XIAOMI M365 PRO 2/3 - Installing Bumper Protector And Cable Protector

I install the bumper and cable protector on my Xiaomi M365 Pro in this video. These accessories can make the Xiaomi look great and help with overall maintenance of the scooter.
⚡️ WATCH NEXT
🛴 Xiaomi videos you must watch: • Important Videos To Wa...
-------------------
🔹 My tools, riding gear + upgrades movelectrics.c...
🔷 My scooter support FB group: bit.ly/2NMeXIY
-------------------
Sound effects/Music Licence: www.epidemicso...
Get Epidemicsounds here: bit.ly/2WglTia
This video is original, made by myself and I go through a detailed process of shooting and producing original content. All opinions I share are my own.
DISCLAIMER: As an Amazon Associate I earn from qualifying purchases.
DISCLAIMER: This video and description might contain affiliate links, which means that if you click on one of the product links, I'll receive a small commission at no additional cost to you.
DISCLAIMER: Always consult your doctor before using any products that are reviewed or mentioned on this channel.
DISCLAIMER: The creator of this channel will not be held responsible for any damages that could arise from acting upon the information that this video contains. The video is for information purposes only.
***My website: movelectrics.com
***Business email: [e-mail]

[@Movelectrics]

⚪️ WATCH NEXT 🛴 Xiaomi videos you must watch bit.ly/35hyUfm 🛴 Xiaomi M365 Pro upgrade videos bit.ly/37mWNoI 🛴 Xiaomi maintenance videos bit.ly/31nxsH9 ⚪️ Product links in description if you want to upgrade your scoot!

[@ShanomoBro]

Just got my cable protectors and the screen cover in this week, checked back for install and as you said, was easy as :) Still waiting on the bumper protector, aliexpress takes it's time for sure heh

[@Movelectrics]

They definitely make the scooter look better 🛴

[@ShanomoBro]

@@Movelectrics I dunno about the pro 1, but the pro 2 has two cables paired with a plastic grip in the middle leading from the top of the stem lock to the deck attachment. Feels good knowing some twig or w/e couldn't get snagged inbetween them now, even if it's a outside chance.

[@ShanomoBro]

@@Movelectrics While you're around, wanted to double check a small thing, I noticed that after tightening everything post-suspension install, that the whole stem has a little give back and forwards due to a 2-4mm gap in-between the suspension braces and stem. That's by design I assume? Yours has the same small gap and slight give?

[@Movelectrics]

I have about 2mm. My stem doesn’t have to much slack but it is normal. I have tried some other scooters and they all have a bit of give. Don’t be worried. Just check it every now and then. Make sure that the middle bolt ain’t too loose or too tight. You want it so that the steering turns with a bit a firmness so that it creates a stable ride 🛴

[@ShanomoBro]

@@Movelectrics Good to know mate, was a tad worried. I checked my middle bolt post install with your vids to help and having no issues with steering thanks to that :) Stay safe out there!🛴

[@scottkent3425]

hi mate just got my scooter last friday and i love it just like your video's keep up the good work and carry on making the vids cheers scotty

[@Movelectrics]

Cheers Scott and safe riding ⚡️

[@virtualdave]

Cable protector added yesterday. Cheers

[@GraemeBreiner]

Very red!! Another great video

[@Movelectrics]

Thanks man!! Yeah I like red haha!! I am looking forward to changing it all to the blue eventually. How is your scoot going?

[@teosto1384]

On the bumper strip, over long term use is the self-adhesive enough or would I be better off adding some super glue as well to give it a longer usage life?

[@Movelectrics]

Hi Teosto! What some people do before installing, is heat up the adhesive part with a hairdryer (low temperature) to make it more sticky. Personally if mine fell off, I would just replace it. Using glue would get very messy ⚡️

[@sergioflores3103]

You mentioned that you would order the rubbers that the brake line goes into in blue. Would like to know what site you use to order your items from, I have’t been able to find a site that sells those in different colors.

[@Movelectrics]

I couldn’t get them in the end. AliExpress is the best for parts.

[@odeniebrown5659]

What benefits do you have from using cable protectors specifically?

[@Movelectrics]

Hi Odenie! They help prevent the cables from getting snagged or damaged. I think they make the scooter look sweet, that was mainly why I got them 🛴

[@odeniebrown5659]

@@Movelectrics thank you . Can I also know if those battery covers people use underneath the scooters are they really good to get or worth getting I should say ?

