8873 Жыл бұрын
The aluminimum balls you removed from the spot of older chip Are already on the New chip or It can work without that??
@Josh.Davidson Жыл бұрын
It is not aluminum; the solder balls are applied to the new chip already.
@francescogrilli76203 ай бұрын
Hi can you please tell me every tools that you need to replace the gpu?(sorry for my english) i have a xenon 360 that sometimes have the 0020 error and sometimes 0022 error, do you thing that reballing the gpu can solve my problem?
@Josh.Davidson3 ай бұрын
Reballing NOT solve problem. Need NEW chip. It is very complex you need special rework training and tools.
@drboom22 жыл бұрын
Greetings Josh! Recently I've been facing a frustrating issue. Every time I wake up, I find a well done steak on my night stand. This is frustrating for two reasons. One, I have no clue where these steaks are coming from and two, I hate a well done steak, I greatly prefer medium-rare. Have you faced this issue before? Do you have a solution? It's seriously been driving me mad. I wish to stop these phantom steaks! Sincerely, Your good friend, Dr. Boomhauer
@Josh.Davidson2 жыл бұрын
Greetings Dr. Boomhauer, Unfortunately we do not know anything about that type of business. We only know about motherboard repair. Kind Regards, Josh
@drboom22 жыл бұрын
@@Josh.Davidson This is unacceptable! Answer my steak inquiry or face the consequences, small boy!
@itailevin2 жыл бұрын
Have you tried to restart the steak?
@Josh.Davidson2 жыл бұрын
@@drboom2 You are best advised to contact God for guidance.
@StepBro18 Жыл бұрын
I have found a service date 2010 zephyr. Is there a way to tell if the gpu was replaced by Microsoft? Or did they even do that? Thank you in advance
@Josh.Davidson Жыл бұрын
Please tell me all the text on top of the GPU die and I can tell you. (or a picture, but KZbin will filter out links, beware)
@ionutdumitru9926 Жыл бұрын
What do you need to do for switching the chips? I didnt understand very well
@Josh.Davidson Жыл бұрын
A BGA rework machine, flux, good soldering iron, balls, chip, etc.
@steamingrefuse2 жыл бұрын
Out of curiosity, will Zephyr_B take a RHEA GPU or are they pin swapped like Zephyr_A and Xenon?
@Josh.Davidson2 жыл бұрын
Zephyr_B and Zephyr_C are same pinout. RHEA GPU can be realized on that board. Essentially Y2 and RHEA are same, except the eDRAM. RHEA is even codenamed Y2.5.
@steamingrefuse2 жыл бұрын
@@Josh.Davidson Awesome. One more thing... I found a good deal for a Xenon that was serviced in June 2008. I know it could've been sent in for anything, but have you seen Xenon's from that era with Elpis GPU's?
@Josh.Davidson2 жыл бұрын
@@steamingrefuse Serviced could be a toss up. Maybe some got new GPUs and some were serviced for other reasons. The refurb boards usually fitted with new GPUs are in "MFR date" cases 2007/2008/2009+
@steamingrefuse2 жыл бұрын
Just wanted to come back to confirm that yes- just because a Xenon has a 2008~ service date doesn't mean it has the Elpis GPU installed. I bought 3 Xenons that were serviced between 2008-09 and they were all either 57 or Y1 Korea, with one of the Y1's sadly being 0102. EXT_CLK works great on both 57 and Y1 though in my testing, getting near instaboots with both Matrix and CR4... seriously appreciate the work you guys have done to make these older systems exploitable.
@Josh.Davidson2 жыл бұрын
@@steamingrefuse Hi Don't know what you mean CR4, I never made EXT_CLK for him. Elpis start appearing in 2009 btw, but serviced might not always get. Usually I see MFR date with him. Btw - GPU 57 is actually a prototype GPU. All X02056 or X817791 GPUs are Y1 (year 1) design.
@Ghetto187Murda Жыл бұрын
I need this repair I have a blades dashboard 360. Let me know how I can contact you for this service.
@Josh.Davidson Жыл бұрын
octalsconsoleshop.com
@karlblomstrand4445 Жыл бұрын
Hey Josh. I have a halo 3 speciell edition Whit jasper bord. When i turn it on the fan start whit max speed and it only flash red. Is this the right fix? Or should I get a falcon bord and change? Thanks for the help
@Josh.Davidson Жыл бұрын
Sir you need to tell me the secondary error code.
@karlblomstrand4445 Жыл бұрын
@@Josh.Davidson hello. the code say 0013 but now when i try to start it its try to boot for about 30 to 50 sekunds. thanks for the help
@Josh.Davidson Жыл бұрын
Incorrect heatsink mounting or damaged thermal sensor in the eDRAM (small die on the GPU)
@karlblomstrand4445 Жыл бұрын
@@Josh.Davidson thanks. I will serch. And maybe do a full replacment to se if I my have same nolege
@Jako05168 ай бұрын
How much would you charge to fix my xbox 360? I'm looking to get my gpu fixed
@Josh.Davidson8 ай бұрын
I am not taking new orders right now.
@Jako05168 ай бұрын
@Josh.Davidson okay let me know. I would love to get my zephyr 360 back working again because of nxe. I don't want to jtag it or anything. I just want to have it running and be able to play it without being touched but gpu fix. How much do you charge if you do fix it for me?
@duckmansweb2 жыл бұрын
What flux do you prefer or use for BGA work ?
