XGIMI Halo Plus Calibration Guide - The Best Image Quality & Accurate Colours!

[@jayceooi]

Buy XGIMI Halo+ 1080P Portable DLP Projector at AliExpress @ bit.ly/3FbMvYH Amazon @ amzn.to/3ZbJ8c8 Lazada @ bit.ly/3SGmXbu Shopee @ shope.ee/6ADlkztnm4 ✅✅ Top Projector Chart @ bit.ly/2GHyqXy ✅✅

[@wrgtec]

thank you excellent explanation!👏

[@jayceooi]

Thank you too!

[@matteomiotto6625]

@Jayceooi another question: was your calibration done with the hdmi source? Do you think it's valid even with a gain 1.2 screen? Thank you

[@jayceooi]

Yes. Just try and see. Shouldn't be that far.

[@matteomiotto6625]

I tried your settings and actually the colors are more real and I will use them for the 4k fire stick that I use to remove the hdr that in the native halo+ apps it is impossible to remove without slashing the colors. A note: when using hdmi you lose some image brightness so I still prefer xgimi's native apps💁‍♂️

[@atulmalhotra2303]

I want to buy XGIMi H6 Joyce. What is your opinion about it ?

[@jayceooi]

Can't comment unless I hand-on it. Sorry...

[@DommtheDon]

Thank you! I have a question though, do you experience hiccups and/or stuttering in an external speaker if connected via Bluetooth? I did an update and can't remember if it worked well or not before the update and don't want to factory reset until I think that it could be the issue.

[@jayceooi]

No such issue on Bluetooth.

[@АлинаВельович]

Once you connect, get out of app and reenter.

[@Missing0o0]

Thank you for the video, a great help. Would it be possible to do a calibration for games? I'm playing Baldur's Gate 3 on the Xbox Series X and I feel like the game looks terrible in game mode. Looks like it's 720 or lower resolution and the colors and brightness don't look good. It's very frustrating trying to get it to look right in custom mode.

[@jayceooi]

Sadly, not possible in game mode.

[@Missing0o0]

@@jayceooi Oh, that's too bad. Your custom settings did help my game look better. Guess I'll keep playing with the custom settings to see if I can make it look a bit better.

[@nikunjfotedar3716]

Hey Jayce, are you going to give a review for Xcimi halo + ??

[@jayceooi]

Yes, when free. But no idea when... What do you want to know?

[@HB238]

What type of screen works good on this projector? Is ALR a good option for this projector? Found an Elite screen but states standard throw of 1.5 and this is Halo+ is 1.2. What is a good fL (Foot Lambert) for this projector given it's true ANSI lumens?

[@ameenmiah]

What’s better the nebula capsule 3, mogo 2 pro, or halo plus.

[@Χιονατη69]

@@ameenmiah Halo+

[@HistoryShortsPH-dr5gh]

xgimi halo or wemax dice? The price is 180 dollar difference.

[@jayceooi]

If you need 3D and better colour management, Halo+. Else Dice.

[@riccardosassi7816]

Can you write all the custom pictures parameters after calibration? Thank you

[@jayceooi]

Can't you watch the video? 😅

[@riccardosassi7816]

@@jayceooi ahahaha of course but i don't understand the correct and definitive settings. I write it down below: Brightness: 50 Contrast: 45 Saturation: 50 Sharpness: 100 or 0 ? Noise reduction: off Color temperature: Custom Red: 50 Blue: 49 Green: 45 and the others? HDR, movement compensation ? Thank you ;-)

[@jayceooi]

@@riccardosassi7816 No right or wrong here. Just set the values that suits your taste. And enable those functions that you need.

[@matteomiotto6625]

@Jayceooi I have a 100 inch 16/9 gain 1 screen. Are your settings also good for the hdr or is the image too dark? Do you prefer the halo plus or the xiaomi smart projector 1?

[@jayceooi]

Yes. Halo+.

[@matteomiotto6625]

@@jayceooiHow do I de-dify the hdr to get beautiful images? If I bring the hdr button off the images are too faded, if I put a chromcast stick without hdr then the images are very good.Can't you get from the projector settings to have good non-hdr images without using chromcast? Thanks

[@jayceooi]

FYI, HDR is just decoding. Halo+ has Rec709 coverage only. So SDR is better. No point to enable HDR. It won't look better.@@matteomiotto6625

[@matteomiotto6625]

⁠Yes I understand, but then to see well all the signals sdr then I have to put a hdmi stick because with the native apps here I disable the hdr I imagine they are washed out right?

[@jayceooi]

@@matteomiotto6625 Nope, just don't enable HDR on your TV stick.

[@monolithsoft_guy]

Hey, is that "white space inside words" issue very visible when playing in game mode?

[@jayceooi]

Sadly, yes. Feedbacked to XGIMI. They don't want to fix it. 😢

[@monolithsoft_guy]

@@jayceooi wow, damn. This is the first time I've heard about this issue. No review mentions it. But there's no other projector out there as good as the Halo+ without this issue, is there?

[@jayceooi]

@@monolithsoft_guy They are not as careful as I do. 😋 For what I tested, an Optoma discontinued projector is better than Halo+. Below 10ms input lag only.

[@marcobilardo7075]

Does this work for the Halo first generation?

[@jayceooi]

No idea, sorry. Please check with XGIMI Support.

[@dontbelikeflorin]

These settings are working on screen protector? Because mines aren’t changing anything they stay the same.. even in custom mode.

[@jayceooi]

Video and HDMI only. Android UI has no effect.

[@dontbelikeflorin]

@@jayceooi I am new into this. Can you explain me about VIDEO and HDMI only? Video on what on a TV?

[@jayceooi]

@@dontbelikeflorin Huh?

[@dontbelikeflorin]

@@jayceooi do i need to connect my halo+ to a tv to change those settings?

[@jayceooi]

@@dontbelikeflorin No

[@paolofasano5312]

Hi Jayce! Halo+ is better than Wemax Dice?

[@jayceooi]

In short, yes. But not every aspect wins.