[@Movelectrics]

Are you talking about the foam people use to help prevent water from getting in? Haven’t used them yet 🛴

[@Movelectrics]

If you ever do scratch underneath the battery compartment, you can easily replace them with original or use custom made covers. Plenty of options 🛴

[@user-kr2tq2kk7w]

Hi mate on my screen it shows f2 do u know what it means

[@Movelectrics]

F2 on a Xiaomi? Could you please join my FB group below and post a picture of the exact error bit.ly/2NMeXIY

[@OzzyZet]

What alcohol are you using in this video, Glen? Isopropyl?

[@Movelectrics]

I just used surgical spirit ⚡️

[@OzzyZet]

@@Movelectrics Thanks!

[@tobyjones1807]

Links for the products in this video?

[@Movelectrics]

Hi Here is a few of them bit.ly/2CzUMbb

[@markjobs5797]

Hello did you order the package that included all the products shown in the video on Amazon

[@Movelectrics]

Hi Mark. The links to all these products are in the video description.

[@markjobs5797]

@@Movelectrics I’m in uk

[@markjobs5797]

@@Movelectrics shall I use the eu link

[@Movelectrics]

Use the UK link 🛴

[@markjobs5797]

@@Movelectrics there is no link for bumper protection for uk could you send me one ?

[@luke8K]

Can you link the exact bumper you have please looks good 👍🏻

[@Movelectrics]

I don’t have the link no more but this looks identical a.aliexpress.com/_m0fTC4S

[@luke8K]

@@Movelectrics to long for shopping on that website im in the uk but thanks

[@Movelectrics]

Amazon would the next place to try ⚡️

[@qadi796]

Hey man have you got the blue parts yet or are they still getting made

[@Movelectrics]

I actually have the blue caps and cable protectors that were custom made. I don’t think I’m gonna be fitting them as I like all the red still. Join my FB group if you want to chat sure bit.ly/2NMeXIY

[@qadi796]

@@Movelectrics ahh so you got used to the red 🤣 yeah I just watched your review and ordered the bumper protector and another few things aswell for my scooter and there gonna be arriving on the 21st so yeah can't wait also I've ordered a monorim v3 which will arrive today so I'm pretty stoked to assemble it

[@Movelectrics]

The suspension is great. Here is the installation video I made, if you need any help, give me a shout 🛴 kzbin.info/www/bejne/oYHZlKKfpc50nrs

[@qadi796]

@@Movelectrics thanks so much man I'll let you know how I'll get on and when I've completed it thanks man

[@Movelectrics]

Sweet!! ⚡️

[@kevindarkstar]

Personally I hate those pointless stickers on the side, those come straight off on mine, looks a lot better, seems like a lot of people are to afraid to remove them.

[@Movelectrics]

The stickers that display the SN and that? Doesn’t bother me man to be honest

[@gsrgsr8525]

Hello can you tell me what this thing called that I can charge my scooter when I’m out so it’s like adopter but for my scooter

[@Movelectrics]

Ryan Longlands do you mean power banks? Personally haven’t used one.

[@gsrgsr8525]

Clear Learning yeah

[@kevindarkstar]

OK so on the front cable and wire, why not remove the small black clip, it's only there to keep the two together anyway which the coil cover does instead, surely it looks better without the original clip, which you can put aside incase you need to replace it.

[@Movelectrics]

Yeah I’m gonna be changing the whole team to blue soon👌🏻 Hope all is well man!

[@kevindarkstar]

@@Movelectrics yeah ta! Guess in that case, but personally I'd of had that sucker off 😜

[@markjobs5797]

Hi just received my bumper protecter was your one quite thin?

[@Movelectrics]

Hi Mark. Yes they are quite thin. Heat it like I did in the video with my hands, or use a hairdryer to make it easier to apply. Clean the surface first like I did in the video, peel of the backing, then push in firmly. Take your time 🛴

[@markjobs5797]

@@Movelectrics I have followed the steps and it is on perfectly cheers 👍

[@Movelectrics]

Brilliant! Well done for fitting it. Makes the scooter look much nicer!

[@markjobs5797]

@@Movelectrics yep thank keep the videos up 👍👍🛴🛴

[@Movelectrics]

No worries at all 🛴

[@nemanja_5943]

I ordered almost everything from AliExpress for my scooter😅

[@Movelectrics]

Sweet!!

[@todd1012]

Another great video dude! Check out berryboards.co.uk, game changer. I have the same wraps, but in blue 🤘🏻😁

[@Movelectrics]

Yeah man they look great!!!