@Josh.Davidson2 жыл бұрын
Genuine Amtech NC-559-V2-TF
@duckmansweb2 жыл бұрын
@@Josh.Davidson From northbridge fix? - seems to be the only place to buy genuine
@Josh.Davidson2 жыл бұрын
@@duckmansweb I buy it from Louis Rossmann, cheapest for quantity and very close to me.
@cameronabernathy46752 жыл бұрын
notice it had a elvis chip which i had good luck with on my xenon. it just recently got 0102
@Josh.Davidson2 жыл бұрын
No, it’s RHEA. 80nm. Elpis was based off RHEA.
@cameronabernathy46752 жыл бұрын
@@Josh.Davidson well it was pretty good to me either way man
@jackkirby73923 ай бұрын
Where did you get the chip?
@Josh.Davidson3 ай бұрын
AliExpress.
@TheOldTelephone Жыл бұрын
Would it even be possible to put a jasper gpu on xbox 360 s XD
@Josh.Davidson Жыл бұрын
No.
@robertakizuki98063 ай бұрын
Awesome i wish i have that kind of skill. I took mine to repair shop telling me its dead
@Josh.Davidson3 ай бұрын
Most repair shop not do BGA rework.
@carwashreviewsandmore76092 жыл бұрын
Where do you get your GPUs from?
@Josh.Davidson2 жыл бұрын
This chip is 2010 purchased from ALIEXPRESS. It arrived with lead-free balls but I changed it to leaded.
@carwashreviewsandmore76092 жыл бұрын
@@Josh.Davidson Ah I see. Do you do this as a service? If so where can I get in contact with you? I have a Falcon that gets E74 every once in a while. The secondary code is the cold solder joint.
@Josh.Davidson2 жыл бұрын
@@carwashreviewsandmore7609 It is NOT a cold solder joint. Please completely disregard stupid sites like x-ex. The real code meanings can be found on my site: errors.octalsconsoleshop.com Solution in that case of E 74 is to REPLACE the GPU. Anything like reflow/reball is a bandaid fix that will only last for a 2-6 months! The fault is NOT in the BGA soldering like everyone thinks, that is an absurd myth. I don't really do rework as a "service" in the typical sense, more as a "paid favor" to friends or people I know - and also only if it's worth it, like JTAG, XDK, etc. Otherwise the price makes no sense.
@carwashreviewsandmore76092 жыл бұрын
@@Josh.Davidson Ah ok. Thanks for the tip! I’ll go check it out. Do you know anyone who does RROD fixes professionally? Like fully replacing the GPU?
@Josh.Davidson2 жыл бұрын
@@carwashreviewsandmore7609 If you really wanted it done, I could probably do it for you in a few weeks. Pricing is $100. So usually only worth it for JTAGable, XDK.
@RedOverlord2 жыл бұрын
This is RedOverlord
@Josh.Davidson2 жыл бұрын
This is Josh.
@BigBoy-nz9mc2 жыл бұрын
Hey sir do you have any type of social media I can contact you if I have questions? I recently bought a zehyr and I'm pretty sure it has a dead gpu because it was said to have rrod. Thanks brother would like the help.
@Josh.Davidson2 жыл бұрын
I have replied to your other comment
@KhetheloSeluleko3 ай бұрын
I wish you could do it for me🥺
@ItNoWorky Жыл бұрын
is the date on the gpu die?
@Josh.Davidson Жыл бұрын
Yes.
@ItNoWorky Жыл бұрын
@@Josh.Davidson where exactly I cant quite read it, does the X02056 have a date as well to determine if its a high tg revision?
@Josh.Davidson Жыл бұрын
xenonlibrary.com/wiki/Y1_(GPU) In the first picture, the date code is "0550" aka 2005 week 50. In the second picture it is "0824" for 2008 week 24. Then the third picture further down the page is "0819" for 2008 week 19. That is the earliest fixed chip I have seen. I have seen defective chips as late as 2008 week 11.
@ItNoWorky Жыл бұрын
@@Josh.Davidson As I feared my 0607 is definitely not a high tg revision then, weird its still working though??
@Josh.Davidson Жыл бұрын
Luck I guess :D I have a few low tg still working.
@itailevin2 жыл бұрын
JTAG?!
@Josh.Davidson2 жыл бұрын
Yes
@Wmtechzm2 жыл бұрын
its jasper GPU
@Josh.Davidson2 жыл бұрын
No, I am change it for another 80nm GPU RHEA which was manufactured in 2010. MS continued producing fixed version of both RHEA and ELPIS 80nm to fix RROD Xenon Zephyr Falcon until 2011.
@Repeatingpower72 жыл бұрын
@@Josh.Davidson Are the pinouts same between the 80nm GPUs and the Jasper / Kronos 65nm GPUs?
@Josh.Davidson2 жыл бұрын
@@Repeatingpower7 Yes - but if you don't make other changes to the motherboard (which so far are only possible on Falcon), the GPU will DIE!
@Repeatingpower72 жыл бұрын
@@Josh.Davidson Oh ok thank you for clarifying. Maybe one day someone will figure out the necessary modifications that are required for the Xenon and Zephyr motherboards so the the 65nm GPU can run properly on them.
@Josh.Davidson2 жыл бұрын
@@Repeatingpower7 My pleasure. Actually I am working on exactly that. Stay tuned my channel!